cancel
Showing results for 
Search instead for 
Did you mean: 

disp+work running but dialog Queue standstill

Former Member
0 Kudos

Hello,

The installation of SAP ERP IDES on MAXDB is stopped in the step "check DDIC password". The error message is "no rfc connection"...

In MMC i see the message "dispwork running but dialog Queue standstill"... If I restart the AS all is Ok for a few seconds than dispwork turn to yellow with the message above... (and if I wait a few minutes, it turns again green... but if I try to log-in I get again the yellow)

Any suggest?

Thanks

this is tracefile...

-


trc file: "dev_disp", trc level: 1, release: "700"

-


sysno 00

sid ID2

systemid 560 (PC with Windows NT)

relno 7000

patchlevel 0

patchno 75

intno 20050900

make: multithreaded, Unicode, optimized

pid 2540

Mon Jun 11 01:07:48 2007

kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)

length of sys_adm_ext is 572 bytes

      • SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (00 2540) [dpxxdisp.c 1237]

shared lib "dw_xml.dll" version 75 successfully loaded

shared lib "dw_xtc.dll" version 75 successfully loaded

shared lib "dw_stl.dll" version 75 successfully loaded

shared lib "dw_gui.dll" version 75 successfully loaded

shared lib "dw_mdm.dll" version 75 successfully loaded

rdisp/softcancel_sequence : -> 0,5,-1

use internal message server connection to port 3900

Mon Jun 11 01:07:53 2007

      • WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is not active

DpIPCInit2: start server >sapunip_ID2_00 <

DpShMCreate: sizeof(wp_adm) 18304 (1408)

DpShMCreate: sizeof(tm_adm) 3994272 (19872)

DpShMCreate: sizeof(wp_ca_adm) 24000 (80)

DpShMCreate: sizeof(appc_ca_adm) 8000 (80)

DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064

DpShMCreate: sizeof(comm_adm) 528064 (1048)

DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

DpShMCreate: sizeof(file_adm) 0 (72)

DpShMCreate: sizeof(vmc_adm) 0 (1440)

DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: SHM_DP_ADM_KEY (addr: 06040040, size: 4653368)

DpShMCreate: allocated sys_adm at 06040040

DpShMCreate: allocated wp_adm at 06041E40

DpShMCreate: allocated tm_adm_list at 060465C0

DpShMCreate: allocated tm_adm at 060465F0

DpShMCreate: allocated wp_ca_adm at 06415890

DpShMCreate: allocated appc_ca_adm at 0641B650

DpShMCreate: allocated comm_adm at 0641D590

DpShMCreate: system runs without file table

DpShMCreate: allocated vmc_adm_list at 0649E450

DpShMCreate: allocated gw_adm at 0649E490

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated ca_info at 0649E4C0

DpShMCreate: allocated wall_adm at 0649E4C8

MBUF state OFF

DpCommInitTable: init table for 500 entries

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> InitFreeList

<ES> block size is 1024 kByte.

Using implementation flat

<EsNT> Memory Reset disabled as NT default

<ES> 511 blocks reserved for free list.

ES initialized.

      • ERROR => DpIcmCreate: CreateProcess (2: No such file or directory) [dpntdisp.c 561]

