Solved: URGENT: REGARDING POSTING DATE AND DELETION OF ZER...

Former Member · ‎12-01-2007

Hi,

I had made a report in which i have to display 'POSTING DATE' (iseg-budat) when we execute the report i.e. it should be displayed as PERIOD :- _______ to _______ .

2nd problem is i had displayed the material no. ,but there are zeros which are displaying in dere ,i want to remove dem ... example, if the mat.no. is 2321 ,it is displaying 000002321. i want to remove these zeros.

Its request to all of u dat plz help me as fast as possible as it is most urgent to me and if any body provide me help he or sh e will be definately rewarded..

Regards,

ric.s

krishnannarayanan_nampoot · ‎12-01-2007

Hi ,

I guess u r missing out the No_zero field in the fieldcatalog...When u build the fieldcatalog, pass 'X' to the field 'NO_ZERO'..this will take off the leading Zeros....its the way of doing although as mentioned u can use Conversion Exit..but it need loop on table and then modify each entry ..

Use the NO_ZERO in the field catalog..

Do reward points if this works out for you

Posting date i'll chek up & reply ...

Regards,

Former Member · ‎12-01-2007

The function Module 'CONVERSION_EXIT_ALPHA_OUTPUT' is used to remove the leading zeros in a field.

the following is a sample code which i have used for 'Commitment item' in my report. replace the field with your required field i.e. MATNR.

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = IT_FMIT1-RFIPEX

IMPORTING

OUTPUT = IT_FMIT1-RFIPEX.

Rewards if useful.

Former Member · ‎12-01-2007

hi,

but where should i WRITE THIS function? i had used dis function right after call function 'REUSE_ALV_GRID_DISPLAY' but it has no effect on it... will u tell me plzzz,definately reward u with points..

regards,

ric.s

Former Member · ‎12-01-2007

You have to call this function before you pass the field to the ALV. Before you pass the table to the Function Module 'REUSE_ALV_GRID_DISPLAY' while filling up the internal field catalog table you have to pass the earlier function and process the ALV.

Former Member · ‎12-01-2007

HI SRAVAN,

I had tried it by writeing it before ' perform set_fieldcat2 using:' but it has no effcet on it ,it still shows the leading zeros ,can u plz privide me dummy example of it that where to place it,i will be thankful to you.

Former Member · ‎12-01-2007

Here i am giving you one of the ALV reports i have generated. Check this program. I hope it will be helpful to you.

REPORT ZFI_ASSIGNED_FUNDS_FINAL.

TABLES: FMIT,FMCIT,FPOS,IFMEISA1,FMFCTRT,BSEG,ZREV_BUDGET.

TYPE-POOLS: SLIS.

*ALV data declarations

DATA: FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,

GD_SORT TYPE SLIS_T_SORTINFO_ALV WITH HEADER LINE,

GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,

GD_LAYOUT TYPE SLIS_LAYOUT_ALV,

GD_REPID LIKE SY-REPID.

*For ALV top of page

DATA : IT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.

*For ALV Events

DATA : IT_EVENT1 TYPE SLIS_T_EVENT.

*For ALV Events

DATA : IT_EVENT TYPE SLIS_ALV_EVENT.

*For top of page heading

DATA: IT_LINE TYPE SLIS_LISTHEADER.

SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.

PARAMETER : RADIO RADIOBUTTON GROUP R1.

IF RADIO EQ 'X'.

SELECT-OPTIONS: FIPEX FOR FPOS-FIPEX, " SELECTION FOR FUNDS CENTER & COMMITMENT ITEM

RFISTL FOR FMIT-RFISTL.

ENDIF.

PARAMETER: RADIO1 RADIOBUTTON GROUP R1.

IF RADIO1 EQ 'X'.

SELECT-OPTIONS : HKONT FOR BSEG-HKONT, " SELECTION FOR COST CENTER & G/L ACCOUNT

KOSTL FOR ZREV_BUDGET-KOSTL.

ENDIF.

SELECTION-SCREEN END OF BLOCK B1.

SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.

SELECT-OPTIONS: PERDE FOR IFMEISA1-PERDE DEFAULT '01' TO '12' OBLIGATORY.

PARAMETER : RYEAR LIKE FMIT-RYEAR OBLIGATORY.

SELECTION-SCREEN END OF BLOCK B2.

DATA: BEGIN OF IT_TAB OCCURS 0,

FIKRS LIKE FMFCTR-FIKRS,

FICTR LIKE CSKS-KOSTL,

CTR_OBJNR LIKE FMFCTR-CTR_OBJNR,

RFISTL LIKE FMIT-RFISTL,

OBJNR LIKE BPPE-OBJNR,

END OF IT_TAB.

DATA: BEGIN OF IT_TAB1 OCCURS 0,

CO_OBJNR LIKE BPIJ-CO_OBJNR,

POSIT LIKE BPPE-POSIT,

FIPEX LIKE FMPOSIT-FIPEX,

FICTR LIKE FMFCTR-FICTR,

KSTAR LIKE COSP-KSTAR,

RFISTL LIKE FMIT-RFISTL,

OBJNR1 LIKE BPPE-OBJNR,

END OF IT_TAB1.

DATA: BEGIN OF IT_FMIT OCCURS 0,

RYEAR LIKE FMIT-RYEAR,

FIKRS LIKE FMIT-FIKRS,

RFISTL LIKE ZREV_BUDGET-KOSTL,

RFIPEX LIKE ZREV_BUDGET-KSTAR,

HSL01 LIKE FMIT-HSL01,

HSL02 LIKE FMIT-HSL02,

HSL03 LIKE FMIT-HSL03,

HSL04 LIKE FMIT-HSL04,

HSL05 LIKE FMIT-HSL05,

HSL06 LIKE FMIT-HSL06,

HSL07 LIKE FMIT-HSL07,

HSL08 LIKE FMIT-HSL08,

HSL09 LIKE FMIT-HSL09,

HSL10 LIKE FMIT-HSL10,

HSL11 LIKE FMIT-HSL11,

HSL12 LIKE FMIT-HSL12,

HSL13 LIKE FMIT-HSL13,

HSL14 LIKE FMIT-HSL14,

HSL15 LIKE FMIT-HSL15,

HSL16 LIKE FMIT-HSL16,

END OF IT_FMIT.

DATA: BEGIN OF IT_FMIT1 OCCURS 0,

RYEAR LIKE FMIT-RYEAR,

FIKRS LIKE FMIT-FIKRS,

RFISTL LIKE ZREV_BUDGET-KOSTL,

RFIPEX LIKE FMPG-FIPEX,

TOTAL LIKE FMIT-TSL01,

TOTAL1 LIKE FMIT-TSL01,

OBJNR LIKE BPPE-OBJNR,

POSIT LIKE BPPE-POSIT,

END OF IT_FMIT1.

