cancel
Showing results for 
Search instead for 
Did you mean: 

Dispatcher disp+work.exe process starts but dies

Former Member
0 Kudos

Hi all

I recently installed Netweaver2004s without any issues in a lab/test environment. The system was successfully running for a few weeks but a recently when I try to log on tthe system I get a WSAECONNREFUSED error message

In SAPMMC the MessageServer (msg_server.exe) is green and running, so is the IGS but the Dispatcher (disp+work.EXE) starts (yellow light) and runs for about a minute and then stops.

I have tried the following:

Reboot of server

Restart SAP instance

Pinging host – connection is OK

Checked services – all SAP services are running

Checked entries in hosts/services file

Cleared all event logs including ACEEvent log

Uninstalled and reinstalled all components

The loopback connector is installed and operating OK

I’m not sure what the issue could be everything was running OK, there were no config changes or new applications installed on the server before the issue occurred.

I’m fairly new to SAP Basis and any help will be greatly appreciated !!

I have included the contents of the dispatcher trace and the CPIC trace

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>.

*

  • LOCATION CPIC (TCP/IP) on local host

  • ERROR partner 'mem100:3302' not reached

*

  • TIME Sun Jan 15 20:47:00 2006

  • RELEASE 700

  • COMPONENT NI (network interface)

  • VERSION 38

  • RC -10

  • MODULE nixxi.cpp

  • LINE 2736

  • DETAIL NiPConnect2

  • SYSTEM CALL connect

  • ERRNO 10061

  • ERRNO TEXT WSAECONNREFUSED: Connection refused

  • COUNTER 29

>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Dispatcher trace dev_disp

-


trc file: "dev_disp", trc level: 1, release: "700"

-


sysno 01

sid MEM

systemid 560 (PC with Windows NT)

relno 7000

patchlevel 0

patchno 33

intno 20050900

make: multithreaded, ASCII

pid 3172

Sun Jan 15 20:33:34 2006

kernel runs with dp version 206(ext=109) (@(#) DPLIB-INT-VERSION-206)

length of sys_adm_ext is 360 bytes

      • SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (01 3172) [dpxxdisp.c 1226]

shared lib "dw_xml.dll" version 33 successfully loaded

shared lib "dw_xtc.dll" version 33 successfully loaded

shared lib "dw_stl.dll" version 33 successfully loaded

shared lib "dw_gui.dll" version 33 successfully loaded

rdisp/softcancel_sequence : -> 0,5,-1

use internal message server connection to port 3901

Sun Jan 15 20:33:39 2006

      • WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5213]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is not active

DpShMCreate: sizeof(wp_adm) 6160 (880)

DpShMCreate: sizeof(tm_adm) 3351072 (16672)

DpShMCreate: sizeof(wp_ca_adm) 18000 (60)

DpShMCreate: sizeof(appc_ca_adm) 6000 (60)

DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048

DpShMCreate: sizeof(comm_adm) 528048 (1048)

DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

DpShMCreate: sizeof(file_adm) 0 (72)

DpShMCreate: sizeof(vmc_adm) 0 (1088)

DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: SHM_DP_ADM_KEY (addr: 05980040, size: 3972824)

DpShMCreate: allocated sys_adm at 05980040

DpShMCreate: allocated wp_adm at 059819C8

DpShMCreate: allocated tm_adm_list at 059831D8

DpShMCreate: allocated tm_adm at 05983208

DpShMCreate: allocated wp_ca_adm at 05CB5428

DpShMCreate: allocated appc_ca_adm at 05CB9A78

DpShMCreate: allocated comm_adm at 05CBB1E8

DpShMCreate: system runs without file table

DpShMCreate: allocated vmc_adm_list at 05D3C098

DpShMCreate: allocated gw_adm at 05D3C0D8

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated ca_info at 05D3C108

DpShMCreate: allocated wall_adm at 05D3C110

MBUF state OFF

EmInit: MmSetImplementation( 2 ).

MM diagnostic options set: 0

<ES> client 0 initializing ....

<ES> InitFreeList

<ES> block size is 1024 kByte.

Using implementation flat

<EsNT> Memory Reset disabled as NT default

<ES> 511 blocks reserved for free list.

ES initialized.

J2EE server info

start = TRUE

state = STARTED

pid = 3464

argv[0] = C:\usr\sap\MEM\DVEBMGS01\exe\jcontrol.EXE

argv[1] = C:\usr\sap\MEM\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=C:\usr\sap\MEM\SYS\profile\MEM_DVEBMGS01_mem100

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=1053

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=MEM

argv[7] = -DSAPMYNAME=mem100_MEM_01

argv[8] = -DSAPPROFILE=C:\usr\sap\MEM\SYS\profile\MEM_DVEBMGS01_mem100

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG Q0K=> DpMsAttach, mscon ( mem100) [dpxxdisp.c 11163]

Sun Jan 15 20:33:40 2006

CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

CCMS: Initalizing shared memory of size 40000000 for monitoring segment.

Sun Jan 15 20:33:41 2006

CCMS: start to initalize 3.X shared alert area (first segment).

DpMsgAdmin: Set release to 7000, patchlevel 0

MBUF state PREPARED

MBUF component UP

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]

DpMsgAdmin: Set patchno for this platform to 33

Release check o.K.

DpJ2eeLogin: j2ee state = CONNECTED

Sun Jan 15 20:34:20 2006

      • ERROR => W0 (pid 3480) died [dpxxdisp.c 13748]

      • ERROR => W1 (pid 3488) died [dpxxdisp.c 13748]

my types changed after wp death/restart 0xbf --> 0xbe

      • ERROR => W2 (pid 3496) died [dpxxdisp.c 13748]

my types changed after wp death/restart 0xbe --> 0xbc

      • ERROR => W3 (pid 3504) died [dpxxdisp.c 13748]

my types changed after wp death/restart 0xbc --> 0xb8

      • ERROR => W4 (pid 3512) died [dpxxdisp.c 13748]

my types changed after wp death/restart 0xb8 --> 0xb0

      • ERROR => W5 (pid 3520) died [dpxxdisp.c 13748]

my types changed after wp death/restart 0xb0 --> 0xa0

      • ERROR => W6 (pid 3528) died [dpxxdisp.c 13748]

my types changed after wp death/restart 0xa0 --> 0x80

      • DP_FATAL_ERROR => DpWPCheck: no more work processes

      • DISPATCHER EMERGENCY SHUTDOWN ***

increase tracelevel of WPs

killing W0-3480 (SIGUSR2)

      • ERROR => DpWpKill(3480, SIGUSR2) failed [dpxxtool.c 2586]

killing W1-3488 (SIGUSR2)

      • ERROR => DpWpKill(3488, SIGUSR2) failed [dpxxtool.c 2586]

killing W2-3496 (SIGUSR2)

      • ERROR => DpWpKill(3496, SIGUSR2) failed [dpxxtool.c 2586]

killing W3-3504 (SIGUSR2)

      • ERROR => DpWpKill(3504, SIGUSR2) failed [dpxxtool.c 2586]

killing W4-3512 (SIGUSR2)

      • ERROR => DpWpKill(3512, SIGUSR2) failed [dpxxtool.c 2586]

killing W5-3520 (SIGUSR2)

      • ERROR => DpWpKill(3520, SIGUSR2) failed [dpxxtool.c 2586]

killing W6-3528 (SIGUSR2)

      • ERROR => DpWpKill(3528, SIGUSR2) failed [dpxxtool.c 2586]

NiWait: sleep (10000ms) ...

NiISelect: timeout 10000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:30 2006

NiISelect: TIMEOUT occured (10000ms)

dump system status

Workprocess Table (long) Sun Jan 15 20:34:30 2006

========================

No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table

-


0 DIA 3480 Ended no 1 0 0

1 DIA 3488 Ended no 1 0 0

2 UPD 3496 Ended no 1 0 0

3 ENQ 3504 Ended no 1 0 0

4 BTC 3512 Ended no 1 0 0

5 SPO 3520 Ended no 1 0 0

6 UP2 3528 Ended no 1 0 0

Dispatcher Queue Statistics Sun Jan 15 20:34:30 2006

===========================

--------


+
+

+

+
--


+

Typ

now

high

max

writes

reads

--------


+
+

+

+
--


+

NOWP

0

2

2000

6

6

--------


+
+

+

+
--


+

DIA

6

6

2000

6

0

--------


+
+

+

+
--


+

UPD

0

0

2000

0

0

--------


+
+

+

+
--


+

ENQ

0

0

2000

0

0

--------


+
+

+

+
--


+

BTC

0

0

2000

0

0

--------


+
+

+

+
--


+

SPO

0

0

2000

0

0

--------


+
+

+

+
--


+

UP2

0

0

2000

0

0

--------


+
+

+

+
--


+

max_rq_id 12

wake_evt_udp_now 0

wake events total 8, udp 7 ( 87%), shm 1 ( 12%)

since last update total 8, udp 7 ( 87%), shm 1 ( 12%)

Dump of tm_adm structure: Sun Jan 15 20:34:30 2006

=========================

Term uid man user term lastop mod wp ta a/i (modes)

Workprocess Comm. Area Blocks Sun Jan 15 20:34:30 2006

=============================

Slots: 300, Used: 2, Max: 1

--------


+
+
--


+

id

owner

pid

eyecatcher

--------


+
+
--


+

0

DISPATCHER

-1

WPCAAD000

1

DISPATCHER

-1

WPCAAD001

NiWait: sleep (5000ms) ...

