- SAP Community
- Products and Technology
- Technology
- Technology Q&A
- SCM2007 upgrade error in SHDINST_CPY phase of PREP...
- Subscribe to RSS Feed
- Mark Question as New
- Mark Question as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
SCM2007 upgrade error in SHDINST_CPY phase of PREPARE in MSCS
- Subscribe to RSS Feed
- Mark Question as New
- Mark Question as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
on 05-13-2008 1:02 PM
Dear all,
we're trying an experimental upgrade from SCM5.0 to SCM2007 on an MSCS cluster (sql server rdbms on a separate cluster).
Currently the SCM5.0 is installed on a multi-SID cluster, with ASCS only in HA, 2 standalone enqueue replicators on the 2 nodes, CI and DIA on the 2 nodes, exacttly as of the manual, and it worked great so far.
Now we're trying to upgrade this clustered SCM instance to SCM2007, and
the upgrade is stuck in SHDINST_CPY phase of PREPARE, with the error:
SEVERE ERROR: copy of O:\usr\sap\put\bin\NTINSTASCS.PFL failed
In fact, the file above (ASCS profile template) doesn't exist in the put folder.
Tried the PREPARE twice, by using a new empty put folder and fresh upgrade media, same result.
So far very little or no support from SAP.
Any hints will be sincerely appreciated.
Franco.
- SAP Managed Tags:
- Windows Server
Accepted Solutions (0)
Answers (4)
Answers (4)
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Report Inappropriate Content
Dear friends,
SAP finally solved this issue: apparently the SAPUP.exe program is no good ! They provided us a 'test' SAPUP.exe program, so we could restart the SHDINST_CPY and successfully conclude the prepare phase.
Thank you all for the useful advices.
Franco.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Report Inappropriate Content
thank you Eric for your smart advice, I needed it...
For the 2nd node, no SCM instances are active other than the ones in the current node, where the upgrade takes place... I don't think you mean shutting down the 2nd node completelly... or not ?
The licenses are ok, the SCM instance I'm trying to upgrade has been regularly licensed and actually it is in use.
Cheers.
Franco.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Report Inappropriate Content
Hmm, thanks for the suggestion but that doesn't apply to our case.
Here you see out UpgDialog file with all the events registered. Apart of the error: ERROR: RFC of "subst_get_uvers" failed. (DDIC was locked before), to me it seems pretty clean.
Target SAP system is SCD
Enter the SAP instance number [13]:
? INSTANCE NUMBER =
Waiting for input since May 13, 2008 9:55:13 AM
> INSTANCE NUMBER = 13
Type of database system is mss
>>>>>>>>>> Input Wizard <<<<<<<<<<
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 01 =
? MOUNT POINT 02 =
? MOUNT POINT 03 =
? MOUNT POINT 04 =
? MOUNT POINT 05 =
? MOUNT POINT 06 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 07 =
? MOUNT POINT 08 =
? MOUNT POINT 09 =
? MOUNT POINT 10 =
? MOUNT POINT 11 =
? MOUNT POINT 12 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 13 =
? MOUNT POINT 14 =
? MOUNT POINT 15 =
? MOUNT POINT 16 =
? MOUNT POINT 17 =
? MOUNT POINT 18 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 19 =
? MOUNT POINT 20 =
? MOUNT POINT 21 =
? MOUNT POINT 22 =
? MOUNT POINT 23 =
? MOUNT POINT 24 =
Waiting for input since May 13, 2008 9:55:32 AM
> MOUNT POINT 20 =
> MOUNT POINT 15 =
> MOUNT POINT 01 = V:\SCM2007\51033041
> MOUNT POINT 13 =
> MOUNT POINT 04 =
> MOUNT POINT 07 =
> MOUNT POINT 11 =
> MOUNT POINT 08 =
> MOUNT POINT 03 =
> MOUNT POINT 17 =
> MOUNT POINT 14 =
> MOUNT POINT 10 =
> MOUNT POINT 06 =
> MOUNT POINT 09 =
> MOUNT POINT 24 =
> MOUNT POINT 18 =
> MOUNT POINT 23 =
> MOUNT POINT 19 =
> MOUNT POINT 05 =
> MOUNT POINT 16 =
> MOUNT POINT 21 =
> MOUNT POINT 22 =
> MOUNT POINT 02 =
> MOUNT POINT 12 =
There are either some mount points which can't be accessed
or the currently mounted set of Data Carriers does not satisfy a mount
request.
Do you want to correct mount points?
? yes
? no
Waiting for input since May 13, 2008 10:06:10 AM
> yes
>>>>>>>>>> Input Wizard <<<<<<<<<<
The requested Data Carrier is not mounted on any of the mount points
you entered.
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 01 =
? MOUNT POINT 02 =
? MOUNT POINT 03 =
? MOUNT POINT 04 =
? MOUNT POINT 05 =
? MOUNT POINT 06 =
The requested Data Carrier is not mounted on any of the mount points
you entered.
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 07 =
? MOUNT POINT 08 =
? MOUNT POINT 09 =
? MOUNT POINT 10 =
? MOUNT POINT 11 =
? MOUNT POINT 12 =
The requested Data Carrier is not mounted on any of the mount points
you entered.
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 13 =
? MOUNT POINT 14 =
? MOUNT POINT 15 =
? MOUNT POINT 16 =
? MOUNT POINT 17 =
? MOUNT POINT 18 =
The requested Data Carrier is not mounted on any of the mount points
you entered.
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 19 =
? MOUNT POINT 20 =
? MOUNT POINT 21 =
? MOUNT POINT 22 =
? MOUNT POINT 23 =
? MOUNT POINT 24 =
Waiting for input since May 13, 2008 10:06:13 AM
> MOUNT POINT 12 =
> MOUNT POINT 09 =
> MOUNT POINT 21 =
> MOUNT POINT 17 =
> MOUNT POINT 08 =
> MOUNT POINT 18 =
> MOUNT POINT 16 =
> MOUNT POINT 14 =
> MOUNT POINT 22 =
> MOUNT POINT 13 =
> MOUNT POINT 01 = V:\SCM2007\51033041
> MOUNT POINT 02 = V:\SCM2007\D51032928
> MOUNT POINT 05 =
> MOUNT POINT 15 =
> MOUNT POINT 23 =
> MOUNT POINT 03 = V:\SCM2007\D51032924
> MOUNT POINT 04 = V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86
> MOUNT POINT 24 =
> MOUNT POINT 07 =
> MOUNT POINT 10 =
> MOUNT POINT 19 =
> MOUNT POINT 20 =
> MOUNT POINT 11 =
> MOUNT POINT 06 =
There are either some mount points which can't be accessed
or the currently mounted set of Data Carriers does not satisfy a mount
request.
Do you want to correct mount points?
? yes
? no
Waiting for input since May 13, 2008 10:09:17 AM
> yes
>>>>>>>>>> Input Wizard <<<<<<<<<<
The requested Data Carrier is not mounted on any of the mount points
you entered.
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 01 =
? MOUNT POINT 02 =
? MOUNT POINT 03 =
? MOUNT POINT 04 =
? MOUNT POINT 05 =
? MOUNT POINT 06 =
The requested Data Carrier is not mounted on any of the mount points
you entered.
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 07 =
? MOUNT POINT 08 =
? MOUNT POINT 09 =
? MOUNT POINT 10 =
? MOUNT POINT 11 =
? MOUNT POINT 12 =
The requested Data Carrier is not mounted on any of the mount points
you entered.
