cancel
Showing results for 
Search instead for 
Did you mean: 

SAP disp+work

Former Member
0 Kudos

Hi Gurus

I have installed mySAP ecc 5.0 with oracle 9.2 DB on solaris 10.My Central instance got installed without any error.But my Database installation i got some errors.

Fist error was

ERROR 2007-06-27 13:14:16

FRF-00007 Unable to open RFC connection.

ERROR 2007-06-27 13:14:16

FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed

Connect_PM GWHOST=LKDB06, GWSERV=sapgw00, ASHOST=LKDB06, SYSNR=00

LOCATION CPIC (TCP/IP) on local host

ERROR partner not reached (host LKDB06, service 3300)

TIME Wed Jun 27 13:14:16 2007

RELEASE 640

COMPONENT NI (network interface)

VERSION 37

RC -10

MODULE nixxi_r_mt.cpp

LINE 8528

DETAIL NiPConnect

SYSTEM CALL connect

ERRNO 146

ERRNO TEXT Connection refused

COUNTER 14

I have edited some information on keydb.xml file and anter that installation was success but at the final stage it didn`t ask for DDIC password.

Finally i found my dispacher not up and running.

her is my dispacher trace file.why is not getting start.Pls help me.

-


trc file: "dev_disp", trc level: 1, release: "640"

-


Wed Jun 27 13:12:22 2007

kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)

length of sys_adm_ext is 312 bytes

systemid 370 (SUN on SPARC CPU with Solaris 2.2)

relno 6400

patchlevel 0

patchno 43

intno 20020600

make: single threaded, ASCII, 64 bit

pid 20048

***LOG Q00=> DpSapEnvInit, DPStart (00 20048) [dpxxdisp.c 1100]

shared lib "dw_xml.so" version 43 successfully loaded

shared lib "dw_xtc.so" version 43 successfully loaded

shared lib "dw_stl.so" version 43 successfully loaded

shared lib "dw_gui.so" version 43 successfully loaded

MtxInit: -2 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: JAVA is not active

DpShMCreate: sizeof(wp_adm) 6848 (856)

DpShMCreate: sizeof(tm_adm) 2852592 (14192)

DpShMCreate: sizeof(wp_ca_adm) 26400 (88)

DpShMCreate: sizeof(appc_ca_adm) 8800 (88)

DpShMCreate: sizeof(comm_adm) 216000 (432)

DpShMCreate: sizeof(vmc_adm) 0 (432)

DpShMCreate: sizeof(wall_adm) (22440/36712/80/104)

DpShMCreate: SHM_DP_ADM_KEY (addr: ffffffff72500000, size: 3176280)

DpShMCreate: allocated sys_adm at ffffffff72500000

DpShMCreate: allocated wp_adm at ffffffff72501898

DpShMCreate: allocated tm_adm_list at ffffffff72503358

DpShMCreate: allocated tm_adm at ffffffff72503380

DpShMCreate: allocated wp_ca_adm at ffffffff727bba70

DpShMCreate: allocated appc_ca_adm at ffffffff727c2190

DpShMCreate: allocated comm_adm_list at ffffffff727c43f0

DpShMCreate: allocated comm_adm at ffffffff727c4408

DpShMCreate: allocated vmc_adm_list at ffffffff727f8fc8

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated ca_info at ffffffff727f8ff0

DpShMCreate: allocated wall_adm at ffffffff727f8ff8

MBUF state OFF

EmInit: MmSetImplementation( 2 ).

<ES> client 0 initializing ....

<ES> InitFreeList

<ES> block size is 4096 kByte.

Using implementation std

EsIUnamFileMapInit: ES base = 0xfffffffe70000000

EsStdInit: Extended Memory 4092 MB allocated

<ES> 1022 blocks reserved for free list.

ES initialized.

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG Q0K=> DpMsAttach, mscon ( LKDB06) [dpxxdisp.c 9736]

Wed Jun 27 13:12:23 2007

CCMS: Initalizing shared memory of size 40000000 for monitoring segment.

CCMS: start to initalize 3.X shared alert area (first segment).

      • ERROR => W0 (pid 20053) died [dpxxdisp.c 12187]

      • ERROR => W1 (pid 20054) died [dpxxdisp.c 12187]

my types changed after wp death/restart 0xbf --> 0xbe

      • ERROR => W2 (pid 20055) died [dpxxdisp.c 12187]

my types changed after wp death/restart 0xbe --> 0xbc

      • ERROR => W3 (pid 20056) died [dpxxdisp.c 12187]

my types changed after wp death/restart 0xbc --> 0xb8

      • ERROR => W4 (pid 20057) died [dpxxdisp.c 12187]

      • ERROR => W5 (pid 20059) died [dpxxdisp.c 12187]

my types changed after wp death/restart 0xb8 --> 0xb0

      • ERROR => W6 (pid 20061) died [dpxxdisp.c 12187]

my types changed after wp death/restart 0xb0 --> 0xa0

DpMsgAdmin: Set release to 6400, patchlevel 0

MBUF state PREPARED

MBUF component UP

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]

DpMsgAdmin: Set patchno for this platform to 43

Release check o.K.

