on 06-06-2008 8:07 AM
Hi friends..
this is newly configured PI7.0 sp14 server... there are many post instlation steps are pending..
in this proxy configuration i am doing now.. i have seen this blog..
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
in this i have a doubts,,is this onley configuration i have to do for useing proxy..
and in this blog it is for XI rite are there any changes in the name port and Path Prefix: /sap/XI/engine/?type=entry
please clarify all the steps to complete this proxy configuration and ready to implement proxys in my system..
Thanks and Regards
Vijay
hi,
check the below link
how toactivate proxy
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
regards
chandra
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi friends,
Please look into this issue..
Regards
Vijay
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
sproxy error when testing the connection test in r/3 1 and 2nd error is comming..
Regards
vijay
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Just go to SE16 to maintain SPROXSET table.
Column NAME: IFR_ADDRESS
Column VALUE: for example, pwdf0436:1080/rep
User and password are also taken from the table SPROXSET
(Entries with the name "IFR_USER" or "IFR_PASSWORD").
and
Run this report to check/maintain the address of the IB:
TOCODE: SE38
Execute the report:SPROX_CHECK_IFR_ADDRESS
regards
chandra
hi now i got authorizaation to enter value in this table sproxset
for example:
targethost:abc
port:50000
and pathprefix: /rep
and user PIAPPLUSER
can i take this values then the values i haveto enter in that table is
name: http://abc/50000/rep
user: PIAPPLUSER
value: /abc:50000/rep
this is the way i have to enter values in sproxset..
is that different please say..
i am entering in r/3.. please confirm this i have to maintain in xi also..
regards
vijay
Hi Guest
I have similar problem for my system.
when i try to check in se16 the table entry SPROXSET->execute
it then opens a screen
data browser: table SPROXSET: slection screen
which again asks for inputs.
I gave inputs and do search it says no value find for selection screen.
My doubt is do i need to create the vale myself.
If not then how can i check the value for this table.
your guidance in this concern is highly appreciated.
Regards
Pooja
Hi
Thanks a lot for the document..
i have checked all the tests...
i got error in the following points...
so please give solutions to this errors..
1.2 Testing the HTTP services on the Integration Server
Start transaction SICF.
Choose default_host -sap bc ping (connection test)
and then choose Test service in the context menu of the entry.
This test is not properly doneu2026
1.4 Testing the connection to the Integration Builder
SPROX_CHECK_HTTP_COMMUNICATION
Check failedu2026
SPROX_CHECK_IFR_CONNECTION
No connection..
1.6 Netweaver Administrator
Netweaver Administrator
Is showing yellow.. (not fully configured)
Thanks and Regards
Vijay
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi chandra..
now i need to configure the HTTP port in Application system ( that is R/3 not the XI)..
this has to be done even in R/ 3 .. May i confirm that the RFC which are in this blog
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
if i do this configuration in R/3 side ..my proxy configuration is done..
Now i have few doubts in the RFC configuration accoring to this blog... what is the service number..
I have configured RFC destination name is SAPISU_XID.. when i test this i am getting error as..
ICM_HTTP_CONECTION_FAILED..
so please guide in completing this configuraion...
Thanks and Regards
Vijay
hi,
try this note:824554
Service number: 80
Check that the port really is the ICM HTTP Port (transaction
SMICM) and not the J2EE port
2.If the port is wrong, change the pipeline URL in the SLD in
the business system of the Integration Server
3.Restart the J2EE Engine to reset the SLD buffer of the
Adapter Engine
and also check whether HTTP service is active
go thru this blog
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
regards
chandra
hi chandra
I have all the steps but still showing the error..ICM_HTTP_CONECTION_FAILED..
in r/3 i need to complete the this RFC destinations SAPSLDAPI, LCRSAPRFC
before checking the RFC destination of SAPISU_XID..
are this 3 rfc are related to one another... after completing of this rfc my proxy will work..
thanks and regards
Vijay
hi
it is necessary to have this RFC dest SAPSLDAPI, LCRSAPRFC
1. Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
1.Execute transaction SM59 in the business system.
2.Choose Create.
3.Enter at least the following:
1.RFC Destination: LCRSAPRFC
2.Connection Type: T
3.Description: <your description>
4.Choose ENTER.
5.Choose the Technical settings tab page and do the following:
6.In the Program ID field under Registered Server Program, enter LCRSAPRFC
7.This program ID must correspond to a program ID specified in the RFC engine settings of the SAP J2EE Engine on the Integration Server host.
