on 08-10-2007 9:51 AM
Hello,
we have a solution manager 4.0 installation on IBM iSeries (System i / AS 400).
Kernel is 700 with patch lvl 92/dbsl patch 70.
Central instance is number 50, scs instance is 51.
The system is running in so far that I can logon to it and transaction SICK reports no errors.
Examining the system more accurately revealed that the j2ee server is configured but not operational (transaction SMICM).
Looking at the running jobs, i see that jcontrol, msg_server and server0 are not running.
The developer trace of dev_ms of the central instance shows errors:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-
trc file: "dev_ms", trc level: 1, release: "700"
-
[Thr 1] Fri Aug 10 09:28:07 2007
[Thr 1] MsSOsPrivInit: Run priority adjusted to 12
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM iSeries with OS400)
relno 7000
patchlevel 0
patchno 87
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2547
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2547) [msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3173]
[Thr 1] *** ERROR => NiIBindSocket: SiBind failed for hdl 0 / sock 5
(SI_EPORT_INUSE/67; I4; ST) [nixxi.cpp 3173]
[Thr 1] *** ERROR => MsSCommInit: NiBufListen(sapmsS01) (rc=NIESERV_USED) [msxxserv_mt. 10124]
[Thr 1] *** ERROR => MsSInit: MsSCommInit [msxxserv_mt. 1857]
[Thr 1] *** ERROR => main: MsSInit [msxxserv_mt. 5896]
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2547) [msxxserv_mt. 5944]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The trace dev_ms of the scs instance is ok, but with wrong ports in my discretion:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-
trc file: "dev_ms", trc level: 1, release: "700"
-
[Thr 1] Fri Aug 10 09:27:18 2007
[Thr 1] MsSOsPrivInit: Run priority adjusted to 12
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM iSeries with OS400)
relno 7000
patchlevel 0
patchno 87
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2535
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2535) [msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] load acl file = /usr/sap/S01/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [192.2.1.15] VERSAP01 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] LOOPBACK (LOCALHOST)
[Thr 1] 3 : [192.2.1.183] 192.2.1.183 (NILIST)
[Thr 1] 4 : [194.221.94.253] SAPROUTER (NILIST)
[Thr 1] 5 : [192.2.1.185] 192.2.1.185 (NILIST)
[Thr 1] 6 : [192.2.1.186] 192.2.1.186 (NILIST)
[Thr 1] 7 : [192.2.1.187] 192.2.1.187 (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = VERSAP01.KVN.DE
[Thr 1] HTTP logging is switch off
[Thr 1] MsHttpOwnDomain: own domain[1] = KVN.DE
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsS01 (3650) ***
[Thr 1] *** I listen to internal port 3950 (3950) ***
[Thr 1] CUSTOMER KEY: >E1363402629<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The profile default.pfl looks good to me:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
SAPDBHOST = VERSAP01
j2ee/dbtype = db4
j2ee/dbname = S01
j2ee/dbhost = VERSAP01
SAPSYSTEMNAME = S01
SAPGLOBALHOST = VERSAP01
j2ee/scs/host = VERSAP01
j2ee/scs/system = 51
j2ee/ms/port = 3951
rdisp/bufrefmode = sendoff,exeoff
DIR_PUT = /usr/sap/S01/put
rdisp/mshost = VERSAP01
rdisp/msserv = sapmsS01
rdisp/msserv_internal = 3950
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Any idea ?
Is anything wrong with our configuration(which we did not change manually) ?
Do we have to patch the kernel ?
Best regards,
Juergen Scheckelhoff
Hello Mister Scheckelhoff,
there is much time gone, but now we face the same problem and nothing helps. We couldn´t get rid of the error or get any information out of the system to identify the reason.
netstat/lsof shows - nothing
changing the port - no change of behaviour
tracing
server restart ! leads in the same problem.
no additional applications running on this host
Could you tell us your solution or workaround?
We have this problem on a productive IDES-System 700 on AIX-LPAR.
thank you in advance
Marcus Hermsen
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Mr.Hermsen,
some profile parameters were set wrong by the installation routines.
SAP send me some reference profiles from a running solution manager installation and I synchronized our profiles accordingly.
I cannot remember exactly which parameters were wrong, but i guess it was one of the port numbers.
