on 10-24-2007 10:38 PM
Hi All,
I have uploaded a logo in development client using program RSTXLDMC and checked using transaction SO10. It is there. I checked in Utilities->Printing Test, logo does appear.
When I tried to print it in test client in the same box, it is not printing.
My logo is a tiff image and how do I check that in SE78?
Do I have to upload the logo again in test client??
Any help is greatly appreciated.
Thanks,
Haritha
Thanks for your replies.
I could solve my problem.
Haritha
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Did you transport Standard Text to Quality ? if not move it Quality.
When you RSTXLDMC then it creates standard text,so you need to move to quality.
Transporting the standard text :
use the program RSTXTRAN. to transport the standard texts.
you have to create a customizing request for this..
Procedure for transporting standard text
1. In se38 run program RSTXTRAN
2. Enter the following entries
Name of correction ( in which request number u want to
place ) -> DV3k590456
Text key - object -> Text
Text key - name (u r standard text name )
Text key - ID -> ST
Text key - language -> EN
3. click execute button (F8)
4. select u r standard text and press enter
5. If will ask whether to place the standard text in rquest number DV3k590456 then, press Yes button
6. u r standard text will be placed in DV3k590456
Thanks
Seshu
Thanks
Seshu
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Haritha,
1. Are you able to see the logo in the print preview..
If so
2. what type of printer you are using... is it laser or dot matrix?
Can you change the printer and try to print to other printer?
just check it once
~~Guduri
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
95 | |
11 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.