      • ERROR => W7 (pid 20062) died [dpxxdisp.c 12187]

my types changed after wp death/restart 0xa0 --> 0x80

      • DP_FATAL_ERROR => DpWPCheck: no more work processes

      • DISPATCHER EMERGENCY SHUTDOWN ***

increase tracelevel of WPs

killing W0-20053 (SIGUSR2)

      • ERROR => DpWpKill(20053, SIGUSR2) failed [dpxxtool.c 2468]

killing W1-20054 (SIGUSR2)

      • ERROR => DpWpKill(20054, SIGUSR2) failed [dpxxtool.c 2468]

killing W2-20055 (SIGUSR2)

      • ERROR => DpWpKill(20055, SIGUSR2) failed [dpxxtool.c 2468]

killing W3-20056 (SIGUSR2)

      • ERROR => DpWpKill(20056, SIGUSR2) failed [dpxxtool.c 2468]

killing W4-20057 (SIGUSR2)

      • ERROR => DpWpKill(20057, SIGUSR2) failed [dpxxtool.c 2468]

killing W5-20059 (SIGUSR2)

      • ERROR => DpWpKill(20059, SIGUSR2) failed [dpxxtool.c 2468]

killing W6-20061 (SIGUSR2)

      • ERROR => DpWpKill(20061, SIGUSR2) failed [dpxxtool.c 2468]

killing W7-20062 (SIGUSR2)

      • ERROR => DpWpKill(20062, SIGUSR2) failed [dpxxtool.c 2468]

NiWait: sleep (10000 msecs) ...

NiISelect: timeout 10000 ms

NiISelect: maximum fd=14

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Jun 27 13:12:33 2007

NiISelect: TIMEOUT occured (10000 ms)

dump system status

Workprocess Table (long) Wed Jun 27 07:42:33 2007

========================

No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table

-


0 DIA 20053 Ended no 1 0 0

1 DIA 20054 Ended no 1 0 0

2 UPD 20055 Ended no 1 0 0

3 ENQ 20056 Ended no 1 0 0

4 BTC 20057 Ended no 1 0 0

5 BTC 20059 Ended no 1 0 0

6 SPO 20061 Ended no 1 0 0

7 UP2 20062 Ended no 1 0 0

Dispatcher Queue Statistics Wed Jun 27 07:42:33 2007

===========================

--------


+
+

+

+
--


+

Typ

now

high

max

writes

reads

--------


+
+

+

+
--


+

NOWP

4

4

2000

5

1

--------


+
+

+

+
--


+

DIA

3

3

2000

3

0

--------


+
+

+

+
--


+

UPD

0

0

2000

0

0

--------


+
+

+

+
--


+

ENQ

0

0

2000

0

0

--------


+
+

+

+
--


+

BTC

0

0

2000

0

0

--------


+
+

+

+
--


+

SPO

0

0

2000

0

0

--------


+
+

+

+
--


+

UP2

0

0

2000

0

0

--------


+
+

+

+
--


+

max_rq_id 11

wake_evt_udp_now 1

wake events total 7, udp 3 ( 42%), shm 4 ( 57%)

since last update total 7, udp 3 ( 42%), shm 4 ( 57%)

Dump of tm_adm structure: Wed Jun 27 07:42:33 2007

=========================

Term uid man user term lastop mod wp ta a/i (modes)

Workprocess Comm. Area Blocks Wed Jun 27 07:42:33 2007

=============================

Slots: 300, Used: 1, Max: 0

--------


+
+
--


+

id

owner

pid

eyecatcher

--------


+
+
--


+

0

DISPATCHER

-1

WPCAAD000

NiWait: sleep (5000 msecs) ...

NiISelect: timeout 5000 ms

NiISelect: maximum fd=14

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Jun 27 13:12:38 2007

NiISelect: TIMEOUT occured (5000 ms)

Shutdown server ...