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 13 =
? MOUNT POINT 14 =
? MOUNT POINT 15 =
? MOUNT POINT 16 =
? MOUNT POINT 17 =
? MOUNT POINT 18 =
The requested Data Carrier is not mounted on any of the mount points
you entered.
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 19 =
? MOUNT POINT 20 =
? MOUNT POINT 21 =
? MOUNT POINT 22 =
? MOUNT POINT 23 =
? MOUNT POINT 24 =
Waiting for input since May 13, 2008 10:09:21 AM
> MOUNT POINT 21 =
> MOUNT POINT 02 = V:\SCM2007\D51032924
> MOUNT POINT 24 =
> MOUNT POINT 08 =
> MOUNT POINT 17 =
> MOUNT POINT 07 =
> MOUNT POINT 15 =
> MOUNT POINT 12 =
> MOUNT POINT 19 =
> MOUNT POINT 05 =
> MOUNT POINT 13 =
> MOUNT POINT 23 =
> MOUNT POINT 01 = V:\SCM2007\D51032928
> MOUNT POINT 14 =
> MOUNT POINT 06 =
> MOUNT POINT 03 = V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86
> MOUNT POINT 11 =
> MOUNT POINT 09 =
> MOUNT POINT 04 = V:\SCM2007\51033041\SAP_SCM_2007_Upgrade_Master
> MOUNT POINT 22 =
> MOUNT POINT 20 =
> MOUNT POINT 10 =
> MOUNT POINT 18 =
> MOUNT POINT 16 =
Reading data from "Upgrade Master CD/DVD"...
Extracting archive "V:\SCM2007\51033041\SAP_SCM_2007_Upgrade_Master\UMU_WINDOWS_X86_64\DBINDEP\CTRL7000.SAR" to "O:\usr\sap\put" ...
Archive V:\SCM2007\51033041\SAP_SCM_2007_Upgrade_Master\UMU_WINDOWS_X86_64\DBINDEP\CTRL7000.SAR successfully unpacked to O:\usr\sap\put.
Extracting archive "V:\SCM2007\51033041\SAP_SCM_2007_Upgrade_Master\UMU_WINDOWS_X86_64\DBINDEP\CTRL700X.SAR" to "O:\usr\sap\put" ...
Archive V:\SCM2007\51033041\SAP_SCM_2007_Upgrade_Master\UMU_WINDOWS_X86_64\DBINDEP\CTRL700X.SAR successfully unpacked to O:\usr\sap\put.
Extracting archive "V:\SCM2007\51033041\SAP_SCM_2007_Upgrade_Master\UMU_WINDOWS_X86_64\MSS\UPTOOLS.SAR" to "O:\usr\sap\put" ...
Archive V:\SCM2007\51033041\SAP_SCM_2007_Upgrade_Master\UMU_WINDOWS_X86_64\MSS\UPTOOLS.SAR successfully unpacked to O:\usr\sap\put.
Welcome to the SAP upgrade control program.
Important information for this upgrade is included
in the upgrade Note and further Notes mentioned therein.
Refer to the upgrade manual for the number of this note.
It is advisable to obtain this Note before starting any process
since it also contains important information about preparing
the upgrade.
It is essential that you get a current version of this Note
before starting the upgrade with SAPup. It contains a keyword
which is necessary to start the upgrade procedure.
Please look into the SAP Service Marketplace or, if not available,
use the form in your packet to request the upgrade Note.
? continue
? cancel
Waiting for input since May 13, 2008 10:09:53 AM
> continue
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/2 upgrade to release
703 of BI_CONT
400 of EA-IPPE
2006_700 of LCAPPS
2006_1_700 of PI_BASIS
200 of QIE
700 of SAP_ABA
700 of SAP_AP
700 of SAP_BASIS
700 of SAP_BW
510 of SCEMSRV
510 of SCM
510 of SCMBPLUS
510 of SCMEWM
510 of SCMSNC
510 of SCM_BASIS
2005_1_700 of ST-PI
Target SAP system is SCD, MSSQL database
SAPup started in PREPARE mode.
? continue
? cancel
Waiting for input since May 13, 2008 10:09:59 AM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since May 13, 2008 10:10:02 AM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input initial yes
? Initialization initial yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since May 13, 2008 10:10:05 AM
> Parameter input initial yes > Initialization initial yes > Import initial yes > Extension initial yes > Integration initial yes > Installation initial yes > General checks initial yes > Activation checks initial yes > Necessary checks for conversions initial yes
You selected the following PREPARE modules:
Parameter input
Initialization
Import
Extension
Integration
Installation
General checks
Activation checks
Necessary checks for conversions
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
O:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in O:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
Waiting for input since May 13, 2008 10:10:14 AM
> execute
Execution of PREPARE module Parameter input begins at 20080513101018
>> 10:10:18 PREPARE: START OF PHASE BEGIN_PRE
Generating html phase list files 'phase_toc.html' and 'phaselist.html'
>> 10:10:18 PREPARE: END OF PHASE BEGIN_PRE
>> 10:10:18 PREPARE: START OF PHASE KEY_CHK
Upgrade Correction Package
The upgrade correction package FIX_SCM51.UPG for this upgrade
could not be found in directory O:\usr\sap\put
Please check note 813658 on SAPNet for more details.
? retry
? exit
Waiting for input since May 13, 2008 10:10:18 AM
> retry
Correction package 'O:\usr\sap\put\FIX_SCM51.UPG' found, extracting to 'O:\usr\sap\put'
Archive successfully unpacked.
Enter the SAPup keyword of note 1010762
? SAPup keyword =
Waiting for input since May 13, 2008 10:10:55 AM
> SAPup keyword = 17824163
>> 10:11:25 PREPARE: END OF PHASE KEY_CHK
>> 10:11:25 PREPARE: START OF PHASE EXTRACTKRN_PRE
Extracting archive "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\SAPMMC.SAR" to "O:\usr\sap\put\exe" ...
Archive V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to O:\usr\sap\put\exe.
Copying file "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\UNINSTSAP.EXE" to "O:\usr\sap\put\exe" ...
Done.
Extracting archive "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\SAPEXE.SAR" to "O:\usr\sap\put\exe" ...
Archive V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to O:\usr\sap\put\exe.
Extracting archive "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\MSS\SAPEXEDB.SAR" to "O:\usr\sap\put\exe" ...
Archive V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to O:\usr\sap\put\exe.
Copying file "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\IGSEXE.SAR" to "O:\usr\sap\put\exe" ...
Done.
Copying file "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\IGSHELPER.SAR" to "O:\usr\sap\put\exe" ...
Done.
Extracting archive "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\SAPMMC.SAR" to "O:\usr\sap\put\exenew" ...
Archive V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to O:\usr\sap\put\exenew.
Copying file "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\UNINSTSAP.EXE" to "O:\usr\sap\put\exenew" ...
Done.
Extracting archive "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\SAPEXE.SAR" to "O:\usr\sap\put\exenew" ...
Archive V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to O:\usr\sap\put\exenew.
Extracting archive "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\MSS\SAPEXEDB.SAR" to "O:\usr\sap\put\exenew" ...
Archive V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to O:\usr\sap\put\exenew.
Copying file "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\IGSEXE.SAR" to "O:\usr\sap\put\exenew" ...
Done.
Copying file "V:\SCM2007\51033508_16\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KU_WINDOWS_X86_64_AUPG\DBINDEP\IGSHELPER.SAR" to "O:\usr\sap\put\exenew" ...
