BPM

[Former Member]

1.Can someone tell me what is Exactly BPM means in XI.Is it necessary to be used.

Also plz tell if for BPM we need to have multiple senders and recievers?

2.Can someone post a blog or send me a link which tells me how to configure BPM on IR &ID ,its very basics and also explain the various steps such as send/recieve and fork etc... and their meanings

I am new to concept of BPM.So plz help me learn it from a simple material to understand its basics correctly

Thanx

[Former Member · Accepted solution]

Hi,

1.Can someone tell me what is Exactly BPM means in XI.Is it necessary to be used.

Also plz tell if for BPM we need to have multiple senders and recievers?

A)

what is CCBPM and purpose:

An integration process is an executable, cross-system process for processing messages. In an integration process you define all the process steps that are to be executed and the parameters relevant for controlling the process.

You implement integration processes when you want to define, control, and monitor complex integration processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).

Refer below link for more detail:

http://help.sap.com/saphelp_nw70/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm

BPM is used in following cases:

http://help.sap.com/saphelp_nw70/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm

http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm

http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm

http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm

http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm

http://help.sap.com/saphelp_nw04/helpdata/en/ca/7c5c41fe06cf1ee10000000a155106/content.htm

http://help.sap.com/saphelp_nw04/helpdata/en/e8/8e2d4233c8db2ce10000000a1550b0/content.htm

If you have a requirement where you need to collect the IDOC for some duration of time suppose 15 min then at that time you can go ahead with the BPM now again this will differ on requirement to requirement.

BPM is usually used for multimapping mapping scenarios.

Check this weblog for a step by step procedure:

/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm

/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit

for case study go thru this blog:

/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm

for checklist:

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193...

Take a look at this blog for some very good guidelines on when to use BPM's and when not to use BPM,

/people/swen.conrad/blog/2006/12/22/xi-ccbpm-performance-under-perform-or-out-perform

2.Can someone post a blog or send me a link which tells me how to configure BPM on IR &ID ,its very basics and also explain the various steps such as send/recieve and fork etc... and their meanings

A) It is already provided by amny people.

Thnx

Chirag

[Former Member]

Hi,

1.Can someone tell me what is Exactly BPM means in XI.Is it necessary to be used.

Also plz tell if for BPM we need to have multiple senders and recievers?

To deal with Multiple sender and receivers based on the conditions we could use BPM. Its one of the feature of BPM, but its not mandatory to go for BPM for each n every case. Its depends upon scnenario.

/people/marilyn.pratt/blog/2007/10/12/clubhouse-las-vegas-a-bpm-roadmap

BPM Process Patterns:Repeatable Design for BPM Process Models

http://www.bptrends.com/publicationfiles/05%2D06%2DWP%2DBPMProcessPatterns%2DAtwood1%2Epdf

With its business process management (BPM)

capability, SAP NetWeaver allows you to respond quickly and

effectively to new process requirements while optimizing your

systems landscape.

With its BPM capability, SAP NetWeaver:

• Exploits business-process efficiency by giving your business

users the ability to directly model, manage, monitor, and

analyze business processes

• Enables continuous process improvement and the dynamic

modification of business processes

• Extends the value of your company’s core business investment

and maximizes the return on its strategic assets by providing

the ability to change process rules without additional IT

investment

• Provides greater visibility into critical business operations for

better decision making by delivering the right information at

the right time

• Allows the integration of people, applications, and internal

and external resources

2.Can someone post a blog or send me a link which tells me how to configure BPM on IR &ID ,its very basics and also explain the various steps such as send/recieve and fork etc... and their meanings

there are multiple blogs and link have posted in above posts.

Better to start with basic scenarios in BPM to accustom with it

/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM

/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM

https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM

thanks

Swarup

[Former Member]

Hi,

Refer these links for various steps avaiable in BPM:

http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm

Fork:

http://help.sap.com/saphelp_nw04/helpdata/en/24/e2283f2bbad036e10000000a114084/content.htm

Example from SAP:

Examples and Usage Cases

http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm

Tutorial: Defining an integration process

http://help.sap.com/saphelp_nw04/helpdata/en/69/4ad13fa69a4921e10000000a1550b0/content.htm

Regards,

Nithiyanandam

[former_member859847]

Hi,

BPM means Business process management.

Is it necessary to be used BPM,we need to have multiple senders and recievers?

not required, with out BPM also we can do.

Message: BPM in XI

https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/integrationProcess%28ccBPM%29inXI&

BPM-1

/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm

BPM-2

/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm

BPM-3

/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit

BPM-4

/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm

Schedule BPM

/people/siva.maranani/blog/2005/05/22/schedule-your-bpm

Use of Synch - Asynch bridge in ccBPM

/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi

Use of Synch - Asynch bridge in ccBPM

https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]

without BPM

/people/henrique.pinto/blog/2007/08/02/syncasync-scenarios-without-bpm

without BPM1

/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19

IDOC BPM

/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm

multimapping without BPM

/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

These links will u with BPM , will have screenshots also

Regards

mahesh.

[Former Member]

Hi,

Please gothrough this Disscussion had earlier

Regards

Seshagiri

[Former Member]

Hi,

Check this links.

/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm

/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers

/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit

/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi

/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps

/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure

https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c...

https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37be...

/people/prasadbabu.nemalikanti3/blog/2006/03/10/bpmsingle-sender-and-multiple-receivers-based-on-synchronous-exchangeswitch-part-1

/people/daniel.graversen/blog/2006/09/07/using-a-bpm-to-collect-messages-for-a-set-interval-of-time

Regards,

Phani