ALE configuration

[kavitha_rambabu]

hi

what are the ALE configurations required to be done in R/3 and XI for Outbound and inbound

[Former Member]

Hi,

check this blog,

/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi

also refer this

https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6f...

Regards,

Nithiyanandam

[Former Member]

Hi,

Try this

/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi

Regards

Seshagiri

[Former Member]

Hi

for IDOC TO FILE,

ALE SETTINGS TO POST IDOC OUT OF SAP R/3

We need to do the following settings in XI

1) Create an RFC Destination to the Sending System in transaction code (SM59)

a) Choose create

b) Specify the name of the RFC destination

c) Select connection type as 3 and save

d) In the technical settings tab enter the details SAP SID/URL and system number#

e) Enter the Gateway host as same details above SID/URL

f) Gateway service is 3300+system number#

g) In the Logon /Security tab, enter the client user & Password details of Destination system

h) Test the connection and remote logon.Both should be succesful

****************************************************************

2) Create Port Using Transaction Code IDX1

**************************************************************

a) Select create new button

b) Enter the port name as SAP+SID (The starting char should be SAP)

c) Enter the destination client

d) Enter the RFC Destination created in SAP R/3 towards other system

e) Save

*********************************************************************

3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)

**********************************************************************

a) Create new

b) IDOC Message Type

c) Enter port created in IDX1

**********************************************************************************************************************

SETTINGS IN SAP R/3

***********************************************************************************************************************

We need to do the following settings in R/3

Logon to Sap R/3 System

**********************************************************************

1) Create an RFC Destination to XI in transaction code (SM59)

***********************************************************************

a) Choose create

b) Specify the name of the RFC destination

c) Select connection type as 3 and save

d) In the technical settings tab enter the details SAP SID/URL and system number#

e) Enter the Gateway host as same details above SID/URL

f) Gateway service is 3300+system number#

g) In the Logon /Security tab, enter the client user & Password details of Destination system

h) Test the connection and remote logon.Both must be succesful

***********************************************************************

2) Create communication Port for Idoc processing Using Transaction(We21)

***********************************************************************

a) First Select Transactional RFC and then click create button

b) Enter the destination port name as SAP+SID (The starting char should be SAP)

d) Enter the RFC Destination created in SAP R/3 towards other system.

e) Save

***********************************************************************

3) Create Partner Profile with Outbound Parameters (WE20)

***********************************************************************

a) Create New

b) Create the Partner no. name as same the logical system name of the destination system

c) Select Partner type LS

d) Enter details for Type: US/USER, Agent, and Lang

Then Save

e) Select Partner no. and LS which were create above

f) Now we have to give some Outbound Parameters.So click on ADD TO Create Outbound Parameter

g) Select Message type

h) Double click on Message Type and Then Enter the details for Receiving port, Pack size=1 and Basic type

I) save

*****************************************

4) In Transaction SALE, Create Logical System

*******************************************

a). Go to Basic Settings-> First Define logical systems

and then assign logical systems

b) Double click on Define the logical systems

c) Give data for your Logicaal System and Name

d) Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready

e) Assign the logical system name to the client

*******************************************************************

5) Create Customer Distribution model in the transaction code BD64

******************************************************************

1) Click on the Create modal View button and enter the short text, Technical name etc as shown below

2) Now select the created model view and click on Add message type button .A pop up box appears, enter Sending system, receiving system and message type

3) Save the Distribution model

Generate Partner Profiles

Click on Menu Item ‘Generate Partner Profiles’

It leads to the next transaction where in the selection screen you have to provide Model view name, Partner System logical system and execute

Then, you will be intimated about the partners, port creation, and outbound parameters creation

4) Distribute Customer Distribution Model

In the menu item GO to Edit->Modal View-> ‘Distribute’ to the destination client

Popup window appears ,press Enter

You will be intimated about the the Modal View Distributed

AND

FOR FILE TO IDOC

ALE SETTINGS TO POST IDOC INTO SAP R/3

We need to do the following settings in XI

1) Create an RFC Destination to the Receiving System in transaction code (SM59)

a) Choose create

b) Specify the name of the RFC destination

c) Select connection type as 3 and save

d) In the technical settings tab enter the details SAP SID/URL and system number#

e) Enter the Gateway host as same details above SID/URL

f) Gateway service is 3300+system number#

g) In the Logon /Security tab, enter the client, user & Password details of Destination system

h) Test the connection and remote logon.Both should be succesful

****************************************************************

2) Create Port Using Transaction Code IDX1

**************************************************************

a) Select Create New button

b) Enter the port name as SAP+SID (The starting char should be SAP)

c) Enter the destination client

d) Enter the RFC Destination created in XI towards R/3

e) Save

*********************************************************************

3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)

**********************************************************************

a) Create new

b) IDOC Message Type

c) Enter port created in IDX1

**********************************************************************************************************************

SETTINGS IN SAP R/3

***********************************************************************************************************************

We need to do the following settings in R/3

Logon to Sap R/3 System

**********************************************************************

1) Create an RFC Destination to XI in transaction code (SM59)