DpJ2eeDisableRestart

DpModState: buffer in state MBUF_PREPARED

NiBufSend starting

NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete

MsINiWrite: sent 110 bytes

MsIModState: change state to SHUTDOWN

DpModState: change server state from STARTING to SHUTDOWN

Switch off Shared memory profiling

ShmProtect( 57, 3 )

ShmProtect(SHM_PROFILE, SHM_PROT_RW

ShmProtect( 57, 1 )

ShmProtect(SHM_PROFILE, SHM_PROT_RD

DpWakeUpWps: wake up all wp's

Stop work processes...

Stop gateway

killing proc (20051) (SOFT_KILL)

Stop icman

killing proc (20052) (SOFT_KILL)

Terminate gui connections

kill(20051,0) successful -> process alive

waiting for termination of gateway

NiWait: sleep (1000 msecs) ...

NiISelect: timeout 1000 ms

NiISelect: maximum fd=14

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

child process 20051 died: 0

child process 20052 died: 0

Wed Jun 27 13:12:39 2007

NiISelect: TIMEOUT occured (1000 ms)

kill(20051,0) -> ESRCH: process died

kill(20052,0) -> ESRCH: process died

DpHalt: cancel all lcom connections

MPI CancelAll 2 -> 0

MPI DeleteAll 2 -> 0

NiIMyHostName: hostname = 'LKDB06'

AdGetSelfIdentRecord: > <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0

DpConvertRequest: net size = 163 bytes

NiBufSend starting

NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete

MsINiWrite: sent 562 bytes

send msg (len 110+452) to name -, type 4, key -

detach from message server

***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]

NiBufSend starting

NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete

MsINiWrite: sent 110 bytes

MsIDetach: send logout to msg_server

MsIDetach: call exit function

DpMsShutdownHook called

NiSelClear: removed hdl 3 from selectset

MBUF state OFF

AdGetSelfIdentRecord: > <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8

LOCK WP ca_blk 1

make DISP owner of wp_ca_blk 1

DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 13)

MBUF component DOWN

NiBufClose: clear extensions for hdl 3

NiBufSetStat: bufstat of hdl 3 changed from OK to OFF

NiICloseHandle: shutdown and close hdl 3 / socket 11

MsIDetach: detach MS-system

EsCleanup ....

ShmDelete( 13 )

cleanup event management

cleanup shared memory/semaphores

ShmCleanup SHM_SYS_ADM_KEY

ShmCleanup( 1 )

ShmCreate( 1, 0, 2, 0xffffffff7fffef28 )

ShmProtect( 1, 3 )

ShmCreate( 1, 0, 2, -> 0xffffffff72c00000 )

ShmCleanup SHM_DP_ADM_KEY

ShmCleanup( 2 )

ShmCreate( 2, 0, 2, 0xffffffff7fffef28 )

ShmProtect( 2, 3 )

ShmCreate( 2, 0, 2, -> 0xffffffff72500000 )

ShmCleanup SHM_DP_CA_KEY

ShmCleanup( 3 )

ShmCreate( 3, 0, 2, 0xffffffff7fffef28 )

ShmProtect( 3, 3 )

ShmCreate( 3, 0, 2, -> 0xffffffff71800000 )

ShmCleanup SHM_PF_KEY

ShmCleanup( 4 )

ShmCreate( 4, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 4 ) = 0740 (octal)

ShmCleanup SHM_PRES_BUF

ShmCleanup( 14 )

ShmCreate( 14, 0, 2, 0xffffffff7fffef28 )

ShmGet( 10, 14, 0, 2, 0xffffffff7fffede0 )

ShmGet( 10, 14, 0, 2, -> 0xffffffff7400a000 )

ShmProtect( 14, 3 )

ShmProtect: Key=14 not attached

ShmProtect( 14, 3 )

ShmCreate( 14, 0, 2, -> 0xffffffff7400a000 )

ShmCleanup SHM_CALI_BUFFER

ShmCleanup( 11 )

ShmCreate( 11, 0, 2, 0xffffffff7fffef28 )

ShmGet( 10, 11, 0, 2, 0xffffffff7fffede0 )

ShmCleanup SHM_DB_TBUFF

ShmCleanup( 19 )

ShmCreate( 19, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 19 ) = 0740 (octal)

ShmCleanup SHM_DB_TBUFF_P

ShmCleanup( 33 )

ShmCreate( 33, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 33 ) = 0740 (octal)

ShmCleanup SHM_DB_STBUFF

ShmCleanup( 41 )

ShmCreate( 41, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 41 ) = 0740 (octal)

ShmCleanup SHM_DB_TTBUFF

ShmCleanup( 42 )

ShmCreate( 42, 0, 2, 0xffffffff7fffef28 )

ShmGet( 40, 42, 0, 2, 0xffffffff7fffede0 )

