on 03-31-2014 6:22 AM
Hello All,
I have a interface which I will be getting 850 message from EDI system need to map with IDOC and send back the 997 Ack
For getting message from EDI we will be using AS2 adapter and from there we use EDI Separators(850) to map with IDOC and send the the 997 Ack we use different EDI separator(997) finally another AS2 adapter to send back the 997 Ack to EDI system
Just need to know what kind mapping and transformation we use to connect AS2 adapter and EDI Separator where we use the EDI to XML conversion module
Please help me out
Thanking you
Sridhar
Hi,
please check this.
Regards,
Muni.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Muniyappan
Thank you very much ,
My doubt is that we are using 3 adapter module in AS2 sender Comm Channel
1.Classifier: It is for Classifying the EDI version, is it ANSI X12 or EDI FACT or Tradacom or...
2.BIC (Business Integration Converter): It is for doing the E2X (EDI to XML) and X2E (XML to EDI) conversion.
3.Split: This is for splitting the 997 from the 850.
The AS2 adapter will bring multiple message, In that we need to filter 850 message along with 997 Ack
Which adapter module is used to filter ,
Since we might use other messages also like 856 or 810
SO need a clear idea
Thanking yuou
Dear Sridhar
Are you using the Seeburger add-on or SAP's own B2B add-on?
If you are using SAP's own B2B add-on, you should check out the B2B space instead
There are some Learning Series document in that space. For example, the below is for the EDI Separator Adaptor.
http://scn.sap.com/docs/DOC-28948
Rgds
Eng Swee
Hi Eng Swee,
Thanks a lot . That was excellent blog, I am following this blog on;y
My simple doubt as I am new to B2B,
We will be getting multiple EDI Message from AS2 adapter( Sender),Using Dummy interface and receiver Comm Channel EDI Separator the message will put in pipe line
after that as per our requirement we need to use EDI separator channel to processing with IDOC
is it correct , please correct me if I am wrong
Thanking you
Hi Sridhar
If you are expecting to receive different types of EDI messages over the AS2 channel, your setup should be something like that:-
A) One scenario to receive message from AS2
AS2 sender channel -> PI -> EDI separator receiver channel
B) n scenarios to receive each message type created by receiver separator from scenario above
Example:-
EDI separator sender channel (EDI 850) -> PI -> IDoc receiver channel
EDI separator sender channel (EDI 810) -> PI -> IDoc receiver channel
EDI separator sender channel (EDI 856) -> PI -> IDoc receiver channel
....
C) One scenario to return 997 back to sender
EDI separator sender channel (EDI 997) -> PI -> AS2 receiver channel
Rgds
Eng Swee
Hi Sridhar,
based on your previous description
Sridhar Gautham wrote:
My doubt is that we are using 3 adapter module in AS2 sender Comm Channel
1.Classifier: It is for Classifying the EDI version, is it ANSI X12 or EDI FACT or Tradacom or...
2.BIC (Business Integration Converter): It is for doing the E2X (EDI to XML) and X2E (XML to EDI) conversion.
3.Split: This is for splitting the 997 from the 850.
...it looks like you are using the Seeburger-EDI-Adapter with the corresponding modules...so please be aware that the provided links from do not fit to your scenario as they refer to the SAP B2B-AddOn.
However, the Link from is referring to the Seeburger-Adapters.
Kind Regards
Stefan
Hi Stefan,
Thank you,
Thought of going for new blog,
my question is that
Once AS2 adapter( sender) transmits multiple message is this
1.Classifier: It is for Classifying the EDI version, is it ANSI X12 or EDI FACT or Tradacom or...
2.BIC (Business Integration Converter): It is for doing the E2X (EDI to XML) and X2E (XML to EDI) conversion.
3.Split: This is for splitting the 997 from the 850.
we use this following Adapter module , but in this adapter module which one is used to filter message
like 850 EDI ANSI X12
Should we use different (Sender )AS2 adapter for different message ( 810,855, etc) along with adapter module
Thanking you very much
Hello,
Once AS2 adapter( sender) transmits multiple message is this
1.Classifier: It is for Classifying the EDI version, is it ANSI X12 or EDI FACT or Tradacom or...
2.BIC (Business Integration Converter): It is for doing the E2X (EDI to XML) and X2E (XML to EDI) conversion.
3.Split: This is for splitting the 997 from the 850.
The Split-Module is not only splitting 997 from 850, but the Split Module is able to create a new entry for each new ST-Loop in the Inbound ANSI-message.
=> afterwards each splitted message can be processed separately in an own channel.
The following 2 blogs describe such a typical Scenario with the Seeburger-Adapters and how to work with "Classifier/Bic/Split"-Setup
Kind Regards
Stefan
User | Count |
---|---|
86 | |
10 | |
10 | |
9 | |
7 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.