on 09-05-2007 1:39 PM
Hi guru,
i did the file to file scenario as per the Srinivas Vanamala blog.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii
My file is picking from source folder. i am not able to get any thing to the target folder.
will u any of u are able to help me out.
Thanks & Regards,
Lakshmi...
Hi lakshmi,
1.Follow link in RWB //MDT/communicationChannelServlet and look for detailed Message Description.
2.Also,Please go through TRACE.
Hope this will help.
Regards,
Akshay Jamgaonkar.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Lakshmi,
See if your file adapter contains error in below link
http://<server>:<port>/mdt/amtServlet
If you don't find error message there, check in the communication channel monitor in http://<server>:<port>/mdt/channelmonitorservlet and see what error it is throwing
Regards,
Sreenivas
Hi Srinivas,
i got from Adapter Monitering for Recever Adapter
<b>Receiver Adapter v1027 for Party '', Service 'BS_RECE_FILE':
Configured at 18:40:53 2007-09-05
Up and running - no message processing until now</b>
for Serder Adapter <b>Sender Adapter v1014 for Party '', Service 'BS_SEND_FILE':
Configured at 17:45:06 2007-09-05
Up and running: Last message processing started 18:41:36 2007-09-05
last poll interval started 18:45:30 2007-09-05
length 6,000 secs
</b>
plz help me to over come this situation..
Thanks & Regards,
Lakshmi..
Hi Srinivas,
i am getting the success for all , but only one is error that is <b>Transmitting the message to endpoint http://xitraining:50000/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 404..</b>
will u plz let me know what i can do
Thanks & Regards,
Lakshmi...
Look inthis Blog For Errors.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
And for Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
********Reward points if usefull************
Hi Lakshmi,
As mentioned in this blog - /people/shabarish.vijayakumar/blog/2007/07/26/troubleshooting-the-file-adapter-last-updated-on-02-july10
You can see that wrong port is mentioned.
Verify the below things May be your administrator can help you
a) Run Tcode SMICM , and then goto -> services (or Shift-F1). Check what is your ICM HTTP port. Usually it is 8000.
b) Open the business system of your integration server in the SLD, Check if you have specified http://<host>:8000/sap/xi/engine?type=entry as pipeline URL there.
c) Verify if com.sap.aii.connect.integrationserver.r3.httpport is correctly set in the Exchange Profile.
Regards,
Sreenivas
i think you have changes the port
http://xitraining:50000/sap/xi/engine?type=entry from this to http://xitraining:8000/sap/xi/engine?type=entry under the URL tab in Business system.
the role of the business system is integreation server.
after this settings you should be able to see the message in SXMB_MONI,
Is the message status sucessfull in the sxmb_moni? if not what is the error you are getting now?
Hi Khan,
I changed role of BS as Integration Server.
With this link
http://xitraining:8000/sap/xi/engine?type=entry
i got this code.
<b>SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Empty HTTP request received</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Empty HTTP query received. No message processing possible</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
</b>
will u plz let me know what i need to do.
Thanks & Regards,
Lakshmi....
Hi Lakshmi,
Check the status of the sender communication channel in the RWB..
Cheers,
Prasanthi.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
wht is the status of ur msg in sxmb_moni in XI.
wht could u see in RWB?
Regards,
Prateek
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Prateek,
thanks for ur reply.
i did the same in sxmb_moni, i am not able to see any messages in this.
In RWB, in Message Monitering it is showing status as SYSTEM ERROR.
In Sender Service and Sender Interface i am able to see the things what i maintained in scenario.
but in case of Receiver Party and Receiver Service i am not able to find the things what i maintained in my scenario.
will u plz help me out.
Regards,
Lakshmi..
User | Count |
---|---|
93 | |
10 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.