on 03-15-2008 1:01 PM
Dear Gurus,
I am planning to install the two seprate R/3 4.7 Enterprise Ext.200 SR1 (central) instances on one host ( windows 2003 Standard R2 server.)
**Server Configuration :-**
**CPU :- Intel Xeon 3.0 Ghz.**
**RAM:- 4 GB**
**HDD :- 380 GB**
**OS :- Windows 2003 Standard Edition R2 SP1**
**Database :- Oracle 9.4.0.1**
**SAP :- R/3 4.7E X 200 SR1(NON UNICODE)**
I have query related to
1)On above system configuration the two sap instances will run or not?
2) Oracle that I have to install oracle two times or Can I create two databases using the single oracle executable directory ?
3) If I have to install oracle two times then what configuration I have to do to connect to the database?
4)What about the Host names ? I have to define two host names ? How ?
5) What activities I have to perform post installation ?
Please help me on this.
Thanks & Regards,
Sachin Sable
Ans to your query :
1)On above system configuration the two sap instances will run or not?
How many users are you trying to connect. I would say, it will work but you would have real performance issue.The above config is just ok types.
2) Oracle that I have to install oracle two times or Can I create two databases using the single oracle executable directory ?
You need to install oracle onc and have seperate databases for DEV & QAS
3) If I have to install oracle two times then what configuration I have to do to connect to the database?
4)What about the Host names ? I have to define two host names ? How ?
Only one hostname is request. mentioned it in the \WINDOWS\systemXX\drivers\etc\hosts and under My Computer - > Properties -> Computer Name tab
5) What activities I have to perform post installation ?
Post installation activites are mentioned in the Installation guide. https://websmp107.sap-ag.de/instguides
Regards
Shaji
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Shaji,
I am reopening the thread.
*2) Oracle that I have to install oracle two times or Can I create two databases using the single oracle executable directory ?*
*You need to install oracle onc and have seperate databases for DEV & QAS*
I changed the Oracle version from 9.2 to 10.2 as i want to install 64 bit database & 9.2 dont have 64 bit client released.
Can you please how to create the second database ?
One more query regarding this is if offline backup runs on development system in that case my QAS will run or it also goes down ?
I had open a thread for installing this two oracle homes on one host for your refrence.
Is it necesary to install the oracle again to achive the task ?
My second query is about the sapmnt folder & saposcol service on windows.
As i am installing two instances, two diffrent usr directories will create but shares with one sharing name sapmnt & try to run two SAPOSCOL service how can i avoid this conflict?
Please help me to clear my doubts.
Thanks,
Sachin
Edited by: Sachin Sable on May 27, 2008 8:15 AM
Hi Sachin,
SAPINST will help/guide you to create a DB instance using the existing Oracle Home.
You can skip the Oracle Installation step and continue with the DB instance setup step in SAPINST.
When you stop DEV instance (DB+CI for offline backup), your QAS will not have any affect and will be operational.
Both instance (DEV and QAS) will only have affect when you are upgrading Oracle software (patchset, Interim patches) since they are using same Oracle home.
Keep watching the thread that you created for Two Oracle Home on same host.
During the installation you will need to sapmnt/<SID> so there will be seperate folder in sapmnt with respective <SID>.
Ideally there should be only one saposcol service running on one host even if there are more than one SAP instances on the same host.
Hope this information helps you.
Regards,
Nilesh
Hi Nilesh,
I had successfull install oracle & going forard to CI.
At the time of CI installation it is taking the F: for SAP binaries.
On this drive there are binaries of dev instance is already present. I try to modify it but it is not modifiable.
Urgent help is required.
Thanks & Regards,
Sachin
HI,
On this drive there are binaries of dev instance is already present. I try to modify it but it is not modifiable
what you need to modify?
there is only one usr folder within one host.
for example right now you have f:\usr\sap\DEV
if you are going to install QAS then it's create new folder in f:\usr\sap\QAS
regards,
kaushal
Hi Sachin,
You got F: because of the preivous installation and system environment variables.
There can be more than 1 usr folder on same host but you need to choose different dirve.
If you want to keep your /usr/sap/DEV and /usr/sap/QAS different choose different dirve for your QAS installation for SAP Binaries.
Regards,
Nilesh
Hi Nilesh,
Please let me know how can I change the drive for SAP Binaries of second instance while running Sapinst as by default it takes the drive of First installed drive (i.e F: & I am unable to change it to another one),which I dont want to use.I want to use I: instad of this which will help me to keep seperate trans & other directories.
Waiting for your valuable reply.
Thanks & Regards,
Sachin
Hi,
if two instance are in single sap host then it's share common trans directory, and if instance are on different host then you can also set common transport directory for SAP system in landscape
SAP recommended to use common transport directory.
there is no problem arise due to common transport directory
in short without wasting your time just start the installation of QAS System.
regards,
kaushal
Hi Sachin,
As said earlier the entries are picked up due to the previous installation, rename your previous sapinst_instdir folder to sapinst_instdir.old and start the installation once again.
This folder should be available in your C:
Choose Custom option and not Typical during your installation step and enter your new drive letter new <SID> and <NR> and further inputs.
Regards,
Nilesh
Hi Nilesh/Kaushal
Thanks for your support, I really appriciate it.
I had install the QAS instance successfully on one sever.
Now both QAS & DEV instances are up & running.
But I am facing problem while executing transactions related to database i.e st04,st03,db12,db02.
After executing this transactions I received followng dumps.
1) Runtime Errors DBIF_DSQL2_SQL_ERROR
Exception CX_SY_NATIVE_SQL_ERROR
Database error text........: "ORA-00904: "KEY": invalid identifier"
Triggering SQL statement...: "FETCH NEXT "
Internal call code.........: "[DBDS/NEW DSQL]"
2) Runtime Errors RAISE_EXCEPTION
Exception condition "DB_RELEASE_UNKNOWN" raised
Error analysis
A RAISE statement in the program "SAPLSORA" raised the exception
condition "DB_RELEASE_UNKNOWN".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
3)Runtime Errors BCD_ZERODIVIDE
Exception CX_SY_ZERODIVIDE
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ZERODIVIDE', was neither
caught nor passed along using a RAISING clause, in the procedure
"SKOM_CT_PERF_BUF_REDO" "(FUNCTION)"
.
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
In the current program "SAPLSKOM", an arithmetic operation ('DIVIDE',
'/', 'DIV', or 'MOD') with a type P operand attempted to divide
by 0.
4) Runtime Errors COMPUTE_BCD_OVERFLOW
Exception CX_SY_ARITHMETIC_OVERFLOW
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ARITHMETIC_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"SKOM_CT_PERF_BUF_LIB" "(FUNCTION)"
.
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
An overflow has been determined in the current arithmetical operation
containing operands of type P. Possible causes include:
1. The results field of type P is to small and the result does not fit
into it.
places.
2. The result or partial result has more than 31 decimal places.
Thanks,
Sachin
Hi,
try to search sap notes for above error, if you are not able to find suitable notes then open new thread for this error.
provide details of databse release, kernel version , support package level of sap system in new thread.
close this thread.
regards,
kaushal
Edited by: kaushal malavia on May 29, 2008 12:21 PM
**Database :- Oracle 9.4.0.1**
9.4..0.1?? what's that? or just a typo meaning 9.2.0.1?
you will need to patch your oracle version to 9.2.0.8 (incl. several opatches), because this is the only supported oracle 9i version by now
GreetZ, AH
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
84 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.