NiISelect: timeout 5000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:35 2006

NiISelect: TIMEOUT occured (5000ms)

Shutdown server ...

DpJ2eeDisableRestart

MsIDelService: delete service J2EE for myself

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)

MsINiWrite: sent 161 bytes

send msg (len 110+51) to name MSG_SERVER, type 0, key -

MsSndName: MS_DEL_PROPERTY ok

Send 51 bytes to MSG_SERVER

MS_DEL_PROPERTY : asynchronous call

send MsDelService(J2EE) to msgserver

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3464)

killing process (3464) (SOFT_KILL)

DpIJ2eeShutdown: j2ee state = SHUTDOWN

NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0

SiSelNSet: set events of sock 1568 to: ---

NiBufISelRemove: remove hdl 4 from set0

SiSelNRemove: removed sock 1568 (pos=2)

SiSelNRemove: removed sock 1568

NiSelIRemove: removed hdl 4

DpDelSocketInfo: del info for socket 4 (type=8)

NiICloseHandle: shutdown and close hdl 4 / sock 1568

NiBufIClose: clear extension for hdl 4

DpModState: buffer in state MBUF_PREPARED

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIModState: change state to SHUTDOWN

DpModState: change server state from STARTING to SHUTDOWN

Switch off Shared memory profiling

ShmProtect( 57, 3 )

ShmProtect(SHM_PROFILE, SHM_PROT_RW

ShmProtect( 57, 1 )

ShmProtect(SHM_PROFILE, SHM_PROT_RD

DpWakeUpWps: wake up all wp's

Stop work processes

Stop gateway

killing process (3444) (SOFT_KILL)

Stop icman

killing process (3452) (SOFT_KILL)

Terminate gui connections

wait for end of work processes

wait for end of gateway

[DpProcDied] Process lives (PID:3444 HANDLE:1640)

waiting for termination of gateway ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:36 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process died (PID:3444 HANDLE:1640)

wait for end of icman

[DpProcDied] Process lives (PID:3452 HANDLE:1644)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:37 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3452 HANDLE:1644)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:38 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3452 HANDLE:1644)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:39 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3452 HANDLE:1644)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:40 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3452 HANDLE:1644)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:41 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3452 HANDLE:1644)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:42 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3452 HANDLE:1644)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:43 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3452 HANDLE:1644)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:44 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3452 HANDLE:1644)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:45 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3452 HANDLE:1644)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:46 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3452 HANDLE:1644)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1669

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Jan 15 20:34:47 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process died (PID:3452 HANDLE:1644)

[DpProcDied] Process died (PID:3464 HANDLE:1624)

NiIMyHostName: hostname = 'mem100'

AdGetSelfIdentRecord: > <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0

DpConvertRequest: net size = 189 bytes

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)

MsINiWrite: sent 562 bytes

send msg (len 110+452) to name -, type 4, key -

detach from message server

***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11447]

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIDetach: send logout to msg_server

MsIDetach: call exit function

DpMsShutdownHook called

NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0

SiSelNSet: set events of sock 1592 to: ---

NiBufISelRemove: remove hdl 3 from set0

SiSelNRemove: removed sock 1592 (pos=3)

SiSelNRemove: removed sock 1592

NiSelIRemove: removed hdl 3

MBUF state OFF

AdGetSelfIdentRecord: > <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/7

LOCK WP ca_blk 2

make DISP owner of wp_ca_blk 2

DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)

MBUF component DOWN

NiICloseHandle: shutdown and close hdl 3 / sock 1592

NiBufIClose: clear extension for hdl 3

MsIDetach: detach MS-system

cleanup EM

EsCleanup ....

EmCleanup() -> 0

Es2Cleanup: Cleanup ES2

***LOG Q05=> DpHalt, DPStop ( 3172) [dpxxdisp.c 9836]

Good Bye .....

Accepted Solutions (0)

Answers (11)

Answers (11)

Former Member
0 Kudos

Dear all expert,

need your help urgently. i have a machine currently has a development system(D) and it is working fine. now im installing the testing system(Q) ECC6 in the same box. the problem is, the installation stop at stage 30th. the machine is using Oracle. from the MMC i can start the Q instance but its Dispatcher+work.exe will stop after a while.the log file is as below. please help and thank you

-


trc file: "dev_disp", trc level: 1, release: "700"

-


sysno 02

sid FBQ

systemid 561 (PC with Windows NT)

relno 7000

patchlevel 0

patchno 179

intno 20050900

make: multithreaded, Unicode, 64 bit, optimized

pid 6508

Wed Feb 25 19:51:45 2009

kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)

length of sys_adm_ext is 576 bytes

      • SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (02 6508) [dpxxdisp.c 1285]

shared lib "dw_xml.dll" version 179 successfully loaded

shared lib "dw_xtc.dll" version 179 successfully loaded

shared lib "dw_stl.dll" version 179 successfully loaded

shared lib "dw_gui.dll" version 179 successfully loaded

shared lib "dw_mdm.dll" version 179 successfully loaded

rdisp/softcancel_sequence : -> 0,5,-1

use internal message server connection to port 3902

Wed Feb 25 19:51:50 2009

      • WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is not active

DpIPCInit2: start server >SAPFBWDEV01_FBQ_02 <

DpShMCreate: sizeof(wp_adm) 29792 (1752)

DpShMCreate: sizeof(tm_adm) 5912704 (29416)

DpShMCreate: sizeof(wp_ca_adm) 24064 (80)

DpShMCreate: sizeof(appc_ca_adm) 8000 (80)

DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080

DpShMCreate: sizeof(comm_adm) 552080 (1088)

DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

DpShMCreate: sizeof(slock_adm) 0 (104)

DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

DpShMCreate: sizeof(file_adm) 0 (72)

DpShMCreate: sizeof(vmc_adm) 0 (1864)

DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000187C0050, size: 6614016)

DpShMCreate: allocated sys_adm at 00000000187C0050

DpShMCreate: allocated wp_adm at 00000000187C21F0

DpShMCreate: allocated tm_adm_list at 00000000187C9650

DpShMCreate: allocated tm_adm at 00000000187C96B0

DpShMCreate: allocated wp_ca_adm at 0000000018D6CF30

DpShMCreate: allocated appc_ca_adm at 0000000018D72D30

DpShMCreate: allocated comm_adm at 0000000018D74C70

DpShMCreate: system runs without slock table

DpShMCreate: system runs without file table

DpShMCreate: allocated vmc_adm_list at 0000000018DFB900

DpShMCreate: allocated gw_adm at 0000000018DFB980

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated ca_info at 0000000018DFB9B0

DpShMCreate: allocated wall_adm at 0000000018DFB9C0

MBUF state OFF

DpCommInitTable: init table for 500 entries

rdisp/queue_size_check_value : -> off

ThTaskStatus: rdisp/reset_online_during_debug 0

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> InitFreeList

<ES> block size is 4096 kByte.

<ES> Info: em/initial_size_MB( 8170MB) not multiple of em/blocksize_KB( 4096KB)

<ES> Info: em/initial_size_MB rounded up to 8172MB

Using implementation view

<EsNT> Using memory model view.

<EsNT> Memory Reset disabled as NT default

<ES> 2042 blocks reserved for free list.

ES initialized.

mm.dump: set maximum dump mem to 96 MB

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1692]

***LOG Q0K=> DpMsAttach, mscon ( SAPFBWDEV01) [dpxxdisp.c 12408]

DpStartStopMsg: send start message (myname is >SAPFBWDEV01_FBQ_02 <)

DpStartStopMsg: start msg sent

CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

CCMS: Initalizing shared memory of size 60000000 for monitoring segment.

CCMS: Checking Downtime Configuration of Monitoring Segment.

CCMS: start to initalize 3.X shared alert area (first segment).

DpMsgAdmin: Set release to 7000, patchlevel 0

MBUF state PREPARED

MBUF component UP

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]

DpMsgAdmin: Set patchno for this platform to 179

Release check o.K.

Wed Feb 25 19:52:30 2009

my types changed after wp death/restart 0xbf --> 0xbe

my types changed after wp death/restart 0xbe --> 0xbc

my types changed after wp death/restart 0xbc --> 0xb8

my types changed after wp death/restart 0xb8 --> 0xb0

my types changed after wp death/restart 0xb0 --> 0xa0

my types changed after wp death/restart 0xa0 --> 0x80

      • DP_FATAL_ERROR => DpWPCheck: no more work processes

      • DISPATCHER EMERGENCY SHUTDOWN ***

increase tracelevel of WPs

NiWait: sleep (10000ms) ...