Done.
>> 10:11:47 PREPARE: END OF PHASE EXTRACTKRN_PRE
>> 10:11:47 PREPARE: START OF PHASE INITPUT_PRE
Supply the following information:
Confirm the name of your SAP system:
? SAP SYSTEM ID =
The hostname of your central SAP server:
? SAP SYSTEM HOST =
Enter the SAP instance number:
? INSTANCE NUMBER =
Waiting for input since May 13, 2008 10:11:47 AM
> INSTANCE NUMBER = 13
> SAP SYSTEM HOST = DEVCI1
> SAP SYSTEM ID = SCD
The system identifier of your database:
? DATABASE ID =
The hostname of your database server:
? DATABASE HOST =
Waiting for input since May 13, 2008 10:12:04 AM
> DATABASE HOST = OLTPDTSQL
> DATABASE ID = SCD
Executing script MSSCONCHECK ...
Supply the following information:
The password for SAP user DDIC in client 000
(may be 19920706):
? DDIC PASSWORD =
Verify password for SAP user DDIC:
? DDIC PASSWORD =
Waiting for input since May 13, 2008 10:12:10 AM
> DDIC PASSWORD = <hidden input>
> DDIC PASSWORD = <hidden input>
The hostname of your batch server:
? BATCH HOST =
Waiting for input since May 13, 2008 10:12:17 AM
> BATCH HOST = DEVCI1
Supply the following information:
The maximum number of parallel processes during uptime:
? MAXIMUM UPTIME PROCESSES =
The number of parallel import processes:
? R3TRANS PROCESSES =
The maximum profile value of "bufreftime":
? MAXIMUM SYNC TIME =
Waiting for input since May 13, 2008 10:12:21 AM
> MAXIMUM UPTIME PROCESSES = 1
> MAXIMUM SYNC TIME = 120
> R3TRANS PROCESSES = 3
The password for Operating System account ATRSAP\SAPServiceSCD:
? PASSWORD =
Verification of the password for Operating System account ATRSAP\SAPServiceSCD:
? PASSWORD =
Waiting for input since May 13, 2008 10:12:24 AM
> PASSWORD = <hidden input>
> PASSWORD = <hidden input>
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getdbinfo SCD
Executing script MSSUPGSPS ...
Executing script MSSINCHK ...
>> 10:12:34 PREPARE: END OF PHASE INITPUT_PRE
>> 10:12:34 PREPARE: START OF PHASE DBCHK_PRE
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getdbinfo SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getdbinfo SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getdbinfo SCD
Is there more than one system running in this database?
(MCOD: Multiple components in one database)
? no
? yes
Waiting for input since May 13, 2008 10:12:35 AM
> no
>> 10:13:07 PREPARE: END OF PHASE DBCHK_PRE
>> 10:13:07 PREPARE: START OF PHASE CONFCHK_IMP
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getdbinfo SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getdbinfo SCD
Your database and your central SAP instance
are running on different hosts. Please select
the operating system which is running on the
database host (see next page).
? continue
? cancel
Waiting for input since May 13, 2008 10:13:09 AM
> continue
The following operating systems are supported
? Windows NT INTEL
? Windows NT IA64
? Windows NT X86_64
? AIX
? HP-UX
? HP-UX IA64
? SunOS
? Linux
? OS/400
? z/OS
Waiting for input since May 13, 2008 10:13:17 AM
> Windows NT X86_64
>> 10:13:21 PREPARE: END OF PHASE CONFCHK_IMP
>> 10:13:21 PREPARE: START OF PHASE SOLMAN_CHK
The SAP Solution Manager Key is required for the upgrade.
Further informations can be found in the upgrade guide,
the SAP Service Marketplace and SAP note 805390!
? continue
? cancel
Waiting for input since May 13, 2008 10:13:22 AM
> continue
? SAP Solution Manager Key =
Waiting for input since May 13, 2008 10:13:30 AM
> SAP Solution Manager Key = 72AEDE0F91
>> 10:13:33 PREPARE: END OF PHASE SOLMAN_CHK
>> 10:13:33 PREPARE: START OF PHASE CHKSYSTYPE
>> 10:13:35 PREPARE: END OF PHASE CHKSYSTYPE
>> 10:13:35 PREPARE: START OF PHASE HIAV_CHK
>> 10:13:35 PREPARE: END OF PHASE HIAV_CHK
>> 10:13:35 PREPARE: START OF PHASE J2EE_CHK1
>> 10:13:35 PREPARE: END OF PHASE J2EE_CHK1
>> 10:13:35 PREPARE: START OF PHASE REQ_J2EEUPG
>> 10:13:35 PREPARE: END OF PHASE REQ_J2EEUPG
>> 10:13:35 PREPARE: START OF PHASE SETSYNC_PREP_STARTED
>> 10:13:35 PREPARE: END OF PHASE SETSYNC_PREP_STARTED
>> 10:13:35 PREPARE: START OF PHASE REQ_READNOTE
>> 10:13:35 PREPARE: END OF PHASE REQ_READNOTE
>> 10:13:35 PREPARE: START OF PHASE INIT_CBU
>> 10:13:35 PREPARE: END OF PHASE INIT_CBU
>> 10:13:35 PREPARE: START OF PHASE CHECKGROUP_END0
Execution of PREPARE module Parameter input ends at 20080513101335
Execution of PREPARE module Initialization begins at 20080513101335
>> 10:13:35 PREPARE: START OF PHASE INITCURENV
>> 10:13:35 PREPARE: END OF PHASE INITCURENV
>> 10:13:35 PREPARE: START OF PHASE DBCHK_INI
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getdbinfo SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getdbinfo SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getdbinfo SCD
>> 10:13:35 PREPARE: END OF PHASE DBCHK_INI
>> 10:13:35 PREPARE: START OF PHASE RFCCHK_INI
ERROR: RFC of "subst_get_uvers" failed.
key : RFC_ERROR_SYSTEM_FAILURE
message :
Password logon no longer possible - too many failed attempts
? continue
? cancel
Waiting for input since May 13, 2008 10:13:36 AM
> continue
SEVERE ERROR: couldn't read UVERS entry via RFC
? continue
? cancel
Waiting for input since May 13, 2008 10:14:33 AM
> continue
SEVERE ERROR(S) OCCURRED IN RFCCHK_INI !!!
? exit
? retry
Waiting for input since May 13, 2008 10:14:38 AM
> retry
>> 10:14:41 PREPARE: START OF PHASE RFCCHK_INI
>> 10:14:41 PREPARE: END OF PHASE RFCCHK_INI
>> 10:14:41 PREPARE: START OF PHASE VERSCHK_INI
>> 10:14:41 PREPARE: END OF PHASE VERSCHK_INI
>> 10:14:41 PREPARE: START OF PHASE VALCHK_INI
>> 10:14:42 PREPARE: END OF PHASE VALCHK_INI
>> 10:14:42 PREPARE: START OF PHASE TOOLVERSION_INI
>> 10:14:43 PREPARE: END OF PHASE TOOLVERSION_INI
>> 10:14:43 PREPARE: START OF PHASE UNICODE_CHK_PRE
>> 10:14:43 PREPARE: END OF PHASE UNICODE_CHK_PRE
>> 10:14:43 PREPARE: START OF PHASE TOOLVERSION_UPG1
>> 10:14:45 PREPARE: END OF PHASE TOOLVERSION_UPG1
>> 10:14:45 PREPARE: START OF PHASE DBCONNCHK_INI
Checking DB connect with 'O:\usr\sap\put\exe\R3trans.exe'.
