R3trans in /usr/sap/put/exe is too old

[semih_sarac]

Hi,

While upgrating from NetWeaver 700 i get following error at PREPARE. I change the R3trans version several times. But can not change the '15.01.08'.

What is the '15.01.08'? This the date of the which componant.

Is there any other log files?

Help please...

ERROR: The executable R3trans in /usr/sap/put/exe

is too old.

It needs a release date of

15.01.08 or later.

Please proceed as described in note 19466.

Here the log files;

/usr/sap/put/log/TOOLVERS.LOG

***********Beginning of data*************

1 ETQ201XEntering upgrade-phase ÜTOOLVERSION_INIÜ (Ü20080311125648Ü)

2 ETQ367 Connect variables are set for standard instance access

4 ETQ399 System-nr = '10', GwService = 'sapgw10'

4 ETQ399 Environment variables:

4 ETQ399 dbs_d4a_schema=SAPR3

4 ETQ399 auth_shadow_upgrade=0

1 ETQ399 Determining tool versions in directory '/usr/sap/BWT/SYS/exe/run':

2 ETQ399 TOOL-VERSION 'disp+work': SYS_DISPWORK_REL = '640'

2 ETQ399 TOOL-VERSION 'disp+work': SYS_DISPWORK_VARIANT = '640_REL'

2 ETQ399 TOOL-VERSION 'disp+work': SYS_DISPWORK_64BIT = 'ON'

2 ETQ399 TOOL-VERSION 'disp+work': SYS_DISPWORK_UNICODE = 'ON'

2 ETQ399 TOOL-VERSION 'disp+work': SYS_DISPWORK_DATE = 'Sep 12 2006 22:14:40'

2 ETQ399 TOOL-VERSION 'disp+work': SYS_DISPWORK_PATCHNUM = '147'

2 ETQ399 TOOL-VERSION 'tp': SYS_TP_VERSION = '340.16.24'

2 ETQ399 TOOL-VERSION 'tp': SYS_TP_REL = '640'

2 ETQ399 TOOL-VERSION 'tp': SYS_TP_PATCHNUM = '145'

2 ETQ399 TOOL-VERSION 'R3trans': SYS_R3TRANS_VERSION = '6.13'

2 ETQ399 TOOL-VERSION 'R3trans': SYS_R3TRANS_REL = '640'

2 ETQ399 TOOL-VERSION 'R3trans': SYS_R3TRANS_DATE = '25.07.06'

2 ETQ399 TOOL-VERSION 'R3trans': SYS_R3TRANS_PATCHNUM = '145'

1 ETQ399 Setting gpv_db_is_unicode to 1.

1 ETQ399 Comparing DATE '21.06.06' '25.07.06' -> -104

1 ETQ399 Comparing PATCHNUM '38' '147' -> -109

1 ETQ399 Comparing VERSION '340.16.05' '340.16.24' -> -1

1 ETQ202 Upgrade phase ÜTOOLVERSION_INIÜ completed sucessfully (Ü20080311125710Ü

***********End of Data*******************

/usr/sap/put/log/TOOLVRSUPG.LOG

***********Beginning of data*************

1 ETQ201XEntering upgrade-phase ÜTOOLVERSION_UPG1Ü (Ü20080311125711Ü)

2 ETQ367 Connect variables are set for standard instance access

4 ETQ399 System-nr = '10', GwService = 'sapgw10'

4 ETQ399 Environment variables:

4 ETQ399 dbs_d4a_schema=SAPR3

4 ETQ399 auth_shadow_upgrade=0

1 ETQ399 Determining tool versions in directory '/usr/sap/put/exe':

2 ETQ399 TOOL-VERSION 'disp+work': EXE_DISPWORK_REL = '700'

2 ETQ399 TOOL-VERSION 'disp+work': EXE_DISPWORK_VARIANT = '700_REL'

2 ETQ399 TOOL-VERSION 'disp+work': EXE_DISPWORK_64BIT = 'ON'

2 ETQ399 TOOL-VERSION 'disp+work': EXE_DISPWORK_UNICODE = 'ON'

2 ETQ399 TOOL-VERSION 'disp+work': EXE_DISPWORK_DATE = 'Jul 1 2007 21:57:27'

2 ETQ399 TOOL-VERSION 'disp+work': EXE_DISPWORK_PATCHNUM = '117'

2 ETQ399 TOOL-VERSION 'tp': EXE_TP_VERSION = '372.03.35'

2 ETQ399 TOOL-VERSION 'tp': EXE_TP_REL = '700'

2 ETQ399 TOOL-VERSION 'tp': EXE_TP_PATCHNUM = '113'

2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_VERSION = '6.14'

2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_REL = '700'

2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_DATE = '19.06.07'

2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_PATCHNUM = '116'

2 ETQ399 TOOL-VERSION 'R3load': EXE_R3LOAD_REL = '7.00'

2 ETQ399 TOOL-VERSION 'R3load': EXE_R3LOAD_VERSION = '1.4 ¬UNICODE|'

1 ETQ399 Comparing DATE '15.01.08' '19.06.07' -> 9496

1 ETQ202 Upgrade phase ÜTOOLVERSION_UPG1Ü completed sucessfully (Ü20080311125734

Best Regard

İbrahim Gürbü

[tj_wilkinson2]

Hello - I am having the same problem, but with a different upgrade (46C -> ERP 2005). Which kernel do I need to patch? The kernel of the current 46C system? Or one or both of the kernels from the kernel disc (SAP700OPT / SAP700NEW)? Thank you.

