on 12-10-2007 2:23 AM
Hi All,
I would like to use the Sales Information System (Info structure - s001 to s006) to carry out sales analysis. What are the customization settings i need to do. For one sales organization, i am able to carry out the analysis, but for the other sales org. the system prompts a message saying 'no data exists'. I know i need to make some customization settings for this sales org. before i begin to use it, but not sure where.
Hope my problem is clear, await inputs.
Vivek
dear vivek
1: IMG menu path for SIS configuration steps
Task 1: Create Self-Defined Information Structure
Use transaction code MC21 (menu path Logistics Data Warehouse>Data Basis>Information Structures>Maintain self-defined information structures> Create) to create a Self-Defined Information Structure. Give a customer-range number 990 (any available number between 501 and 999). To make it easier, use copy from to copy structure from S001.
Figure 2: Create a Self-Defined Info Structure
Figure 3: Structure S990 is created as a copy of S001
Structure S990 is created as a copy of S001. Accordingly, you will see defaulted characteristics and key figures. Review various settings (unit, sum, etc.).
Add two more characteristics: Sales Order Number and Item Number.
Click on Choose Characteristics Icon and then click on Selection List icon to choose fields from field catalogs.
Choose field catalog SD: Bus transaction (order) by double-clicking it. Double-click on Sales Document and Sales document item from field catalog fields (you may need to scroll-down).
Figure 4: Choose fields Sales Document and Sales Document Item from Field Catalog
You can view technical names by toggling the Switch Display icon.
Figure 5: Switch display to view technical names
Make sure that you have selected correct characteristics as: MCVBAK-VBELN and MCVBAP-POSNR.
Click on Copy + Close icon and then click on Copy icon to accept the changes.
Review information
Double-click on characteristics and key figures to review technical information. This step is not mandatory, just for information.
Figure 6: Review technical field information for characteristics: Customer (KUNNR), Sales Order (VBELN), Item (POSNR) and Key figures: Incoming Order (AENETWR), Open Order (OAUWE)
System displays the generation log.
Figure 7: Generation log for Structure S990. Table S990E is Structural Information for Table S990
Task 2: Maintain Update Groups
SIS IMG>Logistics Data Warehouse>Updating>Updating Definition>General Definition Using Update Groups>Maintain Update Groups
Figure 8: Update Groups for Sales and Distribution
No new entries need to be created. You can use the existing system-delivered update groups. Use Update Group (UpdGrp) 1 for the standard order process of: SIS: Sales Document, Delivery, Billing Document and use UpdGrp 2 for the SIS: Returns, Returns Delivery, Credit Memo.
Task 3: Maintain Update Rules
SIS IMG>Logistics Data Warehouse>Updating>Updating Definition>Specific definition using Update Rules>Maintain Update Rules>Display
Info Structure S001 and Update Group 1.
Before we create update rules for S990, let's review how update rules are defined for S001. Review rules for Characteristics and key figures.
Figure 9: Update Rules for combination of Structure S001 and Update Group 1
Double-click to review specific details of the update rule for Key Figure Incoming Orders. Note that the event is VA Sales Order creation.
Figure 10: Update rules for Key Figure Incoming Orders
Figure 11: Characteristics for Incoming Orders
Similarly review details of Key Figure Sales. Note that the Invoiced Amount (Sales Amount) is updated by event VD Billing Document.
Figure 11: Update rules for Key Figure Sales
Figure 12: Characteristics for Sales
Similar to Update Rules of S001, we need to create Update Rules for our Self-Defined Structure S990.
SIS IMG>Logistics Data Warehouse>Updating>Updating Definition>Specific definition using Update Rules>Maintain Update Rules>Create (transaction code MC24). To make it easier, use copy from to copy update rules from S001.
Figure 13: Create Update Rules for Structure S990
Please make sure the Source information is properly updated for all the characteristics. Since you copied the rules, the sales order and item rules are defaulted too. Make sure appropriate changes are made for events VC (delivery) and VD (Invoice).