>> 10:14:45 PREPARE: END OF PHASE DBCONNCHK_INI
>> 10:14:45 PREPARE: START OF PHASE SETSYNC_INFO_FINISHED
>> 10:14:45 PREPARE: END OF PHASE SETSYNC_INFO_FINISHED
>> 10:14:45 PREPARE: START OF PHASE UCMIG_DECISION
>> 10:14:45 PREPARE: END OF PHASE UCMIG_DECISION
>> 10:14:45 PREPARE: START OF PHASE CLNT_CHK_INI
>> 10:14:50 PREPARE: END OF PHASE CLNT_CHK_INI
>> 10:14:50 PREPARE: START OF PHASE PATCH_CHK1
>> 10:14:56 PREPARE: END OF PHASE PATCH_CHK1
>> 10:14:56 PREPARE: START OF PHASE INTCHK_INI
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getddxttent SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getddxtfent SCD
>> 10:14:56 PREPARE: END OF PHASE INTCHK_INI
>> 10:14:56 PREPARE: START OF PHASE ADJ_CNTRANS
Calling R3trans to import 'RSUPDTEC.60X'.
Waiting 130 seconds for buffer synchronization ...
working ...
>> 10:17:18 PREPARE: END OF PHASE ADJ_CNTRANS
>> 10:17:18 PREPARE: START OF PHASE INIT_CNTRANS
>> 10:17:18 PREPARE: END OF PHASE INIT_CNTRANS
>> 10:17:18 PREPARE: START OF PHASE CNTRANS_PRE
>> 10:17:18 PREPARE: END OF PHASE CNTRANS_PRE
>> 10:17:18 PREPARE: START OF PHASE DMPSPC_INI
>> 10:17:18 PREPARE: END OF PHASE DMPSPC_INI
>> 10:17:18 PREPARE: START OF PHASE JOB_RSDB4090
>> 10:17:18 PREPARE: END OF PHASE JOB_RSDB4090
>> 10:17:18 PREPARE: START OF PHASE CHK_DB6_REG_PRE
>> 10:17:18 PREPARE: END OF PHASE CHK_DB6_REG_PRE
>> 10:17:18 PREPARE: START OF PHASE CHK_DB6_PAR_INI
>> 10:17:18 PREPARE: END OF PHASE CHK_DB6_PAR_INI
>> 10:17:18 PREPARE: START OF PHASE SPACECHK_INI
Executing script MSSSPACE ...
>> 10:17:19 PREPARE: END OF PHASE SPACECHK_INI
>> 10:17:19 PREPARE: START OF PHASE KRNCHK_DEST
>> 10:17:19 PREPARE: END OF PHASE KRNCHK_DEST
>> 10:17:19 PREPARE: START OF PHASE DBPREP_CHK
>> 10:17:19 PREPARE: END OF PHASE DBPREP_CHK
>> 10:17:19 PREPARE: START OF PHASE EXECCV
>> 10:17:24 PREPARE: END OF PHASE EXECCV
>> 10:17:24 PREPARE: START OF PHASE EXECAV
>> 10:17:29 PREPARE: END OF PHASE EXECAV
>> 10:17:29 PREPARE: START OF PHASE COMPINFO_INI
>> 10:17:29 PREPARE: END OF PHASE COMPINFO_INI
>> 10:17:29 PREPARE: START OF PHASE ADDON_CHK
>> 10:17:29 PREPARE: END OF PHASE ADDON_CHK
>> 10:17:29 PREPARE: START OF PHASE ADDON_INFO
>> 10:17:29 PREPARE: END OF PHASE ADDON_INFO
>> 10:17:29 PREPARE: START OF PHASE ADDON_SPEC1
>> 10:17:35 PREPARE: END OF PHASE ADDON_SPEC1
>> 10:17:35 PREPARE: START OF PHASE ADDON_TREAS
>> 10:17:35 PREPARE: END OF PHASE ADDON_TREAS
>> 10:17:35 PREPARE: START OF PHASE ADDON_WFM
>> 10:17:35 PREPARE: END OF PHASE ADDON_WFM
>> 10:17:35 PREPARE: START OF PHASE ADDON_DMC
>> 10:17:35 PREPARE: END OF PHASE ADDON_DMC
>> 10:17:35 PREPARE: START OF PHASE ACE_CHK
>> 10:17:35 PREPARE: END OF PHASE ACE_CHK
>> 10:17:35 PREPARE: START OF PHASE CRM_BILL
>> 10:17:35 PREPARE: END OF PHASE CRM_BILL
>> 10:17:35 PREPARE: START OF PHASE PR_DBPAR
>> 10:17:35 PREPARE: END OF PHASE PR_DBPAR
>> 10:17:35 PREPARE: START OF PHASE CHECKGROUP_END1
Execution of PREPARE module Initialization ends at 20080513101735
Execution of PREPARE module Import begins at 20080513101735
>> 10:17:35 PREPARE: START OF PHASE REQIMPORT
The PREPARE module Import will be started now.
During this module programs, structures, and table entries
required by PREPARE are imported (the socalled "tool import").
Note: This can cause a loss of performance in R/3
In rare cases, a concurrent transport via the transport directory
may disturb the tool import. Please avoid any concurrent import
during this PREPARE module.
? continue
? cancel
Waiting for input since May 13, 2008 10:17:35 AM
> continue
>> 10:17:40 PREPARE: END OF PHASE REQIMPORT
>> 10:17:40 PREPARE: START OF PHASE READDATA
Trying to find archive files ...
Extracting archive "V:\SCM2007\D51032928\UPG1\DBINDEP\MISC7000.SAR" to "O:\usr\sap\put" ...
Archive V:\SCM2007\D51032928\UPG1\DBINDEP\MISC7000.SAR successfully unpacked to O:\usr\sap\put.
Extracting archive "V:\SCM2007\D51032928\UPG1\DBINDEP\MISC700X.SAR" to "O:\usr\sap\put" ...
Archive V:\SCM2007\D51032928\UPG1\DBINDEP\MISC700X.SAR successfully unpacked to O:\usr\sap\put.
Extracting archive "V:\SCM2007\D51032928\UPG1\DBINDEP\MISC_SP.SAR" to "O:\usr\sap\put" ...
Archive V:\SCM2007\D51032928\UPG1\DBINDEP\MISC_SP.SAR successfully unpacked to O:\usr\sap\put.
Trying to find archive files ...
Extracting archive "V:\SCM2007\D51032928\UPG2\DBINDEP\MISC700W.SAR" to "O:\usr\sap\put" ...
Archive V:\SCM2007\D51032928\UPG2\DBINDEP\MISC700W.SAR successfully unpacked to O:\usr\sap\put.
Trying to find archive files ...
>> 10:17:50 PREPARE: END OF PHASE READDATA
>> 10:17:50 PREPARE: START OF PHASE READDATA_EXT
Trying to find archive files ...
Extracting archive "V:\SCM2007\D51032928\UPG2\DBINDEP\M_I_0002.SAR" to "O:\usr\sap\put" ...
Archive V:\SCM2007\D51032928\UPG2\DBINDEP\M_I_0002.SAR successfully unpacked to O:\usr\sap\put.
Extracting archive "V:\SCM2007\D51032928\UPG2\DBINDEP\M_Q_0001.SAR" to "O:\usr\sap\put" ...
Archive V:\SCM2007\D51032928\UPG2\DBINDEP\M_Q_0001.SAR successfully unpacked to O:\usr\sap\put.