DATA: BEGIN OF IT_BPPE OCCURS 0,

OBJNR LIKE BPPE-OBJNR,

POSIT LIKE BPPE-POSIT,

GJAHR LIKE BPPE-GJAHR,

WLP01 LIKE BPPE-WLP01,

WLP02 LIKE BPPE-WLP02,

WLP03 LIKE BPPE-WLP03,

WLP04 LIKE BPPE-WLP04,

WLP05 LIKE BPPE-WLP05,

WLP06 LIKE BPPE-WLP06,

WLP07 LIKE BPPE-WLP07,

WLP08 LIKE BPPE-WLP08,

WLP09 LIKE BPPE-WLP09,

WLP10 LIKE BPPE-WLP10,

WLP11 LIKE BPPE-WLP11,

WLP12 LIKE BPPE-WLP12,

END OF IT_BPPE.

DATA: BEGIN OF IT_BPPE1 OCCURS 0,

OBJNR LIKE BPPE-OBJNR,

POSIT LIKE BPPE-POSIT,

GJAHR LIKE BPPE-GJAHR,

RFISTL LIKE FMIT-RFISTL,

FIPEX LIKE FPOS-FIPEX,

TOTAL2 LIKE BPPE-WLP01,

END OF IT_BPPE1.

DATA: BEGIN OF IT_CSKS OCCURS 0,

KOKRS LIKE CSKS-KOKRS,

KOSTL LIKE CSKS-KOSTL,

BUKRS LIKE CSKS-BUKRS,

OBJNR LIKE CSKS-OBJNR,

END OF IT_CSKS.

DATA: BEGIN OF IT_COSP OCCURS 0,

OBJNR LIKE COSP-OBJNR,

GJAHR LIKE COSP-GJAHR,

KSTAR LIKE COSP-KSTAR,

BEKNZ LIKE COSP-BEKNZ,

WKG001 LIKE COSP-WKG001,

WKG002 LIKE COSP-WKG002,

WKG003 LIKE COSP-WKG003,

WKG004 LIKE COSP-WKG004,

WKG005 LIKE COSP-WKG005,

WKG006 LIKE COSP-WKG006,

WKG007 LIKE COSP-WKG007,

WKG008 LIKE COSP-WKG008,

WKG009 LIKE COSP-WKG009,

WKG010 LIKE COSP-WKG010,

WKG011 LIKE COSP-WKG011,

WKG012 LIKE COSP-WKG012,

END OF IT_COSP.

DATA: BEGIN OF IT_COSP2 OCCURS 0,

OBJNR LIKE COSP-OBJNR,

GJAHR LIKE COSP-GJAHR,

KSTAR LIKE COSP-KSTAR,

FIPEX LIKE FMPG-FIPEX,

TOTAL LIKE COSP-WKG001,

TOTAL1 LIKE COSP-WKG001,

OBJNR1 LIKE BPPE-OBJNR,

POSIT LIKE BPPE-POSIT,

END OF IT_COSP2.

IF RADIO EQ 'X'.

DATA: BEGIN OF IT_FINAL OCCURS 0,

FIKRS LIKE FMIT-FIKRS,

RFISTL LIKE FMIT-RFISTL,

RFIPEX LIKE FMIT-RFIPEX,

TEXT LIKE FMCIT-TEXT1,

ALLOC LIKE FMIT-TSL16,

USED LIKE FMIT-TSL16,

REMAIN LIKE FMIT-TSL16,

BEZEICH LIKE FMFCTRT-BEZEICH,

END OF IT_FINAL.

ENDIF.

IF RADIO1 EQ 'X'.

DATA: BEGIN OF IT_FINAL1 OCCURS 0,

GJAHR LIKE ZREV_BUDGET-GJAHR,

KOSTL LIKE ZREV_BUDGET-KOSTL,

KSTAR LIKE ZREV_BUDGET-KSTAR,

TOTAL1 LIKE COSP-WKG001,

TOTAL3 LIKE COSP-WKG001,

TEXT LIKE CSKU-KTEXT,

VARIANCE LIKE COSP-WKG001,

BEZEICH LIKE FMFCTRT-BEZEICH,

END OF IT_FINAL1.

ENDIF.

DATA: BEGIN OF IT_FISTL OCCURS 0,

RFISTL LIKE FMIT-RFISTL,

BEZEICH LIKE FMFCTRT-BEZEICH,

END OF IT_FISTL.

DATA: BEGIN OF IT_HKONT OCCURS 0,

KSTAR LIKE CSKU-KSTAR,

KTEXT LIKE CSKU-KTEXT,

END OF IT_HKONT.

DATA: PERIOD1 TYPE I,

PERIOD2 TYPE I,

PERIOD3 TYPE I,

PERIO TYPE I.

DATA: BEZEICH LIKE FMFCTRT-BEZEICH.

CONSTANTS: C_00 TYPE MONAT VALUE '00',

C_13 TYPE MONAT VALUE '13'.

DATA : IT_RETURN LIKE DDSHRETVAL OCCURS 0 WITH HEADER LINE.

DATA: FIPEX1 LIKE COSP-KSTAR.

*************************************************************************

A T - S E L E C T I O N S C R E E N

*************************************************************************

AT SELECTION-SCREEN.

LOOP AT PERDE.

IF PERDE-LOW >= C_13 OR PERDE-HIGH >= C_13 .

MESSAGE E022(ZA) WITH 'Enter Period values from 1 to 12'.

EXIT.

ENDIF.

ENDLOOP.

IF NOT PERDE-LOW IS INITIAL.

PERIOD1 = PERDE-LOW.

ENDIF.

IF NOT PERDE-HIGH IS INITIAL.

PERIOD2 = PERDE-HIGH.

PERIOD3 = PERIOD2 - PERIOD1.

PERIOD3 = PERIOD3 + 1.

ELSE.

PERIOD3 = 1.

ENDIF.

PERIO = PERIOD1.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR RFISTL-LOW.

SELECT FICTR BEZEICH INTO TABLE IT_FISTL FROM FMFCTRT

WHERE SPRAS EQ 'EN'

AND FIKRS EQ 'NFFM'.

CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'

EXPORTING

RETFIELD = 'RFISTL'

VALUE_ORG = 'S'

TABLES

VALUE_TAB = IT_FISTL

RETURN_TAB = IT_RETURN.

IF SY-SUBRC = 0.

READ TABLE IT_RETURN INDEX 1.

MOVE IT_RETURN-FIELDVAL TO RFISTL-LOW.

