Installation problem under AIX 5.3 with Oracle 10g

[Former Member]

Hello,

I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.

In ImportMonitor.Console.Log i have the following errors:

Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.

Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.

Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.

Loading of 'SAPSSEXC_4' import package: ERROR

Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.

Loading of 'SAPPOOL' import package: ERROR

Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.

Loading of 'DOKCLU' import package: ERROR

Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.

Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.

Loading of 'SAPCLUST' import package: ERROR

Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.

Inside SAPSSEXC_4.log i have the following errors:

/usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907

/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP

/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4

Compiled Oct 20 2007 02:05:46

/usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error

(DB) INFO: connected to DB

(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8

(DB) INFO: T512CLU deleted/truncated #20071130102908

myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.

myCluster (63.20.Imp): 656: return code received from nametab is 2

myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.

(CNV) ERROR: data conversion failed. rc = 2

(DB) INFO: disconnected from DB

/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)

/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908

Under SAPPOOL i have:

usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907

/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP

/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4

Compiled Oct 20 2007 02:05:46

/usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error

(DB) INFO: connected to DB

(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8

(DB) INFO: ATAB deleted/truncated #20071130102908

failed to read short nametab of table AT01 (rc=2)

(CNVPOOL) conversion failed for row 0 of table VARKEY = ã ±ã ±ã °â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  

(CNV) ERROR: data conversion failed. rc = 2

(DB) INFO: disconnected from DB

/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)

/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908

I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.

Do you have any idea how can i procceed with the errors?

Thank you in advance

Thanasis Porpodas

[Former Member]

Hi Thanasis,

Please try to copy again the export CD's / DVD's as some files may not be copied correctlly.

Costas

[Former Member]

Hi Costas,

I copy the DVD's and i have the same errors.

Do you have any other idea?

Thanasis

[Former Member]

Hi,

can you provide SAPSSEXC_4.log

regards,

kaushal

[Former Member]

Dear Kaushal,

the SAPSSEXC_4.log:

/usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130121056

/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP

/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]

Compiled Oct 20 2007 02:05:46

/usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error

(DB) INFO: connected to DB

(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8

(DB) INFO: T512CLU deleted/truncated #20071130121056

myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.

myCluster (63.20.Imp): 656: return code received from nametab is 2

myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.

(CNV) ERROR: data conversion failed. rc = 2

(DB) INFO: disconnected from DB

/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)

/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130121056

regards,

thanasis

[Former Member]

Hi,

look at sap note 921593 and search for myCluster ,

read that section following is a part of that note.

-

---

Symptom:

During the import into a UNICODE system the following error occurs

(for example in the SAPCLUST.log):

myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.

myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended

myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC .

myCluster (63.2.Imp): 1927: logic table is canonical.

myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.

myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC .

myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC .

myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.

myCluster: CLU4 *00001*

myCluster (63.2.Imp): 319: error during conversion of cluster item.

myCluster (63.2.Imp): 322: affected physical table is CLU4.

(CNV) ERROR: code page conversion failed rc = 2

-

---

|

| RSCP - Error

| Error from: Codepage handling (RSCP)

| code: 128 RSCPENOOBJ No such object

| Dummy module without real rscpmc[34]

| module: rscpmm no: 2 line: 75 T100: TS008

| TSL01: CPV p3: Dummy-IPC p4: rscpmc4_init

`----

---

Cause:

This problem is caused by incorrect data which should have been removed from the source system before the export.

Solution:

There are two possible workarounds:

1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;

search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.

2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;

search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

-

---

[Former Member]

Dear kaushal,

I read the note. I execute the solution you wrote me only for specific lines inside TSK file. Inside TSK i have a lot of 'xeq' errors and under CDCLS i have 'err'.

But i have the same problem again.

Do you have any other idea?

Thanasis

[markus_doehr2]

Did the same problem also occur with the original installation CD kernel?

--

Markus

[Former Member]

Dear Markus,

yes. I copy the original DVD kernel.

Thanasis