on 06-13-2007 12:54 PM
Hi Experts,
I was Posted This Thread in Most of the Modules like ABAP, Exchange Infrastructure.
But there is No Such Right Answers . So Finally I Got Idea to Post it in SAP NetWeaver Administrator Module.
For Creating a TS for Web AS ABAP For R/3 in SLD Automatically I Followed these Steps.
Log on to R/3 System
1) Go to SLDAPICUST TC
2)Entered Host name of the XI System ,Port, User As PIAPPLUSER, and Master PWD.
And Checked Primary Check Box.Saved
3) Goto RZ70 TC
4) Entered Host name And Gateway Service of XI System.And Activated
5) Clicked on Start Data Collection.
Here I Got the Error As <b>"RFC call failed : Error opening an RFC connection"</b>
Then
1) If I Executed SLD_NUC in SM59 With SAP XI Details Means It's giving Error Like as Follows "TheGetT1002 : error ( Msg - 10 not found )"
If I Executed SLD_NUC in SM59 With SAP R/3 Details Means It's giving Error Like as Follows "program SLD_NUC not registered"
Please let me Know the Solution
<b>Points will be Given If the Problem Is Solved</b>
Regards
Khanna
Hi
In SLDAPICUST , Create a new entry with Full qualified host name and PISUPER as user and make this as primary entry.
Thanks,
Tanuj
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Rajesh,
Have you confiured the DATA supplier bridge in Visual Admin?
For more help check this link as well:
/message/3539927#3539927 [original link is broken]
Regards.
Ruchit
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Rajesh,
Does the Central system of your SLD have J2EE stack ?
If it has there will be a visual adminstrator tool also. Anywayscheck this link as well:
http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Configuration/Post_Install_SLD_NW_2004s.pdf
Regards.
Ruchit.
Hi Ruchit,
I Have Done
1)"Configuring the SLD Bridge"
2) "Configuring Server and Persistence Parameters" From the PDF Which U Sent.
I Stopped And Started the SLD Server.
<b>
In SLDAPICUST TC I Given User Name PIAPPLUSER & PWD is Master PWD Is it Right ??</b>
But Again the Same Problem When I Executed RZ70.
<b>RFC call failed : Error opening an RFC connection.</b>
<b>Is there Any Setting to Do in Visual Administrator</b>
Please Give me Support to Solve this Problem.
Regards
Khanna
Hi Ruchit,
I have done these in SLD
1) Choose Administration ® Data Suppliers.
2)Set sld/active: to TRUE.
3)Choose Administration ® Profile.
4)From the Section dropdown box, select datasupplier.
I Entered the Following Info.
DataTrace: True
GatewayHost: XI Server Host name
GatewayService: sapgw01( XI Gateway )
This is Done with SLD.
And Finally Stopped And Started the SLD Server
Please let me Know If any thing more to Do.
Regards
Khanna
Hi Ruchit,
I will Tell u Clearly.
My Netweaver Server Host Name is EPNWSRV, GW Service is sapgw01
My SAP R/3 Server Host Name is SAPPLMIDES, GW Service is sapgw00
<b>When Ever I Did the Following with the SAP XI Machine, It's All Giving Success</b>
1) Doing SLDCHECK in XI
2) Set PIAPPLUSER As User in SLDAPICUST And Pwd Is Master PWD., Checked Primary Check box.
3)Doing RZ70 in XI then Result of this is TS will be Created in SLD
<b>When Ever I Did the Following with the SAP R/3 Machine, It's All Giving Errors
</b>
1) Doing SLDCHECK in R/3
2) Set PIAPPLUSER As User in SLDAPICUST And Pwd Is Master PWD., Checked Primary Check box.
3)Doing RZ70 in R/3 then Result of this is Giving the Error Which I Mentioned Earlier .
If U want More Clarification Please Let me Know.
Please Clear this Issue
Regards
Khanna
Hi Ruchit,
When I Check the SLD_NUC & SLD_UC in XI Means It's giving Success
When I Check the SLD_NUC & SLD_UC in R/3 Means It's giving Error.
<b>Detailed Errors of R/3 in SM59 TC for SLD_NUC & SLD_UC RFC's </b>
When I give the Gateway Host as -
epnwsrv,,,Service as -
sapgw01
Error is <b>"TheGetT1002 : error ( Msg - 10 not found )"</b>
When I give the Gateway Host as -
sapplmides,,,Service as -
sapgw00
Error is <b>"program SLD_NUC not registered"</b>
Please help me
Regards
Khanna
Hello Rajesh,
I would suggest that you implement Mantosh's suggestion as well for JCO RFC though I think it may work without that also. You need to create JCO RFC destinations for SLD_UC and SLD_NUC and give the details of R/3 server. You will also have to create a user with sufficient authorizations in R/3 for this.
Regards.
Ruchit.
Hi Ruchit,
I Have SAPSLDAPI,,, LCRSAPRFC, RFC's in Visual Admin with Gateway Host , Service, Program ID's.
The Thing is SAPSLDAPI,,, LCRSAPRFC, Destinations Are Working Fine in XI System With Gateway Host , Service ,,And the Program ID's Which r in Visual Admin.
But When I Check All these Destinations in R/3 With XI Server Details Gateway Host , Service ,,And the Program ID's Which r in Visual Admin means then only Getting Errors.
The Error is <b>"TheGetT1002 : error ( Msg - 10 not found )"</b>
Please Help me
Regards
Khanna
Hi,
check for SLDCHECK transaction in the R/3 System and plz send the output.
Thanks,
TANUJ
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Tanuj,
When I Executed SLDCHECK in R/3 System it's Giving The Following Wrror.
Exchange Infrastructure: Test LCR Connection
Properties of RFC destination SAPSLDAPI
RFC host: %%RFCSERVER%%
program id: SAPSLDAPI_NONUNICODE
gateway host: SAPPLMIDES
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
Error opening an RFC connection.
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host: %%RFCSERVER%%
program id: LCRSAPRFC_NONUNICODE
gateway host: sapplmides
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
Error opening an RFC connection.
Please Help me....
Regards
Khanna
User | Count |
---|---|
95 | |
11 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.