ABAP Inbound Proxy Error !

[Former Member]

Hi ,

I am forwarding Vendor Data from SRM EBP to SUS with the predifined proxies given by SAP, bu t i get below error when it reaches SUS System.Message processing both in SAP EBP and SAP XI is fine.

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

- <!-- Call Inbound Proxy

-->

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">

<SAP:Category>XIProxy</SAP:Category>

<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>

<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>

<SAP:P2>CL_BBPX_TRADING_PARTNER_IN</SAP:P2>

<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>

<SAP:P4 />

<SAP:AdditionalText />

<SAP:ApplicationFaultMessage namespace="" />

<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack> <SAP:Retry>M</SAP:Retry>

</SAP:Error>

Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application

[Former Member]

ur exception handling is not working..

check ur code.

[Former Member]

Hi ,

Am getting this error in sxmb_moni in srm system

Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error.

Doc is not flowing from XI TO SRM.

Please suggest.

Regards,

Manu

[Former Member]

Hi,

There is some problem in your proxy logic as the data which you are passing from XI does not exists. Try changing the data and execute.

The best way to debug is to execute the proxy standalone by passing the data which you are actually sending at runtime from XI. Pick the payload from sxmb_moni and execute the proxy in your SAP system from transaction sproxy. You will get same error there. Change the data/logic and test it again. Once it is successful from here, it should work from End to End

Thanks

Amit

Reward points if suggestion helps

[Former Member]

Hi attached trace, kindly update wat could be the problem in case of EBP SUS Vendor replication

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

- <!-- Call Inbound Proxy

-->

- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">

<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />

- <!-- ************************************

-->

<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=receiver</Trace>

<Trace level="1" type="T">COMMIT is done by XMB !</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />

<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />

<Trace level="1" type="T">****************************************************</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">XMB entry processing</Trace>

<Trace level="1" type="T">system-ID = SSR</Trace>

<Trace level="1" type="T">client = 100</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = WIP-SRINUS</Trace>

<Trace level="1" type="Timestamp">2008-04-25T04:58:21Z CET</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">****************************************************</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />

- <!-- ************************************

-->

<Trace level="1" type="T">Message-GUID = DD128437FD4A75F193690017A4F3435A</Trace>

<Trace level="1" type="T">PLNAME = RECEIVER</Trace>

<Trace level="1" type="T">QOS = EO</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />

<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>

<Trace level="1" type="T">Queue name : XBTR0001</Trace>

<Trace level="1" type="T">Generated prefixed queue name = XBTR0001</Trace>

<Trace level="1" type="T">Schedule message in qRFC environment</Trace>

<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="T">Going to persist message</Trace>

<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>

<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>

<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>

<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

- <!-- ************************************

-->

<Trace level="1" type="T">--start sender interface action determination</Trace>

<Trace level="1" type="T">select interface *</Trace>

<Trace level="1" type="T">select interface namespace</Trace>

<Trace level="1" type="T">no interface found</Trace>

<Trace level="1" type="T">--start receiver interface action determination</Trace>

<Trace level="1" type="T">Loop 0000000001</Trace>

<Trace level="1" type="T">select interface SupplierPortalTradingPartner_CreateOrChange_In*</Trace>

<Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/SupplierEnablement</Trace>;

<Trace level="1" type="T">no interface found</Trace>

<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>

<Trace level="1" type="T">Hence set action to DEL</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />

<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>

<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />

- <!-- ************************************

-->

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>

<Trace level="1" type="T">system-ID = SSR</Trace>

<Trace level="1" type="T">client = 100</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = WIP-SRINUS</Trace>

<Trace level="1" type="Timestamp">2008-04-25T04:58:24Z CET</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />

<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>

<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />

- <!-- ************************************

-->

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="Inbound Framework" />

- <!-- ************************************

-->

- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">

- <asx:values>

<CX_ERROR href="#o97" />

</asx:values>

- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">

- <cls:CX_SY_NO_HANDLER id="o97">

- <CX_ROOT>

<TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>

<PREVIOUS href="#o96" />

<KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>

- <INTERNAL_SOURCE_POS>

<PROGID>297</PROGID>

<CONTID>1564</CONTID>

</INTERNAL_SOURCE_POS>

</CX_ROOT>

<CX_NO_CHECK />

- <CX_SY_NO_HANDLER>

<CLASSNAME>CX_BBPX1_STD_MESSAGE_FAULT</CLASSNAME>

</CX_SY_NO_HANDLER>

</cls:CX_SY_NO_HANDLER>

- <cls:CX_BBPX1_STD_MESSAGE_FAULT id="o96">

- <CX_ROOT>

<TEXTID>65B8FEB5F43CC949B7CD662AB888ED34</TEXTID>

<PREVIOUS />

<KERNEL_ERRID />

- <INTERNAL_SOURCE_POS>

<PROGID>297</PROGID>

<CONTID>1738</CONTID>

</INTERNAL_SOURCE_POS>

</CX_ROOT>

<CX_DYNAMIC_CHECK />

<CX_AI_APPLICATION_FAULT />

- <CX_BBPX1_STD_MESSAGE_FAULT>

<AUTOMATIC_RETRY />

<CONTROLLER />

<NO_RETRY />

- <STANDARD>

<CONTROLLER />

*<FAULT_TEXT>An error occured within an XI interface: Exception occurredE:BBP_BUPA:034 -Organizational unit 00000008 does not exist; check entries Programm:* CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>

<FAULT_URL />

<FAULT_DETAIL />

</STANDARD>

</CX_BBPX1_STD_MESSAGE_FAULT>

</cls:CX_BBPX1_STD_MESSAGE_FAULT>

</asx:heap>

</asx:abap>

</Trace>

<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />

<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

- <!-- ************************************

-->

</SAP:Trace>

[former_member859847]

Hi Venkat,

In the trace, it is showing the following error.

i,e "<FAULT_TEXT>An error occured within an XI interface: Exception occurredE:BBP_BUPA:034 -Organizational unit 00000008 does not exist; check entries Programm".

where it is showing organizational unit filed value 000000008

does not exits.

please check necessary validations in the sample code under the proxy method.

regards

mahesh.

[Former Member]

Hi Attaching Trace

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

- <!-- Call Inbound Proxy

-->

- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">

<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />

- <!-- ************************************

-->

<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=receiver</Trace>

<Trace level="1" type="T">COMMIT is done by XMB !</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />

<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />

<Trace level="1" type="T">****************************************************</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">XMB entry processing</Trace>

<Trace level="1" type="T">system-ID = SSR</Trace>

<Trace level="1" type="T">client = 100</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = WIP-SRINUS</Trace>

<Trace level="1" type="Timestamp">2008-04-23T14:55:10Z CET</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">****************************************************</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />

- <!-- ************************************

-->

<Trace level="1" type="T">Message-GUID = DD1145430BDF11F193690017A4F3435A</Trace>

<Trace level="1" type="T">PLNAME = RECEIVER</Trace>

<Trace level="1" type="T">QOS = EO</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />

<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>

<Trace level="1" type="T">Queue name : XBTR0009</Trace>

<Trace level="1" type="T">Generated prefixed queue name = XBTR0009</Trace>

<Trace level="1" type="T">Schedule message in qRFC environment</Trace>

<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="T">Going to persist message</Trace>

<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>

<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>

<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>

<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

- <!-- ************************************

-->

<Trace level="1" type="T">--start sender interface action determination</Trace>

<Trace level="1" type="T">select interface *</Trace>

<Trace level="1" type="T">select interface namespace</Trace>

<Trace level="1" type="T">no interface found</Trace>

<Trace level="1" type="T">--start receiver interface action determination</Trace>

