cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to start the server at http://localhost:50100

Former Member
0 Kudos

No matter if I uninstall completely and reinstall(including MAXDB,deleting sapdb,usr folders from c:/ ),My installation always ends with the following message:

"The installatin of SAP NetWeaver CE 7.1 is finished,

but some serious errors occured during the install. Please see the installation log C:\usr\sap\CE1\insthome\primaryApplicationServer\work\install.log"

If I search for messages with level as Error, I see the following at the end of the log file:

Sep 24, 2007 10:09:57 PM [Info]: TASKENGINE: execute task SAPServiceCreate

Sep 24, 2007 10:09:57 PM [Info]:

Sep 24, 2007 10:09:57 PM [Info]: Start CREATE_SCS_SERVICE [com.sap.xpf.controller.TaskExecutionStep]

Sep 24, 2007 10:09:57 PM [Info]: at: 2007.09.24 - 22.09.57[yyyy.MM.dd - HH.mm.ss]

Sep 24, 2007 10:09:57 PM [Info]: execute task SAPServiceCreate

Sep 24, 2007 10:09:57 PM [Info]: TASKENGINE: execute task SAPServiceCreate

Sep 24, 2007 10:09:57 PM [Info]: looking for method setINSTALL_SAPINIT_SH

Sep 24, 2007 10:09:57 PM [Info]: looking for method setPATH_TO_PROFILE

Sep 24, 2007 10:09:57 PM [Info]: looking for method setDIR_GF_EXE

Sep 24, 2007 10:09:57 PM [Info]: looking for method setSAPINIT

Sep 24, 2007 10:09:57 PM [Info]: looking for method setUSER

Sep 24, 2007 10:09:57 PM [Info]: looking for method setNR

Sep 24, 2007 10:09:57 PM [Info]: looking for method setGROUP

Sep 24, 2007 10:09:57 PM [Info]: looking for method setSID

Sep 24, 2007 10:09:57 PM [Info]: Execute in current working dir: C:\Documents and Settings\Raja\Local Settings\Temp\I1190685001\Windows

Sep 24, 2007 10:09:57 PM [Info]: Start external command...

Sep 24, 2007 10:09:57 PM [Info]: Using parent environment...

Sep 24, 2007 10:09:57 PM [Info]: Executing Argv:

Sep 24, 2007 10:09:57 PM [Info]: Arg[0]: C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv

Sep 24, 2007 10:09:57 PM [Info]: Arg[1]: -q

Sep 24, 2007 10:09:57 PM [Info]: Arg[2]: -r

Sep 24, 2007 10:09:57 PM [Info]: Arg[3]: -s

Sep 24, 2007 10:09:57 PM [Info]: Arg[4]: CE1

Sep 24, 2007 10:09:57 PM [Info]: Arg[5]: -p

Sep 24, 2007 10:09:57 PM [Info]: Arg[6]: C:/usr/sap/CE1/SYS/profile/CE1_SCS00_D919VGD1

Sep 24, 2007 10:09:57 PM [Info]: Arg[7]: -n

Sep 24, 2007 10:09:57 PM [Info]: Arg[8]: 00

Sep 24, 2007 10:09:57 PM [Info]: Arg[9]: -U

Sep 24, 2007 10:09:57 PM [Info]: Arg[10]: NT AUTHORITY\LocalService

Sep 24, 2007 10:09:57 PM [Info]: Arg[11]: -P

Sep 24, 2007 10:09:57 PM [Info]: Arg[12]: ""

Sep 24, 2007 10:09:57 PM [Info]: Process started. Try to get Streams..

Sep 24, 2007 10:09:57 PM [Info]: Got Streams. Try to read them...

Sep 24, 2007 10:10:41 PM [Info]: Service not started within 40 seconds.

Sep 24, 2007 10:10:41 PM [Info]: Process exited with rc: -1

Sep 24, 2007 10:10:41 PM [Error]: excpetion in step:

Sep 24, 2007 10:10:41 PM [Error]: name: CREATE_SCS_SERVICE [com.sap.xpf.controller.TaskExecutionStep]

Sep 24, 2007 10:10:41 PM [Fatal]: com.sap.xpf.tasklib.TaskLibraryException: cannot start serice. rc was: -1

at com.sap.instancemgt.win.SAPServiceCreateDEV.execute(SAPServiceCreateDEV.java:80)

at com.sap.xpf.tasklib.execution.TaskExecutionObjectJava.execute(TaskExecutionObjectJava.java:54)

at com.sap.xpf.tasklib.TaskLibraryEngine.executeTask(TaskLibraryEngine.java:256)

at com.sap.xpf.tasklib.TaskLibraryEngine.executeTask(TaskLibraryEngine.java:264)

at com.sap.xpf.controller.TaskExecutionStep.execute(TaskExecutionStep.java:115)

