on 05-21-2008 4:41 PM
Hi,
For IDOC to IDOC scenario what are the settings we have to in R3 System other than XI configuration settings.
What are setting for both sender and receiver side.
Thanks,
Kishore
Hi
You have to create the following
RFC destination : SM59
PORT : WE21
PARTNER PROFILE : WE20
LOGICAL SYS : BD54
Thanks
Saiyog
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
To send/receive Idoc from/to R3 to/from XI you have to implement following steps of ALE settings.
Steps for ALE settings:-
Steps for XI
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the R3 system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto IDX1.
Create a new port.
Give the port name.
Give the client number for the R3 system.
Select the created Rfc Destination.
Step 3)
Goto IDX2
Create a new Meta data.
Give the Idoc type.
Select the created port.
Steps for R3.
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the XI system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto WE21.
Create a port under transactional RFC.(R3->XI)
Designate the RFC destination created in prev step.
Step 3)
Goto SALE.
Basic settings->Logical Systems->Define logical system.
Create two logical systems(one for XI and the other for R3)
Basic settings->Logical Systems->Assign logical system.
Assign the R3 logical system to respective client.
Step 4)
Goto WE20.
Partner type LS.
Create two partner profile(one for XI the other for R3).
Give the outbound or inbound message type based on the direction.
Step 5)
Goto WE19
Give the basic type and execute.
fill in the required fields.
Goto IDOC->edit control records.
Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
Click outbound processing.
Step 6)
Go to SM58
if there are any messages then there is some error in execution.
Goto WE02.
Check the status of the IDOC.
Goto WE47.
TO decode the status code.
Step 7)
Not mandatory.
Goto BD64.
Click on Create model view.
Add message type.
Regards
Sami
Reward points if helpful.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI Kishore,
Actually IDOC is a structure. If your R3 is connect to PI
You have to create
1.Logical System
2.Patnerprofile.(it will ask port no)
Thanks,
RamuV
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
The R/3 settings you need to do are.
1.Create the logical system.
2.Create RFC Destination.
3. Create port and partner profile.
Thanks,
Soumya.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Kishore,
R/3 :
1. LS might already be existing if not create
2. RFC destination
3. BD64 - > add message types in BD64 and select Generate partner profiles from the menu. ( It will automatically create port and partner profiles )
now go to Partner profiles and check or change ur message types and message control ( if you are using orders )
thats it
nikhil.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
IDOC to IDOC tunnelling
/people/michal.krawczyk2/blog/2005/11/21/xi-idoc-to-idoc-tunneling--how-fast-and-easy-can-you-get
Also Refer the links given below...
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Following are the R/3 settings you need to do.
SM59 for RFC destination creation,
we21 for creating the port,
we20 to maintain the parterprofile
Thanks,
Vijaya
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Kishore,
http://help.sap.com/saphelp_nw04/helpdata/en/18/22b800773211d396b20004ac96334b/content.htm
http://www.erpgenie.com/index.php?option=com_content&task=view&id=346&Itemid=57
http://www.thespot4sap.com/Articles/SAP_ALE_Other_Concepts_Conclusion.asp
Refer this material..
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
You can directly create an iDoc using some transaction like...
Use TCODE bd10 - to Send Data
and TCODE bd11 - to Get Data
and you can check the IDoc List using TCODE we02.
As you want step by step procedure.
1. Define Logical System and Assign Logical System
TCODE sale
2. Define RFC
TCODE sm59
3. Define Port
TCODE we21
4. Define Partner Profile
TCODE we20
5. Define Distribution Model
TCODE bd64
6. Send Data
TCODE bd10
7. Get Data
TCODE bd11
8. IDoc List
TCODE we02
There are basically two types of IDOCs.
Basic IDOCs
Extended IDOCs
Idoc Components
Basic Idoc
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extension Idoc
Extending the functionality by adding more segments to existing Basic IDOCs.
Creation of IDoc
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Create IDOC Type
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
u can also check all these links related to idocs
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/extending-a-basic-idoc-type-2358
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7eee43d711d1893e0000e8323c4f/frameset.htm
Reward points if this helps
Regards
Pragathi.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Kishore,
To send Idoc to XI you have done ALE settings on both XI and R3 system.
Steps for ALE settings:-
Steps for XI
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the R3 system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto IDX1.
Create a new port.
Give the port name.
Give the client number for the R3 system.
Select the created Rfc Destination.
Step 3)
Goto IDX2
Create a new Meta data.
Give the Idoc type.
Select the created port.
Steps for R3.
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the XI system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto WE21.
Create a port under transactional RFC.(R3->XI)
Designate the RFC destination created in prev step.
Step 3)
Goto SALE.
Basic settings->Logical Systems->Define logical system.
Create two logical systems(one for XI and the other for R3)
Basic settings->Logical Systems->Assign logical system.
Assign the R3 logical system to respective client.
Step 4)
Goto WE20.
Partner type LS.
Create two partner profile(one for XI the other for R3).
Give the outbound or inbound message type based on the direction.
If you have done all these steps then check your Idoc in transaction WE05 whether it is in green state.
Also check in transaction BD87, where you will get actual error.
BestRegards,
Ramesh.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
95 | |
11 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.