on 10-29-2007 11:00 AM
I have made a system copy and trying to do sgen, but after selecting all the object --> it gives me the message. The help also provide with the details of modifying the table SERVTYPE to X, done that, but it changes to F again..
Any help??
Hello. After a system copy it is a usual issue that all your RFC connections do not work. This is caused by wrong entries in the TCode SECSTORE. Go to TCode SECSTORE then on the initial screen press F8 (execute). You will notice a few error entries. The top two should contain the string "RFC" in their name. Select only these two entries that contain the string "RFC" and delete them.
After that your RFCs should work correctly, you will be able to import your profiles correctly and also run SGEN without issues which was your original problem.
Hope this helps.
Best Regards
Phevos
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I tried copying the old profile at \sys\profile folder and tried to delete the old profile and then import from active server. But while deleting it did not delete it, saying does not contain the ............
Also I tried importing from acitve server. It gave me the following message
Checking of profiles of the active server
Complete check of instance profiles and a default profile
Log for default profile , Single check
Physical profile name : D:\usr\sap\WS1\SYS\profile\DEFAULT.PFL
Check on server : Webserver_WS1_00
Unknown parameter dbs/ora/tnsnames , a check cannot be performed
Log for instance profile , Single check
Physical profile name : D:\usr\sap\WS1\SYS\profile\WS1_DVEBMGS00_Webserver
No errors found
Log for instance profile , Complete check
Physical profile name : D:\usr\sap\WS1\SYS\profile\WS1_DVEBMGS00_Webserver
Log for entire check
No errors found
Complete check of start profiles
Log for start profile , Single check
Physical profile name : D:\usr\sap\WS1\SYS\profile\START_DVEBMGS00_Webserv
Instance profile missing
Log for start profile , Complete check
Physical profile name : D:\usr\sap\WS1\SYS\profile\START_DVEBMGS00_Webserv
Log for start profile list
While Importing Profile of ACTIVE SERVER
Import the start and instance profiles of all active servers
The following default profile is imported:
Webserver_WS1_00:D:\usr\sap\WS1\SYS\profile\DEFAULT.PFL
The following instance profiles are imported:
Webserver_WS1_00:D:\usr\sap\WS1\SYS\profile\WS1_DVEBMGS00_Webserver
The following start profiles are imported:
Webserver_WS1_00:D:\usr\sap\WS1\SYS\profile\START_DVEBMGS00_Webserver
Log for the import of profiles
Default profile D:\usr\sap\WS1\SYS\profile\DEFAULT.PFL
Could not be read. The import is therefore not possible.
Instance profile D:\usr\sap\WS1\SYS\profile\WS1_DVEBMGS00_Webserver
Could not be read. The import is therefore not possible.
Start profile D:\usr\sap\WS1\SYS\profile\START_DVEBMGS00_Webserver
Could not be read. The import is therefore not possible.
Complete check of instance profiles and a default profile
Log for default profile , Single check
Physical profile name : D:\usr\sap\WS1\SYS\profile\DEFAULT.PFL
Check on server : Webserver_WS1_00
Unknown parameter dbs/ora/tnsnames , a check cannot be performed
Log for instance profile , Single check
Physical profile name : D:\usr\sap\WS1\SYS\profile\WS1_DVEBMGS00_Webserver
But still while I check to check the profile it shows me the old name. And things are not moving ahead...........
Please suggest
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Did you deleted correctly the old profiles?
From RZ10, at the combo you must select one of the old profiles, and then select the menu "<i>Profile-Delete-All versions-Of a profile</i>". At the pop-up don't select to delete at filesystem level.
Repeat this for the 2 old profiles (instance & start).
Probably you will need to re-import the new profiles ("<i>Utilities-Import Profiles-From Active Servers</i>").
Best Regards,
JC Llanes.
Hi Juan,
The prblem with the Unknown error opening Profile Editor got resolved after I copied the defualt.PFL file in the sys\profile folder. That also resolved my another issue of MMC Disp+work showing yellow icon. Only adding .PFL file resolved the issue.
But now the profile thing is still the issue. I tried copying the old servers files and tried to delete the old profile, but gave some message that Version does not exists ...blah blah... and could not delete any old profile. My list in RZ10 stills hows the old names?? How can I get rid of the old server profiles from the list. If this is taken care, then my other issue or RZ04 and SGEN will also get resolved.....
Regards,
Prashant
To Eric's, question, there is no change of 32 to 64, its the same.
Markus, I have checked the smlg, as I have dont have any logon group assigned. But the instance is the same of the server WEBSERVER_WS1_00.
What I have found that the RFC ( sm59) Internal Connection WEBSERVER_WS1_00, the test fails. and for others "R/3 Connection" WS1( self test) it fails giving DB Error>>>
I think it( sgen) has to do with the RFC?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
The internal connection to active server doesn't work.
Since only servers with correct RFC-connection could be used to generate
ABAP load.
Check the "Internal connections" in SM59, to ensure all RFC-connections between the application servers work properly
you can not create or edited internal connection.
regards,
kaushal
Hi JC Llanes,
I think you are right, as I have done the system copy, I could see the old server profile. I tried to import the profiles of Active server, it does so, but some error of log, which tells that not able to read the log hence no import done. I could see the 3 profiles for my server( WS1), but in rz10 it shows the old servers profiles like BOS_DVEMGS00_SERVERNAME and START_....., but in actual the files in \sys\profile folder is the one for the actual server WS1. Why it is not showing here??????? Do I need to copy the old profiles in that folder and from rz10, I choose copy???????
In rz04 it shows DUMMY...
Hi,
You need to manually copy your old profiles to the new path, and then from RZ10 delete the old profiles from DB (first select one, then "delete all versions of a profile", and proceed with the other files). After doing that, "import profiles from active servers" (and adjust them if required).
Then you can create your instance at RZ04 and launch the SGEN correctly.
Hope this helps!
JC Llanes.
The same problem happened to me a few months ago.
source DB was 32-bit. Destination was 64-bit. the same happens if you go from 64-bit to 32-bit.
you must recompile some objects in Oracle (after shutting down SAP and Oracle)
sqlplus / as sysdba
startup upgrade;
@?/rdbms/admin/utlirp.sql
shutdown immediate;
startup
@?/rdbms/admin/utlrp.sql
exit
tell me if this works for you.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Check transaction SMLG if you are using the correct application server group.
--
Markus
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
81 | |
10 | |
10 | |
9 | |
7 | |
6 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.