ENDIF.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR RFISTL-HIGH.

SELECT FICTR BEZEICH INTO TABLE IT_FISTL FROM FMFCTRT

WHERE SPRAS EQ 'EN'

AND FIKRS EQ 'NFFM'.

CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'

EXPORTING

RETFIELD = 'RFISTL'

VALUE_ORG = 'S'

TABLES

VALUE_TAB = IT_FISTL

RETURN_TAB = IT_RETURN.

IF SY-SUBRC = 0.

READ TABLE IT_RETURN INDEX 1.

MOVE IT_RETURN-FIELDVAL TO RFISTL-HIGH.

ENDIF.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR HKONT-LOW.

SELECT KSTAR KTEXT INTO TABLE IT_HKONT FROM CSKU WHERE SPRAS EQ 'EN'.

SORT IT_HKONT BY KSTAR.

CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'

EXPORTING

RETFIELD = 'HKONT'

VALUE_ORG = 'S'

TABLES

VALUE_TAB = IT_HKONT

RETURN_TAB = IT_RETURN.

IF SY-SUBRC = 0.

READ TABLE IT_RETURN INDEX 1.

MOVE IT_RETURN-FIELDVAL TO HKONT-LOW.

ENDIF.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR HKONT-HIGH.

SELECT KSTAR KTEXT INTO TABLE IT_HKONT FROM CSKU WHERE SPRAS EQ 'EN'.

SORT IT_HKONT BY KSTAR.

CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'

EXPORTING

RETFIELD = 'HKONT'

VALUE_ORG = 'S'

TABLES

VALUE_TAB = IT_HKONT

RETURN_TAB = IT_RETURN.

IF SY-SUBRC = 0.

READ TABLE IT_RETURN INDEX 1.

MOVE IT_RETURN-FIELDVAL TO HKONT-HIGH.

ENDIF.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR KOSTL-LOW.

SELECT FICTR BEZEICH INTO TABLE IT_FISTL FROM FMFCTRT

WHERE SPRAS EQ 'EN'

AND FIKRS IN KOSTL.

CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'

EXPORTING

RETFIELD = 'KOSTL'

VALUE_ORG = 'S'

TABLES

VALUE_TAB = IT_FISTL

RETURN_TAB = IT_RETURN.

IF SY-SUBRC = 0.

READ TABLE IT_RETURN INDEX 1.

MOVE IT_RETURN-FIELDVAL TO KOSTL-LOW.

ENDIF.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR KOSTL-HIGH.

SELECT FICTR BEZEICH INTO TABLE IT_FISTL FROM FMFCTRT

WHERE SPRAS EQ 'EN'

AND FIKRS IN KOSTL.

CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'

EXPORTING

RETFIELD = 'KOSTL'

VALUE_ORG = 'S'

TABLES

VALUE_TAB = IT_FISTL

RETURN_TAB = IT_RETURN.

IF SY-SUBRC = 0.

READ TABLE IT_RETURN INDEX 1.

MOVE IT_RETURN-FIELDVAL TO KOSTL-HIGH.

ENDIF.

*************************************************************************

*START-OF-SELECTION

*************************************************************************

START-OF-SELECTION.

IF RADIO EQ 'X'. " FOR FUNDS CENTER AND COMMITMENT ITEM

PERFORM GET_DATA.

PERFORM PROCESS_DATA.

ENDIF.

IF RADIO1 EQ 'X'. " FOR COST CENTER AND G/L ACCOUNT

PERFORM GET_DATA1.

PERFORM PROCESS_DATA1.

ENDIF.

*************************************************************************

*END OF SELECTION

*************************************************************************

PERFORM BUILD_LAYOUT.

PERFORM BUILD_EVENTS.

IF RADIO EQ 'X'.

PERFORM BUILD_FIELDCATALOG.

PERFORM BUILD_SORT.

PERFORM DISPLAY_ALV_REPORT.

ENDIF.

IF RADIO1 EQ 'X'.

PERFORM BUILD_FIELDCATALOG1.

PERFORM BUILD_SORT1.

PERFORM DISPLAY_ALV_REPORT1.

ENDIF.

&----

*& Form GET_DATA

&----

text

----

--> p1 text
<-- p2 text

----

FORM GET_DATA .

SELECT FIKRS FICTR CTR_OBJNR INTO TABLE IT_TAB FROM FMFCTR

WHERE FIKRS EQ 'NFFM'

AND FICTR IN RFISTL.

SELECT CO_OBJNR POSIT INTO TABLE IT_TAB1 FROM BPIJ

FOR ALL ENTRIES IN IT_TAB

WHERE CO_OBJNR EQ IT_TAB-CTR_OBJNR.

LOOP AT IT_TAB1.

SELECT SINGLE FIPEX INTO IT_TAB1-FIPEX FROM FMPOSIT WHERE FIKRS EQ 'NFFM'

AND POSIT EQ IT_TAB1-POSIT

AND FIPEX IN FIPEX.

IF SY-SUBRC EQ '0'.

MODIFY IT_TAB1.

ELSE.

DELETE IT_TAB1.

ENDIF.

ENDLOOP.

SELECT OBJNR

POSIT

GJAHR

WLP01

WLP02

WLP03

WLP04

WLP05

WLP06

WLP07

WLP08

WLP09

WLP10

WLP11

WLP12

INTO TABLE IT_BPPE

FROM BPPE

FOR ALL ENTRIES IN IT_TAB1

WHERE OBJNR EQ IT_TAB1-CO_OBJNR

AND POSIT EQ IT_TAB1-POSIT

AND GJAHR EQ RYEAR

AND VORGA IN ('KBFR','KBUE','KBUS').

LOOP AT IT_BPPE.

MOVE-CORRESPONDING IT_BPPE TO IT_BPPE1.

IT_BPPE1-RFISTL = IT_BPPE1-OBJNR+6(4).

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = IT_BPPE1-RFISTL

IMPORTING

OUTPUT = IT_BPPE1-RFISTL.

CALL FUNCTION 'FM_FIPEX_GET_FROM_POSIT'

EXPORTING

I_FIKRS = 'NFFM'

I_POSIT = IT_BPPE1-POSIT

IMPORTING

E_FIPEX = IT_BPPE1-FIPEX.

PERIOD1 = PERIO.

DO PERIOD3 TIMES.

CASE PERIOD1.

WHEN 1.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP01.

WHEN 2.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP02.

WHEN 3.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP03.

WHEN 4.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP04.

WHEN 5.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP05.

WHEN 6.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP06.

WHEN 7.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP07.

WHEN 8.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP08.

WHEN 9.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP09.