NiISelect: timeout 10000ms

NiISelect: maximum fd=1517

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Feb 25 19:52:40 2009

NiISelect: TIMEOUT occured (10000ms)

dump system status

Workprocess Table (long) Wed Feb 25 11:52:40 2009

========================

No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table

-


0 DIA 7876 Ended no 1 0 0

1 DIA 5152 Ended no 1 0 0

2 DIA 7152 Ended no 1 0 0

3 DIA 6488 Ended no 1 0 0

4 DIA 7892 Ended no 1 0 0

5 DIA 6528 Ended no 1 0 0

6 DIA 7332 Ended no 1 0 0

7 DIA 5144 Ended no 1 0 0

8 DIA 616 Ended no 1 0 0

9 DIA 6344 Ended no 1 0 0

10 UPD 5436 Ended no 1 0 0

11 ENQ 7556 Ended no 1 0 0

12 BTC 6132 Ended no 1 0 0

13 BTC 7652 Ended no 1 0 0

14 BTC 7480 Ended no 1 0 0

15 SPO 3040 Ended no 1 0 0

16 UP2 7796 Ended no 1 0 0

Dispatcher Queue Statistics Wed Feb 25 11:52:40 2009

===========================

--------


+
+

+

+
--


+

Typ

now

high

max

writes

reads

--------


+
+

+

+
--


+

NOWP

0

2

2000

5

5

--------


+
+

+

+
--


+

DIA

5

5

2000

5

0

--------


+
+

+

+
--


+

UPD

0

0

2000

0

0

--------


+
+

+

+
--


+

ENQ

0

0

2000

0

0

--------


+
+

+

+
--


+

BTC

0

0

2000

0

0

--------


+
+

+

+
--


+

SPO

0

0

2000

0

0

--------


+
+

+

+
--


+

UP2

0

0

2000

0

0

--------


+
+

+

+
--


+

max_rq_id 12

wake_evt_udp_now 0

wake events total 8, udp 6 ( 75%), shm 2 ( 25%)

since last update total 8, udp 6 ( 75%), shm 2 ( 25%)

Dump of tm_adm structure: Wed Feb 25 11:52:40 2009

=========================

Term uid man user term lastop mod wp ta a/i (modes)

Workprocess Comm. Area Blocks Wed Feb 25 11:52:40 2009

=============================

Slots: 300, Used: 1, Max: 0

--------


+
+
--


+

id

owner

pid

eyecatcher

--------


+
+
--


+

0

DISPATCHER

-1

WPCAAD000

NiWait: sleep (5000ms) ...

NiISelect: timeout 5000ms

NiISelect: maximum fd=1517

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Feb 25 19:52:45 2009

NiISelect: TIMEOUT occured (5000ms)

DpHalt: shutdown server >SAPFBWDEV01_FBQ_02 < (normal)

DpJ2eeDisableRestart

DpModState: buffer in state MBUF_PREPARED

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIModState: change state to SHUTDOWN

DpModState: change server state from STARTING to SHUTDOWN

Switch off Shared memory profiling

ShmProtect( 57, 3 )

ShmProtect(SHM_PROFILE, SHM_PROT_RW

ShmProtect( 57, 1 )

ShmProtect(SHM_PROFILE, SHM_PROT_RD

DpWakeUpWps: wake up all wp's

Stop work processes

Stop gateway

killing process (5260) (SOFT_KILL)

Stop icman

killing process (5092) (SOFT_KILL)

Terminate gui connections

wait for end of work processes

wait for end of gateway

[DpProcDied] Process lives (PID:5260 HANDLE:1484)

waiting for termination of gateway ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1517

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Feb 25 19:52:46 2009

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process died (PID:5260 HANDLE:1484)

wait for end of icman

[DpProcDied] Process lives (PID:5092 HANDLE:1492)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1517

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Feb 25 19:52:47 2009

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:5092 HANDLE:1492)

DpStartStopMsg: send stop message (myname is >SAPFBWDEV01_FBQ_02 <)

AdGetSelfIdentRecord: > <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0

DpConvertRequest: net size = 189 bytes

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)

MsINiWrite: sent 562 bytes

send msg (len 110+452) to name -, type 4, key -

DpStartStopMsg: stop msg sent

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 recv would block (errno=EAGAIN)

NiIRead: read for hdl 2 timed out (0ms)

DpHalt: no more messages from the message server

DpHalt: send keepalive to synchronize with the message server

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)

MsINiWrite: sent 114 bytes

send msg (len 110+4) to name MSG_SERVER, type 0, key -

MsSndName: MS_NOOP ok

Send 4 bytes to MSG_SERVER

NiIRead: hdl 2 recv would block (errno=EAGAIN)

NiIPeek: peek successful for hdl 2 (r)

NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -

Received 4 bytes from MSG_SERVER

Received opcode MS_NOOP from msg_server, reply MSOP_OK

MsOpReceive: ok

MsSendKeepalive : keepalive sent to message server

NiIRead: hdl 2 recv would block (errno=EAGAIN)

Wed Feb 25 19:52:58 2009

NiIPeek: peek for hdl 2 timed out (r; 1000ms)

NiIRead: read for hdl 2 timed out (1000ms)

DpHalt: no more messages from the message server

DpHalt: sync with message server o.k.

detach from message server

***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12754]

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIDetach: send logout to msg_server

MsIDetach: call exit function

DpMsShutdownHook called

NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0

SiSelNSet: set events of sock 1408 to: ---

NiBufISelRemove: remove hdl 2 from set0

SiSelNRemove: removed sock 1408 (pos=2)

SiSelNRemove: removed sock 1408

NiSelIRemove: removed hdl 2

MBUF state OFF

AdGetSelfIdentRecord: > <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17

LOCK WP ca_blk 1

make DISP owner of wp_ca_blk 1

DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)

MBUF component DOWN

NiICloseHandle: shutdown and close hdl 2 / sock 1408

NiBufIClose: clear extension for hdl 2

MsIDetach: detach MS-system

cleanup EM

EsCleanup ....

EmCleanup() -> 0

Es2Cleanup: Cleanup ES2

***LOG Q05=> DpHalt, DPStop ( 6508) [dpxxdisp.c 10952]

Good Bye .....

0 Kudos

Hello all,

Really long forum about problems, but did you all checks prerequisites at installation?

It looks like you are facing some communication problem between SAP and DB through ports.

So please check if you have entries at "services" like this one>>

  1. NSP - local SAP system Peter Nechala

sapdp00 3200/tcp # SAP System Dispatcher Port

sapgw00 3300/tcp # SAP System Gateway Port

sapmsNSP 3600/tcp # SAP System Message Server Port

sapdp00s 4700/tcp # SAP System Dispatcher Security Port

sapgw00s 4800/tcp # SAP System Gateway Security Port

Services is located at "c:\Windows\System32\drivers\etc\"

In case you have still problems provide me log file of you dev_w* so log of workprocess located at

"....NSP\DVEBMGS00\work\"

Best regards,

Peter Nechala

Former Member
0 Kudos

Hi Peter,

thank you for your response. i have check the service file and found these

sapmsFBD 3600/tcp -> this system is working

sapmsFBQ 3602/tcp # SAP System Message Server Port->this system is not working!

the ports that you have mentioned all are in the service as well.the log file for dev_w16 is as below:

-


trc file: "dev_w16", trc level: 1, release: "700"

-


*

  • ACTIVE TRACE LEVEL 1

  • ACTIVE TRACE COMPONENTS all, MJ

*

B

B Thu Feb 26 16:52:42 2009

B create_con (con_name=R/3)

B Loading DB library 'D:\usr\sap\FBQ\DVEBMGS02\exe\dboraslib.dll' ...

B Library 'D:\usr\sap\FBQ\DVEBMGS02\exe\dboraslib.dll' loaded

B Version of 'D:\usr\sap\FBQ\DVEBMGS02\exe\dboraslib.dll' is "700.08", patchlevel (0.167)

B New connection 0 created

M sysno 02

M sid FBQ

M systemid 561 (PC with Windows NT)

M relno 7000

M patchlevel 0

M patchno 179

M intno 20050900

M make: multithreaded, Unicode, 64 bit, optimized

M pid 7596

M

M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)

M length of sys_adm_ext is 576 bytes

M ***LOG Q0Q=> tskh_init, WPStart (Workproc16 7596) [dpxxdisp.c 1347]

I MtxInit: 30000 0 0

M DpSysAdmExtCreate: ABAP is active

M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

M DpShMCreate: sizeof(wp_adm) 29792 (1752)

M DpShMCreate: sizeof(tm_adm) 5912704 (29416)

M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)

M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)

M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080

M DpShMCreate: sizeof(comm_adm) 552080 (1088)

M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

M DpShMCreate: sizeof(slock_adm) 0 (104)

M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

M DpShMCreate: sizeof(file_adm) 0 (72)

M DpShMCreate: sizeof(vmc_adm) 0 (1864)

M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)

M DpShMCreate: sizeof(gw_adm) 48

M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000001C7C0050, size: 6614016)

M DpShMCreate: allocated sys_adm at 000000001C7C0050

M DpShMCreate: allocated wp_adm at 000000001C7C21F0

M DpShMCreate: allocated tm_adm_list at 000000001C7C9650

M DpShMCreate: allocated tm_adm at 000000001C7C96B0

M DpShMCreate: allocated wp_ca_adm at 000000001CD6CF30

M DpShMCreate: allocated appc_ca_adm at 000000001CD72D30

M DpShMCreate: allocated comm_adm at 000000001CD74C70

M DpShMCreate: system runs without slock table

M DpShMCreate: system runs without file table

M DpShMCreate: allocated vmc_adm_list at 000000001CDFB900

M DpShMCreate: allocated gw_adm at 000000001CDFB980

M DpShMCreate: system runs without vmc_adm

M DpShMCreate: allocated ca_info at 000000001CDFB9B0

M DpShMCreate: allocated wall_adm at 000000001CDFB9C0

M rdisp/queue_size_check_value : -> off

M ThTaskStatus: rdisp/reset_online_during_debug 0

X EmInit: MmSetImplementation( 2 ).

X MM global diagnostic options set: 0

X <ES> client 16 initializing ....

X Using implementation view

X <EsNT> Using memory model view.

M <EsNT> Memory Reset disabled as NT default

X ES initialized.

X mm.dump: set maximum dump mem to 96 MB

M ThInit: running on host SAPFBWDEV01

M calling db_connect ...

C Prepending D:\usr\sap\FBQ\DVEBMGS02\exe to Path.

C Oracle Client Version: '10.2.0.2.0'

C Client NLS settings: AMERICAN_AMERICA.UTF8

C Logon as OPS$-user to get SAPSR3's password

C Connecting as /@FBQ on connection 0 (nls_hdl 0) ... (dbsl 700 030508)

C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch

C 0 UTF8 1 000000001E5770C0 00000000105BB340 00000000105C0B68

C Attaching to DB Server FBQ (con_hdl=0,svchp=00000000105C0A28,srvhp=000000001E597118)

C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12505

[dboci.c 4313]

C *** ERROR => CONNECT failed with sql error '12505'

[dbsloci.c 11145]

C Try to connect with default password

C Connecting as SAPSR3/<pwd>@FBQ on connection 0 (nls_hdl 0) ... (dbsl 700 030508)

C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch

C 0 UTF8 1 000000001E5770C0 00000000105BB340 00000000105C0B68

C Detaching from DB Server (con_hdl=0,svchp=00000000105C0A28,srvhp=000000001E597118)

C Attaching to DB Server FBQ (con_hdl=0,svchp=00000000105C0A28,srvhp=000000001E597118)

C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12505

[dboci.c 4313]

C *** ERROR => CONNECT failed with sql error '12505'

[dbsloci.c 11145]

B ***LOG BY2=> sql error 12505 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]

B ***LOG BY0=> ORA-12505: TNS:listener does not currently know of SID given in connect descriptor [dbsh#2 @ 1204] [dbsh 1204 ]

B ***LOG BY2=> sql error 12505 performing CON [dblink#5 @ 431] [dblink 0431 ]

B ***LOG BY0=> ORA-12505: TNS:listener does not currently know of SID given in connect descriptor [dblink#5 @ 431] [dblink 0431 ]

M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]

M in_ThErrHandle: 1

M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10534]

M

M Info for wp 16

M

M pid = 7596

M severity = 0

M status = 0

M stat = WP_RUN

M waiting_for = NO_WAITING

M reqtype = DP_RQ_VB2WP

M act_reqtype = NO_REQTYPE

M rq_info = 0

M tid = -1

M mode = 255

M len = -1

M rq_id = 65535

M rq_source =

M last_tid = 0

M last_mode = 0

M semaphore = 0

M act_cs_count = 0

M csTrack = 0

M csTrackRwExcl = 0

M csTrackRwShrd = 0

M mode_cleaned_counter = 0

M control_flag = 0

M int_checked_resource(RFC) = 0

M ext_checked_resource(RFC) = 0

M int_checked_resource(HTTP) = 0

M ext_checked_resource(HTTP) = 0

M report = > <

M action = 0

M tab_name = > <

M attachedVm = no VM

M

M *****************************************************************************

M *

M * LOCATION SAP-Server SAPFBWDEV01_FBQ_02 on host SAPFBWDEV01 (wp 16)

M * ERROR ThInit: db_connect

M *

M * TIME Thu Feb 26 16:52:42 2009

M * RELEASE 700

M * COMPONENT Taskhandler

M * VERSION 1

M * RC 13

M * MODULE thxxhead.c

M * LINE 10754

M * COUNTER 1

M *

M *****************************************************************************

M

M PfStatDisconnect: disconnect statistics

M Entering TH_CALLHOOKS

M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP

M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP

M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]

M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]

M Entering ThSetStatError

M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)

M Entering ThReadDetachMode

M call ThrShutDown (1)...

M ***LOG Q02=> wp_halt, WPStop (Workproc16 7596) [dpnttool.c 333]

Former Member
0 Kudos

I recently installed Solution Manager 4.0 on Netweaver 2004s and I was experiencing the same problem. Work process 0 kept restarting every 2 minutes and I received similar errors. I am running windows with Zero Memory Management. The install put a parameter in PHYS_MEMSIZE = 512. I commented this out and restarted the server and my the dispatcher process is no longer restarting. This parameter was limiting SAP to 512 and essentially crippling the ZMM capabilities. If your running Unix try setting it to a sufficiently large number since ZMM is not an option for Unix. I hope this helps.

former_member185954
Active Contributor
0 Kudos

PHYS_MEMSIZE is only valid for windows and is related to zero memory management.

When you set zero memory management for windows, you define how much memory should be available to SAP by this parameter.

If this parameter is not set, SAP assumes that whole of the main memory is available and if need arises starts making use of the PAGE file.

for more information check this link:

<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/84/7ed384d81f11d188be0000e83539c3/frameset.htm">Zero memory management Implementation on Windows</a>

Regards,

Siddhesh

Former Member
0 Kudos

Hi,

Post dev_w0

Regrds

Umesh K

Former Member
0 Kudos

Hi Umesh,

Please find below dev_wo trace file. Also, let me know step by step method if you have any solution as I am novice to BASIS. Appreciate your time and efforts.

-


trc file: "dev_w0", trc level: 1, release: "700"

-


*

  • ACTIVE TRACE LEVEL 1

  • ACTIVE TRACE COMPONENTS all, MJ

*

B

B Fri Dec 15 23:34:34 2006

B create_con (con_name=R/3)

B Loading DB library 'E:\usr\sap\BI1\DVEBMGS01\exe\dbsdbslib.dll' ...

B Library 'E:\usr\sap\BI1\DVEBMGS01\exe\dbsdbslib.dll' loaded

B Version of 'E:\usr\sap\BI1\DVEBMGS01\exe\dbsdbslib.dll' is "700.08", patchlevel (0.51)

B New connection 0 created

M sysno 01

M sid BI1

M systemid 560 (PC with Windows NT)

M relno 7000

M patchlevel 0

M patchno 52

M intno 20050900

M make: multithreaded, Unicode, optimized

M pid 3876

M

M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)

M length of sys_adm_ext is 572 bytes

M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3876) [dpxxdisp.c 1293]

I MtxInit: 30000 0 0

M DpSysAdmExtCreate: ABAP is active

M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

M

M Fri Dec 15 23:34:35 2006

M DpShMCreate: sizeof(wp_adm) 12672 (1408)

M DpShMCreate: sizeof(tm_adm) 3954072 (19672)

M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)

M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)

M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064

M DpShMCreate: sizeof(comm_adm) 528064 (1048)

M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

M DpShMCreate: sizeof(file_adm) 0 (72)

M DpShMCreate: sizeof(vmc_adm) 0 (1452)

M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)

M DpShMCreate: sizeof(gw_adm) 48

M DpShMCreate: SHM_DP_ADM_KEY (addr: 060B0040, size: 4607512)

M DpShMCreate: allocated sys_adm at 060B0040

M DpShMCreate: allocated wp_adm at 060B1E28

M DpShMCreate: allocated tm_adm_list at 060B4FA8

M DpShMCreate: allocated tm_adm at 060B4FD8

M DpShMCreate: allocated wp_ca_adm at 0647A570

M DpShMCreate: allocated appc_ca_adm at 06480330

M DpShMCreate: allocated comm_adm at 06482270

M DpShMCreate: system runs without file table

M DpShMCreate: allocated vmc_adm_list at 06503130

M DpShMCreate: allocated gw_adm at 06503170

M DpShMCreate: system runs without vmc_adm

M DpShMCreate: allocated ca_info at 065031A0

M DpShMCreate: allocated wall_adm at 065031A8

X EmInit: MmSetImplementation( 2 ).

X MM diagnostic options set: 0

X <ES> client 0 initializing ....

X Using implementation flat

M <EsNT> Memory Reset disabled as NT default

X ES initialized.

M ThInit: running on host ootspdbs01

M calling db_connect ...

C

C DBSDBSLIB : version 700.08, patch 0.051 (Make PL 0.52)

C MAXDB shared library (dbsdbslib) patchlevels (last 10)

C (0.051) DB50 perm block defect (note 934194)

C (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)

C (0.045) Signal 11 during creation of BIA index (note 920743)

C (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)

C (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)

C (0.028) Disable LVC codepage checking (note 882788)

C (0.019) UPDSTAT optimized (note 870327)

C (0.010) MaxDB DBSL patch collection 1 2005 (note 850830)

C (0.009) New stream compression available with LVC 7.6.0 b12 (note 835809)

C (0.008) Support of SDBUPDEXCL (note 847616)

C

C

C Loading SQLDBC client runtime ...

C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965

C SQLDBC Library Version : libSQLDBC 7.6.0 BUILD 018-123-119-055

C SQLDBC client runtime is MaxDB 7.6.0.018 CL 119055

C SQLDBC supports new DECIMAL interface : 0

C INFO : SQLOPT= -I 0 -t 0

C Try to connect (DEFAULT) on connection 0 ...

C

C Fri Dec 15 23:34:36 2006

C Attach to SAP DB : Kernel 7.6.00 Build 018-123-119-055

C Database release is SAP DB 7.6.00.018

C INFO : Database 'BI1' instance is running on 'ootspdbs01'

C INFO : SAP DB Packet_Size = 131072

C INFO : SAP DB Min_Reply_Size = 4096

C INFO : SAP DB Comm_Size = 126976

C INFO : DBSL buffer size = 126976

C INFO : SAP DB MaxLocks = 300000

C INFO : Connect to DB as 'SAPBI1'

C Command info enabled

C Now I'm connected to SAP DB

C 00: ootspdbs01-BI1, since=20061215233435, ABAP= <unknown> (0)

B Connection 0 opened (DBSL handle 0)

B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost

B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20061215 233435 ootspdbs01

C INFO : SAP RELEASE (DB) = 700

M db_connect o.k.

M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif

I

I Fri Dec 15 23:34:56 2006

I MtxInit: 0 0 0

M SHM_PRES_BUF (addr: 099E0040, size: 4400000)

M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)

M SHM_PAGING_AREA (addr: 09E20040, size: 32768000)

M SHM_ROLL_ADM (addr: 067C0040, size: 615040)

M SHM_PAGING_ADM (addr: 0BD70040, size: 525344)

M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0BE00040

M ThCreateNoBuffer index size: 3000 elems

M ThCreateVBAdm allocated 12160 bytes (50 server) at 06860040

X EmInit: MmSetImplementation( 2 ).

X MM diagnostic options set: 0

X <ES> client 0 initializing ....

X Using implementation flat

X ES initialized.

B db_con_shm_ini: WP_ID = 0, WP_CNT = 9, CON_ID = -1

B dbtbxbuf: Buffer TABL (addr: 103C00C8, size: 30000000, end: 1205C448)

B dbtbxbuf: Buffer TABLP (addr: 0F5600C8, size: 10240000, end: 0FF240C8)

B dbexpbuf: Buffer EIBUF (addr: 120600D0, size: 4194304, end: 124600D0)

B dbexpbuf: Buffer ESM (addr: 124700D0, size: 4194304, end: 128700D0)

B dbexpbuf: Buffer CUA (addr: 128800D0, size: 3072000, end: 12B6E0D0)

B dbexpbuf: Buffer OTR (addr: 12B700D0, size: 4194304, end: 12F700D0)

M rdisp/reinitialize_code_page -> 0

M icm/accept_remote_trace_level -> 0

M rdisp/no_hooks_for_sqlbreak -> 0

M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

S

S Fri Dec 15 23:34:57 2006

S *** init spool environment

S initialize debug system

T Stack direction is downwards.

T debug control: prepare exclude for printer trace

T new memory block 05C96E20

S spool kernel/ddic check: Ok

S using table TSP02FX for frontend printing

S 1 spool work process(es) found

S frontend print via spool service enabled

S printer list size is 150

S printer type list size is 50

S queue size (profile) = 300

S hostspool list size = 3000

S option list size is 30

S found processing queue enabled

S creating spool memory service RSPO-RCLOCKS at 1C5E00A8

S doing lock recovery

S setting server cache root

S using server cache size 100 (prof=100)

S creating spool memory service RSPO-SERVERCACHE at 1C5E0330

S using messages for server info

S size of spec char cache entry: 297028 bytes (timeout 100 sec)

S size of open spool request entry: 2132 bytes

S immediate print option for implicitely closed spool requests is disabled

A

A -PXA--


A PXA INITIALIZATION

A PXA: Fragment Size too small: 36 MB, reducing # of fragments

A System page size: 4kb, total admin_size: 4968kb, dir_size: 4928kb.

A Attached to PXA (address 688A0040, size 150000K)

A abap/pxa = shared protect gen_remote

A PXA INITIALIZATION FINISHED

A -PXA--


A

A

A Fri Dec 15 23:34:58 2006

A ABAP ShmAdm attached (addr=57A34000 leng=20955136 end=58E30000)

A >> Shm MMADM area (addr=57EA9DD8 leng=126176 end=57EC8AB8)

A >> Shm MMDAT area (addr=57EC9000 leng=16150528 end=58E30000)

A RFC Destination> destination ootspdbs01_BI1_01 host ootspdbs01 system BI1 systnr 1 (ootspdbs01_BI1_01)

A RFC Options> H=ootspdbs01,S=01,d=2,

A RFC FRFC> fallback activ but this is not a central instance.

A

A RFC rfc/signon_error_log = -1

A RFC rfc/dump_connection_info = 0

A RFC rfc/dump_client_info = 0

A RFC rfc/cp_convert/ignore_error = 1

A RFC rfc/cp_convert/conversion_char = 23

A RFC rfc/wan_compress/threshold = 251

A RFC rfc/recorder_pcs not set, use defaule value: 2

A RFC rfc/delta_trc_level not set, use default value: 0

A RFC rfc/no_uuid_check not set, use default value: 0

A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0

A RFC Method> initialize RemObjDriver for ABAP Objects

M ThrCreateShObjects allocated 9514 bytes at 0FFB0040

N SsfSapSecin: putenv(SECUDIR=E:\usr\sap\BI1\DVEBMGS01\sec): ok

N

N =================================================

N === SSF INITIALIZATION:

N ===...SSF Security Toolkit name SAPSECULIB .

N ===...SSF trace level is 0 .

N ===...SSF library is E:\usr\sap\BI1\DVEBMGS01\exe\sapsecu.dll .

N ===...SSF hash algorithm is SHA1 .

N ===...SSF symmetric encryption algorithm is DES-CBC .

N ===...sucessfully completed.

N =================================================

N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.

N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.

M JrfcVmcRegisterNativesDriver o.k.

W =================================================

W === ipl_Init() called

B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:700.08]):

B max_blocking_factor = 10, max_in_blocking_factor = 127,

B min_blocking_factor = 10, min_in_blocking_factor = 127,

B prefer_union_all = 1, prefer_join = 0,

B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,

B convert AVG = 0, alias table FUPD = 0,

B escape_as_literal = 0, opt GE LE to BETWEEN = 0,

B select * =0x0f, character encoding = STD / <none>:-,

B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,

B rule_fae->0, concat_fae->0, concat_fae_or->0

W

W Fri Dec 15 23:34:59 2006

W ITS Plugin: Path dw_gui

W ITS Plugin: Description ITS Plugin - ITS rendering DLL

W ITS Plugin: sizeof(SAP_UC) 2

W ITS Plugin: Release: 700, [7000.0.52.20050900]

W ITS Plugin: Int.version, [32]

W ITS Plugin: Feature set: [10]

W ===... Calling itsp_Init in external dll ===>

W === ipl_Init() returns 0, ITSPE_OK: OK

W =================================================

E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ootspdbs01_BI1_01

E Replication is disabled

E EnqCcInitialize: local lock table initialization o.k.

E EnqId_SuppressIpc: local EnqId initialization o.k.

E EnqCcInitialize: local enqueue client init o.k.

M

M Fri Dec 15 23:35:11 2006

M SecAudit(RsauShmInit): WP attached to existing shared memory.

