Where I am getting Mistake to configure Alert Monitoring setup (URGENT)

[Former Member]

Hi, there

We are using XI 3.0 and pretty much done these, but still Alerts are not emil even I am trying to simple email RZ20 alerts same problem....

I done these XDV with client 700

1. SCOT - SMTP & IMAIL is configured and running fine.... SCOT

2. RFC - Connection is running fine no errors with file "mlunxsnd"

3. SICF - Email SAPconnect and "alrtinbox" services are running and actived

4. SO01 - Eamil goes through fine with SAPconnect

5. SOST - Eamil received fine through SAPconnect

6. SU01 - Eamil address already define with method Internet

7. SU01 - User profile has "SAP_ALL" & "S_A.SCON"

8. SU01 - User Roles already define "SAP_BC_ALM_ALERT_USER"

9. SXMB_ADM - Integration Engine is configure and Add entries

Role of Business System selected "Integration Server"

PERF MEASUREMENT_LEVEL value 1 and 1

PERF MEASUREMENT_PERSIST value 1 and 0

MONITOR CCMS_MONITORING value 1 and value 1

10. Configure and Sender/Receiver ID has "empty table"

11. Goto sm30 selected table "ALXMBPFALERT" clieck "maintain"

CCMS Alert node: "CCMS Monitoring XI Testing"

SENDER and RECEIVER I just put "Testing all fields"

Please tell me what is next steps

Thanks a lot

[Former Member · Accepted solution]

Have you done following steps ?

Define Alert category by running T-Code: ALRTCATDEF

Create alert rules in RWB -> Alert Configuration.

Liang

[Former Member · Accepted solution]

Hi Laing

Thanks for reply, I thing i done that also, but i am bit confouse about runtime workbench how to create alert in RWB...

when i goto alrtinbox tcode its does't show at all when i click on subscription its getting an error messages kind of services

as i know i already check alrtinbox services is actived, anyway!!! i will double check tomorrow and will you asked again

thanks

[Former Member · Accepted solution]

Hi, mtravisawan:

In short, Define alert category is the task that define:

• New type of alert - Means you create new alert

• What the alert message look like, what contents it include: e.g. messageID, sender or receiver information etc.

• Receipients of this type of alert

In Alert Rule, you need to specify the condition that the alert occur:

• Where did the alert occur ? Integration Engine or Adapter Engine, or no restriction

• What is the conditions, you can specify Sender and Receiver Informations

• Same type of alert happen, do you want show just once, or show them every time it happen?

Liang

[Former Member · Accepted solution]

helpful but I already done it...

we forget RWB password, and how to lognin RWB

please advice

[Former Member · Accepted solution]

HI,

The password for XIRWBUSER is to be set sane as of the time of installed one.

If you wish to reset the password for XIRWBUSER

The XISUPER user has a pwd of XIPASS.

During the installation, SAPinst automatically creates SAP Exchange Infrastructure specific service users.

For each user, SAPinst creates also a password that you can define here. SAPinst displays two dialogs in a row, where you can define the password

1.Check the Exchange Profile and transaction SU01, try to reset the password

2.Restart the J2EE Engine to activate changes in the Exchange Profile, IF NOT IN PRODUCTION.

Thanks

Swarup

[former_member238007]

Hi,

Check this same problem..

see the configuration according to this..

/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function

/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping

/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration

/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config

/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 -- ccms alerts – 1

/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 -- ccms alerts – 2

/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 -- ccms alerts --- 3

Alerts with variables from the messages payload (XI) - UPDATED -

/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated

http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm

From HelpFile

regards,

Kishore

[Former Member]

hi,

check the link below to trouble shoot the problem

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b63220-9697-2910-cf9c-cc666543...

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00d98222-9e87-2910-9fbb-f4e6359d...

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51a...

note:reward points if solution found helpfull.....

regards

chandrakanth.k

[Former Member]

Hi, dear

I am using this refrence for XI alert monitors, and having some problem some options please help me out thanks

sapconnect is working fine...

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51a...