Good luck and best regards,
Jürgen Scheckelhoff
Here are the profiles sent to me from SAP:
........1........2........3........4........5........6........7.......
***********Beginning of data*************
#.****************************************************************************
#.*
#.* Default profile DEFAULT.PFL
#.*
#.* Version = 000002
#.* Generated by user = CLANGER
#.* Generated on = 22.06.2007 , 14:33:12
#.*
#.****************************************************************************
SAPSYSTEMNAME = SSM
SAPGLOBALHOST = as0015
SAPDBHOST = as0015
j2ee/dbtype = db4
j2ee/dbname = SSM
j2ee/dbname = SSM
j2ee/dbhost = as0015
DIR_PUT = /usr/sap/SSM/put
#----
-
1. SAP Central Service Instance for J2EE
#----
-
j2ee/scs/host = as0015
j2ee/scs/system = 11
j2ee/ms/port = 3911
rdisp/bufrefmode = sendoff,exeoff
#----
-
1. SAP Messaging Service for ABAP
#----
-
........1........2........3........4........5........6........7.......
#----
-
rdisp/mshost = as0015
rdisp/msserv = sapmsSSM
rdisp/msserv_internal = 3910
#----
-
1. Login Client
#----
-
login/system_client = 001
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.****************************************************************************
#.*
#.* Instance profile SSM_DVEBMGS10_AS0015
#.*
#.* Version = 000006
#.* Generated by user = CLANGER
#.* Generated on = 22.06.2007 , 14:34:08
#.*
#.****************************************************************************
SAPSYSTEMNAME = SSM
SAPSYSTEM = 10
INSTANCE_NAME = DVEBMGS10
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
#----
-
1. Trace level
#----
-
rdisp/TRACE = 3
#----
-
1. Number of work processes
#----
-
rdisp/wp_no_dia = 4
rdisp/wp_no_btc = 2
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
#----
-
1. ABAP parameters
#----
-
ztta/roll_extension = 2000000000
#CL: reduced initial memory size to save resources. Increase if necessary
#em/initial_size_MB = 4096
em/initial_size_MB = 2048
abap/buffersize = 600000
zcsa/table_buffer_area = 64000000
rsdb/cua/buffersize = 16383
rtbb/buffer_length = 16383
rtbb/max_tables = 500
#RV: Sollte beim Einspielen von grossen Hopa Queues aktiviert werden
#rdisp/max_wprun_time = 0
#----
-
1. Language
#----
-
zcsa/system_language = E
zcsa/installed_languages = DE
#----
-
1. ICM parameters
#----
-
icm/server_port_0 = PROT=HTTP,PORT=80$$
#----
-
1. Java parameters
#----
-
jstartup/trimming_properties = off
jstartup/protocol = on
jstartup/vm/home = /QIBM/ProdData/Java400/jdk14
jstartup/max_caches = 500
jstartup/release = 700
jstartup/instance_properties = $(jstartup/j2ee_properties):$(jstartup/sdm_prope
j2ee/dbdriver = /usr/sap/SSM/SYS/jdbc/tbx/jt400.jar
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
exe/j2ee = $(DIR_EXECUTABLE)/jcontrol$(FT_EXE)
rdisp/j2ee_timeout = 600
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
ms/server_port_0 = PROT=HTTP,PORT=81$$
j2ee/instance_id = ID1053262
#CL: Keep properties file, if some vm params need to be set differently than def
java/as4/keep_props = 1
#----
-
1. Solman Konfiguration lt. IMG
#----
-
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = as0015.wdf.sap.corp
icm/host_name_full = as0015.wdf.sap.corp
icm/server_port_1 = 25000
login/no_automatic_user_sapstar = 0
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
........1........2........3........4........5........6........7........
