on 11-21-2007 6:59 AM
Hi all,
i have installed solution manager on windows2003. when i tried to start the solution manager dispatcher is getting stopped and workprocess in abap process list is getting ended status of disp+work.exe is j2ee info unavailable.how can i resolve this issue.
here i am giving the develpoer trace
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 01
sid SO1
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 2584
Sun Feb 21 12:26:02 2010
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2584) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 52 successfully loaded
shared lib "dw_xtc.dll" version 52 successfully loaded
shared lib "dw_stl.dll" version 52 successfully loaded
Sun Feb 21 12:26:03 2010
shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun Feb 21 12:26:07 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >wipro_SO1_01 <
DpShMCreate: sizeof(wp_adm) 12672 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D00040, size: 4607512)
DpShMCreate: allocated sys_adm at 05D00040
DpShMCreate: allocated wp_adm at 05D01E28
DpShMCreate: allocated tm_adm_list at 05D04FA8
DpShMCreate: allocated tm_adm at 05D04FD8
DpShMCreate: allocated wp_ca_adm at 060CA570
DpShMCreate: allocated appc_ca_adm at 060D0330
DpShMCreate: allocated comm_adm at 060D2270
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06153130
DpShMCreate: allocated gw_adm at 06153170
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 061531A0
DpShMCreate: allocated wall_adm at 061531A8
Sun Feb 21 12:26:08 2010
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Sun Feb 21 12:26:09 2010
J2EE server info
start = TRUE
state = STARTED
pid = 2408
argv[0] = E:\usr\sap\SO1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = E:\usr\sap\SO1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\SO1\SYS\profile\SO1_DVEBMGS01_wipro
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2190
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=SO1
argv[7] = -DSAPMYNAME=wipro_SO1_01
argv[8] = -DSAPPROFILE=E:\usr\sap\SO1\SYS\profile\SO1_DVEBMGS01_wipro
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
***LOG Q0K=> DpMsAttach, mscon ( wipro) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >wipro_SO1_01 <)
DpStartStopMsg: start msg sent
Sun Feb 21 12:26:10 2010
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
DpJ2eeLogin: j2ee state = CONNECTED
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Sun Feb 21 12:26:21 2010
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 1532
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2204) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2408)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun Feb 21 12:26:49 2010
ERROR => W0 (pid 2340) died [dpxxdisp.c 14021]
ERROR => W1 (pid 972) died [dpxxdisp.c 14021]
ERROR => W2 (pid 2336) died [dpxxdisp.c 14021]
ERROR => W3 (pid 2776) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 2124) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 1900) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 672) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W7 (pid 2772) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W8 (pid 2684) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thanks&Regards
Dinesh
Hi Dinesh,
On 2nd thoughts, I think the problem is to do with the DNS.
I found this problem in your log that you posted:
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS
check your c:\windows\system32\drivers\etc\hosts , it should contain your hostname (name of your windows box) and the FQDN if you have a domain install.
Also ensure you have defined your SAPGLOBALHOST in your startup profiles.
Hope that helps.
Regards,
Siddhesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Did you update your kernel after installation?
regards,
tamilboy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Dinesh,
You have posted dev_disp trace.
Can you post the j2ee trace ?
Regards,
Siddhesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
101 | |
13 | |
13 | |
11 | |
11 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.