at com.sap.xpf.controller.Controller.execute(Controller.java:506)

at com.sap.xpf.controller.Controller.start(Controller.java:292)

at com.sap.inst.engine.customactions.CallController.install(CallController.java:93)

at com.zerog.ia.installer.actions.CustomAction.installSelf(DashoA8113:-1)

at com.zerog.ia.installer.Action.install(DashoA8113:-1)

at com.zerog.ia.installer.Action.install(DashoA8113:-1)

at com.zerog.ia.installer.GhostDirectory.install(DashoA8113:-1)

at com.zerog.ia.installer.Installer.install(DashoA8113:-1)

at com.zerog.ia.installer.actions.InstallProgressAction.m(DashoA8113:-1)

at com.zerog.ia.installer.actions.ProgressPanelAction$1.run(DashoA8113:-1)

Sep 24, 2007 10:10:41 PM [Info]: End CREATE_SCS_SERVICE [com.sap.xpf.controller.TaskExecutionStep]

Sep 24, 2007 10:10:41 PM [Info]: rc: 1

Sep 24, 2007 10:10:41 PM [Info]: at: 2007.09.24 - 22.10.41[yyyy.MM.dd - HH.mm.ss]

Sep 24, 2007 10:10:41 PM [Info]: duration: 00:00:44[HH:mm:ss]

Sep 24, 2007 10:10:41 PM [Info]:

Sep 24, 2007 10:10:41 PM [Info]: Error during executing

Sep 24, 2007 10:10:41 PM [Info]: End Controller

Sep 24, 2007 10:10:41 PM [Info]: at : 2007.09.24 - 22.10.41[yyyy.MM.dd - HH.mm.ss]

Sep 24, 2007 10:10:41 PM [Info]: durationt : 00:17:08[HH:mm:ss]

Sep 24, 2007 10:10:41 PM [Info]: status : ERROR

When I look for the server at http://localhost:50100,I get page cannot be displayed error,though I start CE1 in management console and turns green.

Please help me on this. I started installing netweaver 6.4 on my vista system and then I moved to netweaver ce version on my xp sp2 system.Still I am not able to succeed with any of the installations.

If somebody can provide me suggestions it would be very very great.

Thanks

Karthik

Accepted Solutions (1)

Accepted Solutions (1)

Vlado
Advisor
Advisor
0 Kudos

Hi Karthik,

Regarding the installation error - please have a look at thread.

For the issue with the homepage of the server - if it's really running (meaning all nodes green) you should check the server logs in C:\usr\sap\CE1\J01\j2ee\cluster\server0\log for more details.

Hope that helps!

-- Vladimir

Former Member
0 Kudos

Vladimir,

Thanks for helping me.

I changed the status as OK for the CREATE SCS SERVICE step in the steps.xml.

Following that I opened mmc and restarted CE1. After some seconds, the only node called D919VGD1 0 visible under CE1 becomes green.

I waited for a couple of minutes and tried http://localhost/50100. Still I am getting "page cannot be displayed" message on IE.

Also, I see only the following folder under C:\usr\sap\CE1\J01:

data,exe,sec,igs,work . I couldn't rind j2ee folder. Is that the issue? Can you please tell me how I can fix this?

Please suggest.

Thanks again.

Vlado
Advisor
Advisor
0 Kudos

Yes, that's definitely the issue. Apparently, you don't have the J01 instance completely installed.

Did you restart the installation after changing the value in steps.xml? If not you can try that. Or (if this workaround doesn't work) it's better to uninstall (including the database) and start a new installation.

HTH!

-- Vladimir

Answers (1)

Answers (1)

Former Member
0 Kudos

Thanks again for your time and help. Because of this help, I think I am almost near the successful installation.

I would like to clarify if I need to apply the license key for extension upto 90 days after 30 days of trial or just after installing the software.In my case I am assume I have to apply only after 30 days.

1)Since I had already tried with a fresh second installation (the one after which I changed steps.xml ) I tried reinstalling today on top of second installation.

This time also the installation completed with some errors but they were different:

Sep 27, 2007 12:07:08 AM [Info]: TASKENGINE: execute task SAPInstanceStart

Sep 27, 2007 12:07:08 AM [Info]:

Sep 27, 2007 12:07:08 AM [Info]: Start START_SCS_INSTANCE [com.sap.xpf.controller.TaskExecutionStep]

Sep 27, 2007 12:07:08 AM [Info]: at: 2007.09.27 - 00.07.08[yyyy.MM.dd - HH.mm.ss]

Sep 27, 2007 12:07:09 AM [Info]: execute task SAPInstanceStart

Sep 27, 2007 12:07:09 AM [Info]: TASKENGINE: execute task SAPInstanceStart

Sep 27, 2007 12:07:09 AM [Info]: execute xml task: SAPInstanceStart

Sep 27, 2007 12:07:09 AM [Info]: start of task START_SAP_INSTANCE()

Sep 27, 2007 12:07:30 AM [Error]: excpetion in step:

Sep 27, 2007 12:07:30 AM [Error]: name: START_SCS_INSTANCE [com.sap.xpf.controller.TaskExecutionStep]

Sep 27, 2007 12:07:30 AM [Fatal]: com.sap.xpf.tasklib.TaskLibraryException: com.sap.sdt.tools.execute.ExtProcessOperationException:

Error while processing the result.