***********Beginning of data*************
#.******************************************************************************
#.*
#.* Instance profile SSM_SCS11_AS0015
#.*
#.* Version = 000001
#.* Generated by user = CLANGER
#.* Generated on = 22.06.2007 , 14:35:40
#.*
#.******************************************************************************
SAPSYSTEMNAME = SSM
SAPSYSTEM = 11
INSTANCE_NAME = SCS11
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
#----
-
1. Trace level
#----
-
rdisp/TRACE = 1
#----
-
1. SAP Messaging Service for Java
#----
-
rdisp/msserv = 0
rdisp/msserv_internal = 3911
ms/standalone = 1
ms/server_port_0 = PROT=HTTP,PORT=81$$
#----
-
1. SAP Locking Service
#----
-
enque/serverinst = 11
enque/table_size = 4096
rdisp/enqname = $(rdisp/myname)
enque/snapshot_pck_ids = 100
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.*****************************************************************************
#.*
#.* Start profile START_DVEBMGS10_AS0015
#.*
#.* Version = 000006
#.* Generated by user = CLANGER
#.* Generated on = 22.06.2007 , 14:37:38
#.*
#.*****************************************************************************
SAPSYSTEMNAME = SSM
SAPSYSTEM = 10
INSTANCE_NAME = DVEBMGS10
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
DIR_INSTALL = /usr/sap/SSM/SYS
DIR_PROFILE = $(DIR_INSTALL)/profile
PF = $(DIRPROFILE)/SSM_DVEBMGS10_as0015
#----
-
1. Trace level
#----
-
rdisp/TRACE = 3
service/trace = 3
#----
-
1. Initialize the execution environment
#----
-
Execute_00 = local $(DIR_EXECUTABLE)/cleanipc 10 remove
Execute_01 = local CLRLIB LIB(R3WRK10)
Execute_02 = local $(DIR_EXECUTABLE)/sapmscsa pf=$(_PF) -n
Execute_03 = local $(DIR_EXECUTABLE)/saposcol
Execute_04 = local $(DIR_EXECUTABLE)/DLTOLDPKGS SSM
#----
-
1. Start SAP messaging service
#----
-
MS = $(DIREXECUTABLE)/msg_server$(FT_EXE)
Start_Program_00 = local $(_MS) pf=$(_PF)
#----
-
1. Start application server
#----
-
DW = $(DIREXECUTABLE)/disp+work$(FT_EXE)
Start_Program_01 = local $(_DW) pf=$(_PF)
#----
-
1. Start syslog collector daemon
#----
-
CO = $(DIREXECUTABLE)/rslgcoll
Start_Program_02 = local $(_CO) pf=$(_PF) -F
#----
-
1. Start syslog send daemon
#----
-
SE = $(DIREXECUTABLE)/rslgsend
Start_Program_03 = local $(_SE) pf=$(_PF) -F
#----
-
1. Start internet graphics server
#----
-
IG = $(DIREXECUTABLE)/igswd_mt
Start_Program_04 = local $(_IG) -mode=profile pf=$(_PF)
#----
-
1. Cleanup after shutdown
#----
-
Stop_Program_00 = local $(DIR_EXECUTABLE)/cleanipc 10 remove
Stop_Program_01 = local CLRLIB LIB(R3WRK10)
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.****************************************************************************
#.*
#.* Start profile START_SCS11_AS0015
#.*
#.* Version = 000003
#.* Generated by user = CLANGER
#.* Generated on = 22.06.2007 , 14:39:04
#.*
#.****************************************************************************
SAPSYSTEMNAME = SSM
SAPSYSTEM = 11
INSTANCE_NAME = SCS11
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
DIR_INSTALL = /usr/sap/SSM/SYS
DIR_PROFILE = $(DIR_INSTALL)/profile
PF = $(DIRPROFILE)/SSM_SCS11_as0015
#----
-
1. Initialize the execution environment
#----
-
Execute_00 = local $(DIR_EXECUTABLE)/cleanipc 11 remove
Execute_01 = local CLRLIB LIB(R3WRK11)
Execute_02 = local $(DIR_EXECUTABLE)/sapmscsa pf=$(_PF) -n
#----
-
1. Start SAP messaging service
#----
-
#----
-
#----
-
MS = $(DIREXECUTABLE)/msg_server$(FT_EXE)
Start_Program_00 = local $(_MS) pf=$(_PF)
#----
-
1. Start SAP locking service
#----
-
EN = $(DIREXECUTABLE)/enserver$(FT_EXE)
Start_Program_01 = local $(_EN) pf=$(_PF)
#----
-
1. Cleanup after shutdown
#----
-
Stop_Program_00 = local $(DIR_EXECUTABLE)/cleanipc 11 remove
Stop_Program_01 = local CLRLIB LIB(R3WRK11)
***********End of Data*******************
User | Count |
---|---|
81 | |
9 | |
9 | |
7 | |
7 | |
6 | |
6 | |
6 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.