>> 10:17:50 PREPARE: END OF PHASE READDATA_EXT
>> 10:17:50 PREPARE: START OF PHASE TOOLFIX_CHK
Correction package 'O:\usr\sap\put\FIX_SCM51.UPG' found, extracting to 'O:\usr\sap\put'
Archive successfully unpacked.
>> 10:17:51 PREPARE: END OF PHASE TOOLFIX_CHK
>> 10:17:51 PREPARE: START OF PHASE CPYFIL0_CBU
>> 10:17:51 PREPARE: END OF PHASE CPYFIL0_CBU
>> 10:17:51 PREPARE: START OF PHASE EXEC_CPYFIL1_CBU
>> 10:17:51 PREPARE: END OF PHASE EXEC_CPYFIL1_CBU
>> 10:17:51 PREPARE: START OF PHASE FRP_CHK
>> 10:17:51 PREPARE: END OF PHASE FRP_CHK
>> 10:17:51 PREPARE: START OF PHASE UNICODELIB_CHK1
>> 10:17:51 PREPARE: END OF PHASE UNICODELIB_CHK1
>> 10:17:51 PREPARE: START OF PHASE CNV_CHK_IMP
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getconvent SCD
>> 10:17:51 PREPARE: END OF PHASE CNV_CHK_IMP
>> 10:17:51 PREPARE: START OF PHASE ICNVCHK_IMP
>> 10:17:51 PREPARE: END OF PHASE ICNVCHK_IMP
>> 10:17:51 PREPARE: START OF PHASE SCRIPT_CHK_TOOL3
>> 10:17:51 PREPARE: END OF PHASE SCRIPT_CHK_TOOL3
>> 10:17:51 PREPARE: START OF PHASE SCRIPT_CHK_TOOL4
>> 10:17:52 PREPARE: END OF PHASE SCRIPT_CHK_TOOL4
>> 10:17:52 PREPARE: START OF PHASE SCRIPT2_TST_RESTART
>> 10:17:52 PREPARE: END OF PHASE SCRIPT2_TST_RESTART
>> 10:17:52 PREPARE: START OF PHASE TRBATCHK_IMP
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP gettrbatent SCD
>> 10:17:53 PREPARE: END OF PHASE TRBATCHK_IMP
>> 10:17:53 PREPARE: START OF PHASE CLNT_CHK_IMP
>> 10:17:58 PREPARE: END OF PHASE CLNT_CHK_IMP
>> 10:17:58 PREPARE: START OF PHASE INTCHK_IMP
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getddxttent SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getddxtfent SCD
>> 10:17:58 PREPARE: END OF PHASE INTCHK_IMP
>> 10:17:58 PREPARE: START OF PHASE SPACECHK_IMP
Executing script MSSSPACE ...
>> 10:17:59 PREPARE: END OF PHASE SPACECHK_IMP
>> 10:17:59 PREPARE: START OF PHASE PATCH_CHK2
>> 10:18:04 PREPARE: END OF PHASE PATCH_CHK2
>> 10:18:04 PREPARE: START OF PHASE NTHISTCRE
>> 10:18:04 PREPARE: END OF PHASE NTHISTCRE
>> 10:18:04 PREPARE: START OF PHASE ALTER_TO
>> 10:18:12 PREPARE: END OF PHASE ALTER_TO
>> 10:18:12 PREPARE: START OF PHASE TOOLIMPD1
>> 10:18:12 PREPARE: END OF PHASE TOOLIMPD1
>> 10:18:12 PREPARE: START OF PHASE TOOLIMPD2
>> 10:18:12 PREPARE: END OF PHASE TOOLIMPD2
>> 10:18:12 PREPARE: START OF PHASE TOOLIMPD3
>> 10:18:12 PREPARE: END OF PHASE TOOLIMPD3
>> 10:18:12 PREPARE: START OF PHASE TOOLIMPD4
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP checkimpdp SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\TOOLIMPD.TPP put SCD
tp terminated successfully.
analyzing result of tp call ...
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP getconvent SCD
>> 10:20:29 PREPARE: END OF PHASE TOOLIMPD4
>> 10:20:29 PREPARE: START OF PHASE MVNTAB_TOOL
Moving nametabs ...
>> 10:25:09 PREPARE: END OF PHASE MVNTAB_TOOL
>> 10:25:09 PREPARE: START OF PHASE TOOLIMPI
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP checkimpdp SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\TOOLIMPI.TPP put SCD
tp terminated successfully.
analyzing result of tp call ...
>> 10:29:46 PREPARE: END OF PHASE TOOLIMPI
Waiting 130 seconds for buffer synchronisation
>> 10:31:56 PREPARE: START OF PHASE TOOLIMPM
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP checkimpdp SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\TOOLIMPM.TPP put SCD
tp terminated successfully.
analyzing result of tp call ...
>> 10:32:30 PREPARE: END OF PHASE TOOLIMPM
>> 10:32:30 PREPARE: START OF PHASE TOOLIMP4_UCMIG
>> 10:32:30 PREPARE: END OF PHASE TOOLIMP4_UCMIG
>> 10:32:30 PREPARE: START OF PHASE TOOLIMP4_FIX
>> 10:32:30 PREPARE: END OF PHASE TOOLIMP4_FIX
>> 10:32:30 PREPARE: START OF PHASE TOOLIMP6_FIX
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP checkimpdp SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\TOOLFIX.TPP put SCD
tp terminated successfully.
analyzing result of tp call ...
>> 10:32:36 PREPARE: END OF PHASE TOOLIMP6_FIX
>> 10:32:36 PREPARE: START OF PHASE NPREPCRE0
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\DEFAULT.TPP checkimpdp SCD
running S:\usr\sap\SCD\DVEBMGS13\exe\tp.exe pf=O:\usr\sap\put\bin\PREPIMP.TPP put SCD
tp terminated successfully.
analyzing result of tp call ...
>> 10:35:12 PREPARE: END OF PHASE NPREPCRE0
>> 10:35:12 PREPARE: START OF PHASE JOB_RSUVSAVE
Starting of SAVE UVERS in batch (job RSUVSAVE)
working ...
>> 10:35:18 PREPARE: END OF PHASE JOB_RSUVSAVE
>> 10:35:18 PREPARE: START OF PHASE UVERS_PREIMP
>> 10:35:18 PREPARE: END OF PHASE UVERS_PREIMP
>> 10:35:18 PREPARE: START OF PHASE UVERS_INIT
>> 10:35:19 PREPARE: END OF PHASE UVERS_INIT
>> 10:35:19 PREPARE: START OF PHASE SQLDB_UVERS_INIT
>> 10:35:19 PREPARE: END OF PHASE SQLDB_UVERS_INIT
>> 10:35:19 PREPARE: START OF PHASE UVERS_CHK_IMP
>> 10:35:20 PREPARE: END OF PHASE UVERS_CHK_IMP
>> 10:35:20 PREPARE: START OF PHASE BATCHCHK_IMP
Starting batch check
>> 10:35:25 PREPARE: END OF PHASE BATCHCHK_IMP
>> 10:35:25 PREPARE: START OF PHASE SQLDB_UCMIG
>> 10:35:25 PREPARE: END OF PHASE SQLDB_UCMIG
>> 10:35:25 PREPARE: START OF PHASE UCMIG_STATUS_SET0
>> 10:35:25 PREPARE: END OF PHASE UCMIG_STATUS_SET0
>> 10:35:25 PREPARE: START OF PHASE JOB_RSCVINIT
Starting of INITIALIZE CVERS in batch (job RSCVINIT)
working ...