WHEN 10.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP10.

WHEN 11.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP11.

WHEN 12.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP12.

ENDCASE.

IF PERIOD2 >= PERIOD1.

PERIOD1 = PERIOD1 + 1.

ENDIF.

ENDDO.

COLLECT IT_BPPE1.

CLEAR PERIOD1.

CLEAR IT_BPPE1.

ENDLOOP.

SELECT RYEAR

FIKRS

RFISTL

RFIPEX

HSL01

HSL02

HSL03

HSL04

HSL05

HSL06

HSL07

HSL08

HSL09

HSL10

HSL11

HSL12

HSL13

HSL14

HSL15

HSL16

INTO TABLE IT_FMIT FROM FMIT

FOR ALL ENTRIES IN IT_BPPE1

WHERE RYEAR EQ RYEAR

AND FIKRS EQ 'NFFM'

AND RFIPEX EQ IT_BPPE1-FIPEX

AND RFIPEX IN FIPEX

AND RFISTL EQ IT_BPPE1-RFISTL.

LOOP AT IT_FMIT.

MOVE-CORRESPONDING IT_FMIT TO IT_FMIT1.

PERIOD1 = PERIO.

DO PERIOD3 TIMES.

CASE PERIOD1.

WHEN 1.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL01.

WHEN 2.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL02.

WHEN 3.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL03.

WHEN 4.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL04.

WHEN 5.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL05.

WHEN 6.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL06.

WHEN 7.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL07.

WHEN 8.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL08.

WHEN 9.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL09.

WHEN 10.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL10.

WHEN 11.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL11.

WHEN 12.

IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL12.

ENDCASE.

IF PERIOD2 >= PERIOD1.

PERIOD1 = PERIOD1 + 1.

ENDIF.

ENDDO.

IT_FMIT1-TOTAL1 = IT_FMIT1-TOTAL * -1 .

COLLECT IT_FMIT1.

CLEAR PERIOD1.

CLEAR IT_FMIT1.

ENDLOOP.

ENDFORM. " GET_DATA

&----

*& Form PROCESS_DATA

&----

text

----

--> p1 text
<-- p2 text

----

FORM PROCESS_DATA .

SORT IT_FMIT1 BY FIKRS RFISTL RFIPEX.

SORT IT_BPPE1 BY RFISTL FIPEX.

LOOP AT IT_BPPE1.

IT_FINAL-RFISTL = IT_BPPE1-RFISTL.

IT_FINAL-RFIPEX = IT_BPPE1-FIPEX.

IT_FINAL-ALLOC = IT_BPPE1-TOTAL2.

READ TABLE IT_FMIT1 WITH KEY RFISTL = IT_BPPE1-RFISTL RFIPEX = IT_BPPE1-FIPEX.

IF SY-SUBRC EQ 0.

IT_FINAL-USED = IT_FMIT1-TOTAL1.

ENDIF.

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = IT_FMIT1-RFIPEX

IMPORTING

OUTPUT = IT_FMIT1-RFIPEX.

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = IT_FMIT1-RFISTL

IMPORTING

OUTPUT = IT_FMIT1-RFISTL.

Changes made on 13/11/2007 *******************************

SELECT SINGLE TEXT1 INTO IT_FINAL-TEXT FROM FMCIT WHERE SPRAS EQ 'EN'
AND FIPEX EQ IT_FMIT1-RFIPEX.

SELECT SINGLE TEXT1 INTO IT_FINAL-TEXT FROM FMCIT WHERE SPRAS EQ 'EN'

AND FIPEX EQ IT_BPPE1-FIPEX.

Changes made on 13/11/2007 *******************************

SELECT SINGLE BEZEICH INTO IT_FINAL-BEZEICH FROM FMFCTRT

WHERE SPRAS EQ 'EN'

AND FICTR EQ IT_FMIT1-RFISTL.

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = IT_FINAL-RFIPEX

IMPORTING

OUTPUT = IT_FINAL-RFIPEX.

IT_FINAL-REMAIN = IT_FINAL-ALLOC - IT_FINAL-USED.

APPEND IT_FINAL.

CLEAR IT_FINAL.

ENDLOOP.

SORT IT_FINAL BY FIKRS RFISTL RFIPEX.

LOOP AT IT_FMIT1.

READ TABLE IT_FINAL WITH KEY RFISTL = IT_FMIT1-RFISTL RFIPEX = IT_FMIT1-RFIPEX.

IF SY-SUBRC NE 0.

IT_FINAL-RFISTL = IT_FMIT1-RFISTL.

IT_FINAL-RFIPEX = IT_FMIT1-RFIPEX.

IT_FINAL-USED = IT_FMIT1-TOTAL1.

IT_FINAL-ALLOC = '0'.

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = IT_FMIT1-RFIPEX

IMPORTING

OUTPUT = IT_FMIT1-RFIPEX.

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = IT_FMIT1-RFISTL

IMPORTING

OUTPUT = IT_FMIT1-RFISTL.

SELECT SINGLE TEXT1 INTO IT_FINAL-TEXT FROM FMCIT WHERE SPRAS EQ 'EN'

AND FIPEX EQ IT_FMIT1-RFIPEX.

SELECT SINGLE BEZEICH INTO IT_FINAL-BEZEICH FROM FMFCTRT

WHERE SPRAS EQ 'EN'

AND FICTR EQ IT_FMIT1-RFISTL.

IT_FINAL-REMAIN = IT_FINAL-ALLOC - IT_FINAL-USED.

APPEND IT_FINAL.

CLEAR IT_FINAL.

ELSE.

DELETE IT_FMIT1.

ENDIF.

ENDLOOP.

SORT IT_FINAL BY FIKRS RFISTL RFIPEX.

ENDFORM. " PROCESS_DATA

&----

*& Form GET_DATA1

&----

text

----

--> p1 text
<-- p2 text

----

FORM GET_DATA1 .

SELECT KOKRS KOSTL BUKRS OBJNR INTO TABLE IT_CSKS

FROM CSKS

WHERE KOKRS EQ '1000'

AND KOSTL IN KOSTL

AND BUKRS EQ 'NFCL'.

SELECT OBJNR

GJAHR

KSTAR

BEKNZ

WKG001

WKG002

WKG003

WKG004

WKG005

WKG006

WKG007

WKG008

WKG009

WKG010

WKG011

WKG012

FROM COSP

INTO TABLE IT_COSP

FOR ALL ENTRIES IN IT_CSKS

WHERE OBJNR EQ IT_CSKS-OBJNR

AND GJAHR EQ RYEAR

AND KSTAR IN HKONT.

LOOP AT IT_COSP.

