on 08-20-2005 5:02 AM
Hi all,
I am new bee to this forum. can anybody guide me about this problem. i was working around for the past 4 days. still i was not able to find out the solution for this problem. when i am trying to connect SAP Server through SAPGUI, it was not connecting. i cross check with SAP MMC in the process list only one process was running (Message service) remaing processes were stopped. but disp+work.exe was running but with error message as <b>"Running but message server unreachable"</b>. as per my knowledge this may be problem with sapmsg.ini. plz let me know how to fix this problem.
Hi!
I have same problem after installation SAPNW7. TrialSP12.
I'm running virtual MS Windows SP2 using VMWare Workstation 8.0
dev_ms is attached.
---------------------------------------------------
trc file: "dev_ms", trc level: 1, release: "700"
---------------------------------------------------
[Thr 3436] Sat May 12 11:17:33 2012
[Thr 3436] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 3432
[Thr 3436] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3432) [msxxserv.c 1824]
[Thr 3436] MsInitAclInfo: acl file D:\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 3436] MsGetOwnIpAddr: my host addresses are :
[Thr 3436] 1 : [10.10.0.10] sap.localhost (HOSTNAME)
[Thr 3436] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 3436] 3 : [192.168.238.128] allon-51c22207c.corp.loc (NILIST)
[Thr 3436] MsHttpInit: full qualified hostname = sap.localhost
[Thr 3436] HTTP logging is switch off
[Thr 3436] set HTTP state to LISTEN
[Thr 3436] MsHttpOwnDomain: own domain[1] = localhost
[Thr 3436] ms/icf_info_server : deleted
[Thr 3436] *** I listen to port sapmsNSP (3600) ***
[Thr 3436] *** I listen to internal port 3900 (3900) ***
[Thr 3436] *** HTTP port 8100 state LISTEN ***
[Thr 3436] CUSTOMER KEY: >I1895797210<
[Thr 3436] Sat May 12 11:28:22 2012
[Thr 3436] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.0.10) after 300 secs received [msxxserv.c 3165]
[Thr 3436] *** ERROR => MsSCheckConnections: disconnect now [10.10.0.10] [msxxserv.c 3169]
Regards,
Olga.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Olga,
Can you clarify the IP address and hostname of the virtual Windows where the instance is installed?
Following 2 lines shows 2 IP which I am confuse what are they for. Maybe the answer is there
[Thr 3436] 1 : [10.10.0.10] sap.localhost (HOSTNAME)
[Thr 3436] 3 : [192.168.238.128] allon-51c22207c.corp.loc (NILIST)
I recommend to set a proper IP (default VMware IP is good) and hostname (or Windows computer name) to the virtual Windows. SAP and many other applications need valid value in order to install, especially troubleshooting
Hi Ramesh,
Can you post the dev_msg file in your 'work' directory.
Regards,
Siddhesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Dimitry,
The zip file is too big to transfer to you.
So i can't do this.
Now, I have resolved this problem by reinstalling SAP instance.
Thanks very much anywhere.
You are so warmhearted.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dimitry Haritonov
Thanks for your help.
My R/3 sysetem: 4.7
Kernel level : I think it shoud be 640_REL, for I could not login my SAP system ever.
dev_disp:
ERROR => MsISnd2: not_attached [msxxi.c 1180]
LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3873]
ms: I could not find this file at usr\sap\....\work\...
Additionally, the sapstart.log is
"SAP-R/3-Startup Program
Starting at 2005/09/29 15:23:39
Startup Profile: "D:\usr\sap\PSE\SYS\profile\START_DVEBMGS00_idesserver"
Starting Programs
(2452) Execute: D:\usr\sap\PSE\SYS\exe\run\strdbs.cmd PSE
(2488) CreateProcess: D:\usr\sap\PSE\SYS\exe\run\msg_server.exe pf=D:\usr\sap\PSE\SYS\profile\PSE_DVEBMGS00_idesserver
(2496) CreateProcess: D:\usr\sap\PSE\SYS\exe\run\disp+work.exe pf=D:\usr\sap\PSE\SYS\profile\PSE_DVEBMGS00_idesserver
(2504) CreateProcess: D:\usr\sap\PSE\DVEBMGS00\igs\bin\igswd.exe -dir=D:\usr\sap\PSE\DVEBMGS00\igs -mode=all
"
All the above is enough?
Thanks.
Best regard,
Paul
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Paul,
-Did you changed rdisp/myname manually like dedcribed in note 311118? please find ms_dev and check if the message "...MsSLoginClient, not_unique..." appears there
-If it is not the case, please check also note 72248.
-Else, restart the system and send to my email all files from work directory (zip it !!!).
*I did have this problem once, it was solved by upgrading the kernel (usr\sap\<SID\SYS\exe\run directory). I suggest you to download the latest kernle for your system.
Regards,
Dimitry
Hello Dimitry,
We are working on SSO. For configuring the same, we set 2 profile parameters login/create_sso2_ticket as 2 and login/accept_sso2_ticket as 1 in the BW system. Then the server was restarted. Since then, we are not able to restart the server. In the MMC disp+work.exe shows the status as running but not connected to message server. When we try to access the j2ee engine via browser we get the error "Dispatcher running, but no server connected". When we try to logon to BW System using SAP front end, it gives a message "No logon possible (no hw ID received by mssg server). Kindly help, if you could.
Thanks,
Rukmani.
Hi all,
I have the same problem, and I have checked all the ports in C:\WINNT\system32\drivers\etc\services which are all existence.
Description:
After my installing IDES server, i want to prevent multi-user login this system, so I use the Transcaction RZ10 to change Default.pfl with adding a parameter "login/disable_multi_gui_login = 1", than I close databse and restart the system. But when i want to use SAPMMC to set up SAP instance, disp+work.exe dosen't work just as "Running but not connected to Message Server". When i try to logon SAP GUI, error message is like this "no logon possible(no hw ID received by mssg server)" after my imput my user name and password.
What I do is just to have chaged profile "default.pfl" with adding a parameter "login/disable_multi_gui_login = 1", I don't know why?
Anybody can help me?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello to all of you,
please inform me with:
-your R/3 release
-your kernel level (find in SM51->release information)
-please restart your system (via mmc) and check your trace file:
usr\sap\<SID>\DVEBMGSXX\work\dev_disp
usr\sap\<SID>\DVEBMGSXX\work\ms
(send it sallaboy@gmail.com or publish here)
Regards,
Dimitry
your c:\windows\system32\drivers\etc\services file might have changed. Check that whether you have an entry in the services file for that sysid and port.
regards
SKM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Ramesh,
Please apply the latest Kernel Path to the System.
regards
Anand.M
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
77 | |
9 | |
9 | |
7 | |
6 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.