Error at PHASE SHD_FIX_IMP in R/3 upgrade.

[Former Member]

Hi,

i am getting the below error:

UPGRADE/SHADOW: END OF PHASE SHD_FIX_IMP

>> 13:00:28 UPGRADE/SHADOW: START OF PHASE SHD_FIX_IMP

running C:\usr\sap\put\exe\tp.exe pf=C:\usr\sap\put\bin\SHD_FIX.TPP put DEV

tp terminated successfully.

analyzing result of tp call ...

ERROR: 6 errors detected during SHD_FIX_IMP.

Analyze summary error logfile SHD_FIX.ELG

and remove all error conditions in the way

it is described in the upgrade manual. Repeat

this phase until it is error free.

Additional hints may be given in logfiles

SLOG640 and C:\usr\sap\put\log\R3up.ECO

**************************************************

• LIST OF ERRORS AND RETURN CODES *******

**************************************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

CUSTOMER MAIN IMPORT ERRORS and RETURN CODE in B20I8A2NLM.DEV

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2EETW000 Probably the data file was destroyed during file transfer!?

2EETW000 Probably the data file was destroyed during file transfer!?

2EETW000 Probably the data file was destroyed during file transfer!?

1 ETP111 exit code : "8"

C:\usr\sap\put\exe\R3trans.exe finished (0000).

Syslog: k CPG : &0000&C&0000& rscploc 9Syslog: k CP3 : 0000&TCPDB& rscpmi 1This is C:\usr\sap\put\exe\R3trans.exe version 6.09 (release 640 - 05.04.04 - 14:45:00).

C:\usr\sap\put\exe\R3trans.exe finished (0004).

Syslog: k CPG : &0000&C&0000& rscploc 9Syslog: k CP3 : 0000&TCPDB& rscpmi 1This is C:\usr\sap\put\exe\R3trans.exe version 6.09 (release 640 - 05.04.04 - 14:45:00).

2EETW000 Probably the data file was destroyed during file transfer!?

2EETW000 Probably the data file was destroyed during file transfer!?

2EETW000 Probably the data file was destroyed during file transfer!?

C:\usr\sap\put\exe\R3trans.exe finished (0008).

stopping on error 8 during MAIN IMPORT

tp returncode summary:

TOOLS: Highest return code of single steps was: 8

WARNS: Highest tp internal warning was: 0118

tp finished with return code: 8

meaning:

A tool used by tp produced errors

sapparam: sapargv( argc, argv) has not been called.

sapparam(1c): No Profile used.

sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

ERROR: stopping on error 8 during MAIN IMPORT

Process with ID 3528 terminated with status 8

Deleting file C:\usr\sap\put\log\SHD_FIX.ELG

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B20I8A1JJN.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B20I8A2NLM.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B4AI009743.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B4AI009755.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B4AI009759.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B4AI009760.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B4AI009780.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B6AI005685.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\F8HI900010.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\RS6I900005.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\Y6DI012127.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\Y6DI022467.DEV

Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\Y6DI042418.DEV

Moving file C:\usr\sap\put\log\SHD_FIX.ELG to C:\usr\sap\put\tmp\SHD_FIX.ELG

Deleting file C:\usr\sap\put\tmp\MSGIN.LST

Deleting file C:\usr\sap\put\tmp\MSGOUT.LST

Deleting file C:\usr\sap\put\tmp\MSGOUT.LOG

Deleting file C:\usr\sap\put\tmp\SHD_FIX.ELG

[Former Member · Accepted solution]

Did you copy the FIX file in your upgrade <DIR>

Keep repeating this Phase until the errors are free or not till a point its not reducing. After that you can Ignore and continue.

Make sure you have the recent R3trans and tp file in ../put/exe

Check Note 813658 - Repairs for upgrades to products based on SAP NW 2004s AS

Cheers

Shaji

[Former Member · Accepted solution]

hi

already i kept the FIX_ECC500SR1.SAR file in the put directory...but still i am getting the same error.

[Former Member · Accepted solution]

Can you paste the SHD_FIX.log here

Replace R3UP or SAPUP in ../put/bin according to the Version of the upgrade

Shaji

[Former Member · Accepted solution]

Here is the SHD_FIX_IMP.LOG

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

CUSTOMER MAIN IMPORT ERRORS and RETURN CODE in B20I8A2NLM.DEV

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2EETW000 Probably the data file was destroyed during file transfer!?

2EETW000 Probably the data file was destroyed during file transfer!?

2EETW000 Probably the data file was destroyed during file transfer!?

1 ETP111 exit code : "8"

[Former Member · Accepted solution]

Hi. I'm think the solution in note 828320 -->

"Phase: SHD_FIX_IMP

Description: The upgrade is terminated during the SHD_FIX_IMP phase. In file SHD_FIX.ELG you find the following error message: CUSTOMER MAIN IMPORT ERRORS and RETURN CODE in B20I8A22VT.WEK

2EETW000 Probably the data file was destroyed during file transfer!?

1 ETP111 exit code: "8"

To solve this problem, proceed as follows:

1. Download the latest R3trans for SAP_KERNEL 7.00 from SAP Service

Marketplace.

2. Exchange R3trans in the exe subdirectory of the upgrade directory. Do not exchange any other files!

3. Repeat the phase."

Regards. Award if helpful.

[Former Member · Accepted solution]

hi,

i replaced R3trans version 7.00 then i got the below error:

\usr\sap\put\exe>R3trans -d

This is R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).

2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."

R3trans finished (0012).

[Former Member · Accepted solution]

Hi. read this note 556232 about connect failed with DBLI_RC_LOAD_LIB_FAILED.

Also you "Exchange R3trans in the exe subdirectory of the upgrade directory" ? Not in the sap kernel directory!

Regards.

Edited by: Sergo Beradze on Mar 22, 2008 2:02 PM

[Former Member]

Hello,

When you get this problem first thing down load the latest R3trans

then "uncar". Copy the uncar file into "/usr/sap/put/exe" after that

repet this phase again. After few seconds you get the error again then you do one thing Go to "/usr/sap/<SID>/SYS/exe/run" copy the all files resides in run directory and paste in "/usr/sap/put/exe"

then again repet the phase you get good output.

Thanks & Regards,

Sumanbabu.B