Page: 5

Refresh Exchange Profile Parameters

Question1: this is RWB and I forget password for XIRWBUSER user already created what sould I do?

Question2: how to load visual administrator?

Page: 6

Register CCMSR Agent

Question: Should I need to registeration for this? and how

Page: 8

Users and Authorizations

Create an RFC user with the role SAP_BC_ALM_ALERT_USER

for inbound processing and for sending alerts by using external

communication methods such as email, SMS, or fax.

Question: What RFC user name ?

same page

Question: Set Up the Central Alert Server right now its said none

sould I put someting on it?

Page: 9

sould I have to create Schedule Alert Processing? and Create a Report Variant?

Page:11

End-to-End Monitoring?

Page:12

Question: Configure End-to-End Monitoring (how to do that?)

Page:13

Schedule Alert Report

will I have to do that?

Page:15 to Page: 17

Enable Adapter Engine to Send Alerts to CCMS

Question: how to load this probelm

Question: its just show right now Exchange Infrastructure Monitor (no subtree)

[former_member238007]

Hi Awan.,

Page: 5

Refresh Exchange Profile Parameters

Question1: this is RWB and I forget password for XIRWBUSER user already created what sould I do?

Question2: how to load visual administrator?

Check this notes NOTE:::::721548

Page: 6

Register CCMSR Agent

Question: Should I need to registeration for this? and how

Check this

/people/prasadbabu.nemalikanti3/blog/2006/02/13/configuration-of-a-central-integration-server

Page: 8

Users and Authorizations

Create an RFC user with the role SAP_BC_ALM_ALERT_USER

for inbound processing and for sending alerts by using external

communication methods such as email, SMS, or fax.

Section 1: Logging on to UME

1.Enter the following html address: http://<host_name>:5<instance number>00/

2.Click User Management.

3.Log on using your training ID and password.

Section 2: How to Create a User

1.Log on to UME. For instructions, refer to “Section 1: Logging on to UME.”

2.Click Create User to access the Create User screen.

3.Enter data in the following required fields:

&#56256;&#56451;User ID

&#56256;&#56451;Define Password

&#56256;&#56451;Confirm Password

&#56256;&#56451;Last Name

&#56256;&#56451;First Name

&#56256;&#56451;E-Mail Address

4.Maintain other data as necessary.

5.Click Create.

Section 3: How to Create a Role

1.Log on to UME. For instructions, refer to “Logging on to UME.”

2.Click Roles to access the Create/Maintain Roles screen.

3.Click Create/New to access the Create a new role screen.

4.Type Role Name.

5.Type Description.

6.Select one or more actions from Available Actions.

7.Click Add to add Actions to Selected Actions.

8.Click Save.

Section 4: How to Assign Users to a Role

1.Log on to UME. For instructions, refer to “Logging on to UME.”

2.Click Roles to access the Create/Maintain Roles screen.

3.Enter search criteria in the New Search field, and then click Search.

You can use a wildcard (*) to search for Roles.

4.Select one ore more Roles to which you will assign users, and then click Assign Users to….

The system displays all users assigned to the role.

5.Click to access the Search for User screen.

6.Enter search criteria.

7.Click Search to access the Search Result(s) screen.

8.Select the user to assign.

9.Click Select to assign user and return to Assign User(s) screen.

All users assigned to the Role are displayed. Ensure that the user id that you selected is shown.

10.Click Continue to return to the Create/Maintain Roles screen.

Question: What RFC user name ?

same page

Question: Set Up the Central Alert Server right now its said none

sould I put someting on it?

Page: 9

sould I have to create Schedule Alert Processing? and Create a Report Variant?

Page:11

End-to-End Monitoring?

Page:12

Question: Configure End-to-End Monitoring (how to do that?)

Page:13

Schedule Alert Report

will I have to do that?

Page:15 to Page: 17

Enable Adapter Engine to Send Alerts to CCMS

Question: how to load this probelm

Question: its just show right now Exchange Infrastructure Monitor (no subtree)

regards,

Kishore..

[Former Member]

Check the following

http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm