on 05-15-2008 11:42 AM
Dear Expert,
I have installed ECC 6.0 IDES server For BEx web reporting, we have installed a seperate NW7.0 Java+EP system. Now, I have to configure the RFC connection between these two systems.
I need your help to configure RFC connection between IDES & EP to run WAD report,
and specially about the prerequisites before starting the configuration.
1) what are the steps I have to do
2) Since both of my systems are in same network, what is the best way to check prerequisites necessary for the config.
3) UME for our seperate Java instance. I have configured it to be the Java database and not not the ABAP system. Will this be a problem?
4) ICM parameters - which ones are necessary- HTTP,SMTP. Is HTTPS too?
Any other comments about this or advise would be appr
If give me some document with details steps it will help me a lot to configure the RFC
Thanks
DInesh
Dear Juan,
you provide me the link for configuration of RFC between portal and IDES server,
with help of that link I have configured RFC connection in portal J2EE with the help of visual administration. on portal side the status of the connection is showing runing.
see the configuration details at portal side as below:-
Entries for Step 1 - Create RFC Destination in J2EE Engine
SAP J2EE Visual Administrator
<SID> / Server<#> / Services / Jco RFC Provider / RFC Destination
Program ID: UBSIDES_IDE_00
Gateway host: ubsides
SAP Router string might be required for Gateway host
Gateway service: sapgw00 (3300; sapgw... is defined in c:\windows\system32\drivers\etc\services or /etc/services)
Number of processes (1..20): 20
Application server host: ubsides
SAP Router string might be required for Application server host
System number: 00
Client: 800
Language: EN
User: DINESH
Password: DDM1994
after above configuration I have check the connection in IDES using T-code SMGW
it show the connection details as below
0 ubsides sapgw00 ubsides sapgw00 DINESH Connected ubsides_ 83027812 Internal Communication Sat Apr 12 11:31:36 2008 0 0
But when I try to configure RFC connection on IDES server using sm59 it give me below error
ntries for Step 2 - Create RFC Destination for Portal
I Transaction Display and Maintenance of RFC Destinations (SM59)
reate
ame of RFC destination: SAPEP_EPD_01
onnection type: T (TCP/IP connection)
escription of RFC destination: SAP NetWeaver Portal on SAPEP
echnical settings
ctivation type: Registered Server Program
rogram ID: UBSIDES_IDE_00
ateway host: ubsides
ateway service: sapgw00
ogon/security
end SAP Logon Ticket active
hecks for Step 2 - Create RFC Destination for Portal
. Check existance of RFC destination
Check of RFC destination SAPEP_EPD_01 with RFC_READ_TCPIP_DESTINATION fails with sy-subrc= 2
I would like to request you to help me to resolve this issue
If you have your contact no please give me if don't mind so that i will explain you the issue in details
Thanks
Dinesh M
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Dinesh,
In EP 7.0 you have configuration templates available, you can use then to make your job easy.
http://<hostname>:<portno>/nwa
Use your administrator of EP to logon to the this link, browse through Configuration and choose the required template for your setup and configuration. Keep in mind that you can run this template only for one configuration. The various steps in RSPOR_SETUP are performed automatically by this template, you only need to make sure on your inputs are correctly entered in various steps.
Since you have already done certain configuration, I suggest you use new names during your setup this time.
Regards,
Nilesh
Hi Nilesh,
Thanks for your reply
I traied that option also but I getting error see the error as below
1 Create Destination in ABAP Import not successful
Element 'SAPConfigLib.EPD.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.EPD.Unclassified.createRfcDestination':Error during executing Java Reflection:JCO.Client not connected in repository call
Process which I done
login to Portal
login as administrator
--> click on deploy & changes
In that select Scenario: BI_Java
BI Create Destination in ABAP
Please let me know where I'm going wrong
Thanks
Dinesh
You need to execute RSPOR_SETUP in order to connect BI with EP.
Read,
http://help.sap.com/saphelp_nw04/helpdata/en/e8/e4044132bcef23e10000000a155106/content.htm
1) what are the steps I have to do
As above,
2) Since both of my systems are in same network, what is the best way to check prerequisites necessary for the config.
No extra checks necesary.
3) UME for our seperate Java instance. I have configured it to be the Java database and not not the ABAP system. Will this be a problem?
No.
4) ICM parameters - which ones are necessary- HTTP,SMTP. Is HTTPS too?
HTTPS are not necesary (it is if you want a secure connection tho)
Regards
Juan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Juan,
you provide me the link for configuration of RFC between portal and IDES server,
with help of that link I have configured RFC connection in portal J2EE with the help of visual administration. on portal side the status of the connection is showing runing.
see the configuration details at portal side as below:-
Entries for Step 1 - Create RFC Destination in J2EE Engine
SAP J2EE Visual Administrator
<SID> / Server<#> / Services / Jco RFC Provider / RFC Destination
Program ID: UBSIDES_IDE_00
Gateway host: ubsides
SAP Router string might be required for Gateway host
Gateway service: sapgw00 (3300; sapgw... is defined in c:\windows\system32\drivers\etc\services or /etc/services)
Number of processes (1..20): 20
Application server host: ubsides
SAP Router string might be required for Application server host
System number: 00
Client: 800
Language: EN
User: DINESH
Password: DDM1994
after above configuration I have check the connection in IDES using T-code SMGW
it show the connection details as below
0 ubsides sapgw00 ubsides sapgw00 DINESH Connected ubsides_ 83027812 Internal Communication Sat Apr 12 11:31:36 2008 0 0
But when I try to configure RFC connection on IDES server using sm59 it give me below error
ntries for Step 2 - Create RFC Destination for Portal
I Transaction Display and Maintenance of RFC Destinations (SM59)
reate
ame of RFC destination: SAPEP_EPD_01
onnection type: T (TCP/IP connection)
escription of RFC destination: SAP NetWeaver Portal on SAPEP
echnical settings
ctivation type: Registered Server Program
rogram ID: UBSIDES_IDE_00
ateway host: ubsides
ateway service: sapgw00
ogon/security
end SAP Logon Ticket active
hecks for Step 2 - Create RFC Destination for Portal
. Check existance of RFC destination
Check of RFC destination SAPEP_EPD_01 with RFC_READ_TCPIP_DESTINATION fails with sy-subrc= 2
I would like to request you to help me to resolve this issue
If you have your contact no please give me if don't mind so that i will explain you the issue in details
Thanks
Dinesh M
User | Count |
---|---|
89 | |
10 | |
9 | |
9 | |
9 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.