>> 10:35:30 PREPARE: END OF PHASE JOB_RSCVINIT
>> 10:35:30 PREPARE: START OF PHASE RUN_RSPTBFIL_PREP
Starting of PUTTB initial filling in batch (job RSPTBFIL)
working ...
>> 10:35:35 PREPARE: END OF PHASE RUN_RSPTBFIL_PREP
>> 10:35:35 PREPARE: START OF PHASE READPUTTB_INI
>> 10:35:35 PREPARE: END OF PHASE READPUTTB_INI
>> 10:35:35 PREPARE: START OF PHASE JOB_RDDGENRS
Starting of GENERATE REPORTS in batch (job RDDGENRS)
working ...
>> 10:35:40 PREPARE: END OF PHASE JOB_RDDGENRS
>> 10:35:40 PREPARE: START OF PHASE RUN_RDDITCUG
>> 10:35:40 PREPARE: END OF PHASE RUN_RDDITCUG
>> 10:35:40 PREPARE: START OF PHASE RUN_RSINCGEN_IMP
Starting of PRE INCLUDE GENERATION in batch (job RSINCGEN)
working ...
>> 10:35:44 PREPARE: END OF PHASE RUN_RSINCGEN_IMP
>> 10:35:44 PREPARE: START OF PHASE TR_BUF2HEAP_INSTIMP
>> 10:35:44 PREPARE: END OF PHASE TR_BUF2HEAP_INSTIMP
>> 10:35:44 PREPARE: START OF PHASE TR_EXT2HEAP
>> 10:35:44 PREPARE: END OF PHASE TR_EXT2HEAP
>> 10:35:44 PREPARE: START OF PHASE TR_MODACT_IMP
>> 10:36:00 PREPARE: END OF PHASE TR_MODACT_IMP
>> 10:36:00 PREPARE: START OF PHASE SQLSCREXE_UPGPAR
>> 10:36:00 PREPARE: END OF PHASE SQLSCREXE_UPGPAR
>> 10:36:00 PREPARE: START OF PHASE SQLDB_PARAMCOMP
>> 10:36:00 PREPARE: END OF PHASE SQLDB_PARAMCOMP
>> 10:36:01 PREPARE: START OF PHASE CHECKGROUP_END2
Execution of PREPARE module Import ends at 20080513103601
Execution of PREPARE module Extension begins at 20080513103601
>> 10:36:01 PREPARE: START OF PHASE RUN_RSTODIRM_CLEAN
Starting of TODIR-CLEAN in batch (job RSTODIRM)
working ...
>> 10:36:05 PREPARE: END OF PHASE RUN_RSTODIRM_CLEAN
>> 10:36:05 PREPARE: START OF PHASE MULTSPC_UC
>> 10:36:05 PREPARE: END OF PHASE MULTSPC_UC
>> 10:36:05 PREPARE: START OF PHASE ADDSPAREQ_0
>> 10:36:05 PREPARE: END OF PHASE ADDSPAREQ_0
>> 10:36:05 PREPARE: START OF PHASE EXECLANG
>> 10:36:10 PREPARE: END OF PHASE EXECLANG
>> 10:36:10 PREPARE: START OF PHASE LANG_CHK
>> 10:36:10 PREPARE: END OF PHASE LANG_CHK
>> 10:36:10 PREPARE: START OF PHASE LANG_SELECT
working on V:\SCM2007\D51032924\LANG1 ...
working on V:\SCM2007\D51032924\LANG2 ...
working on V:\SCM2007\D51032924\LANG3 ...
>> 10:36:26 PREPARE: END OF PHASE LANG_SELECT
>> 10:36:26 PREPARE: START OF PHASE RUN_RSUPGSLI
Starting of Configure selective-language-import option in batch (job RSUPGSLI)
working ...
>> 10:36:30 PREPARE: END OF PHASE RUN_RSUPGSLI
>> 10:36:30 PREPARE: START OF PHASE SPAM_CHK_INI
>> 10:36:32 PREPARE: END OF PHASE SPAM_CHK_INI
>> 10:36:32 PREPARE: START OF PHASE UPLOAD_REQUEST
If you intend to include Add-on Upgrades or Support Packages
into the upgrade, you can now make available the needed CDs
and packages.
All fitting CDs and packages will then be chosen as default
selection in the phase IS_SELECT for the Add-on Packages and CDs
and in the phase BIND_PATCH for the Support Packages
Do you want to add (further) Add-on CDs?
? Yes
? No
Waiting for input since May 13, 2008 10:36:36 AM
> No
Do you want to search for new packages in directory "
DEVCISCD\sapmntSCD\trans\EPS\in"?
? Search
? Skip
Waiting for input since May 13, 2008 11:11:23 AM
> Search
uploading data ...
>> 11:11:31 PREPARE: END OF PHASE UPLOAD_REQUEST
>> 11:11:31 PREPARE: START OF PHASE JOB_CBUPIFCHK
>> 11:11:31 PREPARE: END OF PHASE JOB_CBUPIFCHK
>> 11:11:31 PREPARE: START OF PHASE NCVERS_READ
>> 11:11:31 PREPARE: END OF PHASE NCVERS_READ
>> 11:11:31 PREPARE: START OF PHASE COMPINFO_EXP
>> 11:11:31 PREPARE: END OF PHASE COMPINFO_EXP
>> 11:11:31 PREPARE: START OF PHASE JOB_RDDPURI2
Starting of DDIC-CLEANING in batch (job RDDPURI2)
working ...
>> 11:11:41 PREPARE: END OF PHASE JOB_RDDPURI2
>> 11:11:41 PREPARE: START OF PHASE IS_MV_CHK1
>> 11:11:41 PREPARE: END OF PHASE IS_MV_CHK1
>> 11:11:41 PREPARE: START OF PHASE NAVERS_READ
>> 11:11:41 PREPARE: END OF PHASE NAVERS_READ
>> 11:11:41 PREPARE: START OF PHASE IS_INIT
>> 11:11:41 PREPARE: END OF PHASE IS_INIT
>> 11:11:41 PREPARE: START OF PHASE IS_INST_BICONT
>> 11:11:41 PREPARE: END OF PHASE IS_INST_BICONT
>> 11:11:41 PREPARE: START OF PHASE IS_INST_LIST
>> 11:11:41 PREPARE: END OF PHASE IS_INST_LIST
>> 11:11:41 PREPARE: START OF PHASE IS_MOVEMENT
>> 11:11:41 PREPARE: END OF PHASE IS_MOVEMENT
>> 11:11:41 PREPARE: START OF PHASE COMPINFO_ISMV
>> 11:11:42 PREPARE: END OF PHASE COMPINFO_ISMV
>> 11:11:42 PREPARE: START OF PHASE SFW_MOVEMENT
>> 11:11:42 PREPARE: END OF PHASE SFW_MOVEMENT
>> 11:11:42 PREPARE: START OF PHASE COMPINFO_SFWMV
>> 11:11:42 PREPARE: END OF PHASE COMPINFO_SFWMV
>> 11:11:42 PREPARE: START OF PHASE ADDONSPEC_OIL
>> 11:11:42 PREPARE: END OF PHASE ADDONSPEC_OIL
>> 11:11:42 PREPARE: START OF PHASE ADDONSPEC_ISPSCA
>> 11:11:42 PREPARE: END OF PHASE ADDONSPEC_ISPSCA
>> 11:11:42 PREPARE: START OF PHASE RUN_RSUPGSFW
>> 11:11:42 PREPARE: END OF PHASE RUN_RSUPGSFW
>> 11:11:42 PREPARE: START OF PHASE RUN_RSUPGSFW7
>> 11:11:42 PREPARE: END OF PHASE RUN_RSUPGSFW7
>> 11:11:42 PREPARE: START OF PHASE IS_TABDMP
>> 11:11:42 PREPARE: END OF PHASE IS_TABDMP
>> 11:11:42 PREPARE: START OF PHASE IS_SELECT
Product update and media decision overview:
Decide about update type and the Add On media kind.