MOVE-CORRESPONDING IT_COSP TO IT_COSP2.

PERIOD1 = PERIO.

DO PERIOD3 TIMES.

CASE PERIOD1.

WHEN 1.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG001.

WHEN 2.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG002.

WHEN 3.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG003.

WHEN 4.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG004.

WHEN 5.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG005.

WHEN 6.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG006.

WHEN 7.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG007.

WHEN 8.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG008.

WHEN 9.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG009.

WHEN 10.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG010.

WHEN 11.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG011.

WHEN 12.

IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG012.

ENDCASE.

IF PERIOD2 >= PERIOD1.

PERIOD1 = PERIOD1 + 1.

ENDIF.

ENDDO.

IT_COSP2-OBJNR1 = IT_COSP2-OBJNR+10(6).

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = IT_COSP2-OBJNR1

IMPORTING

OUTPUT = IT_COSP2-OBJNR1.

CONCATENATE 'FSNFFM' IT_COSP2-OBJNR1 INTO IT_COSP2-OBJNR1.

IT_COSP2-FIPEX = IT_COSP2-KSTAR.

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = IT_COSP2-FIPEX

IMPORTING

OUTPUT = IT_COSP2-FIPEX.

CALL FUNCTION 'FM_POSIT_GET_FROM_FIPEX'

EXPORTING

I_FIKRS = 'NFFM'

I_FIPEX = IT_COSP2-FIPEX

I_FLG_BUFFER_ALL =

IMPORTING

E_POSIT = IT_COSP2-POSIT

TABLES
T_FMPOSIT =

EXCEPTIONS

INPUT_ERROR = 1

DATA_NOT_FOUND = 2

OTHERS = 3

.

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

CONDENSE IT_COSP2-OBJNR1.

CONDENSE IT_COSP2-POSIT.

COLLECT IT_COSP2.

CLEAR PERIOD1.

CLEAR IT_COSP2.

ENDLOOP.

SORT IT_COSP2 BY OBJNR KSTAR.

SELECT OBJNR

POSIT

GJAHR

WLP01

WLP02

WLP03

WLP04

WLP05

WLP06

WLP07

WLP08

WLP09

WLP10

WLP11

WLP12

INTO TABLE IT_BPPE

FROM BPPE

FOR ALL ENTRIES IN IT_COSP2

WHERE OBJNR EQ IT_COSP2-OBJNR1

AND POSIT EQ IT_COSP2-POSIT

AND GJAHR EQ RYEAR

AND VORGA IN ('KBFR','KBUE','KBUS').

LOOP AT IT_BPPE.

MOVE-CORRESPONDING IT_BPPE TO IT_BPPE1.

PERIOD1 = PERIO.

DO PERIOD3 TIMES.

CASE PERIOD1.

WHEN 1.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP01.

WHEN 2.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP02.

WHEN 3.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP03.

WHEN 4.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP04.

WHEN 5.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP05.

WHEN 6.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP06.

WHEN 7.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP07.

WHEN 8.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP08.

WHEN 9.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP09.

WHEN 10.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP10.

WHEN 11.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP11.

WHEN 12.

IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP12.

ENDCASE.

IF PERIOD2 >= PERIOD1.

PERIOD1 = PERIOD1 + 1.

ENDIF.

ENDDO.

COLLECT IT_BPPE1.

CLEAR PERIOD1.

CLEAR IT_BPPE1.

ENDLOOP.

ENDFORM. " GET_DATA1

&----

*& Form PROCESS_DATA1

&----

text

----

--> p1 text
<-- p2 text

----

FORM PROCESS_DATA1 .

LOOP AT IT_COSP2.

IT_FINAL1-GJAHR = IT_COSP2-GJAHR.

IT_FINAL1-KSTAR = IT_COSP2-KSTAR.

IT_FINAL1-TOTAL1 = IT_COSP2-TOTAL.

SELECT SINGLE KOSTL FROM CSKS INTO IT_FINAL1-KOSTL WHERE KOKRS = '1000'

AND BUKRS EQ 'NFCL'

AND OBJNR = IT_COSP2-OBJNR.

READ TABLE IT_BPPE1 WITH KEY OBJNR = IT_COSP2-OBJNR1 POSIT = IT_COSP2-POSIT.

IF SY-SUBRC EQ 0.

IT_FINAL1-TOTAL3 = IT_BPPE1-TOTAL2.

ENDIF.

SELECT SINGLE KTEXT INTO IT_FINAL1-TEXT FROM CSKU WHERE SPRAS EQ 'EN'

AND KSTAR EQ IT_COSP2-KSTAR.

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = IT_FINAL1-KOSTL

IMPORTING

OUTPUT = IT_FINAL1-KOSTL.

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = IT_FINAL1-KSTAR

IMPORTING

OUTPUT = IT_FINAL1-KSTAR.

SELECT SINGLE BEZEICH INTO IT_FINAL1-BEZEICH FROM FMFCTRT

WHERE SPRAS EQ 'EN'

AND FICTR EQ IT_FINAL1-KOSTL.

IT_FINAL1-VARIANCE = IT_FINAL1-TOTAL3 - IT_FINAL1-TOTAL1.

APPEND IT_FINAL1.

CLEAR IT_FINAL1.

ENDLOOP.

SORT IT_FINAL1 BY KOSTL KSTAR.

DELETE IT_FINAL1 WHERE KOSTL IS INITIAL.

ENDFORM. " PROCESS_DATA1

&----

*& Form BUILD_FIELDCATALOG

&----

text

----

--> p1 text
<-- p2 text

----

FORM BUILD_FIELDCATALOG .

FIELDCATALOG-FIELDNAME = 'RFISTL'.

FIELDCATALOG-SELTEXT_M = 'Funds Center'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'BEZEICH'.

FIELDCATALOG-SELTEXT_M = 'Fund Center Description'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'RFIPEX'.

FIELDCATALOG-SELTEXT_M = 'Commitment Item'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'TEXT'.

FIELDCATALOG-SELTEXT_M = 'Commitment Item Description'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'ALLOC'.

FIELDCATALOG-SELTEXT_M = 'Allocated Budget'.

FIELDCATALOG-DO_SUM = 'X'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'USED'.

FIELDCATALOG-SELTEXT_M = 'Used Budget'.

FIELDCATALOG-DO_SUM = 'X'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'REMAIN'.

FIELDCATALOG-SELTEXT_M = 'Remaining Budget'.

FIELDCATALOG-DO_SUM = 'X'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

ENDFORM. " BUILD_FIELDCATALOG

&----

*& Form BUILD_FIELDCATALOG1

&----

text

----

--> p1 text
<-- p2 text

----

FORM BUILD_FIELDCATALOG1 .

