on 09-20-2007 10:43 AM
Hey guys, when we try to start this BI7 instance we get the following error in the "Developer trace" & the Dispatcher isn't starting.... pls help...
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiIBindSocket: bind (10013: WSAEACCES: Permission denied) [nixxi.cpp 3173]
ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 1584
(SI_EPORT_INUSE/10013; I4; ST) [nixxi.cpp 3173]
ERROR => DpCommInit: NiBufListen (rc=-4) [dpxxdisp.c 9431]
DP_FATAL_ERROR => DpSapEnvInit: DpCommInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
Message was edited by:
Christopher Jansz
Hi Chistopher,
Welcome to SDN,
can you post errors at dev_disp, dev_ms and dev_w0?
regards
Juan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
the posted error is from dev_disp and the others are as follows
dev_w0: blank
dev_ms:
-
trc file: "dev_ms", trc level: 1, release: "700"
-
[Thr 4376] Thu Sep 20 14:36:41 2007
[Thr 4376] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 11004
[Thr 4376] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 11004) [msxxserv.c 1824]
[Thr 4376] load acl file = F:\usr\sap\BI7\SYS\global\ms_acl_info.DAT
[Thr 4376] MsGetOwnIpAddr: my host addresses are :
[Thr 4376] 1 : [10.226.160.91] attnwsrv (HOSTNAME)
[Thr 4376] 2 : [127.0.0.1] ATTNWSRV.massap.corp.pri (LOCALHOST)
[Thr 4376] MsHttpInit: full qualified hostname = attnwsrv
[Thr 4376] HTTP logging is switch off
[Thr 4376] set HTTP state to LISTEN
[Thr 4376] ms/icf_info_server : deleted
[Thr 4376] *** I listen to port sapmsBI7 (3670) ***
[Thr 4376] *** I listen to internal port 3970 (3970) ***
[Thr 4376] *** HTTP port 8170 state LISTEN ***
[Thr 4376] CUSTOMER KEY: >Q0441168068<
[Thr 4376] Thu Sep 20 14:48:01 2007
[Thr 4376] *** ERROR => MsSCheckConnections: no response from client C0 (10.226.160.91) after 300 secs received [msxxserv.c 3165]
[Thr 4376] *** ERROR => MsSCheckConnections: disconnect now [10.226.160.91] [msxxserv.c 3169]
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 70
sid BI7
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 9060
Thu Sep 20 14:36:41 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (70 9060) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3970
Thu Sep 20 14:36:53 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0197.qqq.nxst) took 12 seconds
Thu Sep 20 14:37:10 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ATTNWSRV_BI7_70 <
DpShMCreate: sizeof(wp_adm) 13560 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05C30040, size: 4234384)
DpShMCreate: allocated sys_adm at 05C30040
DpShMCreate: allocated wp_adm at 05C31A28
DpShMCreate: allocated tm_adm_list at 05C34F20
DpShMCreate: allocated tm_adm at 05C34F50
DpShMCreate: allocated wp_ca_adm at 05FA51E0
DpShMCreate: allocated appc_ca_adm at 05FA9830
DpShMCreate: allocated comm_adm at 05FAAFA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0602BE50
DpShMCreate: allocated gw_adm at 0602BE90
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0602BEC0
DpShMCreate: allocated wall_adm at 0602BEC8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiIBindSocket: bind (10013: WSAEACCES: Permission denied) [nixxi.cpp 3173]
ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 1584
(SI_EPORT_INUSE/10013; I4; ST) [nixxi.cpp 3173]
ERROR => DpCommInit: NiBufListen (rc=-4) [dpxxdisp.c 9431]
DP_FATAL_ERROR => DpSapEnvInit: DpCommInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Sep 20 14:37:20 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Sep 20 09:07:20 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA -1 Run no 0 0 0
1 DIA -1 Run no 0 0 0
2 DIA -1 Run no 0 0 0
this is the complete file
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 70
sid BI7
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 9060
Thu Sep 20 14:36:41 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (70 9060) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3970
Thu Sep 20 14:36:53 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0197.qqq.nxst) took 12 seconds
Thu Sep 20 14:37:10 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ATTNWSRV_BI7_70 <