***********************************************************************

a) Choose create

b) Specify the name of the RFC destination

c) Select connection type as 3 and save

d) In the technical settings tab enter the details SAP SID/URL and system number#

e) Enter the Gateway host as same details above SID/URL

f) Gateway service is 3300+system number#

g) In the Logon /Security tab, enter the client, user & Password details of Destination system

h) Test the connection and remote logon.Both must be succesful

***********************************************************************

2) Create communication Port for Idoc processing Using Transaction(We21)

***********************************************************************

a) First Select Transactional RFC and then click create button

b) Enter the destination port name as SAP+SID (The starting char should be SAP)

d) Enter the RFC Destination created in SAP R/3 towards other system.

e) Save

***********************************************************************

3) Create Partner Profile with Inbound Parameters (WE20)

***********************************************************************

a) Create New

b) Create the Partner no. name as same the logical system name of the destination system

c) Select Partner type LS

d) Enter details for Type: US/USER, Agent, and Lang

Then Save

e) Select Partner no. and LS which were create above

f) Now we have to give some Inbound Parameters.So click on ADD TO Create Inbound Parameter

g) Select Message type

h) Double click on Message Type and Then Enter the details for Message Type and Process Code.

I) save

*******************************************

4) In Transaction SALE, Create Logical System

*******************************************

a). Go to Basic Settings-> First Define logical systems

and then assign logical systems

b) Double click on Define the logical systems

c) Give data for your Logicaal System and Name

d) Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready

e) Assign the logical system name to the client

PLZ REWARDS POINTS

VIKAS

[Former Member]

SAP R/3

R/3 to XI

1) RFC Destination (SM59)

a) Choose create.

b) Specify the name of the RFC destination

c) Select connection type as 3 and save

d) In the technical settings tab enter the details SAP SID/URL and system number#.

e) Enter the Gateway host as same details above SID/URL.

f) Gateway service is 3300+system number#.

g) In the Logon /Security tab, enter the client user & Password details of Destination system.

h) Test the connection and remote logon.

2) Create Port (We21)

a) First Select Transactional RFC and then click create button

b) Enter the destination port name as SAP+SID (The starting char should be SAP)

c) Enter the destination client.

d) Enter the RFC Destination created in SAP R/3 towards other system.

e) Save

3) Create Partner Profile (WE20)

a) Create New

b) Create the Partner no. name as same the logical system name of the destination system.

c) Select Partner type LS

d) Enter details for Type: US/USER, Agent, and Lang.

e) Click on the + button to select the message type.

f) Select Partner no. and LS which ever create above.

g) Select Message type

h) Select Process code related to the Message type.

I) save.

4)Maintain Distribution Model (BD64):

XI to R/3

1) RFC Destination (SM59)

a) Choose create.

b) Specify the name of the RFC destination

c) Select connection type as 3 and save

d) In the technical settings tab enter the details SAP SID/URL and system number#.

e) Enter the Gateway host as same details above SID/URL.

f) Gateway service is 3300+system number#.

g) In the Logon /Security tab, enter the client user & Password details of Destination system.

h) Test the connection and remote logon.

2) Create Port (IDX1) ( Create port to get IDOC Meta data from sender system)

a) Select create new button

b) Enter the port name as SAP+SID (The starting char should be SAP)

c) Enter the destination client.

d) Enter the RFC Destination created in SAP R/3 towards other system.

e) Save

3) Load Meta Data for IDOC (IDX2) (To maintain IDOC Metadata, it is needed by XI because XI needs to construct IDOC-XML from IDOC. It is not needed by any sap system).

a) Create new

b) IDOC Message Type

c) Enter port created in IDX1.

Edited by: Ashok Reddy Thatigutla on Feb 14, 2008 10:21 AM

[Former Member]

Hi Kavitha,

Pre-requisites for Inbound IDoc to R/3 from PI:

Configuration required at Xi side:

Go to IDX1: configure the port.

Go to IDX2: load the DOC metadata.

Go to SM59: Create RFC destination which points to R3 system this is require in the case where your IDOC is sent to R 3 system,

Configiration required at R3 side:

Maintain Logical System for PI (SALE transaction):

Maintain Partner Profile for XI system(WE20):

Pre-requisites for Outbound IDoc from R/3 to PI:

Configurations required in R/3:

Maintain Logical System (SALE)

Define RFC Destination (SM59) which points to PI system

Maintain Port (WE21)

Maintain partner profile. (WE20):

Maintain Distribution Model (BD64):

ALE configuration for pushing idocs from SAP to XI

/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi

IDOC testing using WE19

/people/sameer.shadab/blog/2005/07/25/reposting-idocs-instead-of-recreating--for-testing-purpose-xi

File To IDOC - Part1 (SLD and Design):

https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&

File To IDOC - Part2 (Configuration):

https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&

File To IDOC - Part3 (Steps required in XI and R3):

https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&

Thnx

Chirag

[Former Member]

Hi,

For File to IDOC,

in R/3

1.create rfc connection using sm59

2.create Logical sys using bd54

3.create port using we21

4.create partner profile using we20

in xi

1.create rfc connection using sm59

2.create Logical sys using bd54

3.create port using IDX!

for IDOC to FIle

R/3 side

1.create rfc connection using sm59

2.create Logical sys using bd54

3.create port using we21

4.create partner profile using we20

5.distribute busynessmodel using bd64

1.create rfc connection using sm59

2.create Logical sys using bd54

3.create port using IDX!

4.create partner profile using we20

Plz award points

thanq