FIELDCATALOG-FIELDNAME = 'KOSTL'.

FIELDCATALOG-SELTEXT_M = 'Cost Center'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'BEZEICH'.

FIELDCATALOG-SELTEXT_M = 'Cost Center Description'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'KSTAR'.

FIELDCATALOG-SELTEXT_M = 'G/L Account'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'TEXT'.

FIELDCATALOG-SELTEXT_M = 'G/L Account Description'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'TOTAL3'.

FIELDCATALOG-SELTEXT_M = 'Planned amount'.

FIELDCATALOG-DO_SUM = 'X'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'TOTAL1'.

FIELDCATALOG-SELTEXT_M = 'Actuals'.

FIELDCATALOG-DO_SUM = 'X'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

FIELDCATALOG-FIELDNAME = 'VARIANCE'.

FIELDCATALOG-SELTEXT_M = 'Variance'.

FIELDCATALOG-DO_SUM = 'X'.

APPEND FIELDCATALOG TO FIELDCATALOG.

CLEAR FIELDCATALOG.

ENDFORM. " BUILD_FIELDCATALOG1

&----

*& Form BUILD_LAYOUT

&----

text

----

--> p1 text
<-- p2 text

----

FORM BUILD_LAYOUT .

GD_LAYOUT-NO_INPUT = 'X'.

GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.

ENDFORM. " BUILD_LAYOUT

&----

*& Form BUILD_SORT

&----

text

----

--> p1 text
<-- p2 text

----

FORM BUILD_SORT .

DATA: GT_SORT TYPE SLIS_SORTINFO_ALV.

GT_SORT-UP = 'X'.

GT_SORT-FIELDNAME = 'RFISTL'.

GT_SORT-TABNAME = 'IT_FINAL'.

GT_SORT-SUBTOT = 'X'.

APPEND GT_SORT TO GD_SORT.

CLEAR GT_SORT.

GT_SORT-UP = 'X'.

GT_SORT-FIELDNAME = 'BEZEICH'.

GT_SORT-TABNAME = 'IT_FINAL'.

APPEND GT_SORT TO GD_SORT.

CLEAR GT_SORT.

ENDFORM. " BUILD_SORT

&----

*& Form BUILD_SORT1

&----

text

----

--> p1 text
<-- p2 text

----

FORM BUILD_SORT1 .

DATA: GT_SORT TYPE SLIS_SORTINFO_ALV.

GT_SORT-UP = 'X'.

GT_SORT-FIELDNAME = 'KOSTL'.

GT_SORT-TABNAME = 'IT_FINAL'.

GT_SORT-SUBTOT = 'X'.

APPEND GT_SORT TO GD_SORT.

CLEAR GT_SORT.

GT_SORT-UP = 'X'.

GT_SORT-FIELDNAME = 'BEZEICH'.

GT_SORT-TABNAME = 'IT_FINAL'.

APPEND GT_SORT TO GD_SORT.

CLEAR GT_SORT.

ENDFORM. " BUILD_SORT1

&----

*& Form BUILD_EVENTS

&----

text

----

--> p1 text
<-- p2 text

----

FORM BUILD_EVENTS .

IT_EVENT-NAME = 'TOP_OF_PAGE'.

IT_EVENT-FORM = 'TOP_OF_PAGE'.

APPEND IT_EVENT TO IT_EVENT1.

CLEAR IT_EVENT.

ENDFORM. " BUILD_EVENTS

&----

*& Form TOP_OF_PAGE

&----

ALV TOP-OF-PAGE

----

FORM TOP_OF_PAGE. "#EC CALLED

REFRESH : IT_LIST_TOP_OF_PAGE.

CLEAR : IT_LINE.

IT_LINE-TYP = 'H'.

IT_LINE-INFO = TEXT-001.

APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.

CLEAR IT_LINE.

IF RADIO EQ 'X'.

IT_LINE-TYP = 'S'.

IT_LINE-INFO = TEXT-101.

IF NOT FIPEX-LOW IS INITIAL.

CONCATENATE TEXT-101 '-' FIPEX-LOW INTO IT_LINE-INFO SEPARATED BY SPACE.

IF NOT FIPEX-HIGH IS INITIAL.

CONCATENATE TEXT-101 '-' FIPEX-LOW 'to' FIPEX-HIGH INTO IT_LINE-INFO SEPARATED BY SPACE.

ENDIF.

APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.

CLEAR IT_LINE-INFO.

IT_LINE-INFO = TEXT-102.

IF NOT RFISTL-LOW IS INITIAL.

CONCATENATE TEXT-102 '-' RFISTL-LOW INTO IT_LINE-INFO SEPARATED BY SPACE.

IF NOT RFISTL-HIGH IS INITIAL.

CONCATENATE TEXT-102 '-' RFISTL-LOW 'to' RFISTL-HIGH INTO IT_LINE-INFO SEPARATED BY SPACE.

ENDIF.

APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.

ENDIF.

IF RADIO1 EQ 'X'.

CLEAR IT_LINE-INFO.

IT_LINE-INFO = TEXT-105.

IF NOT KOSTL-LOW IS INITIAL.

CONCATENATE TEXT-105 '-' KOSTL-LOW INTO IT_LINE-INFO SEPARATED BY SPACE.

IF NOT KOSTL-HIGH IS INITIAL.

CONCATENATE TEXT-105 '-' KOSTL-LOW 'to' KOSTL-HIGH INTO IT_LINE-INFO SEPARATED BY SPACE.

ENDIF.

APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.

CLEAR IT_LINE-INFO.

IT_LINE-INFO = TEXT-106.

IF NOT HKONT-LOW IS INITIAL.

CONCATENATE TEXT-106 '-' HKONT-LOW INTO IT_LINE-INFO SEPARATED BY SPACE.

IF NOT HKONT-HIGH IS INITIAL.

CONCATENATE TEXT-106 '-' HKONT-LOW 'to' HKONT-HIGH INTO IT_LINE-INFO SEPARATED BY SPACE.

ENDIF.

APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.

ENDIF.

CLEAR IT_LINE-INFO.

IT_LINE-INFO = TEXT-103.

IF NOT PERDE-LOW IS INITIAL.

CONCATENATE TEXT-103 '-' PERDE-LOW INTO IT_LINE-INFO SEPARATED BY SPACE.

IF NOT PERDE-HIGH IS INITIAL.

CONCATENATE TEXT-103 '-' PERDE-LOW 'to' PERDE-HIGH INTO IT_LINE-INFO SEPARATED BY SPACE.

ENDIF.

APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.

CLEAR IT_LINE-INFO.