<Trace level="1" type="T">Loop 0000000001</Trace>

<Trace level="1" type="T">select interface SupplierPortalTradingPartner_CreateOrChange_In*</Trace>

<Trace level="1" type="T">select interface namespace http://sap.com/xi/EBP</Trace>;

<Trace level="1" type="T">no interface found</Trace>

<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>

<Trace level="1" type="T">Hence set action to DEL</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />

<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>

<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />

- <!-- ************************************

-->

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>

<Trace level="1" type="T">system-ID = SSR</Trace>

<Trace level="1" type="T">client = 100</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = WIP-SRINUS</Trace>

<Trace level="1" type="Timestamp">2008-04-23T14:55:10Z CET</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />

<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>

<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />

- <!-- ************************************

-->

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="Inbound Framework" />

- <!-- ************************************

-->

- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">

- <asx:values>

<CX_ERROR href="#o87" />

</asx:values>

- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">

- <cls:CX_SY_NO_HANDLER id="o87">

- <CX_ROOT>

<TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>

<PREVIOUS href="#o86" />

<KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>

- <INTERNAL_SOURCE_POS>

<PROGID>297</PROGID>

<CONTID>1564</CONTID>

</INTERNAL_SOURCE_POS>

</CX_ROOT>

<CX_NO_CHECK />

- <CX_SY_NO_HANDLER>

<CLASSNAME>CX_BBPX1_STD_MESSAGE_FAULT</CLASSNAME>

</CX_SY_NO_HANDLER>

</cls:CX_SY_NO_HANDLER>

- <cls:CX_BBPX1_STD_MESSAGE_FAULT id="o86">

- <CX_ROOT>

<TEXTID>65B8FEB5F43CC949B7CD662AB888ED34</TEXTID>

<PREVIOUS />

<KERNEL_ERRID />

- <INTERNAL_SOURCE_POS>

<PROGID>297</PROGID>

<CONTID>1738</CONTID>

</INTERNAL_SOURCE_POS>

</CX_ROOT>

<CX_DYNAMIC_CHECK />

<CX_AI_APPLICATION_FAULT />

- <CX_BBPX1_STD_MESSAGE_FAULT>

<AUTOMATIC_RETRY />

<CONTROLLER />

<NO_RETRY />

- <STANDARD>

<CONTROLLER />

<FAULT_TEXT>An error occured within an XI interface: Exception occurredE:BBP_BUPA_SUPPLIER:089 -Unable to determine logical system of sender; check your data Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>

<FAULT_URL />

<FAULT_DETAIL />

</STANDARD>

</CX_BBPX1_STD_MESSAGE_FAULT>

</cls:CX_BBPX1_STD_MESSAGE_FAULT>

</asx:heap>

</asx:abap>

</Trace>

<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />

<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

- <!-- ************************************

-->

</SAP:Trace>

[former_member859847]

Hi,

The trace saying clearly log as follows.

<FAULT_TEXT>An error occured within an XI interface: Exception occurredE:BBP_BUPA_SUPPLIER:089 -Unable to determine logical system of sender; check your data Programm

could you please check the logical system to the

corresponding Business sytem.

regards

mahesh.

[shivhare]

Hi Venkateswarlu Srinivas

go to message mapping and use test tool for testing conversion of message i think error will come during message mapping

Thanks

Amit Shivhare

[Former Member]

Hi

MM works fine , i guess it some where problem with inbound proxies , wherein i should catch the expection.

Can any one hit on with the solution if u have come across as above. bit urgent

With regards

Srini

[former_member859847]

Hi Venkat,

The error may be due to following cases.

1. Assume the data which coming to one filed in proxy structre

may be more than actual length.

2. some fields may be numeric , in runtime they will come with white spaces.

in this case, try to remove whitespaces for those fields using

trim function.

first check the trace in SXMB_moni, where u find the exact field problem.

still u r facing problem , please send the trace content from SXMB_moni.

warm regards

mahesh.