on 11-15-2007 12:19 PM
Hello,
I had installed EP 7.0 in my system and now i need to install TREX.Anybody please guide mt to install TREX
with regards
Pradeep.B
After Installing Trex u need register Trex hosts with EP
Registering TREX Hosts with the Portal:
To register TREX hosts with the Portal, you have to first locate the name server and port of the TREX Installation. This is located in sapmsg.ini. You have to then set up the TREX name server in the J2EE Engine with the Visual Administrator.
Procedure
To locate the name server and port
1. Log on to the server with Administrator privileges.
2. Navigate to the installation folder of TREX (that is C:\usr\sap\trex_00\).
3. Double-click sapprofile.ini to open the file in Notepad.
4. Make a note of the port number. The default is 30001. You will need to enter this port number to the J2EE Visual Administrator in a later step.
To set up the TREX name server in the J2EE Engine
1. Open Windows Explorer in the server.
2. Navigate to J2EE Admin installation directory (that is C:\usr\sap\[SID]\JC##\j2ee\admin).
3. Double-click go.bat to start the J2EE Visual Administrator.
4. Log on to the Visual Administrator.
5. Choose Global Configuration  Services  TREX Service.
6. Select the nameserver.address properties field.
7. Enter the server name of the TREX instance and the port number.
8. Choose Update.
9. Choose the Save button.
10. Select Yes to restart the TREX Service.
11. To exit the J2EE Visual Administrator, choose Close  Exit.
Check the connection to the Enterprise Portal
1. Log on to the Enterprise Portal with super-administrator permissions.
2. Choose System Administration  Monitoring  Knowledge Management  TREX Monitor  Server Status.
You should see the status of the HTTP Server, Name Server, Queue Server, and Index Server is Available.
Hope this helps u
Regards
Krishna.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Installing TREX Steps:
1. Log on to Microsoft Windows 2000 Server with Administrator permissions.
2. Insert the TREX CD into your CD drive.
3. Open Windows Explorer.
4. Navigate to your CD drive and find the TREX sapinst.exe file (that is D:\TREX\SAPINST\NT\I386\sapinst.exe.
5. Double-click sapinst.exe. This will launch the TREX installation wizard.
6. Select Installation/Upgrade of a TREX 6.1 Instance and choose Next.
7. Select Run a new installation and choose OK if this screen appears.
8. Choose Next.
9. Choose Install a new TREX Instance, enter values for Instance Number and Destination Drive. Choose Next.
10. If a dialog box appears, choose OK
11. Enter a user name and password for the TREX user
12. Select Next in the Third-Party Requirements screen
13. In the following screen:
o Use the drop-down to select 1 for the number of index server processes and for the number of preprocessor server processes.
o Select HTTP Server checkbox.
o Select RFC Server to enable TREX if you require an SAP Gateway for your application to communicate to TREX through RFC connections. This is recommended for productive systems on Windows.
o Enter values for gateway instance number (recommended 47) and the gateway host.
Now choose Next.
14. Enter values for the proxy server if there is a proxy server between the TREX Server and the documents to be indexed.
15. Select the desired languages for searching
16. Review parameters and choose Start
Installation Check
1. In Microsoft Windows, choose Start  Programs  SAP TREX  [Instance ##]  documents  TREX installation summary.
This will display the version and build numbers of the components.
2. Run the test script.
3. Choose Start  Programs  SAP TREX  Instance ##  Tools  TREX ## Console.
4. If the script does not automatically run, type runInstallationTest.py from the pyton_support directory (that is <disk_drive>:\usr\sap\trex_<instance_number>\python_support).
Make sure you run the script from the Console opened by selecting the shortcut from the path in step 3.
A DOS prompt with an OK dialog will appear if successful
2.3 Starting and Stopping the TREX Service
The TREX Server will be installed as an NT Service on the Windows operating system. By default the TREX Server is set to automatically start with Windows.
It is not necessary to stop the TREX Service at this point. If you have stopped the TREX Services please start the services before continuing to the next step.
Manual Start
1. In Microsoft Windows, choose Start  Programs  SAP TREX  Instance XX  TREX Service  Start.
Manual Stop
1. In Microsoft Windows, choose Start  Programs  SAP TREX  Instance XX  TREX Service  Stop.
Automatic Start
1. In Microsoft Windows, choose Start  Control Panel  Administrative Tools  Services.
2. Locate the TREX Service and instance number.
3. Right-click and select properties.
4. Use the dropdown menu to select Automatic.
5. Choose OK.
Disable Automatic Start
1. In Microsoft Windows, choose Start  Control Panel  Administrative Tools  Services.
2. Locate the TREX Service and instance number.
3. Right-click and select properties.
4. Use the dropdown menu to select Manual.
5. Choose OK.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
94 | |
11 | |
11 | |
10 | |
9 | |
8 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.