problem with saprouter..

[Former Member]

Hi,

When I am giving the command 'saprouter -r' to start saprouter, I am getting the below error message..

trcfile dev_rout

no logging active

ERROR => invalid lines in ./saprouttab, see dev_rou[nirout.cpp 7989]

Kindly provide your inputs on the same.

Thanks and Regards,

Amit Jana.

Edited by: Amit Jana on Mar 13, 2008 8:10 AM

[Former Member]

Hi,

This problem has been solved..i tried to start the saprouter with command saprouter -r -S 3299 -K "p:<Your Distingushed Name>" and found from the dev_rout file that the certificate validity has been expired.. I have created a new certificate and now saprouter is working fine.

[Former Member]

Thank you for your reply Sergo. Those lines are commented in the saprouttab file.

please find below the content of the dev_rout file.

Kindly suggest.

-

---

Thu Mar 13 15:29:04 2008

SAP Network Interface Router, Version 37.11

command line arg 0: saprouter

command line arg 1: -r

main(): pid = 1704, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a SAProuter)

reading routtab: ./saprouttab

• ERROR => SNC field without SNC active, skip line 2 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 3 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 4 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 7 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 8 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 9 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 14 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 15 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 21 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 22 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 29 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 30 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 31 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 40 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 41 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 46 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 48 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 51 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 53 [nirout.cpp 7800]

• ERROR => SNC field without SNC active, skip line 55 [nirout.cpp 7800]

[Former Member]

As i'm say you need to read the documentation how to use the Secure Network

Communications (SNC).

If you use SNC then try to run saprouter with command:

saprouter -r -K

If you dont need to use SNC then comment all Lines which are specified in dev_rout.

Who advise you to enter these values in saprouttab?

Regards.

[Former Member]

Thanks for award points )

[Former Member]

Hi, Please find the contents of the saprouttab file

____________________________________________

1. SNC connection to and from SAP

KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *

KT "p:CN=sapserv2a, OU=SAProuter, O=SAP, C=DE" 147.104.100.36 *

KT "p:CN=sapserv3, OU=SAProuter, O=SAP, C=DE" 147.204.2.5 *

1. SNC-connection from SAP to local R/3-System for Support

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.233 3600

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.225 3600

KP "p:CN=sapserv2a, OU=SAProuter, O=SAP, C=DE" 10.101.71.233 *

#KP "p:CN=sapserv3, OU=SAProuter, O=SAP, C=DE" 10.101.71.230 *

#KP "p:CN=sapserv3, OU=SAProuter, O=SAP, C=DE" 10.101.71.64 *

1. SNC-connection from SAP to local R/3-System for Support

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.227 3601

KP "p:CN=sapserv2a, OU=SAProuter, O=SAP, C=DE" 10.101.71.227 *

#KP "p:CN=sapserv3, OU=SAProuter, O=SAP, C=DE" 10.101.71.230 *

#KP "p:CN=sapserv3, OU=SAProuter, O=SAP, C=DE" 10.101.71.64 *

#SNC-connection from SAP to local BW Devlopment system for Support

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.147 3600

KP "p:CN=sapserv2a, OU=SAProuter, O=SAP, C=DE" 10.101.71.147 3601

1. SNC-connection from SAP #to local R/3-System for pcAnywhere

#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.230 5631

1. SNC-connection from SAP to local R/3-System for SAPtelnet

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.233 23

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.120.11 23

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.225 23

1. SNC-connection from SAP to local R/3-System for Netmeeting

#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.230 1503

#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.146 1503

1. SNC-connection from SAP #to local SAP sysyem for WTS

#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.230 3389

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.146 3389

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.145 3389

1. outbound connections to <sapservX> will use SNC

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.233 3200

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.225 3200

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.227 3201

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.228 3202

KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.101.71.64 3201

P 10.101.71.233 194.39.131.34 3299

#P 10.101.71.233 * *

#P 10.101.71.147 * *

#P 10.101.71.225 * *

#P 10.101.71.228 * 3202

#P 10.101.120.112 * 3600

p 10.101.71.64 194.39.131.34 3299

P 194.39.131.34 10.101.71.230 3389

#P * * 3200

#P * * 3299

#P * * 3202

#P * * 3201

[Former Member]

First comment the Lines like " 1 SNC connection to and from SAP" or delete whem, second create the file dev_rout in this directory and try start the saprouter. After Read the file dev_rout.

Also have you read about how to use the SNC (Secure Network Communication) ?

Regards.

Edited by: Sergo Beradze on Mar 13, 2008 10:37 AM

[Former Member]

Hi. Have you a "saprouttab" file in same directory then you place a SAPROUTER? If yes post him. If not creat him ,

and for example write P * * * * in this file.

Im think you have this file but the entry in this file is incorrect.

Regards.