DpShMCreate: sizeof(wp_adm) 13560 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05C30040, size: 4234384)
DpShMCreate: allocated sys_adm at 05C30040
DpShMCreate: allocated wp_adm at 05C31A28
DpShMCreate: allocated tm_adm_list at 05C34F20
DpShMCreate: allocated tm_adm at 05C34F50
DpShMCreate: allocated wp_ca_adm at 05FA51E0
DpShMCreate: allocated appc_ca_adm at 05FA9830
DpShMCreate: allocated comm_adm at 05FAAFA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0602BE50
DpShMCreate: allocated gw_adm at 0602BE90
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0602BEC0
DpShMCreate: allocated wall_adm at 0602BEC8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiIBindSocket: bind (10013: WSAEACCES: Permission denied) [nixxi.cpp 3173]
ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 1584
(SI_EPORT_INUSE/10013; I4; ST) [nixxi.cpp 3173]
ERROR => DpCommInit: NiBufListen (rc=-4) [dpxxdisp.c 9431]
DP_FATAL_ERROR => DpSapEnvInit: DpCommInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Sep 20 14:37:20 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Sep 20 09:07:20 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA -1 Run no 0 0 0
1 DIA -1 Run no 0 0 0
2 DIA -1 Run no 0 0 0
3 DIA -1 Run no 0 0 0
4 DIA -1 Run no 0 0 0
5 DIA -1 Run no 0 0 0
6 UPD -1 Run no 0 0 0
7 UPD -1 Run no 0 0 0
8 UPD -1 Run no 0 0 0
9 ENQ -1 Run no 0 0 0
10 BTC -1 Run no 0 0 0
11 BTC -1 Run no 0 0 0
12 BTC -1 Run no 0 0 0
13 SPO -1 Run no 0 0 0
14 UP2 -1 Run no 0 0 0
Dispatcher Queue Statistics Thu Sep 20 09:07:20 2007
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 0 | 2000 | 0 | 0 |
--------
+
DIA | 0 | 0 | 2000 | 0 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Thu Sep 20 09:07:20 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Sep 20 09:07:20 2007
=============================
Slots: 300, Used: 0, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Sep 20 14:37:25 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ATTNWSRV_BI7_70 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 handle not set (PID:-1)
[DpWpDied] W1 handle not set (PID:-1)
[DpWpDied] W2 handle not set (PID:-1)
[DpWpDied] W3 handle not set (PID:-1)
[DpWpDied] W4 handle not set (PID:-1)
[DpWpDied] W5 handle not set (PID:-1)
[DpWpDied] W6 handle not set (PID:-1)
[DpWpDied] W7 handle not set (PID:-1)
[DpWpDied] W8 handle not set (PID:-1)
[DpWpDied] W9 handle not set (PID:-1)
[DpWpDied] W10 handle not set (PID:-1)
[DpWpDied] W11 handle not set (PID:-1)
[DpWpDied] W12 handle not set (PID:-1)
[DpWpDied] W13 handle not set (PID:-1)
[DpWpDied] W14 handle not set (PID:-1)
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 9060) [dpxxdisp.c 10333]
Good Bye .....
Hi Christrosher,
May be that you could try to do a comeplete shutdown and reboot of the System and then do a proper startup of SAP appplication.
You will have to Stop the SAP Application and then the database.
Next, You can stop the SAP Services then after that the Dtabase (Oracle) services.
After this you can reboot the System (OS level)!
After the system has come up. You can start the Oracle Services first next try to make the Oracle listerner & instance startup.
After this you can do a SAP to Database Check using the following command:
R3trans -d and R3trans -w !
For details on R3trans utility u can refer http://help.sap.com/saphelp_47x200/helpdata/en/60/e560c8591b11d2b413006094b9ea64/frameset.htm
If the outcome for SAP to Database connection is o.k , then you can Startup the SAP application NOW.
Please maintain the sequence of startup and shutdown that I have mentioned ....
I hope that this helps you. If not please update with proper error message!
Regards,
Prem
Message was edited by:
Premkishan Chourasia
Hi,
Check Dispatcher port in services file(sapdp<instnum> with 32<instnum>)
Regards,
Ravindran D
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Christopher,
This looks like an access error.... are you logon as <sid>adm when starting the system?
regards
Juan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
84 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.