on 06-18-2008 10:49 AM
Hi Firends,
can any body send me sample scenario for single source to mutiple targets. here i should have one mesg map and one interface mapping.
Hi,
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
The above link help you
Here it is based on the one message mapping and one interface mapping.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Uday,
You can do it this ways:
Putting the condition in deciding your receiver business system in your receiver determination. For each business system which is acting as a receiver, you need to provide individual interface determination.
Also, it can be non-condition based - you don't have to specify a condition and it will branch out the message to multiple receivers you specify in receiver determination.
kanan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI,
1 to N Mapping is possible with adding the multiple receivers systems in Receiver determination.
Check the following links:
multi mapping without bpm -/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f3b31d48fb1bc8e10000000a11466f/frameset.htm
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f3b31d48fb1bc8e10000000a11466f/frameset.htm
Thanks
swarup
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
As per you requirements you can opt Enhanced Receiver Determination for having 1 single Interface mapping & message mapping
Enhanced Receiver Determination
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
Enhanced Receiver Determination
/people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
Enhanced Receiver Determination
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/enhancedReceiverDeterminationinSAP+XI&
Enhanced Receiver Determination
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
*Dynamic Receiver Determination *
/people/robin.schroeder/blog/2006/11/15/using-dynamic-receiver-determination-with-sync-interface
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Check this scenario single sender and multiple receivers using BPM.
/people/prasadbabu.nemalikanti3/blog/2006/03/10/bpmsingle-sender-and-multiple-receivers-based-on-synchronous-exchangeswitch-part-1
Regards,
Phani
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI Uday,
BPM will resolve the problem.
Thanks,
RamuV
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Uday,
You will have to either use the Configured Recievers tab of the reciever determination(in case of statically detemining the Recievers) or Enhanced Reciver Determination. The link for enhanced reciever determination is:
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/frameset.htm
You can also refer to the following blog:
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
Regards,
Sanjeev.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Daer Uday,
You can accomplish this by having multiple Business Systems or Multiple Business Services.
For ex: Take 3 Business Systems for receiving message in the scenario.
Do the normal mapping for sender structure and receiving structure.
Do Interface Mapping as well
when you come to Integration Directory--> Receiver Determination part. You can configure three Receiver Business Systems to receive the data.
Even you can set the condition for the receiving criteria. Like if the sender name is 'XYZ" send it to Business System 1
If the sender name is "ABC" send it ti Business System 2 like that.
Best Regards
Praveen
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Check the links below:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
Also Check these
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
BPM in XI https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/integrationProcess%28ccBPM%29inXI&
BPM-1 /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
BPM-2 /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
BPM-3 /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
BPM-4 /people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
Schedule BPM /people/siva.maranani/blog/2005/05/22/schedule-your-bpm
Use of Synch - Asynch bridge in ccBPM /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
Use of Synch - Asynch bridge in ccBPM https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
without BPM /people/henrique.pinto/blog/2007/08/02/syncasync-scenarios-without-bpm
without BPM1 /people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
IDOC BPM /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
This will help you more :
multimapping without BPM /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards,
Sharath
Edited by: sharath on Jun 18, 2008 3:26 PM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi,
check this.
http://help.sap.com/saphelp_nw2004s/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm
Also see this
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Thanks,
Vijaya.
User | Count |
---|---|
84 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.