IT_LINE-INFO = TEXT-104.

IF NOT RYEAR IS INITIAL.

CONCATENATE TEXT-104 '-' RYEAR INTO IT_LINE-INFO SEPARATED BY SPACE.

ENDIF.

APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.

CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'

EXPORTING

IT_LIST_COMMENTARY = IT_LIST_TOP_OF_PAGE.

ENDFORM. "TOP_OF_PAGE

&----

*& Form DISPLAY_ALV_REPORT

&----

text

----

--> p1 text
<-- p2 text

----

FORM DISPLAY_ALV_REPORT .

GD_REPID = SY-REPID.

CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'

EXPORTING

I_CALLBACK_PROGRAM = GD_REPID

I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'

IS_LAYOUT = GD_LAYOUT

IT_EVENTS = IT_EVENT1[]

IT_FIELDCAT = FIELDCATALOG[]

IT_SORT = GD_SORT[]

TABLES

T_OUTTAB = IT_FINAL

EXCEPTIONS

PROGRAM_ERROR = 1

OTHERS = 2.

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. "DISPLAY_ALV_REPORT

&----

*& Form DISPLAY_ALV_REPORT1

&----

text

----

--> p1 text
<-- p2 text

----

FORM DISPLAY_ALV_REPORT1 .

GD_REPID = SY-REPID.

CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'

EXPORTING

I_CALLBACK_PROGRAM = GD_REPID

I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'

IS_LAYOUT = GD_LAYOUT

IT_EVENTS = IT_EVENT1[]

IT_FIELDCAT = FIELDCATALOG[]

IT_SORT = GD_SORT[]

TABLES

T_OUTTAB = IT_FINAL1

EXCEPTIONS

PROGRAM_ERROR = 1

OTHERS = 2.

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. " DISPLAY_ALV_REPORT1

Former Member · ‎12-01-2007

hi,

this my code which i making report ,now u plzz add this function bcoz i had tried to use it it is still not displaying:-

&----

*& Report ZTEST03

*&

&----

*&

&----

REPORT ZTEST03.

TABLES: ISEG,MARA.

TYPE-POOLS : SLIS.

INTERNAL TABLE FOR INVENTORY STOCK *****************

DATA: BEGIN OF ITS1 OCCURS 0,

MATNR LIKE ISEG-MATNR,

MEINS LIKE ISEG-MEINS,

MENGE LIKE ISEG-MENGE,

WRTZL LIKE ISEG-WRTZL,

BUCHM LIKE ISEG-BUCHM,

WRTBM LIKE ISEG-WRTBM,

WERKS LIKE ISEG-WERKS,

BUDAT LIKE ISEG-BUDAT,

MTART LIKE MARA-MTART,

ITEMDESC LIKE MAKT-MAKTX,

DIFFQTY LIKE ISEG-BUCHM,

DIFFVALUE LIKE ISEG-WRTBM,

END OF ITS1.

data: t_heading type slis_t_listheader.

SELECTION-SCREEN BEGIN OF BLOCK PAR1 WITH FRAME TITLE TEXT-001.

*********PARAMETERS*********

PARAMETERS : PLANT LIKE ISEG-WERKS OBLIGATORY.

*********SELECTION SCREEN OPTIONS*********

SELECT-OPTIONS : R_DATE FOR ISEG-BUDAT,

M_TYPE FOR MARA-MTART,

IT_M FOR MARA-MATNR.

*********DEFINING VARIABLES*********

SELECTION-SCREEN END OF BLOCK par1.

TOP-OF-PAGE.

PERFORM PG_HEADER.

START-OF-SELECTION.

SELECT DISTINCT A_{MATNR A}MEINS A_{MENGE A}WRTZL A_{BUCHM A}WRTBM A_{WERKS A}BUDAT B~MTART

FROM ISEG AS A INNER JOIN MARA AS B ON B_{MATNR = A}MATNR

INTO CORRESPONDING FIELDS OF TABLE ITS1 WHERE B_{MATNR = A}MATNR AND B_{MEINS = A}MEINS AND A_{WERKS = PLANT AND A}BUDAT IN R_DATE AND B_{MTART IN M_TYPE AND B}MATNR IN IT_M.

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'

EXPORTING

INPUT = ITS1-MATNR

IMPORTING

OUTPUT = ITS1-MATNR.

LOOP AT ITS1.

ITS1-DIFFQTY = ITS1-MENGE - ITS1-BUCHM.

ITS1-DIFFVALUE = ITS1-WRTZL - ITS1-WRTBM.

SELECT SINGLE MAKTX FROM MAKT INTO ITS1-ITEMDESC WHERE MATNR = ITS1-MATNR.

MODIFY ITS1.

ENDLOOP.

PERFORM PRN_SMSTOCK_ALV.

WRITING DATA FROM D TABLES**********

FORM PG_HEADER.

WRITE : 'PHYSICAL INVENTORY AUDIT REPORT PLANT : ', PLANT.

ENDFORM.

&----

*& Form PRN_SMSTOCK_ALV

&----

text

----

--> p1 text
<-- p2 text

----

form PRN_SMSTOCK_ALV .

data: w_title type lvc_title,

w_repid type syrepid,

w_comm type slis_formname,

w_status type slis_formname,

x_layout type slis_layout_alv,

t_event type slis_t_event,

t_fieldcat type slis_t_fieldcat_alv,

t_sort type slis_t_sortinfo_alv.

refresh t_fieldcat.

refresh t_event.

refresh t_sort.

clear x_layout.

clear w_title.

perform set_fieldcat2 using:

1 'MTART' 'MTART' 'MARA' '15' space 'MATERIAL TYPE' space space space space space space space space SPACE t_fieldcat 'L' 'C',

2 'MATNR' 'MATNR' 'MARA' '14' space 'MATERIAL NO. ' space space space space space space space space SPACE t_fieldcat 'L' 'P',

3 'ITEMDESC' 'MAKTX' 'MAKT' '25' space 'MATERIAL DESCRIPTION' space space space space space space space space SPACE t_fieldcat 'L' 'C',

4 'MEINS' 'MEINS' 'MARA' '5' space 'UOM' space space space space space space space space SPACE t_fieldcat 'C' 'C',

5 'MENGE' 'MENGE' 'ISEG' '13' space 'ORG.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',

6 'WRTZL' 'WRTZL' 'ISEG' '13' space 'ORG.INV.VALUE' space space space space space space space space SPACE t_fieldcat 'R' 'C',

7 'BUCHM' 'BUCHM' 'ISEG' '13' space 'PHY.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',

8 'WRTBM' 'WRTBM' 'ISEG' '13' space 'PHY.INV.VALUE' space space space space space space space space SPACE t_fieldcat 'R' 'C',

