on 04-04-2008 2:46 PM
Hi!
I am using SAP Solution Manager with SP15.
After several configuration SMD configuration steps I cannot see the data under E2E Workload Analysis.
When I run the SMD wizard for the portal solution all the steps besides the first one are running without error.
The error I get:
Type: Wilyhost agent
Message: Retrieving list of Enterprise Managers failed: No Enterprise Managers configured for Queries
Step Wilyhost Agent Details
Created destination E11_JC00_server0
Created action SAP GC|E11_JC00_server0 - SAP GC|E11_JC00_server0
Created 1 action(s).
Retrieving list of Enterprise Managers failed: No Enterprise Managers configured for Queries
Exceptions
java.sql.SQLException: No Enterprise Managers configured for Queries
at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:224)
at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:377)
at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:423)
at com.sap.sup.admin.wily.jdbc.EMOverview.getAgentEMgrs(EMOverview.java:242)
at com.sap.sup.admin.wily.hostagent.Setup.emCanBeAccessed(Setup.java:417)
at com.sap.sup.admin.wily.hostagent.Setup.executeSetup(Setup.java:90)
at com.sap.sup.admin.setup.AppCfgTasks.configureEPAgent(AppCfgTasks.java:109)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:309)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:263)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:655)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:28)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:903)
at java.lang.Thread.run(Thread.java:534)
Any helpful information concerning the solution the problem above will be appreciated.
regards
Thom
It is a old question
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
When I am re-starting the Wily EM (Version 7.2) it gives the below log -
Running Enterprise Manager with IHOME=.
Running Enterprise Manager with JAVAPATH=/usr/sap/SMZ/ccms/wilyintroscope/jre
java version "1.5.0_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_08-b03)
Java HotSpot(TM) Server VM (build 1.5.0_08-b03, mixed mode)
Database was not normally closed: start recovery
Recovery completed
Database was not normally closed: start recovery
Recovery completed
log4j:ERROR Failed to flush writer,
java.io.InterruptedIOException
at java.io.FileOutputStream.writeBytes(Native Method)
at java.io.FileOutputStream.write(Unknown Source)
at sun.nio.cs.StreamEncoder$CharsetSE.writeBytes(Unknown Source)
at sun.nio.cs.StreamEncoder$CharsetSE.implFlushBuffer(Unknown Source)
at sun.nio.cs.StreamEncoder$CharsetSE.implFlush(Unknown Source)
at sun.nio.cs.StreamEncoder.flush(Unknown Source)
at java.io.OutputStreamWriter.flush(Unknown Source)
at com.wily.org.apache.log4j.helpers.QuietWriter.flush(Unknown Source)
at com.wily.org.apache.log4j.WriterAppender.subAppend(Unknown Source)
at com.wily.org.apache.log4j.RollingFileAppender.subAppend(Unknown Source)
at com.wily.org.apache.log4j.WriterAppender.append(Unknown Source)
at com.wily.org.apache.log4j.AppenderSkeleton.doAppend(Unknown Source)
at com.wily.org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(Unknown Source)
at com.wily.org.apache.log4j.Category.callAppenders(Unknown Source)
at com.wily.org.apache.log4j.Category.forcedLog(Unknown Source)
at com.wily.org.apache.log4j.Category.log(Unknown Source)
at com.wily.util.feedback.backend.log4j.Log4JBackend.log(Log4JBackend.java:139)
at com.wily.util.feedback.ADefaultModuleFeedbackChannel.doLog(ADefaultModuleFeedbackChannel.java:545)
at com.wily.util.feedback.ADefaultModuleFeedbackChannel.logbottleneck(ADefaultModuleFeedbackChannel.java:524)
at com.wily.util.feedback.ADefaultModuleFeedbackChannel.log(ADefaultModuleFeedbackChannel.java:479)
at com.wily.util.feedback.ADefaultModuleFeedbackChannel.error(ADefaultModuleFeedbackChannel.java:313)
at com.wily.util.event.ListenerTracker.sendEventToOneListener(ListenerTracker.java:148)
at com.wily.util.event.EventPump.immediateDeliverEventIfListenerNotDead(EventPump.java:152)
at com.wily.util.event.EventPump.immediateDeliverTargetEventAsync(EventPump.java:135)
at com.wily.util.event.EventPump.access$500(EventPump.java:23)
at com.wily.util.event.EventPump$Posting.deliver(EventPump.java:518)
at com.wily.util.event.EventPump$EventPumpThread.run(EventPump.java:760)
************************************
************************************
Introscope Enterprise Manager failed to start because:
A socket port was already in use (see the log for the port number)
Press 'Enter' to acknowledge....
Any idea on this issue ??
Hi,
I'm trying to setup Diagnostics server(E2E)
failes with error
Failed to access RFC meta data of E2E_EFWK_WIZARD_CREATE_BTC_HK on ABAP Host=XXXXXX sys=00 client=100 user=DDIC.
No E2E_EFWK_WIZARD_CREATE_BTC_HK dest were created in solman as well as in BI systems,
Please guide.
Thanks in advance
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Thanks successfully completed DS setup.
while running managed system setup it says
jstartup/recorder missing (for what we use this parameter).
Also if i'm using new SMD agent(7.2) do i need to install EP agents also(i read in some docs that we no need to install EPA).
I'm on solman SPS15, Portals 12.
Please guide
Thanks in advance
Check http://service.sap.com/diagnostics - the E2E setup guide has the complete parameter you need to enter in the Java instance profile (and restart).
Markus
Also check note 1159369, although it didn't work for me; because I got the same error in the proposed self-check...
If anyone else has some idea... it would be great...
Fermín.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Thom
I'm getting the same error also with SP15. I've found an error in the log IntroscopeEnterpriseManager.log;
Failed to start SNMP Agent com.wily.introscope.spec.server.beans.snmp.SnmpException: SNMP Agent failed to start on port "161" using "Introscope-Madvirt01" MIB. Caused by: monfox.toolkit.snmp.engine.SnmpTransportException: Address already in use: Cannot bind
It looks it cannot start Introscope EM.
Do you have an error like this?
Have you find something else to fix this?
Regards,
Fermí
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi!
As mentioned, earlier I solved the problem.
I do not know whether it is/was the solution, but I have updated th EP Server version from 7.1 to 7.2 and restarted the Server wizard. After this all the steps were green.
Meanwhile this successfull server wizard installation I could not see any data under E2E Workload analysis.
regards,
THom
Hi!
Thanks everybody for your answers.
It looks the problem, as mentioned before, was the wrong user/password in tab Wily/NWA in SMD diagnostics tab.
Also there was a strange thing; after I fixed this; the Introscope byte code setup for the managed system still said that there was not Introscope EM connection; I had to restart de Java stack of Solution Manager to fix it. It sounds strange... but it is working finally.
Thanks everybody.
Kind regards,
Fermín.
User | Count |
---|---|
83 | |
10 | |
10 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.