Select the Add-on you want to make or change a decision:
Select no product, if you are finished.
? Add-on Id Start Rel Dest Rel Status Note
? BI_CONT 703 703 KEEP VERSION 632429
? EA-IPPE 400 400 KEEP VERSION 632429
? LCAPPS 2005_700 2006_700 INST/UPG WITH STD CD 632429
? PI_BASIS 2005_1_700 2006_1_700 INST/UPG WITH STD CD 570810
? QIE 200 200 KEEP VERSION 632429
? SAP_AP 700 700 KEEP VERSION 632429
? ST-PI 2005_1_700 2005_1_700 KEEP VERSION 769519
Waiting for input since May 13, 2008 11:11:42 AM
Validating pre-set decisions of remaining Add-ons ...
... Add-on BI_CONT (KEEP VERSION)
... Add-on EA-IPPE (KEEP VERSION)
... Add-on LCAPPS (INST/UPG WITH STD CD)
... Add-on PI_BASIS (INST/UPG WITH STD CD)
... Add-on QIE (KEEP VERSION)
... Add-on SAP_AP (KEEP VERSION)
... Add-on ST-PI (KEEP VERSION)
>> 11:11:58 PREPARE: END OF PHASE IS_SELECT
>> 11:11:58 PREPARE: START OF PHASE COMPINFO_ADDON
>> 11:11:58 PREPARE: END OF PHASE COMPINFO_ADDON
>> 11:11:58 PREPARE: START OF PHASE ADDON_QCALC
>> 11:11:59 PREPARE: END OF PHASE ADDON_QCALC
>> 11:11:59 PREPARE: START OF PHASE IS_MV_CHK2
>> 11:11:59 PREPARE: END OF PHASE IS_MV_CHK2
>> 11:11:59 PREPARE: START OF PHASE TR_EXPPKG2HEAP
>> 11:11:59 PREPARE: END OF PHASE TR_EXPPKG2HEAP
>> 11:11:59 PREPARE: START OF PHASE PATCHK_EQUI
>> 11:11:59 PREPARE: END OF PHASE PATCHK_EQUI
>> 11:11:59 PREPARE: START OF PHASE PATCH_CHK3
>> 11:12:04 PREPARE: END OF PHASE PATCH_CHK3
>> 11:12:04 PREPARE: START OF PHASE EXEC_CPYFIL3_CBU
>> 11:12:04 PREPARE: END OF PHASE EXEC_CPYFIL3_CBU
>> 11:12:04 PREPARE: START OF PHASE BIND_PATCH
Do you want to search for new packages in directory
"
DEVCISCD\sapmntSCD\trans\EPS\in" first?
This scan may run for some minutes. You can skip the inbox scan,
if the package descriptions have been uploaded already to this system.
? Search
? Skip
Waiting for input since May 13, 2008 11:12:04 AM
> Search
uploading data ...
According to the uploaded packages the queue calculator
could generate a valid support package queue.
Do you want to take over the calculated package levels
as default selection?
? Yes
? No
? Show Selection
Waiting for input since May 13, 2008 11:12:11 AM
> Yes
>>>>>>>>>> Input Wizard <<<<<<<<<<
Please select the Support Packages to include:
Support Package Level
Component min equi current select
? SAP_BASIS <none> <none> 0013
? SAP_ABA <none> <none> 0013
? PI_BASIS <none> 0002 0001
? ST-PI <none> <none> 0003
? SAP_BW <none> <none> 0015
? LCAPPS <none> 0002 0001
? SAP_AP <none> <none> 0010
? EA-IPPE <none> <none> 0010
? SCEMSRV 0002 <none> <none>
? SCM 0001 0003 <none>
? SCMBPLUS 0001 <none> <none>
? SCMEWM 0001 <none> <none>
? SCMSNC 0001 <none> <none>
? SCM_BASIS 0003 0006 0001
? QIE <none> <none> 0005
? BI_CONT <none> <none> 0008
Waiting for input since May 13, 2008 11:12:16 AM
> SAP_BASIS <none> <none> 0013 14> SAP_ABA <none> <none> 0013 14> PI_BASIS <none> 0002 0001 4> ST-PI <none> <none> 0003 5> SAP_BW <none> <none> 0015 16> LCAPPS <none> 0002 0001 4> SAP_AP <none> <none> 0010 12> EA-IPPE <none> <none> 0010 > SCEMSRV 0002 <none> <none> 6> SCM 0001 0003 <none> 3> SCMBPLUS 0001 <none> <none> 5> SCMEWM 0001 <none> <none> 3> SCMSNC 0001 <none> <none> 5> SCM_BASIS 0003 0006 0001 8> QIE <none> <none> 0005 > BI_CONT <none> <none> 0008
Extracting 42 package(s) ...
(This may take some time)
Do you want to include a Single Change Request?
? No
? Yes
Waiting for input since May 13, 2008 11:14:39 AM
> No
The following packages will be included:
Component SAP_BASIS Support Package (SAP_BASIS) 14
Component SAP_ABA Support Package (SAP_ABA) 14
Component PI_BASIS Support Package (PI_BASIS) 2 - 4
Component ST-PI Support Package (ST-PI) 4 - 5
Component SAP_BW Support Package (SAP_BW) 16
Component LCAPPS Support Package (LCAPPS) 2 - 4
Component SAP_AP Support Package (SAP_AP) 11 - 12
Component SCEMSRV Support Package (SCEMSRV) 1 - 6
Component SCM Support Package (SCM) 1 - 3
Component SCMBPLUS Support Package (SCMBPLUS) 1 - 5
Component SCMEWM Support Package (SCMEWM) 1 - 3
Component SCMSNC Support Package (SCMSNC) 1 - 5
Component SCM_BASIS Support Package (SCM_BASIS) 2 - 8
The total size of all data files is 405235 KBytes.
? Confirm
? Change Selection
Waiting for input since May 13, 2008 11:14:54 AM
> Confirm
>> 11:15:01 PREPARE: END OF PHASE BIND_PATCH
>> 11:15:01 PREPARE: START OF PHASE COMPINFO_SPP
>> 11:15:01 PREPARE: END OF PHASE COMPINFO_SPP
>> 11:15:01 PREPARE: START OF PHASE ADDON_LANGINC
>> 11:15:01 PREPARE: END OF PHASE ADDON_LANGINC
>> 11:15:01 PREPARE: START OF PHASE TR_CMDIMPORT_FDTASKS
>> 11:15:01 PREPARE: END OF PHASE TR_CMDIMPORT_FDTASKS
>> 11:15:01 PREPARE: START OF PHASE IS_MERGE
>> 11:15:01 PREPARE: END OF PHASE IS_MERGE
>> 11:15:01 PREPARE: START OF PHASE TR_QUEUE2HEAP
>> 11:15:01 PREPARE: END OF PHASE TR_QUEUE2HEAP
>> 11:15:01 PREPARE: START OF PHASE TR_CMDIMPORT_PREPARE
>> 11:16:47 PREPARE: END OF PHASE TR_CMDIMPORT_PREPARE
>> 11:16:47 PREPARE: START OF PHASE JOB_RDDIT020
Starting of ADD ON TASK MERGE in batch (job RDDIT020)
working ...
