on 03-25-2008 6:47 AM
Dear all,
I've a total of 0 broken DCs in EPD_EMITRACK_D..and all these Dcs are healthy,built successfully .but in EPD_EMI_TRACK_C,there's one broken DC,and it leads to fail of transportation of the activity. Any idea how to solve it? thank you
Regards,
Joan
Hi Joan,
I would considet using the DTR command line tool to analyze the versions... I have seen this a few times before where they get out of whack a bit in C but D is fine.
If this fails, try re-initializing the compartment.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
That certainly should not happen. Please double check the CBS as a compartment re-initialize should rebuild the CBS from the latest DTR active versions, it will take a while.
Of the compartment stays empty then that is scary and ideally should be investigated. If it stays empty then that indicates a lack of connection with the DTR or the DTR C active workspace is also empty which is the scary thing.
I am hoping you did the DTR command line investigations first as recommended.
If you have for some strange reason lost C then you need your last SCA assembled and also any DC's that have been put into C since that can probably be got from the Archive directory. I am on holiday this week so will have trouble responding at speed, I am sorry keep me posted, but hopefully someone else can also tuck in here.
I would strongly recommend that if an initialize fails that you raise a call with SAP as this should not happen
Hi Joan,
As Graham has written it is strange that you lost the DCs in Cons after re-initializing the compartment. Please check in DTR if there are DCs under cons workspace. If there are, then dropping the buildspace in CBS and saving the track should help you in getting the buildspace again with correct number of DCs.
When you save the track, CBS will try to build the content from DTR by creating the required buildspace if nothing exist. Hope this helps you.
Akshatha
Hi Joan,
What does the CBS build log for that DC show?
Akshatha
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Akshatha,
the build log is as follow :
[wdgen] [Error] ml_tm.bintobin.BinToBin --> ContextModelNode
Zfm_Read_Maktx_Input [modelClass]: The context model node has not been
bound to a model class (Hint: A Context model node has to be bound to a
model class or mapped to a model node of another controller.)
[wdgen] [Error] ml_tm.bintobin.BinToBin --> ContextModelNode
Read_Maktx_Output [modelClass]: The context model node has not been
bound to a model class (Hint: A Context model node has to be bound to a
model class or mapped to a model node of another controller.)
[wdgen] [Info] ml_tm.bintobin.BinToBin --> ContextModelNode
Read_Maktx_Output [supplyingRelationRole]: Supply function or supplying
relation role missing (Hint: A child node which is not mapped must have
either a supplying relation role or a supply function or one of its
parent nodes must have a supply function.)
[wdgen] [Error] ml_tm.bintobin.BinToBin --> ContextModelNode
Zl_To_Confirm_1Step_Input [modelClass]: The context model node has not
been bound to a model class (Hint: A Context model node has to be bound
to a model class or mapped to a model node of another controller.)
[wdgen] [Error] ml_tm.bintobin.BinToBin --> ContextModelNode
Outpu_confirm [modelClass]: The context model node has not been bound to
a model class (Hint: A Context model node has to be bound to a model
class or mapped to a model node of another controller.)
[wdgen] [Info] ml_tm.bintobin.BinToBin --> ContextModelNode
Outpu_confirm [supplyingRelationRole]: Supply function or supplying
relation role missing (Hint: A child node which is not mapped must have
either a supplying relation role or a supply function or one of its
parent nodes must have a supply function.)
[wdgen] [Error] ml_tm.bintobin.BinToBin --> ContextModelNode
Ta_Ltap_Conf_input [modelClass]: The context model node has not been
bound to a model class (Hint: A Context model node has to be bound to a
model class or mapped to a model node of another controller.)
[wdgen] [Info] ml_tm.bintobin.BinToBin --> ContextModelNode
Ta_Ltap_Conf_input [supplyingRelationRole]: Supply function or supplying
relation role missing (Hint: A child node which is not mapped must have
either a supplying relation role or a supply function or one of its
parent nodes must have a supply function.)