RFC Destination
2. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
Program ID: LCRSAPRFC
Gateway Host: <Integration Server host>
Gateway Service: <Integration Server gateway service>
Number of process: 3
4. Under Repository specify the following:
Application Server: <Integration Server host>
5. Choose Set.
3. Maintain SLD access details in Transaction SLDAPICUST
REGARDS
chandra
i have sucessfully finished the RFC destinations..
wheni check SLDCHECK in r/3 it shows this erroe and in XI server every this correct and working fine...
then i got this error
No SLD server access data maintained
=> Use transaction SLDAPICUST to maintain the SLD server access data
Summary: Connection to SLD does not work
=> Check SLD function and configurations
in SLDAPICUST i have to maintain manually in R/3 details of XI server or this values automatically assignes.
and when i testing the SAPISU_XID this rfc same error is comming...
Regards
Vijay
hi
Configuration required on the Business System:
1. Create HTTP connection in the business system.
Configuration Details:
Technical Setting:
1. Following Inputs are required for technical setting
1 Connection Type: H
2 Target Host: System name
3 Service Number: HTTP Port name
4 Path Prefix: /sap/XI/engine/?type=entry
Logon Security
On the Logon/Security tab page, enter the following logon data:
1 User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
2 Password: the password you have specified for this user
3 Client: SAP XI Integration server
4 Language: Language required
and
2. Configuration Business system as local Integration Engine.
1. Goto Transaction SXMB_ADM
2. Choose Edit --> Change Global Configuration Data.
3. Select Role of Business System: Application system
4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
5. Under Specific Configuration Data you can specify additional configuration data
1.Select the relevant category under Specific Configuration Data.
2.Choose Change Specific Configuration Data.
For ABAP Proxies, Add the following configuration:
1.Category RUNTIME
2.Parameters: IS_URL
3.Current Value: dest://SAPISU_XID
and let me know is still the error persisting
regard
chandra
hi,
Make sure the XIAPPLUSER is having all the authorizations in the XI box as mentioned in the configuration guide of XI.
Do check whether you have the INTEGRATION_DIRECTORY_HMI RFC destination is maintained in your R/3 and the connection user is maintained as XIAPPLUSER and its password.
XI Server
-
Exchange Profile path:
http://pidev.abc.com:50100/exchangeProfile
R/3 Server
-
Exchange Profile path:
http://r3dev.abc.com:50200/exchangeProfile
regards
chandra
Hi,
Please check once again user name & passowrd.
once u test connection, it will show HTTP response as "500'.
once u open sproxy, u have an option i.e
goto-> connection test.
it will show four report programs, try to execute those individually and let us know any problem u r facing.
1.sproxy_check_ifr_address
2.sproxy_check_http_communication
3.sproxy_check_ifr_response
4.sproxy_check_ifr_connection.
and please make sure role of busines system as application server in ECC and maintain corresponding integration server.
regards
mahesh.
Please say this fileds values also..
targethost and service number i mean if i am configuring in R/3 i have to give the targethost of XIserver and if i am doing in XI i have to give R/3 side and at this time what is the value of path prefix in the both the cases it would be same . or not..
and need to change any parameters in special options tab.. if so please confirm that 222.
and logon tab i have to details of XI server when i am doing in R/3 and what about when i am doing in Xi what is the user name and password of R/3 i have to use...
...
Thanks and Regards
Vijay
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Vijay,
As your system is newely configured. So, I'll suggest to go through following link:
https://websmp202.sap-ag.de/~sapidb/012006153200000920262007E/Readiness_Check_Version4.pdf
(Market place access req.)
It will help you to solve proxy issue as well.
Regards
Sachin
Hi,
All the settings given in the blog shld be done in Application System( SAP R/3)
As part of XI Post Configuration , some of the steps shld be configured before this in XI
Like
1) Creation of RFC's like SAPSLDAPI, LCRSAPRFC
2) Maintain these in Visual admin and all
3) Configure SLDAPICUST in XI
Regards
Seshagiri
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Both the end (R3 as well as XI) the configuration is required.
Path prefix:
Use the following path prefixes in the Target System Settings.
/sap/xi/engine?type=entry
for SAP systems based on SAP BASIS 6.40 (Higher than XI 3.0 message protocol). that means it is appicable for PI 7.0
/sap/xi/engine?type=receiver
for SAP systems based on SAP BASIS 6.20 (XI 2.0 message protocol).
Please reward points
Thanks
Vikranth
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
81 | |
25 | |
12 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.