on 03-19-2008 10:18 AM
Hi people
All configuration's are over in R3, that are LS, RFC des, PORT, PP, DM those configration i created. after completion of that,
i gone to PI system in that i configured RFC, PORT those configuration i created,
after that what we have to do, if any more configuration is required,
some people are said to me go WE19, In that i given some details but in that some IDOC NO is there what is that what we have to give in that,
please tell me, what i need to configure if anything is req ASAP
regards
shekar
hi,
You have configured all steps that are required to send IDoc from application system to XI.
WE19 is used only for testing purpose. If you want to send a test IDocs you might want to fill in all segments/fileds manually or you can provide existing IDoc No as a template. Then you need to press "Start outbound processing".
Regards,
Jakub
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Log in to sender system, go to transaction WE19 (test tool to generate IDoc), generate IDoc of the required message type.
Give Receiver and Sender System Info(Port, Partner No, Port Type and Message Type) and click on Continue
Now put some entry into the IDoc before you send
Now click on Standard outbound processing button the following screen will appear: Click on continue again continue. In the last window Idoc sent to Sap system or external program information should appear else you may have to check Receiver and Sender System Info(Port, Partner No, Port Type and Message Type) for valid entry
Execute Transaction WE05; enter correct date/time frame and logical message type. Hopefully the Idoc Status should be 3 (successful), if not check the status code and correct the error and reprocess the message.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
1.WE02 transaction can be used to get the error info
2. Execute Transaction WE05; enter correct date/time parameters etc and verify if the IDoc was created or not and if IDoc is in a successful status or not. If the Idoc is in Status-30(Yellow), you can push it again through Transaction BD87.
3. If the IDoc is located and status is successful but receiver has not received the IDoc, Execute transaction SM58 to determine if IDoc is stuck in the ALE/RFC layer. If entries exist in SM58, look for Message Type
4. If message type exist and Run the Program "RSARFCEX". If after the RSARFCEX program has ran and IDocs are not in SM58, issue should be solved. Validate in receiving system via WE05 that the IDoc was received or not.
5. If IDoc is still stuck in SM58, check RFC connection. Go to SE37, enter function module RFC_PING. We need to have access to SM59 to test the RFC Connection.
6. After an issue has been resolved and/or you need to process an IDoc, besides processing IDocs via programs, you can also process IDocs via Transaction BD87.
Hi people
i taken outbound partner profile is ORDER that idoc is IORDER basic type IORDER01 that i taken ofter that i created DM(bd64),
in ORDER idoc i am using, i configured all configurations means (RFC LS PORT) after completion of that what we have to do in ORDER idoc
what is the next process Please tell me that ASAP
regards
shekar
Hi,
This scenario is pretty similar to your: [A Beginner's Guide to SAP Exchange Infrastructure Settings, Part I|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692], I believe that you might make use of Message Control to send ORDERS01 IDoc.
Regards,
Jakub
SAP XI
******
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP XI towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
*******
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is #####+system number#.
g) In Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
What is ur scenario IDOC to FILE or FILE to IDOC. Give the description of scenario so that other can understand and suggest the solution.
IDOC testing using WE19
/people/sameer.shadab/blog/2005/07/25/reposting-idocs-instead-of-recreating--for-testing-purpose-xi
Also refer the below link for IDOC configuration:
ALE configuration for pushing idocs from SAP to XI
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
Chirag
User | Count |
---|---|
101 | |
13 | |
13 | |
11 | |
11 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.