M SecAudit(RsauShmInit): addr of SCSA........... = 06080040

M SecAudit(RsauShmInit): addr of RSAUSHM........ = 060807A8

M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 060807E0

M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 060807EC

M

M Fri Dec 15 23:36:54 2006

M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13002]

S

S Sat Dec 16 00:14:54 2006

S found spool memory service RSPO-ACTIONS at 1C5E99F8

B

B Sat Dec 16 00:30:54 2006

B table logging switched off for all clients

Former Member
0 Kudos

Hi,

Check out these notes and if relevant implement , and let me know the results

934194,925337,920743,908602,901576,882788,870327,850830,835809,847616

Regards

Umesh K

Former Member
0 Kudos

Hi,

Can you verify if your database is in a Open state. This problem usually occurs when the DB is not in a OPEN state.

hamendra_patel
Explorer
0 Kudos

Hello All ,

I have similar problem , but i found one more issue in sterr3 . Here is extract from Dev_disp and sterr3 file :

Dev_disp :

-


trc file: "dev_disp", trc level: 1, release: "700"

-


sysno 01

sid SMD

systemid 562 (PC with Windows NT)

relno 7000

patchlevel 0

patchno 48

intno 20050900

make: multithreaded, Unicode, 64 bit, optimized

pid 2940

Mon Jul 10 14:20:12 2006

kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)

length of sys_adm_ext is 572 bytes

      • SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (01 2940) [dpxxdisp.c 1231]

shared lib "dw_xml.dll" version 48 successfully loaded

shared lib "dw_xtc.dll" version 48 successfully loaded

shared lib "dw_stl.dll" version 48 successfully loaded

shared lib "dw_gui.dll" version 48 successfully loaded

rdisp/softcancel_sequence : -> 0,5,-1

Mon Jul 10 14:20:17 2006

      • WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is not active

DpIPCInit2: start server >torssmd01_SMD_01 <

DpShMCreate: sizeof(wp_adm) 12816 (1424)

DpShMCreate: sizeof(tm_adm) 5217968 (25960)

DpShMCreate: sizeof(wp_ca_adm) 24000 (80)

DpShMCreate: sizeof(appc_ca_adm) 8000 (80)

DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080

DpShMCreate: sizeof(comm_adm) 552080 (1088)

DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

DpShMCreate: sizeof(file_adm) 0 (72)

DpShMCreate: sizeof(vmc_adm) 0 (1760)

DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000CD60050, size: 5901456)

DpShMCreate: allocated sys_adm at 000000000CD60050

DpShMCreate: allocated wp_adm at 000000000CD61EE0

DpShMCreate: allocated tm_adm_list at 000000000CD650F0

DpShMCreate: allocated tm_adm at 000000000CD65150

DpShMCreate: allocated wp_ca_adm at 000000000D25F000

DpShMCreate: allocated appc_ca_adm at 000000000D264DC0

DpShMCreate: allocated comm_adm at 000000000D266D00

DpShMCreate: system runs without file table

DpShMCreate: allocated vmc_adm_list at 000000000D2ED990

DpShMCreate: allocated gw_adm at 000000000D2EDA10

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated ca_info at 000000000D2EDA40

DpShMCreate: allocated wall_adm at 000000000D2EDA50

MBUF state OFF

EmInit: MmSetImplementation( 2 ).

MM diagnostic options set: 0

<ES> client 0 initializing ....

<ES> InitFreeList

<ES> block size is 4096 kByte.

Using implementation flat

<EsNT> Memory Reset disabled as NT default

<ES> 127 blocks reserved for free list.

ES initialized.

J2EE server info

start = TRUE

state = STARTED

pid = 3268

argv[0] = H:\usr\sap\SMD\DVEBMGS01\exe\jcontrol.EXE

argv[1] = H:\usr\sap\SMD\DVEBMGS01\exe\jcontrol.EXE

argv[2] = pf=H:\usr\sap\SMD\SYS\profile\SMD_DVEBMGS01_torssmd01

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=1166

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=SMD

argv[7] = -DSAPMYNAME=torssmd01_SMD_01

argv[8] = -DSAPPROFILE=H:\usr\sap\SMD\SYS\profile\SMD_DVEBMGS01_torssmd01

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]

***LOG Q0F=> DpLoopInit, nomstry () [dpxxdisp.c 1704]

      • ERROR => Connection to Message Server failed - check installation [dpxxdisp.c 1705]

CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

CCMS: start to initalize 3.X shared alert area (first segment).

DpJ2eeLogin: j2ee state = CONNECTED

Mon Jul 10 14:20:57 2006

      • ERROR => W0 (pid 3156) died [dpxxdisp.c 13947]

      • ERROR => W1 (pid 1376) died [dpxxdisp.c 13947]

      • ERROR => W2 (pid 3220) died [dpxxdisp.c 13947]

      • ERROR => W3 (pid 3212) died [dpxxdisp.c 13947]

my types changed after wp death/restart 0xbf --> 0xbe

      • ERROR => MsIModTypes: not_attached [msxxi.c 1834]

      • ERROR => W4 (pid 3316) died [dpxxdisp.c 13947]

my types changed after wp death/restart 0xbe --> 0xbc

      • ERROR => MsIModTypes: not_attached [msxxi.c 1834]

      • ERROR => W5 (pid 3332) died [dpxxdisp.c 13947]

my types changed after wp death/restart 0xbc --> 0xb8

      • ERROR => MsIModTypes: not_attached [msxxi.c 1834]

      • ERROR => W6 (pid 1228) died [dpxxdisp.c 13947]

my types changed after wp death/restart 0xb8 --> 0xb0

      • ERROR => MsIModTypes: not_attached [msxxi.c 1834]

      • ERROR => W7 (pid 2936) died [dpxxdisp.c 13947]

my types changed after wp death/restart 0xb0 --> 0xa0

      • ERROR => MsIModTypes: not_attached [msxxi.c 1834]

      • ERROR => W8 (pid 3540) died [dpxxdisp.c 13947]

my types changed after wp death/restart 0xa0 --> 0x80

      • ERROR => MsIModTypes: not_attached [msxxi.c 1834]

      • DP_FATAL_ERROR => DpWPCheck: no more work processes

      • DISPATCHER EMERGENCY SHUTDOWN ***

increase tracelevel of WPs

NiWait: sleep (10000ms) ...

NiISelect: timeout 10000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:07 2006

NiISelect: TIMEOUT occured (10000ms)

dump system status

Workprocess Table (long) Mon Jul 10 18:21:07 2006

========================

No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table

-


0 DIA 3156 Ended no 1 0 0

1 DIA 1376 Ended no 1 0 0

2 DIA 3220 Ended no 1 0 0

3 DIA 3212 Ended no 1 0 0

4 UPD 3316 Ended no 1 0 0

5 ENQ 3332 Ended no 1 0 0

6 BTC 1228 Ended no 1 0 0

7 SPO 2936 Ended no 1 0 0

8 UP2 3540 Ended no 1 0 0

Dispatcher Queue Statistics Mon Jul 10 18:21:07 2006

===========================

--------


+
+

+

+
--


+

Typ

now

high

max

writes

reads

--------


+
+

+

+
--


+

NOWP

0

2

2000

6

6

--------


+
+

+

+
--


+

DIA

4

4

2000

4

0

--------


+
+

+

+
--


+

UPD

0

0

2000

0

0

--------


+
+

+

+
--


+

ENQ

0

0

2000

0

0

--------


+
+

+

+
--


+

BTC

0

0

2000

0

0

--------


+
+

+

+
--


+

SPO

0

0

2000

0

0

--------


+
+

+

+
--


+

UP2

0

0

2000

0

0

--------


+
+

+

+
--


+

max_rq_id 8

wake_evt_udp_now 0

wake events total 8, udp 7 ( 87%), shm 1 ( 12%)

since last update total 8, udp 7 ( 87%), shm 1 ( 12%)

Dump of tm_adm structure: Mon Jul 10 18:21:07 2006

=========================

Term uid man user term lastop mod wp ta a/i (modes)

Workprocess Comm. Area Blocks Mon Jul 10 18:21:07 2006

=============================

Slots: 300, Used: 0, Max: 0

--------


+
+
--


+

id

owner

pid

eyecatcher

--------


+
+
--


+

NiWait: sleep (5000ms) ...

NiISelect: timeout 5000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:12 2006

NiISelect: TIMEOUT occured (5000ms)

DpHalt: shutdown server >torssmd01_SMD_01 < (normal)

DpJ2eeDisableRestart

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3268)

killing process (3268) (SOFT_KILL)

DpIJ2eeShutdown: j2ee state = SHUTDOWN

NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0

SiSelNSet: set events of sock 476 to: ---

NiBufISelRemove: remove hdl 3 from set0

SiSelNRemove: removed sock 476 (pos=2)

SiSelNRemove: removed sock 476

NiSelIRemove: removed hdl 3

DpDelSocketInfo: del info for socket 3 (type=8)

NiICloseHandle: shutdown and close hdl 3 / sock 476

NiBufIClose: clear extension for hdl 3

Switch off Shared memory profiling

ShmProtect( 57, 3 )

ShmProtect(SHM_PROFILE, SHM_PROT_RW

ShmProtect( 57, 1 )

ShmProtect(SHM_PROFILE, SHM_PROT_RD

DpWakeUpWps: wake up all wp's

Stop work processes

Stop gateway

killing process (692) (SOFT_KILL)

Stop icman

killing process (3160) (SOFT_KILL)

Terminate gui connections

wait for end of work processes

wait for end of gateway

[DpProcDied] Process lives (PID:692 HANDLE:536)

waiting for termination of gateway ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:13 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process died (PID:692 HANDLE:536)

wait for end of icman

[DpProcDied] Process lives (PID:3160 HANDLE:548)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:14 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3160 HANDLE:548)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:15 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3160 HANDLE:548)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:16 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3160 HANDLE:548)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:17 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3160 HANDLE:548)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:18 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3160 HANDLE:548)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:19 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3160 HANDLE:548)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:20 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3160 HANDLE:548)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:21 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3160 HANDLE:548)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:22 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3160 HANDLE:548)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:23 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:3160 HANDLE:548)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=569

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Jul 10 14:21:24 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process died (PID:3160 HANDLE:548)

[DpProcDied] Process died (PID:3268 HANDLE:520)

not attached to the message server

cleanup EM

EsCleanup ....

