on 07-28-2008 11:23 AM
Hi gurus,
My client requirement is that they want to maintain two values for upper specification and lower specification for a quantitative characteristic.
For eg. Master inspection characteristic is carbon %
& for this characteristic they want to maintain values as follows
lower specification:0.00 upper specification:0.32
lower specification:0.37 upper specification:0.60
The requirement is that both these limits should be maintained for the same MIC and system should not allow values between 0.32-0.37
Is this possible in standard scenario.If possible pls. provide me the solution.
Thanks in advance.
No, not possible in standard SAP. A test can only have one set of limts.
What you describe sounds more like specs anyway rather then test limits.
Your client isn't maintaining specs for materials in MIC's are they? This would be the least desirable method and not really the way SAP designed it to be.
Craig
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
satisfied with the answer.
Regards
Amit
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
94 | |
11 | |
11 | |
6 | |
6 | |
4 | |
3 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.