Use of Inspection Type -09 & 02 & 12

[Former Member]

Hi all

Please give the usage for follwing inspection types.

09-Recurring Inspection

02- Goods Issue

12- General Delivery.

Regards

sandeep

[Former Member]

Sandip,

This is quite simple. Please follow the below steps.

1. In the routing for the material, goto the header details and here you can find the "parameters for dynamic modification/inspection points".

2. Select the Inspn points as 100 and partial lot assignment as "Partial lot and batch for each inspection point"

3. Goto the operation and select the operation and select the Details->operation.

4. here you can find the section "Quality management:inspeciton point"

5. Select the appropriate insp point completion and select the Qty-related and enter the qty and units. For ex if you want to have the results for every 2000 mts, then enter the qty as 2000 and unit of measurement a mts.

This will trigger your requirements.

Hope this helps and if helpful pl reward the points.

Prakash

[Former Member]

09-Recurring Inspection - This is used when you have to inspect the batch material as per the interval..letb us say you did a GR for batch X and material is such a matreial it has to be inspected every 3 months...then if you set up this insp type and enter the inspection interval in material master, then system will create a inspection lot and you can reject or acccept this batch.

02- Goods Issue - whenever if you want to inspect the material duing issue(to production order), system will create a inpsection lot and you can inspect the material then if good you can use in the production

12- General Delivery- soem times customer wants to inspection, then you activate this, then system will create a inspection lot when you create SO delivery.

i hope you got it..or else come back

[Former Member]

Dear rajesh

We have scenario in our processing Department in Textile Industry,basiscally they want to enter results for some Quality parameters for semifinished fabric at last operation with inspection type-03( inprocess inspection)

But presently if production order is created for 20000mts & suppose 1st batch of 4000mts which user confirms production for first time a warning message will get displayed for Quality results for the inspection lot,& second time when he confirms new batch of 5000mts again system does not stop for entering quality results,It allows to directly confirm

We want basically every time for different bathches or jobcards the process quality dept has to enter in process quality results & no posting of stock,we want only results to be keyed in.

how to do this & where is customisation setting in spro.

to make this message as warning message for every batch.

Thanks

sandeep patil

[Former Member]

Hi,

For inspection type 02, whenever you issue the goods for any reason, system will creat inspection lot.