EmCleanup() -> 0

Es2Cleanup: Cleanup ES2

***LOG Q05=> DpHalt, DPStop ( 2940) [dpxxdisp.c 10022]

Good Bye .....

-


Sterr4 :

--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

cc 2a

--- Unicode interface -


End of message -


--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

9a

--- Unicode interface -


End of message -


--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

b2

--- Unicode interface -


End of message -


--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

90

--- Unicode interface -


End of message -


--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

ad

--- Unicode interface -


End of message -


--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

c2 2a

--- Unicode interface -


End of message -


--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

de 4b

--- Unicode interface -


End of message -


--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

85

--- Unicode interface -


End of message -


--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

a4

--- Unicode interface -


End of message -


--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

ba

--- Unicode interface -


End of message -


--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

ce 14

--- Unicode interface -


End of message -


--- Unicode interface [u16_get.c line 225] pid = 2068 :

Invalid UTF-8 encountered by fgetcU16 (fileno 0x3)

-


I tried from last 2 days but didn't found any resolution but few hints :

1 . May be temse is full , but can't read default.pfl to find location of temse

2. May be dafult .pfl is corrupt , Since i am unable to open in readable format.

Thanks

HP

Former Member
0 Kudos

Hi,

without the tracefile of at least dev_w0 this is just guessing ...

Please put the dev_w0 file within this log and than we might be able to see what causes the death of the workprocesses.

Kind Regards

Thomas Alt

raguraman_c
Active Contributor
0 Kudos

Hi All,

Check your DNS configuration, Your DB SID, there should not be any discrepancies. You should not change them after installing WAS.

--Ragu

Former Member
0 Kudos

Hi I also have the same problem encountered. and as i've checked, the error message in this topic is the same as the dev_disp log in our system.

We are currently having a system copy for SAP ECC 6.

as checked in the logs of the system copy, it prompts us about port 3901. have anyone has solution for this?

btw, ours is running in Ora10g 1 for db and SAP ECC 6 for the apps. Both in HP - UX server. We have already applied the latest KERNEL Patch.

thanks!

Former Member
0 Kudos

Hi all.

Has no one solved this problem? I'm having it as well and have looked here and on other forums but with no luck.

Thanks

Dave

Former Member
0 Kudos

WHats the configuration ? DO u have 1 GB Ram?

Try increasing the virtual memory also..

George

Former Member
0 Kudos

I have the same problem..

Here the dev_disp log:

-


trc file: "dev_disp", trc level: 1, release: "700"

-


sysno 01

sid CRD

systemid 560 (PC with Windows NT)

relno 7000

patchlevel 0

patchno 58

intno 20050900

make: multithreaded, Unicode, optimized

pid 5728

Fri Jun 09 10:41:24 2006

kernel runs with dp version 213000(ext=109000) (@(#) DPLIB-INT-VERSION-213000-UC)

length of sys_adm_ext is 572 bytes

      • SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (01 5728) [dpxxdisp.c 1231]

shared lib "dw_xml.dll" version 58 successfully loaded

shared lib "dw_xtc.dll" version 58 successfully loaded

shared lib "dw_stl.dll" version 58 successfully loaded

shared lib "dw_gui.dll" version 58 successfully loaded

rdisp/softcancel_sequence : -> 0,5,-1

use internal message server connection to port 3901

Fri Jun 09 10:41:29 2006

      • WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5243]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is active

DpIPCInit2: start server >milds2002_CRD_01 <

DpShMCreate: sizeof(wp_adm) 18304 (1408)

DpShMCreate: sizeof(tm_adm) 3981408 (19808)

DpShMCreate: sizeof(wp_ca_adm) 24000 (80)

DpShMCreate: sizeof(appc_ca_adm) 8000 (80)

DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064

DpShMCreate: sizeof(comm_adm) 528064 (1048)

DpFileTableSize: max/headSize/ftSize/tableSize=2600/8/208056/208064

DpShMCreate: sizeof(file_adm) 208064 (72)

DpShMCreate: sizeof(vmc_adm) 18720 (1440)

DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: SHM_DP_ADM_KEY (addr: 05E60040, size: 4867264)

DpShMCreate: allocated sys_adm at 05E60040

DpShMCreate: allocated wp_adm at 05E61E28

DpShMCreate: allocated tm_adm_list at 05E665A8

DpShMCreate: allocated tm_adm at 05E665D8

DpShMCreate: allocated wp_ca_adm at 06232638

DpShMCreate: allocated appc_ca_adm at 062383F8

DpShMCreate: allocated comm_adm at 0623A338

DpShMCreate: allocated file_adm at 062BB1F8

DpShMCreate: allocated vmc_adm_list at 062EDEB8

DpShMCreate: allocated gw_adm at 062EDEF8

DpShMCreate: allocated vmc_adm at 062EDF28

DpShMCreate: allocated ca_info at 062F2848

DpShMCreate: allocated wall_adm at 062F2850

MBUF state OFF

DpSesCreateTable: created session table at 06380040 (len=138424)

EmInit: MmSetImplementation( 2 ).

MM diagnostic options set: 0

<ES> client 0 initializing ....

<ES> InitFreeList

<ES> block size is 1024 kByte.

Using implementation flat

<EsNT> Memory Reset disabled as NT default

<ES> 1023 blocks reserved for free list.

ES initialized.

Fri Jun 09 10:41:30 2006

J2EE server info

start = TRUE

state = STARTED

pid = 4696

argv[0] = D:\usr\sap\CRD\DVEBMGS01\exe\jcontrol.exe

argv[1] = D:\usr\sap\CRD\DVEBMGS01\exe\jcontrol.exe

argv[2] = pf=D:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS01_milds2002

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=1804

argv[5] = -DSAPSYSTEM=01

argv[6] = -DSAPSYSTEMNAME=CRD

argv[7] = -DSAPMYNAME=milds2002_CRD_01

argv[8] = -DSAPPROFILE=D:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS01_milds2002

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]

***LOG Q0K=> DpMsAttach, mscon ( milds2002) [dpxxdisp.c 11485]

DpStartStopMsg: send start message (myname is >milds2002_CRD_01 <)

DpStartStopMsg: start msg sent

CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

CCMS: Initalizing shared memory of size 60000000 for monitoring segment.

CCMS: start to initalize 3.X shared alert area (first segment).

DpMsgAdmin: Set release to 7000, patchlevel 0

MBUF state PREPARED

MBUF component UP

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]

DpMsgAdmin: Set patchno for this platform to 58

Release check o.K.

DpJ2eeLogin: j2ee state = CONNECTED

Fri Jun 09 10:42:10 2006

      • ERROR => W0 (pid 5516) died [dpxxdisp.c 14113]

      • ERROR => W1 (pid 5088) died [dpxxdisp.c 14113]

      • ERROR => W2 (pid 4512) died [dpxxdisp.c 14113]

      • ERROR => W3 (pid 4740) died [dpxxdisp.c 14113]

      • ERROR => W4 (pid 4724) died [dpxxdisp.c 14113]

my types changed after wp death/restart 0xbf --> 0xbe

      • ERROR => W5 (pid 4544) died [dpxxdisp.c 14113]

      • ERROR => W6 (pid 5800) died [dpxxdisp.c 14113]

my types changed after wp death/restart 0xbe --> 0xbc

      • ERROR => W7 (pid 4784) died [dpxxdisp.c 14113]

my types changed after wp death/restart 0xbc --> 0xb8

      • ERROR => W8 (pid 1688) died [dpxxdisp.c 14113]

      • ERROR => W9 (pid 5112) died [dpxxdisp.c 14113]

my types changed after wp death/restart 0xb8 --> 0xb0

      • ERROR => W10 (pid 5880) died [dpxxdisp.c 14113]

my types changed after wp death/restart 0xb0 --> 0xa0

      • ERROR => W11 (pid 6120) died [dpxxdisp.c 14113]

      • ERROR => W12 (pid 3856) died [dpxxdisp.c 14113]

my types changed after wp death/restart 0xa0 --> 0x80

      • DP_FATAL_ERROR => DpWPCheck: no more work processes

      • DISPATCHER EMERGENCY SHUTDOWN ***

increase tracelevel of WPs

NiWait: sleep (10000ms) ...