~TJ

[Former Member]

Hi TJ,

I typically use 145 or 146. I could provide you a download link for that completely patched kernel, which I typically implement in the upgrade.

Regards

Volker Gueldenpfennig, consolut international ag

http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

[Former Member]

Hello İbrahim,

You cannot change '15.01.08' because it is the requirement date, not the R3trans you downloaded.

From the log, the R3trans in your /usr/sap/put/exe (target release kernel) is compiled on '19.06.07' - before '15.01.08'.

From SWDC, the latest R3trans patch is R3trans_148-20001357.SAR - compiled on "Feb 22 2008", which should be sufficient.

Also download other parts of the target kernel?

Best regards,

Victor

[Former Member]

Hi,

... and then you need to patch DW to at least 135 as well, as R3trans will core otherwise ;-((

Regards

Volker Gueldenpfennig, consolut international ag

http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

[semih_sarac]

Hi Volker,

DW patch solved the problem. )

Thanks...

Best regards

İbrahim Gürbü

[Former Member]

Hello Ibrahim,

I am also getting the same problem as yours in Solution Manager 4.0 Upgrade.

I have downloaded the latest patches for R3trans and Disp+Work from market place and copied them on IFS rootbin tmp directory.

while trying to apply patches to Upgrade kernel in '/usr/sap/put/exe' with below command it is giving me error "kernel library does not exist"

Could you please help me out in this.... what parameters to be passed in SAVF & KRNLIB?

Errors:

APYR3FIX SID(I40) SAVF(QGPL/DW) SAVLIB(GEN700OPT) KRNLIB(DW) EXEPATH('/sap/usr/put/exe') FROMHOST(LOCAL) FROMDIR('/tmp/i40') FROMFILE(SAR)

APYR3FIX: Kernel library DW does not exist

Errors occurred in command.

APYR3FIX SID(I40) SAVF(QGPL/R3trans) SAVLIB(GEN700OPT) KRNLIB(R3trans) EXEPATH('/sap/usr/put/exe') FROMHOST(LOCAL) FROMDIR('/tmp/i40') FROMFILE(SAR)

APYR3FIX: Kernel library R3TRANS does not exist

Errors occurred in command.

Regards,

Shafi

[Former Member]

Hi,

you can apply DW fix using following command.

• APYR3FIX SID(<sid>) SAVF(QTEMP/<tool>) SAVLIB(GEN700<x>OPT) KRNLIB(<700-kernel>)

• APYSAP TYPE(*KERNEL) SID(<sid>) DSTLIB(<700-kernel>) DSTDIR('<DIR_PUT>/exe')

where tool = DW

<sid> = you sap system ID.

<700-kernel> = your kernel library

GEN700<x>OPT = x indicate U or N

regards,

kaushal

[Former Member]

Thanks Kaushal!

Appreciate your quick resonse... when i tried your command now atleast it seems to apply the fix but it is giving an error "Failed to apply R3 fix" any inputs regarding this error...

APYR3FIX SID(I40) SAVF(QTEMP/DW) SAVLIB(GEN700AOPT) KRNLIB(SAP700NEW)

Ownership of object DW in QTEMP type *FILE changed.

File DW created in library QTEMP.

Authority given to user R3OWNER for object DW in QTEMP object type *FILE.

Object authority granted.

Library PCHI40 deleted.

Ownership of object PCHI40 in QSYS type *LIB changed.

Library PCHI40 created.

Retrieving patch save file...

Save file DW in library QTEMP cleared.

Object APYR3FIX in QTEMP type *FILE deleted.

File APYR3FIX created in library QTEMP.

Member CMD added to file APYR3FIX in QTEMP.

Member LOG added to file APYR3FIX in QTEMP.

Link added.

Link added.

Link added.

Error: /usr/sap/I40/SYS/exe/run/SAPCAR -xvf /tmp/DW.SAR -R /QSYS.LIB/QTEMP.LIB -flat DW.FILE failed.

Failed to apply R/3 fix.

Regards,

Shafi

[Former Member]

Hi,

Before applying fix stop the sap system.

check Note 49365 - iSeries: Importing a patch

and apply DW patch according to note.

if you still facing a problem then open a new thread with problem.

regards,

kaushal

[Former Member]

Hi Kaushal,

I have to apply this Fix for R3trans & Disp+Work for upgrade kernel in directory "/usr/sap/put/exe" not in current /usr/sap/I40/SYS/exe... for this also do I still need to stop the system....

Please correct me if am wrong...

Regards,

Shafi

[Former Member]

Hi,

you can not apply DW patch on running sap system, so first stop sap system.

regards,

kaushal

[Former Member]

Thanks Kaushal!

I will try this...

Regards,

Shafi