on 07-06-2007 10:04 AM
Hello,
We have the SAP Router configured and the connection to the OSS also established some time back. But now for the last two days, when we get into SM59 and do a connection test to the SAPOSS, we get an error message saying SNC Processing failed.
We have tried pinging from router to the sap server, router to OSS server and all possible methods.
Still we are not getting connected.
Below is the dEV_rout
OCATION SAProuter 38.10 on 'hpgsaprt'
ERROR GSS-API(maj): No credentials were supplied
GSS-API(min): No credentials found for this name (not logged on) (USER
name="p:CN=hpgsaprt, OU=0000860616, OU=SAProuter, O=SAP, C=DE"
TIME Fri Jul 06 12:29:35 2007
RELEASE 700
COMPONENT SNC (Secure Network Communication)
VERSION 5
RC -4
MODULE sncxxall.c
LINE 1432
DETAIL SncPAcquireCred
SYSTEM CALL gss_acquire_cred
ERRNO
ERRNO TEXT
DESCR MSG NO
DESCR VARGS GSS-API(maj): No credentials were supplied;;;;
;;;;GSS-API(min): No credentials found for this name (not logged on) (USER;;;;
;;;;name="p:CN=hpgsaprt, OU=0000860616, OU=SAProuter, O=SAP, C=DE"
DETAIL MSG N
DETAIL VARGS
COUNTER 9
<<- ERROR: SncSessionInitiatorAK()==SNCERR_GSSAPI
'target_acl_key' (addr=00D1F46C, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632 pserv2
ERROR => NiSncIInitHdlSecurity: SncSessionInitiatorAK failed (rc=-4;0022F298) [nisnc.c 1082]
ERROR => NiSnc2Connect C1/-1, 194.39.131.34 (rc=-17) [nirout.cpp 2816]
ERROR => NiRClientHandle: NiRExRouteCon for C1/-1 'hpgsapsn' failed (rc=-17) [nirout.cpp 2243]
Hi Tanuj
Thanks for the reply.
Still the same error persists. i am running the SAPROUTER as the same user who created the SAPGENPSE.
when i test from SM59, i still get an error.
Still something to do with credentials. See the below dev_rout
Thanks in advance...
Sun Jul 08 11:34:18 2007
ERROR => SncPAcquireCred()==SNCERR_GSSAPI [sncxxall.c 1432]
GSS-API(maj): No credentials were supplied
GSS-API(min): No credentials found for this name (not logged on) (USER=srtadm)
Could't acquire INITIATING credentials for
name="p:CN=hpgsaprt, OU=0000860616, OU=SAProuter, O=SAP, C=DE"
ERROR => ErrISetSys: error info too large [err.c 944]
Sun Jul 08 11:34:18 2007
LOCATION SAProuter 38.10 on 'hpgsaprt'
ERROR GSS-API(maj): No credentials were supplied
GSS-API(min): No credentials found for this name (not logged on) (USER
name="p:CN=hpgsaprt, OU=0000860616, OU=SAProuter, O=SAP, C=DE"
TIME Sun Jul 08 11:34:18 2007
RELEASE 700
COMPONENT SNC (Secure Network Communication)
VERSION 5
RC -4
MODULE sncxxall.c
LINE 1432
DETAIL SncPAcquireCred
SYSTEM CALL gss_acquire_cred
ERRNO
ERRNO TEXT
DESCR MSG NO
DESCR VARGS GSS-API(maj): No credentials were supplied;;;;
;;;;GSS-API(min): No credentials found for this name (not logged on) (USER;;;;
;;;;name="p:CN=hpgsaprt, OU=0000860616, OU=SAProuter, O=SAP, C=DE"
DETAIL MSG N
DETAIL VARGS
COUNTER 3
<<- ERROR: SncSessionInitiatorAK()==SNCERR_GSSAPI
'target_acl_key' (addr=00D1F46C, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632 pserv2
ERROR => NiSncIInitHdlSecurity: SncSessionInitiatorAK failed (rc=-4;0022F268) [nisnc.c 1082]
ERROR => NiSnc2Connect C1/-1, 194.39.131.34 (rc=-17) [nirout.cpp 2816]
ERROR => NiRClientHandle: NiRExRouteCon for C1/-1 'hpgsappr.hoshandubai.local' failed (rc=-17) [nirout.cpp 2243]
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Check if you are able to run these commands .. with the user you have started the saprouter.
Some other commands that are useful in Router maintenance.
--> sapgenpse
-->sapgenpse get_my_name
-->sapgenpse get_my_name v n Issuer
--> sapgenpse get_my_name v n validity
If you are able to get the output for the blow commands .. this proves that we have started the router with the correct user.
Award points if helpful.
Thanks,
Tanuj
Hi,
Hope you have started the SAPROUTER .
But Just in case ..........These are the commands for start of the SAP Router.
Start SAPROUTER.
saprouter -r -V 2 -K "p:<Distinguished Name>"
Whenever saprouttab file is changed Please run the following command
saprouter -n -V 2 -K "p:<Distinguished Name>"
Log can be seen in dev_rout file.
You should start saprouter only with the user you have installed because while installation you would have run this coomand.
<u>Setting Secured Login to SAPROUTER</u>
D:\saprouter>sapgenpse seclogin -p local.pse
<u>Output</u>
running seclogin with USER="<b>sapuser</b>"
Added SSO-credentials for PSE "d:\saprouter\local.pse"
"CN=hostname, OU=0000500195, OU=SAProuter, O=SAP, C=DE"
So from the above coomand , we can understand that only sapuser can start the router and no other user.
Thanks,
Tanuj
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
87 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.