***LOG Q0I=> DpIcmCreate, CreateProcess ( CreateProcess 2) [dpntdisp.c 563]

*****************************************************

  • Memory diagnostic *

*****************************************************

Systeminformation

-


Processor-Typ : Intel unknown

Processor-Count : 4

Operating System : NT 5.2, Build 3790

Service Pack : Service Pack 1

-


NT Pagefile Informations

-


Config. minimum size : 16384000 K

Config. maximum size : 16384000 K

Avail. maximum size : 16384000 K

Num

Pagefile

Min.Size

Max.Size

Avail.Max

Curr.Size







1

E:\pagefile1\pagefile.sys

4096000 K

4096000 K

4096000 K

4096000 K

2

E:\pagefile2\pagefile.sys

4096000 K

4096000 K

4096000 K

4096000 K

3

E:\pagefile3\pagefile.sys

4096000 K

4096000 K

4096000 K

4096000 K

4

E:\pagefile4\pagefile.sys

4096000 K

4096000 K

4096000 K

4096000 K

-


NT Task Manager Informations

-


Total Handles : 0

Total Threads : 0

Total Processes : 0

Commit Charge Total : 2824636 K

Commit Charge Limit : 19895828 K

Commit Charge Peak : 7292128 K

Phys.Memory Total : 0 K

Phys.Memory Available : 0 K

File Cache : 0 K

Kernel Memory Total : 0 K

Kernel Memory Paged : 0 K

Kernel Memory Nonpaged : 0 K

-


Memory usage of current process

-


Total virt.address space : 2097024 K

Avail.virt.address space : 1089976 K

Private Pages : 0 K

Total heap size : 12953 K

Virtual memory regions : 0 K

Uncommitted heap memory : 5500 K

Allocated heap memory : 7298 K

Moveable heap memory : 0 K

DDE shared heap memory : 0 K

-


Memory usage of all processes

-


PID

Image

Instance

Work.Set

WS Peak

Priv.Pages

PP Peak

Pg Fault









4

228 K

2068 K

0 K

0 K

22

360

smss.exe

244 K

452 K

120 K

160 K

1

608

winlogon.exe

3708 K

25392 K

10924 K

17172 K

175

684

services.exe

3304 K

22120 K

4284 K

13284 K

116

696

lsass.exe

3784 K

8124 K

7612 K

7640 K

18

856

svchost.exe

1020 K

2472 K

736 K

768 K

1

1152

svchost.exe

11604 K

26268 K

15024 K

22828 K

221

1552

spoolsv.exe

1892 K

4984 K

3484 K

3676 K

5

1752

svchost.exe

776 K

1984 K

488 K

524 K

0

1768

FileZilla Server.exe

356 K

2532 K

536 K

536 K

0

636

svchost.exe

2056 K

4456 K

2500 K

23148 K

17

240

winlogon.exe

2528 K

13472 K

5080 K

8900 K

68

144

rdpclip.exe

1224 K

2652 K

824 K

840 K

16

544

Explorer.EXE

8700 K

25548 K

7976 K

16912 K

5218

3436

Explorer.EXE

2240 K

21172 K

10892 K

13268 K

1288

2380

logon.scr

216 K

1524 K

320 K

320 K

0

2420

jusched.exe

56 K

1884 K

400 K

400 K

0

5564

jucheck.exe

244 K

4816 K

2316 K

2336 K

3

5068

serv.exe

1212 K

3596 K

2636 K

2684 K

1

2260

winlogon.exe

1512 K

7452 K

3244 K

3516 K

7

5524

rdpclip.exe

760 K

2680 K

800 K

816 K

2

5816

Explorer.EXE

2316 K

9532 K

5276 K

6632 K

336

3332

jusched.exe

56 K

1768 K

400 K

400 K

0

4588

jucheck.exe

112 K

4660 K

2308 K

2332 K

1

5668

taskmgr.exe

1944 K

3920 K

1036 K

1048 K

20

5580

kernel.exe

1687580 K

1689920 K

1837312 K

1863704 K

431

4772

sapstartsrv.exe

18832 K

21340 K

20476 K

99056 K

7

4908

mmc.exe

8908 K

21052 K

21216 K

21488 K

26

1820

DBMGui3.exe

14168 K

23412 K

14020 K

14020 K

17

5064

dbmsrv.exe

4440 K

15260 K

6412 K

16056 K

37

3488

cmd.exe

1568 K

1568 K

1396 K

1452 K

0

2928

msg_server.EXE

[MS] ID2_00

8108 K

8108 K

10228 K

10228 K

2

2540

disp+work.EXE

35864 K

35928 K

66848 K

66952 K

8

2100

igswd.EXE

[**] ID2_00

2884 K

3116 K

1420 K

1696 K

0

5744

igsmux.exe

12144 K

12144 K

13280 K

13280 K

3

6092

igspw.exe

2748 K

2748 K

2352 K

2352 K

0

3288

igspw.exe

2748 K

2748 K

2352 K

2352 K

0

4136

gwrd.EXE

3916 K

3916 K

6392 K

6392 K

1









Sum

1856000 K

2092920 K

DpProcCreate: ICM could not be started (rc = -1)

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]

***LOG Q0K=> DpMsAttach, mscon ( sapunip) [dpxxdisp.c 11586]

DpStartStopMsg: send start message (myname is >sapunip_ID2_00 <)

DpStartStopMsg: start msg sent

CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

CCMS: Initalizing shared memory of size 60000000 for monitoring segment.

CCMS: start to initalize 3.X shared alert area (first segment).

DpMsgAdmin: Set release to 7000, patchlevel 0

MBUF state PREPARED

MBUF component UP

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]

DpMsgAdmin: Set patchno for this platform to 75

Release check o.K.

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This patch is a DB patch or a kernel path?

Accepted Solutions (0)

Answers (2)

Answers (2)

IanSegobio
Advisor
Advisor
0 Kudos

Hello David,

The actual issue here is this:

Mon Feb 15 00:28:41 2016

*** ERROR => DpHdlDeadWp: W0 (pid 968) died (severity=0, status=0) [dpxxwp.c     1746]

     (...)

*** ERROR => DpHdlDeadWp: W15 (pid 2096) died (severity=0, status=0) [dpxxwp.c     1746]

*** DP_FATAL_ERROR => DpWPCheck: no more work processes

*** DISPATCHER EMERGENCY SHUTDOWN ***

The dispatcher is shutting down as there are no work processes left to work with. You have then to check the trace of the first one that died, which is the work process 0 (dev_w0).

There you will find the actual root cause for the problem.

Cheers,
Ian Segóbio.