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder --> Label
Label_str_bin_0 [labelFor]: labelFor is not set
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder --> Label
Label_matnr [labelFor]: labelFor is not set
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder --> Label
Label_pick_qty [labelFor]: labelFor is not set
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder --> Label
Label_uom [labelFor]: labelFor is not set
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder --> Label
Label_batch_no [labelFor]: labelFor is not set
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder -->
UIElement BarCodeReader [onRead]: Action and event are not compatible
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder -->
UIElementEventBinding onRead: Parameter scanData(string) cannot be
supplied
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder -->
InputField storage_bin_2: UIElement does not have a label
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder -->
InputField material_no: UIElement does not have a label
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder -->
InputField pick_qty: UIElement does not have a label
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder -->
InputField uom: UIElement does not have a label
[wdgen] [Warning] ml_tm.bintobin.crto.CreateTransferOrder -->
InputField batch_no: UIElement does not have a label
[wdgen] [Warning] ml_tm.bintobin.ConfirmNewTransferOrder --> Label
lb_trnsorder [labelFor]: labelFor is not set
[wdgen] [Warning] ml_tm.bintobin.ConfirmNewTransferOrder -->
UIElement BarCodeReader [onRead]: Action and event are not compatible
[wdgen] [Warning] ml_tm.bintobin.ConfirmNewTransferOrder -->
UIElementEventBinding onRead: Parameter scanData(string) cannot be
supplied
[wdgen] [Warning] ml_tm.bintobin.ConfirmNewTransferOrder -->
InputField transfer_order: UIElement does not have a label
[wdgen] [Warning] my.tm.ml.to.create.newto.CreateNewTransferOrder
--> Label Label_MatDoc [labelFor]: labelFor is not set
[wdgen] [Warning] my.tm.ml.to.create.newto.CreateNewTransferOrder
--> UIElement BarCodeReader [onRead]: Action and event are not
compatible
[wdgen] [Warning] my.tm.ml.to.create.newto.CreateNewTransferOrder
--> UIElementEventBinding onRead: Parameter scanData(string) cannot be
supplied
[wdgen] [Warning] my.tm.ml.to.create.newto.CreateNewTransferOrder
--> InputField InputField_MatDoc: UIElement does not have a label
[wdgen] [Warning] ml_tm.bintobin.cto.ConfirmTransferOrder --> Label
lb_trnsorder [labelFor]: labelFor is not set
[wdgen] [Warning] ml_tm.bintobin.cto.ConfirmTransferOrder -->
UIElement BarCodeReader [onRead]: Action and event are not compatible
[wdgen] [Warning] ml_tm.bintobin.cto.ConfirmTransferOrder -->
UIElementEventBinding onRead: Parameter scanData(string) cannot be
supplied
[wdgen] [Warning] ml_tm.bintobin.cto.ConfirmTransferOrder -->
InputField transfer_order: UIElement does not have a label
[wdgen] [Info] Catching throwable null
[wdgen] [Info]
com.sap.webdynpro.generation.ant.GenerationAntTaskError
[wdgen] at
com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(Generatio
nAnt.java:153)
[wdgen] at
com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2048)
[wdgen] at
com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(
Generation.java:1297)
[wdgen] at
com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(Gene
rationConsole.java:175)
[wdgen] at
com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:5
0)
[wdgen] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
[wdgen] at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.jav
a(Compiled Code))
[wdgen] at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.jav
a(Compiled Code))
[wdgen] at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessor
Impl.java(Compiled Code))
[wdgen] at java.lang.reflect.Method.invoke(Method.java(Compiled
Code))
[wdgen] at
com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:
219)
[wdgen] at org.apache.tools.ant.Task.perform(Task.java:341)
[wdgen] at org.apache.tools.ant.Target.execute(Target.java:309)
[wdgen] at
org.apache.tools.ant.Target.performTasks(Target.java:336)
[wdgen] at
org.apache.tools.ant.Project.executeTarget(Project.java:1339)
[wdgen] at
com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115
)
[wdgen] at
com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAc
tion.java:65)
[wdgen] at
com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPl
ugin.java:226)
[wdgen] at
com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:2
02)
[wdgen] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
[wdgen] at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.jav
a(Compiled Code))
[wdgen] at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.jav
a(Compiled Code))
[wdgen] at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessor
Impl.java(Compiled Code))
[wdgen] at java.lang.reflect.Method.invoke(Method.java(Compiled
Code))
[wdgen] at
com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.j
ava:114)
[wdgen] at
com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicator
V2.java:42)
[wdgen] at
com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginH
andlerImpl.java:354)
[wdgen] at
com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:17
6)
[wdgen] at
com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
[wdgen] at
com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1498)
[wdgen] at
com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.j
ava:727)
[wdgen] at
com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildContro
ller.java:503)
[wdgen] at
com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildContro
ller.java:442)
[wdgen] at
com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.jav
a:314)
[wdgen] at
com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.ja
va:252)
[wdgen] at
com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildControlle
r.java:207)
[wdgen] at
com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.ja
va:168)
[wdgen] ERROR: Unknown exception during generation null
(com.sap.webdynpro.generation.ant.GenerationAntTaskError)
[wdgen] ERROR: Generation failed due to errors (2 seconds)
Ant runtime 6.175 seconds
Ant build finished with ERRORS
[Error] Generation failed!
Error: Build stopped due to an error: [Error] Generation failed!
Build plugin finished at 2008-03-25 07:02:50 GMT+00:00
Total build plugin runtime: 7.062 seconds
Build finished with ERROR
for ur information,previoiusly i got this built log for the track_D as well,but after i add in the necessary files to the DTR..everything is fine,and built succesfully,but now for this Track_c..it cannot transport due to this built error,broken dc.any idea ? thanks
User | Count |
---|---|
89 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.