ShmCreate( 40, 0, 2, 0xffffffff7fffec78 )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_FTBUFF

ShmCleanup( 43 )

ShmCreate( 43, 0, 2, 0xffffffff7fffef28 )

ShmGet( 40, 43, 0, 2, 0xffffffff7fffede0 )

ShmCreate( 40, 0, 2, 0xffffffff7fffec78 )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_SNTBUFF

ShmCleanup( 45 )

ShmCreate( 45, 0, 2, 0xffffffff7fffef28 )

ShmGet( 40, 45, 0, 2, 0xffffffff7fffede0 )

ShmCreate( 40, 0, 2, 0xffffffff7fffec78 )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_IRBUFF

ShmCleanup( 44 )

ShmCreate( 44, 0, 2, 0xffffffff7fffef28 )

ShmGet( 40, 44, 0, 2, 0xffffffff7fffede0 )

ShmCreate( 40, 0, 2, 0xffffffff7fffec78 )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_OBJ_BUFFER

ShmCleanup( 54 )

ShmCreate( 54, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 54 ) = 0740 (octal)

ShmCleanup SHM_DB_SYNC

ShmCleanup( 46 )

ShmCreate( 46, 0, 2, 0xffffffff7fffef28 )

ShmGet( 40, 46, 0, 2, 0xffffffff7fffede0 )

ShmCreate( 40, 0, 2, 0xffffffff7fffec78 )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_CUA_BUFFER

ShmCleanup( 47 )

ShmCreate( 47, 0, 2, 0xffffffff7fffef28 )

ShmGet( 40, 47, 0, 2, 0xffffffff7fffede0 )

ShmCreate( 40, 0, 2, 0xffffffff7fffec78 )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_OTR_BUFFER

ShmCleanup( 64 )

ShmCreate( 64, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 64 ) = 0740 (octal)

ShmCleanup SHM_DB_ESM_BUFFER

ShmCleanup( 65 )

ShmCreate( 65, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 65 ) = 0740 (octal)

ShmCleanup SHM_ROLL_AREA_KEY

ShmCleanup( 9 )

ShmCreate( 9, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 9 ) = 0740 (octal)

ShmProtect( 9, 3 )

ShmCreate( 9, 0, 2, -> 0xfffffffe60000000 )

ShmCleanup SHM_PAGING_AREA_KEY

ShmCleanup( 8 )

ShmCreate( 8, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 8 ) = 0740 (octal)

ShmCleanup SHM_ROLL_ADM_KEY

ShmCleanup( 17 )

ShmCreate( 17, 0, 2, 0xffffffff7fffef28 )

ShmGet( 10, 17, 0, 2, 0xffffffff7fffede0 )

ShmCleanup SHM_PAGING_ADM_KEY

ShmCleanup( 18 )

ShmCreate( 18, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 18 ) = 0740 (octal)

ShmCleanup SHM_PXA_KEY

ShmCleanup( 6 )

ShmCreate( 6, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 6 ) = 0740 (octal)

ShmCleanup SHM_ENQ_TABLE_KEY

ShmCleanup( 34 )

ShmCreate( 34, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 34 ) = 0740 (octal)

ShmCleanup SHM_ENQID_KEY

ShmCleanup( 58 )

ShmCreate( 58, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 58 ) = 0740 (octal)

ShmCleanup SHM_VB_ADM_KEY

ShmCleanup( 7 )

ShmCreate( 7, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 7 ) = 0740 (octal)

ShmCleanup SHM_DB_POOL

ShmCleanup( 40 )

ShmCreate( 40, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_EM_ADM

ShmCleanup( 51 )

ShmCreate( 51, 0, 2, 0xffffffff7fffef28 )

ShmProtect( 51, 3 )

ShmCreate( 51, 0, 2, -> 0xffffffff70c00000 )

ShmCleanup SHM_MSBUF

ShmCleanup( 52 )

ShmCreate( 52, 0, 2, 0xffffffff7fffef28 )

ShmProtect( 52, 3 )

ShmCreate( 52, 0, 2, -> 0xffffffff71700000 )

ShmCleanup SHM_THRUN_ADM_KEY(th run adm)

ShmCleanup( 30 )

ShmCreate( 30, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 30 ) = 0740 (octal)

ShmCleanup SHM_JAVA

ShmCleanup( 70 )

ShmCreate( 70, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 70 ) = 0740 (octal)

ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)

ShmCleanup( 56 )

ShmCreate( 56, 0, 2, 0xffffffff7fffef28 )

ShmKeyPermission( 56 ) = 0740 (octal)

ShmCleanup SHM_POOL_0

ShmCleanup( 10 )