>> 11:16:52 PREPARE: END OF PHASE JOB_RDDIT020
>> 11:16:52 PREPARE: START OF PHASE IS_SYNC_20
>> 11:16:52 PREPARE: END OF PHASE IS_SYNC_20
>> 11:16:52 PREPARE: START OF PHASE CONFLICT_CHECK
>> 11:17:43 PREPARE: END OF PHASE CONFLICT_CHECK
>> 11:17:43 PREPARE: START OF PHASE ADJUSTPRP
For automatically maintaining your modifications in your system
during the upgrade transport requests from earlier upgrades are
searched in file umodauto.lst in directory
DEVCISCD\sapmntSCD\trans\bin.
The file could not be read.
There are several reasons why this may be correct,
e.g. "this is your first upgrade" or "your system is not modified".
Did you expect a list of transports being found?
? no
? yes
Waiting for input since May 13, 2008 11:17:43 AM
> no
INFO: No transports from a previous upgrade will be used.
All modification maintenance has to be done manually.
See ADJUSTPRP.LOG for more information.
>> 11:17:53 PREPARE: END OF PHASE ADJUSTPRP
>> 11:17:53 PREPARE: START OF PHASE INTEG_PATCH
>> 11:17:53 PREPARE: END OF PHASE INTEG_PATCH
>> 11:17:53 PREPARE: START OF PHASE UCMIG_REQINC
>> 11:17:53 PREPARE: END OF PHASE UCMIG_REQINC
>> 11:17:53 PREPARE: START OF PHASE ICNVXRQ
>> 11:17:53 PREPARE: END OF PHASE ICNVXRQ
>> 11:17:53 PREPARE: START OF PHASE CHECKGROUP_END3
Execution of PREPARE module Extension ends at 20080513111753
Execution of PREPARE module Integration begins at 20080513111753
>> 11:17:53 PREPARE: START OF PHASE IS_MERGE_I
>> 11:17:53 PREPARE: END OF PHASE IS_MERGE_I
>> 11:17:53 PREPARE: START OF PHASE RUN_RSTODIRM_BIND
Starting of TODIR-PREPARE in batch (job RSTODIRM)
working ...
>> 11:17:58 PREPARE: END OF PHASE RUN_RSTODIRM_BIND
>> 11:17:58 PREPARE: START OF PHASE TR_TODIR_MERGE_PATCH
Starting of TODIR merge of TR group PREPARE_TODIRMERGE in batch (job RSPATMRG)
working ...
>> 11:19:32 PREPARE: END OF PHASE TR_TODIR_MERGE_PATCH
>> 11:19:32 PREPARE: START OF PHASE JOB_RDDIT021
Starting of ADD ON MERGE in batch (job RDDIT021)
working ...
>> 11:19:42 PREPARE: END OF PHASE JOB_RDDIT021
>> 11:19:42 PREPARE: START OF PHASE JOB_RSPREMRG
Starting of TODIR-MERGE for preshipment in batch (job RSPREMRG)
working ...
>> 11:19:47 PREPARE: END OF PHASE JOB_RSPREMRG
>> 11:19:47 PREPARE: START OF PHASE UVERS_UP_T
>> 11:19:48 PREPARE: END OF PHASE UVERS_UP_T
>> 11:19:48 PREPARE: START OF PHASE TR_MODACT_ADD
>> 11:20:04 PREPARE: END OF PHASE TR_MODACT_ADD
>> 11:20:04 PREPARE: START OF PHASE TR_MODACT_DISC
>> 11:20:54 PREPARE: END OF PHASE TR_MODACT_DISC
>> 11:20:54 PREPARE: START OF PHASE TR_COLLTABS_PREP
>> 11:20:54 PREPARE: END OF PHASE TR_COLLTABS_PREP
>> 11:20:54 PREPARE: START OF PHASE TABSPC_PREP
determining table sizes ...
determining index sizes via tp call...
>> 11:21:42 PREPARE: END OF PHASE TABSPC_PREP
>> 11:21:42 PREPARE: START OF PHASE ADDSPAREQ_N
>> 11:21:42 PREPARE: END OF PHASE ADDSPAREQ_N
>> 11:21:42 PREPARE: START OF PHASE ADDSPAREQ_S
>> 11:21:42 PREPARE: END OF PHASE ADDSPAREQ_S
>> 11:21:42 PREPARE: START OF PHASE ADDSPAREQ_T
>> 11:21:42 PREPARE: END OF PHASE ADDSPAREQ_T
>> 11:21:42 PREPARE: START OF PHASE CHECKGROUP_END10
Execution of PREPARE module Integration ends at 20080513112142
Execution of PREPARE module Installation begins at 20080513112142
>> 11:21:42 PREPARE: START OF PHASE INITSHD
INFO: During the upgrade a temporary instance is installed
to perform the modification adjustment and activation.
For the installation of the shadow system instance,
you have to supply unused instance numbers.
? continue
? cancel
Waiting for input since May 13, 2008 11:21:42 AM
> continue
Supply the following information:
Enter an unused instance number for the shadow system:
? INSTANCE NUMBER =
Waiting for input since May 13, 2008 11:21:50 AM
> INSTANCE NUMBER = 14
For the upgrade strategy -Downtime-minimized- there is
the option to run the so-called shadow instance
on an additional application server of your system landscape.
Are you planning to apply this possibility?
? no
? yes
Waiting for input since May 13, 2008 11:21:53 AM
> no
>> 11:22:07 PREPARE: END OF PHASE INITSHD
>> 11:22:07 PREPARE: START OF PHASE SHDINST_CRE
The SAP service SAPSCD_14 has been uninstalled successfully
Removing directory tree O:\usr\sap\put\SCD
>> 11:22:38 PREPARE: END OF PHASE SHDINST_CRE
>> 11:22:38 PREPARE: START OF PHASE SHDINST_CPY
You have the alternative to use the profiles
from a test upgrade with identical environment
for the so-called shadow instance. If you choose
this alternative the profiles will be taken from
the subdirectory <save>.
Please also refer to the upgrade manual for more details!
Do you want to take the profiles?
? no
? yes
Waiting for input since May 13, 2008 11:22:39 AM
> no
SEVERE ERROR: copy of O:\usr\sap\put\bin\NTINSTASCS.PFL failed
? continue
? cancel
Waiting for input since May 13, 2008 11:22:47 AM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Report Inappropriate Content
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
- Getting ready to start using SAP Focused Run in Technology Blogs by SAP
- Question regarding Brown Field Key User Extensibility and leveraging ABAP Managed Fields in CFLs. in Technology Q&A
- What’s New in SAP Analytics Cloud Release 2024.02 in Technology Blogs by SAP
- SAP IQ のための容易なインストーラー - 「Q」 in Technology Blogs by SAP
- Unveiling SAP BusinessObjects BI 4.3 SP04 ! in Technology Blogs by SAP
| User | Count |
|---|---|
| 78 | |
| 10 | |
| 9 | |
| 7 | |
| 6 | |
| 6 | |
| 5 | |
| 5 | |
| 5 | |
| 4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.