Could not start SAP Instance Could not execute C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapcontrol.exe

-prot PIPE -nr 00 -host D919VGD1 -function StartWait 1800 10, return code 1. You can check the file(s)

C:/usr/sap/CE1/insthome/primaryApplicationServer/work/SAPInstanceSTART_00null.log,

C:/usr/sap/CE1/insthome/primaryApplicationServer/work/SAPInstanceSTART_00null.log to which the output of the process has been redirected.

at com.sap.xpf.tasklib.execution.TaskExecutionObjectXML.execute(TaskExecutionObjectXML.java:184)

at com.sap.xpf.tasklib.TaskLibraryEngine.executeTask(TaskLibraryEngine.java:256)

at com.sap.xpf.tasklib.TaskLibraryEngine.executeTask(TaskLibraryEngine.java:264)

at com.sap.xpf.controller.TaskExecutionStep.execute(TaskExecutionStep.java:115)

at com.sap.xpf.controller.Controller.execute(Controller.java:506)

at com.sap.xpf.controller.Controller.start(Controller.java:292)

at com.sap.inst.engine.customactions.CallController.install(CallController.java:93)

at com.zerog.ia.installer.actions.CustomAction.installSelf(DashoA8113:-1)

at com.zerog.ia.installer.Action.install(DashoA8113:-1)

at com.zerog.ia.installer.Action.install(DashoA8113:-1)

at com.zerog.ia.installer.GhostDirectory.install(DashoA8113:-1)

at com.zerog.ia.installer.Installer.install(DashoA8113:-1)

at com.zerog.ia.installer.actions.InstallProgressAction.m(DashoA8113:-1)

at com.zerog.ia.installer.actions.ProgressPanelAction$1.run(DashoA8113:-1)

Sep 27, 2007 12:07:30 AM [Info]: End START_SCS_INSTANCE [com.sap.xpf.controller.TaskExecutionStep]

Sep 27, 2007 12:07:30 AM [Info]: rc: 1

Sep 27, 2007 12:07:30 AM [Info]: at: 2007.09.27 - 00.07.30[yyyy.MM.dd - HH.mm.ss]

Sep 27, 2007 12:07:30 AM [Info]: duration: 00:00:21[HH:mm:ss]

Sep 27, 2007 12:07:30 AM [Info]:

Sep 27, 2007 12:07:30 AM [Info]: Error during executing

Sep 27, 2007 12:07:30 AM [Info]: End Controller

Sep 27, 2007 12:07:30 AM [Info]: at : 2007.09.27 - 00.07.30[yyyy.MM.dd - HH.mm.ss]

Sep 27, 2007 12:07:30 AM [Info]: durationt : 00:01:57[HH:mm:ss]

Sep 27, 2007 12:07:30 AM [Info]: status : ERROR

2)I looked at the log file mentioned above:

C:/usr/sap/CE1/insthome/primaryApplicationServer/work/SAPInstanceSTART_00null.log,

Could n't make out anything from the following lines in that log:

StartWait

FAIL: The network path was not found., CreateFile failed in plugin_pipefopen()

3)When I started CE1 in MMC,this time I could see C:\usr\sap\CE1\J01\j2ee\cluster\server0\log and I see the

folders-archive,service,system and 2 files(applications_00.0.txt and defaultTrace_00.0.trc) inside log folder.

I have attached a link containing snapshot of the MMC for your reference.

http://karthikeyankomar.myphotoalbum.com/view_photo.php?set_albumName=album02&id=After_reinstallatio...

When I go for the URL http://localhost:50100, it now displays a different error:

503 Service not available

Error: -6

Version: 7010

Component: ICM J2EE Dispatcher

Date/Time: Thu Sep 27 00:45:15 2007

Module: http_j2ee2.c

Line: 751

Server: D919VGD1_CE1_01

Error Tag: {-}

Detail: ICM running but no server with HTTP connected

Couldn't make much out of these log files and messages. Sorry for such a long mail.

Thanks

Karthik

Former Member
0 Kudos

Hi Karthik,

Were you able to fix the insllation problem for "Error while processing the result.

Could not start SAP Instance Could not execute C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapcontrol.exe "?? Please let me know. I too am getting the same error.

Thanks

Krishna

Benny
Product and Topic Expert
Product and Topic Expert
0 Kudos

What kind of a computer are you ruinning here and do you have full rights to your operating system?

Regards,

Benny