saprouter issue unable to logon to the server

[Former Member]

Hi Guys,

I am getting an error in my saprouter. When i m trying to start a telenet session from SAP marketplace i am getting the following error

The following is the exact error:

The remote function call library returend the following error message:

SAPCMINIT3: rc=20 > Connect to SAP Gateway Failed

Connect_PM DEST=o01, GWHOST =/H/myappservername/S/3299/194.117.106.129/S/3299/H/oss001, GWSERV=sapgw01, SYSNR=01

LOCATION saprouter on myapp server name

ERROR timeout occured

[Former Member]

Hi Irshad,

The error says the router is not started,First start the router and then try opening the connection.And also ask you network team to open all the port in the internal firewall.

Reward points if helpfull.

Regards,

Vamshi.

[Former Member]

the following is the log file for saprouter_trace.log

I think there is some problem here as it is not gettig conencted to the server

Fri Feb 15 10:23:49 2008 INIT_LOGFILE

Fri Feb 15 10:23:49 2008 READ ROUTTAB /sapmnt/DEV/exe/saprouttab o.k.

Fri Feb 15 10:24:49 2008 CONNECT FROM C0, host 127.0.0.1 (loopback)

Fri Feb 15 10:24:49 2008 SEND INFO TO C0

Fri Feb 15 10:24:49 2008 DISCONNECT C0, host 127.0.0.1 (loopback)

Fri Feb 15 14:54:20 2008 CONNECT FROM C0, host 127.0.0.1 (loopback)

Fri Feb 15 14:54:20 2008 DISCONNECT C0, host 127.0.0.1 (loopback)

Fri Feb 15 14:54:20 2008 SHUTDOWN

the host is localhost i think there is some problem here. Can u guys do sopme further research

[Former Member]

can anybody tell me how to change the saproutttab file for my current conf

P * * *

P * * telnet

P * * 23

this is my current file

and i think this is creating a problem can u guys give me an example

my server IP add is 192168.64.105 ( this is where saprouter is present)

im using sapserv1 ( 194.117.106.129)

I want to access the following IP addresses

192.168.64.135

192.168.64.137

192.168.64.139

Please help me in this case

thank u

[Former Member]

Hi Irshad,

If you are using the SNC Router the make the following entrie in the routab.IF your router is already running the you have to just change the routtab and then re run the router by

saprouter -n.

#Outbound Connections to sapserv1 will use SNC

KT "p:CN=sapserv1, OU=SAProuter, O=SAP, C=DE" <serv1 ip>*

#Inbound Connection MUST use SNC

KP "p:CN=sapserv1, OU=SAProuter, O=SAP, C=DE" <public ip of your router host> 3201

KP "p:CN=sapserv1, OU=SAProuter, O=SAP, C=DE" <public ip of your router host> 3389

KP "p:CN=sapserv1, OU=SAProuter, O=SAP, C=DE" <local ip> 3201

KP "p:CN=sapserv1, OU=SAProuter, O=SAP, C=DE" <local ip> 3389

KP "p:CN=sapserv1, OU=SAProuter, O=SAP, C=DE" <local ip> 5631

KP "p:CN=sapserv1, OU=SAProuter, O=SAP, C=DE" <local ip> 5632

#Permission entries to check if the connection is allowed at all

P sapserv1 <local ip of the system you want to connect> 3201

P sapserv1 <public ip of the router system registered with SAP> 3201

P * sapserv1 3299

P * <local ip> 3201

in the similar way enter all the systems ip you want to connect

P * * *

In the similar fashion you have to just mention all the systems which you want to be connected using the router.

Reward points if helpfull.

Regards,

Vamshi.

[Former Member]

Even if at you it is registered in saproutertab * * * * by all of you equally should to open access on port 23 especial for telnet connection.

In saproutertab for exemple

P <IP Address SAP-SR> <IP Server> 23

Thaks and regards .

Award is helpful.

Sergo Beradze.

Edited by: Sergo Beradze on Feb 16, 2008 11:20 AM

Edited by: Sergo Beradze on Feb 16, 2008 11:35 AM