9 'DIFFQTY' 'MENGE' 'ISEG' '13' space 'DIFF.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',

10 'DIFFVALUE' 'WRTZL' 'ISEG' '13' space 'DIFF.INV.VALUE' space space space space space space space space SPACE t_fieldcat SPACE 'P'.

x_layout-zebra = 'X'.

perform set_top_page_heading using t_heading t_event.

perform set_events using t_event.

w_status = ''.

w_repid = sy-repid.

w_comm = 'USER_COMMAND'.

call function 'REUSE_ALV_GRID_DISPLAY'

exporting

i_callback_program = w_repid

it_fieldcat = t_fieldcat

i_Callback_top_of_page = 'Top-of-page'

is_layout = x_layout

it_sort = t_sort

i_callback_pf_status_set = w_status

i_callback_user_command = w_comm

i_save = 'X'

it_events = t_event

i_grid_title = w_title

tables

t_outtab = ITS1

exceptions

program_error = 1

others = 2.

if sy-subrc <> 0.

message id sy-msgid type sy-msgty number sy-msgno

with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.

endif.

ENDFORM.

FORM set_fieldcat2 USING

p_colpos p_fieldname p_ref_fieldname p_ref_tabname

p_outputlen p_noout

p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt

p_hotspot p_showasicon p_checkbox p_edit

p_dosum

t_fieldcat TYPE slis_t_fieldcat_alv

P_JUST

P_FTYPE.

DATA: wa_fieldcat TYPE slis_fieldcat_alv.

CLEAR wa_fieldcat.

General settings

wa_fieldcat-fieldname = p_fieldname.

wa_fieldcat-col_pos = p_colpos.

wa_fieldcat-no_out = p_noout.

wa_fieldcat-hotspot = p_hotspot.

wa_fieldcat-checkbox = p_checkbox.

wa_fieldcat-icon = p_showasicon.

wa_fieldcat-do_sum = p_dosum.

Set output length.

IF NOT p_outputlen IS INITIAL.

wa_fieldcat-outputlen = p_outputlen.

ENDIF.

Set text headers.
IF NOT p_seltext_m IS INITIAL.

wa_fieldcat-seltext_m = p_seltext_m.

ENDIF.

IF NOT p_seltext_l IS INITIAL.

wa_fieldcat-seltext_l = p_seltext_l.

ENDIF.

IF NOT p_seltext_s IS INITIAL.

wa_fieldcat-seltext_s = p_seltext_s.

ENDIF.

IF NOT p_reptext_ddic IS INITIAL.

wa_fieldcat-reptext_ddic = p_reptext_ddic.

ENDIF.

IF NOT p_ddictxt IS INITIAL.

wa_fieldcat-ddictxt = p_ddictxt.

ENDIF.

IF NOT P_JUST IS INITIAL.

WA_FIELDCAT-JUST = P_JUST.

ENDIF.

Set as editable or not.

IF NOT p_edit IS INITIAL.

wa_fieldcat-input = 'X'.

wa_fieldcat-edit = 'X'.

ENDIF.

APPEND wa_fieldcat TO t_fieldcat.

ENDFORM. "set_fieldcat2

======================== Subroutines called by ALV ================

&----

*& Form top_of_page

&----

Called on top_of_page ALV event.
Prints the heading.

----

form top_of_page.

call function 'REUSE_ALV_COMMENTARY_WRITE'

exporting

it_list_commentary = t_heading.

ENDFORM.

form set_top_page_heading using t_heading type slis_t_listheader

t_events type slis_t_event.

data: x_heading type slis_listheader,

x_event type line of slis_t_event.

Report title

clear t_heading[].

clear x_heading.

x_heading-typ = 'H'.

x_heading-info = 'P I REPORT'.

append x_heading to t_heading.

Plant Nmae

clear x_heading.

x_heading-typ = 'S'.

x_heading-key = 'PLANT: '.

x_heading-info = its1-werks.

append x_heading to t_heading.

Control Date

clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL No: '.
x_heading-info = its1-werks.
append x_heading to t_heading.

*

Control date

clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL DATE: '.
x_heading-info = its1-werks.
append x_heading to t_heading.

*

User who is running the report
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'User: '.
x_heading-info = sy-uname.
append x_heading to t_heading.

Date of execution

clear x_heading.

x_heading-typ = 'S'.

x_heading-key = 'Date: '.

write sy-datum to x_heading-info.

append x_heading to t_heading.

Time of execution

clear x_heading.

x_heading-typ = 'S'.

x_heading-key = 'Time: '.

write sy-uzeit to x_heading-info.

append x_heading to t_heading.

Top of page event

x_event-name = slis_ev_top_of_page.

x_event-form = 'TOP_OF_PAGE'.

append x_event to t_events.

endform.

form set_events using t_events type slis_t_event.

data: x_event type line of slis_t_event.

endform.

krishnannarayanan_nampoot · ‎12-01-2007

Hi ,

I guess u r missing out the No_zero field in the fieldcatalog...When u build the fieldcatalog, pass 'X' to the field 'NO_ZERO'..this will take off the leading Zeros....its the way of doing although as mentioned u can use Conversion Exit..but it need loop on table and then modify each entry ..

Use the NO_ZERO in the field catalog..

Do reward points if this works out for you

Posting date i'll chek up & reply ...

Regards,

Former Member · ‎12-01-2007

hi,

can u plz tell me where to put dat 'fcat-no_zero = 'X' ' bcoz i am not able to find it where to put it plzz help me out as i am trying also as it is most urgent to me.

if u help me out ,u will be definately rewarded..

Former Member · ‎12-01-2007

HI,

I had solved the problem of leading zeros now my two more problems :-

1.) how to display the PERIOD (ITS1-BUDAT) Field when we execute the report.

2.) how to delete the fields which use to contain the zero values when i execute the report .

if anybody help me out ,he or she will be defiantely rewarded.

reply fast as it is urgent to me..

krishnannarayanan_nampoot · ‎12-03-2007

Hey Ric,

Firstly I apologise that the solution i gace earlier was answer for your second Ques...i mean NO_ZERO = 'X' will take out the fields that are zero and display them as blank..if u set it to SPACE then ZER value fields are displayed as 0.00.

U said u solved the problemof leading zeroes...

Did u use Conversion Exit over table ??

PLEASE AVOID THAT ..its a waste of processing.

USE L_ZERO..put it as space...

L_ZERO = SPACE.

Sorry once again for wrong info.

Regards,

URGENT: REGARDING POSTING DATE AND DELETION OF ZEROS IN ALV REPORT