NiISelect: timeout 10000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:20 2006

NiISelect: TIMEOUT occured (10000ms)

dump system status

Workprocess Table (long) Fri Jun 09 08:42:20 2006

========================

No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table

-


0 DIA 5516 Ended no 1 0 0

1 DIA 5088 Ended no 1 0 0

2 DIA 4512 Ended no 1 0 0

3 DIA 4740 Ended no 1 0 0

4 DIA 4724 Ended no 1 0 0

5 UPD 4544 Ended no 1 0 0

6 UPD 5800 Ended no 1 0 0

7 ENQ 4784 Ended no 1 0 0

8 BTC 1688 Ended no 1 0 0

9 BTC 5112 Ended no 1 0 0

10 SPO 5880 Ended no 1 0 0

11 UP2 6120 Ended no 1 0 0

12 UP2 3856 Ended no 1 0 0

Dispatcher Queue Statistics Fri Jun 09 08:42:20 2006

===========================

--------


+
+

+

+
--


+

Typ

now

high

max

writes

reads

--------


+
+

+

+
--


+

NOWP

0

2

2000

6

6

--------


+
+

+

+
--


+

DIA

6

6

2000

6

0

--------


+
+

+

+
--


+

UPD

0

0

2000

0

0

--------


+
+

+

+
--


+

ENQ

0

0

2000

0

0

--------


+
+

+

+
--


+

BTC

0

0

2000

0

0

--------


+
+

+

+
--


+

SPO

0

0

2000

0

0

--------


+
+

+

+
--


+

UP2

0

0

2000

0

0

--------


+
+

+

+
--


+

max_rq_id 13

wake_evt_udp_now 0

wake events total 9, udp 7 ( 77%), shm 2 ( 22%)

since last update total 9, udp 7 ( 77%), shm 2 ( 22%)

Dump of tm_adm structure: Fri Jun 09 08:42:20 2006

=========================

Term uid man user term lastop mod wp ta a/i (modes)

Workprocess Comm. Area Blocks Fri Jun 09 08:42:20 2006

=============================

Slots: 300, Used: 1, Max: 0

--------


+
+
--


+

id

owner

pid

eyecatcher

--------


+
+
--


+

0

DISPATCHER

-1

WPCAAD000

NiWait: sleep (5000ms) ...

NiISelect: timeout 5000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:25 2006

NiISelect: TIMEOUT occured (5000ms)

DpHalt: shutdown server >milds2002_CRD_01 < (normal)

DpJ2eeDisableRestart

MsIDelService: delete service J2EE for myself

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)

MsINiWrite: sent 161 bytes

send msg (len 110+51) to name MSG_SERVER, type 0, key -

MsSndName: MS_DEL_PROPERTY ok

Send 51 bytes to MSG_SERVER

MS_DEL_PROPERTY : asynchronous call

send MsDelService(J2EE) to msgserver

DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4696)

killing process (4696) (SOFT_KILL)

DpIJ2eeShutdown: j2ee state = SHUTDOWN

NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0

SiSelNSet: set events of sock 1384 to: ---

NiBufISelRemove: remove hdl 4 from set0

SiSelNRemove: removed sock 1384 (pos=2)

SiSelNRemove: removed sock 1384

NiSelIRemove: removed hdl 4

DpDelSocketInfo: del info for socket 4 (type=8)

NiICloseHandle: shutdown and close hdl 4 / sock 1384

NiBufIClose: clear extension for hdl 4

DpModState: buffer in state MBUF_PREPARED

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIModState: change state to SHUTDOWN

DpModState: change server state from STARTING to SHUTDOWN

Switch off Shared memory profiling

ShmProtect( 57, 3 )

ShmProtect(SHM_PROFILE, SHM_PROT_RW

ShmProtect( 57, 1 )

ShmProtect(SHM_PROFILE, SHM_PROT_RD

DpWakeUpWps: wake up all wp's

Stop work processes

Stop gateway

killing process (2096) (SOFT_KILL)

Stop icman

killing process (4388) (SOFT_KILL)

Terminate gui connections

wait for end of work processes

wait for end of gateway

[DpProcDied] Process lives (PID:2096 HANDLE:1480)

waiting for termination of gateway ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:26 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process died (PID:2096 HANDLE:1480)

wait for end of icman

[DpProcDied] Process lives (PID:4388 HANDLE:1484)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:27 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4388 HANDLE:1484)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:28 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4388 HANDLE:1484)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:29 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4388 HANDLE:1484)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:30 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4388 HANDLE:1484)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:31 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4388 HANDLE:1484)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:32 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4388 HANDLE:1484)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:33 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4388 HANDLE:1484)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:34 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4388 HANDLE:1484)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:35 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4388 HANDLE:1484)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:36 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4388 HANDLE:1484)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:37 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process died (PID:4388 HANDLE:1484)

[DpProcDied] Process lives (PID:4696 HANDLE:1464)

DpHalt: disconnect j2ee listener

DpHalt: wait for end of j2ee server

[DpProcDied] Process lives (PID:4696 HANDLE:1464)

waiting for termination of J2EE server ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:38 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4696 HANDLE:1464)

waiting for termination of J2EE server ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:39 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4696 HANDLE:1464)

waiting for termination of J2EE server ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:40 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4696 HANDLE:1464)

waiting for termination of J2EE server ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:41 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4696 HANDLE:1464)

waiting for termination of J2EE server ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:42 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4696 HANDLE:1464)

waiting for termination of J2EE server ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:43 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives (PID:4696 HANDLE:1464)

waiting for termination of J2EE server ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1509

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jun 09 10:42:44 2006

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process died (PID:4696 HANDLE:1464)

DpStartStopMsg: send stop message (myname is >milds2002_CRD_01 <)

NiIMyHostName: hostname = 'milds2002'

AdGetSelfIdentRecord: > <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0

DpConvertRequest: net size = 189 bytes

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)

MsINiWrite: sent 562 bytes

send msg (len 110+452) to name -, type 4, key -

DpStartStopMsg: stop msg sent

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -

DpHalt: received 4 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 recv would block (errno=EAGAIN)

NiIRead: read for hdl 3 timed out (0ms)

DpHalt: no more messages from the message server

DpHalt: send keepalive to synchronize with the message server

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)

MsINiWrite: sent 114 bytes

send msg (len 110+4) to name MSG_SERVER, type 0, key -

MsSndName: MS_NOOP ok

Send 4 bytes to MSG_SERVER

NiIRead: hdl 3 recv would block (errno=EAGAIN)

NiIPeek: peek successful for hdl 3 (r)

NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -

Received 4 bytes from MSG_SERVER

Received opcode MS_NOOP from msg_server, reply MSOP_OK

MsOpReceive: ok

MsSendKeepalive : keepalive sent to message server

NiIRead: hdl 3 recv would block (errno=EAGAIN)

Fri Jun 09 10:42:45 2006

NiIPeek: peek for hdl 3 timed out (r; 1000ms)

NiIRead: read for hdl 3 timed out (1000ms)

DpHalt: no more messages from the message server

DpHalt: sync with message server o.k.

detach from message server

***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11779]

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIDetach: send logout to msg_server

MsIDetach: call exit function

DpMsShutdownHook called

NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0

SiSelNSet: set events of sock 1408 to: ---

NiBufISelRemove: remove hdl 3 from set0

SiSelNRemove: removed sock 1408 (pos=3)

SiSelNRemove: removed sock 1408

NiSelIRemove: removed hdl 3

MBUF state OFF

AdGetSelfIdentRecord: > <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13

LOCK WP ca_blk 1

make DISP owner of wp_ca_blk 1

DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)

MBUF component DOWN

NiICloseHandle: shutdown and close hdl 3 / sock 1408

NiBufIClose: clear extension for hdl 3

MsIDetach: detach MS-system

cleanup EM

EsCleanup ....

EmCleanup() -> 0

Em2Cleanup: Cleanup EM2

Eg2Cleanup: Cleanup EG2

Es2Cleanup: Cleanup ES2

Es2ResLocSlotClear: clear slot 0

Es2ResLocSlotClear: clear slot 0

***LOG Q05=> DpHalt, DPStop ( 5728) [dpxxdisp.c 10158]

Good Bye .....

Anyone have any idea? The only thing that i did was turn off the server...

Thank you very much

Dan

Former Member
0 Kudos

hi

try using the latest kernel patch and also see whether your computer name is in ../etc/host files.

thanks

Prince

Former Member
0 Kudos

Probably your datebase is full (file space).

Run DATEBASE MENAGER, connect to NSP and check it. If Yes - click to Data Area in Information and add set properities on DATA0002. Set new Size and confirm.

Should be working.

Good Luck!

B.

Former Member
0 Kudos

Hi.

I can't find the Database Manager.

Can someone advice me?

Thanks in advance. Help is greatly appreciated!

Philipp

=========================

Ok: I found the Database Manager!

I had to install it additionally. YOu can find in

<src_dir>/MaxDB_7.6.0_RDBMS_Installations/MAXDB_WINDOWS_I386/SETUPS/DBM76.EXE

Message was edited by: Philipp Krapp

sumith_rajagopalan
Participant
0 Kudos

Hi Philipp,

Was your problem solved? I'm having the same issue, however my Db is not full! What else could be the reason for this behaviour?

Warm Regards,

Sumith Rajagopalan

Former Member
0 Kudos

Hi

Check whether your DB is running. If DB is running and you are getting same pls post the logs

Thanks

Prince

Former Member
0 Kudos

Hi,

Please check/post the work process log files dev_w*

in ..\usr\sap\<sid>\..\work folder.

A kernel upgrade to the latest patch(if possible) might

help solve the dispatcher error.

Regards

Srikishan

Former Member
0 Kudos

Hi Phillip,

Do you have solution ? I am facing same problem currently.

I am pretty new to BASIS as well.

Do you have dny update ?

Message was edited by:

Narayanan N B