Figure 14: Source Characteristics for Sales Document and Item
Since we copied the Update Rules, the source field and table information is also copied. We need to change appropriately to make sure correct source information is populated. Click on Rules for charact and verify source information for every key figure, by clicking on previous key figure and next key figure.
Figure 15: For Event VD Billing Document, Sales Document and Item are present in MCVBRP table
Figure 16: For Event VC Shipping, Sales Document and Item are present in MCLIPS table
Figure 17: Maintain Update Rules for Structure S990 and Update Group
Task 4: Maintain Statistics Groups
Maintain Statistics Groups
Maintain Statistics Groups for Customers, Materials, SD Document Types etc. Most of the pre-defined settings are enough. Make sure that settings are updated for customized objects too, e.g., SD document types for your organizations.
Also, make sure that the customer (sales view) and material Master records are updated with appropriate Statistics Groups.
Figure 18: Maintain and assign statistics groups. IMG path: Updating> Updating Control> Settings: Sales> Statistics Groups
- Maintain Statistics Groups for Customers (OVRA)
Figure 19: Statistics Groups for Customers
- Maintain Statistics Groups for Material (OVRF)
Figure 20: Statistics Groups for Materials
- Maintain Statistics Groups for Sales Document
Figure 21: Statistics Groups for Sales Documents
- Assign Statistics Groups for relevant Sales Document Type
Figure 22: Assign Statistics Groups to relevant Sales Documents
Assign Statistics Groups for each Sales Document Item Type
Figure 23: Assign Statistics Groups to relevant Item Categories
-Assign Statistics Groups to each Delivery Type
Figure 24: Assign Statistics Groups to relevant Delivery Types
-Assign Statistics Groups to each Delivery Item Type
Figure 25: Assign Statistics Groups to relevant Delivery Item Categories
- Determine Billing Document Types Relevant to Statistics
Figure 26: Assign Statistics Groups to relevant Billing Types
Note: As mentioned earlier, most of the settings are already set in standard system. Make sure that customized objects specific to your company are also updated appropriately.
- Update Customer Master for Statistics Relevancy
Transaction Code XD02 (Sales view, field Cust stats.Grp)
Figure 27: Assign Statistics Groups to Customer Master Records (Sales view)
- Update Material for Statistics Relevancy
Transaction Code MM02 (Sales 2 view, field Matl statistics grp)
Figure 28: Assign Statistics Groups to Material Master Records (Sales view)
Task 5: Assign Update Groups to Header and Item Levels
Assign Update Groups on Header and Item levels
For combinations of Sales Area (Sales Org, Distribution Channel, Division), assign Update groups (transaction codes OVRO and OVRP).
SIS IMG>Logistics Data Warehouse>Updating>Updating Control>Settings: Sales>Update Group
- Update Groups at Item Level
Figure 29: Update Groups at Item Level
Figure 30: Update Groups at Item Level - details
- Update Groups at Header Level
Figure 31: Update Groups at Header Level
Figure 32: Update Groups at Header Level - details.
Task 6: Activate LIS Update
Lastly, Activate LIS Update for the Structure (transaction code OMO1)
SIS IMG path: Logistics Data Warehouse>Updating>Updating Control>Activate Update>Choose Activity as Sales and Distribution.
Let's update our LIS structure S990 with period as Month and update option of Asynchronous Updating (2).
Figure 33: Activate LIS Update for S990
Finally u go through t.code MCSI, select ur info structure. Then execute the LIS report.
rewards if it helps
siva
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Standard SAP SD Reports:=
Statistic Group:
Purpose To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Some of the Standard reports in SD are:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Mr. Kishore,
Thank you very much for that clear explanation. I have followed the steps as mentioned by you for the customization, but i am unclear about the step 5 (Assign Statistics Groups for each Sales Document Item Type).
I know the sales document type used for the sales organization, so i have done the assignment upto step 4. Can you please briefly explain what is document item type & how i can find the document item type associated with the sales org. for which i want to use the SIS, so i can complete the customizing.
Hope my problem is clear, await your inputs.
Vivek
User | Count |
---|---|
110 | |
12 | |
11 | |
6 | |
5 | |
4 | |
4 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.