ShmCreate( 10, 0, 2, 0xffffffff7fffef28 )

ShmProtect( 10, 3 )

ShmCreate( 10, 0, 2, -> 0xffffffff74000000 )

ShmCleanup SHM_PROFILE

ShmCleanup( 57 )

ShmCreate( 57, 0, 2, 0xffffffff7fffef28 )

ShmProtect( 57, 3 )

ShmCreate( 57, 0, 2, -> 0xffffffff7b000000 )

MiCleanup:

ShmCleanup( 62 )

ShmCreate( 62, 0, 2, 0xffffffff7fffee78 )

ShmProtect( 62, 3 )

ShmCreate( 62, 0, 2, -> 0xfffffffe6a000000 )

MpiCleanup() -> 0

removing Semaphore-Management

removing request queue

ShmCleanup( 31 )

ShmCreate( 31, 0, 2, 0xffffffff7fffee78 )

ShmProtect( 31, 3 )

ShmCreate( 31, 0, 2, -> 0xffffffff71200000 )

closing connect handles (dgm + tcp)

DpDelSocketInfo: del info for socket 1 (type=2)

NiICloseHandle: shutdown and close hdl 1 / socket 8

DpDelSocketInfo: del info for socket 2 (type=1)

NiBufClose: clear extensions for hdl 2

NiBufSetStat: bufstat of hdl 2 changed from OK to OFF

NiICloseHandle: shutdown and close hdl 2 / socket 9

***LOG Q05=> DpHalt, DPStop ( 20048) [dpxxdisp.c 8707]

      • shutdown completed - server stopped ***

Good Bye .....

Accepted Solutions (0)

Answers (3)

Answers (3)

Former Member
0 Kudos

Hi,

I had a similar error, when installing SAP BW 3.1. on windows 2000 advanced server, oracle 9.2.0.6.

FRF-00007 Unable to open RFC connection.

ERROR 2006-12-04 07:03:21

FRF-00063 RFC logon failed with message: Failed……………………………………

To resolve this error you will need to upgrade your SAP kernel level.

1) Download the kernel. i.e. sapdbexe.sar and sapexe.sar.

2) uncar the files sapdbexe.sar and sapexe.sar using the sapcar.exe

On dos prompt go to the particular directory where u have downloaded the above sar files using "cd" command.

3) To Uncar the files use this command on dos prompt

SAPCAR -xvf <your-SAR-file> to uncar the files.

4) shut down sap using the MMC.

then in windows services.msc stop saposcol ,stop oracle service sapserviceSID and and the sapSID_##

5) Now just copy the new kernel files you have uncared above into the /usr/sap/SID/exe/run/ directory of your system

6) Start the services you stopped and start SAP using the MMC.

Now you should be able to logon. Sometimes the MMC shows the yellow status due to missing workprocess status. However the system should work fine.

Manmath Manjunath

Former Member
0 Kudos

Hi,

The first error which was shown here for unable to open an rfc connection was a simple problem. I also got this error while installing database instance,.the solution for this problem is :

The RFC connection works through gateway server service. but this gateway server service is started by dispatcher when the sap system comes up.

So, to solve this issue you must go to SAP mmc and try starting the SAP system from that.

I understand that with out database instance installation there is no point in starting the SAP system via mmc but it needs gateway service for some time to establish rfc connection. so try this solution and redo the installation again and it would go through.

I had implemented this on my own and it worked just a week back.

so,

All the best and Pls reward points if useful.

Regards,

Sree

Former Member
0 Kudos

Thanks

But I am not on windows but on solaris.

Any solution

roshantha

Former Member
0 Kudos

Hi,

I am sorry .. you just have to get into os level and exe folder of SAP kernel under run directory execute the startsap script.

This would start the SAP system.

Regards,

Pls reward points if useful.

Sree

Former Member
0 Kudos

Hi

I did that but dispacher was not comming up.See this is my 3rd time of installation.I go the same error.(with user <SID>adm i executed stopsap and startsap)

SAP started and i executed "R3trans -x" and i am getting (0000) but disp+work still died.

I have 30GB swap on my solaris 10 and 16GB prysical memory.

Pls help me on that.

Thanks

Roshantha

Former Member
0 Kudos

HI,

start ur sap using command 'Start' then ur RFC CONNECTION MAY BE ESTABLISHED .

try this it may help you

Regards

zia

Former Member
0 Kudos

Hi Roshantha,

Refer SAP Note 870652 - Installation of SAP in a Solaris 10 zone. If it is noe help fullsend us <b>dev_w0 </b>log file.

Regards,

Suraj

Message was edited by:

Suraj kumar