Former Member
0 Kudos

Thanks, but how can do?, I am a newbie on SAP, thans in advanced !

isaias_freitas
Advisor
Advisor
0 Kudos

Hello Arquimedes,

This thread is from 2007 .

Maybe you could open a new thread?

Post the dev_w0 at the new thread, so we can analyze it and point you to the right direction.

Cheers!

Isaías

IanSegobio
Advisor
Advisor
0 Kudos

Do you still have the trace from the work process 0 for this timestamp? If yes, please attach to this thread, otherwise please do as follows:

1- Simulate the problem once more.
2- Check the dispatcher trace to confirm that the work processes are still crashing (same as highlighted in my comment).
3- Check what is the work process that dies first.
4- Get the its trace and attach to the thread.

*** Please use a new thread for this, as advised by my colleague.

Cheers,
Ian Segóbio.

Former Member
0 Kudos

Hi,

This may be due to memory problems. chk that java is active or not, r u able to login to abap stack ? did u changed the default password of ddic at the time of installtion ?

Regards

Umesh K

Former Member
0 Kudos

Apply the latest kernel

Hope this helps

For NW2004s Latest Kernel is 95

For NW2004 Latest Kernel is 175

Former Member
0 Kudos

in MMC in current status r3service -> see a red flag: java not active; what can I do for this?

How can I login to abap stack (I can't login to sap...).

Periodically the yellow circle in disp-work becomes green... but if I try to login it return yellow and I can't login...

Former Member
0 Kudos

Do u mean loggiing into SAP GUI?

Former Member
0 Kudos

Hello

occasionally the message near yellow falg change: "running but bad queue time 1680"... any suggestion?

PS (the message is shown during installation fase: "check DDIC password")

Thanks

Former Member
0 Kudos

>Do u mean loggiing into SAP GUI?

Yes!

Former Member
0 Kudos

Hi, I have a disp+work.exe problem post migration to VBox VM, Can you help me?

---------------------------------------------------

trc file: "dev_disp", trc level: 1, release: "721"

---------------------------------------------------

sysno      00

sid        PRB

systemid   562 (PC with Windows NT)

relno      7210

patchlevel 0

patchno    402

intno      20020600

make       multithreaded, Unicode, 64 bit, optimized

profile    \\PruebaSapPRB\sapmnt\PRB\SYS\profile\PRB_DVEBMGS00_PruebaSapPRB

pid        3172

kernel runs with dp version 139000(ext=121000) (@(#) DPLIB-INT-VERSION-139000-UC)

length of sys_adm_ext is 592 bytes

*** SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (00 3172) [dpxxdisp.c   1323]

    shared lib "dw_xml.dll" version 402 successfully loaded

    shared lib "dw_xtc.dll" version 402 successfully loaded

    shared lib "dw_stl.dll" version 402 successfully loaded

    shared lib "dw_gui.dll" version 402 successfully loaded

    shared lib "dw_mdm.dll" version 402 successfully loaded

    shared lib "dw_rndrt.dll" version 402 successfully loaded

    shared lib "dw_abp.dll" version 402 successfully loaded

    shared lib "dw_sym.dll" version 402 successfully loaded

    shared lib "dw_aci.dll" version 402 successfully loaded

rdisp/softcancel_sequence :  -> 0,5,-1

use internal message server connection to port 3901

rdisp/dynamic_wp_check : 1

rdisp/calculateLoadAverage : 1

Mon Feb 15 00:28:00 2016

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is not active

display_tcp_ip:    0

Set Check Logoff Flags to 0x0

DpIPCInit2: write dp-profile-values into sys_adm_ext

DpIPCInit2: start server >PruebaSapPRB_PRB_00                     <

DpShMCreate: sizeof(wp_adm)        40608    (2256)

DpShMCreate: sizeof(tm_adm)        5517056    (27448)

DpShMCreate: sizeof(wp_ca_adm)        64000    (64)

DpShMCreate: sizeof(appc_ca_adm)    64000    (64)

DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1392064/1392080

DpShMCreate: sizeof(comm_adm)        1392080    (2768)

DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

DpShMCreate: sizeof(slock_adm)        0    (296)

DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

DpShMCreate: sizeof(file_adm)        0    (80)

DpShMCreate: sizeof(vmc_adm)        0    (2160)

DpShMCreate: sizeof(wall_adm)        (41664/42896/64/192)

DpShMCreate: sizeof(gw_adm)    48

DpShMCreate: sizeof(j2ee_adm)    3952

DpShMCreate: SHM_DP_ADM_KEY        (addr: 0000000000210050, size: 7180576)

DpShMCreate: allocated sys_adm at 0000000000210060

DpShMCreate: allocated wp_adm_list at 00000000002130B0

DpShMCreate: allocated wp_adm at 00000000002132A0

DpShMCreate: allocated tm_adm_list at 000000000021D150

DpShMCreate: allocated tm_adm at 000000000021D1A0

DpShMCreate: allocated wp_ca_adm at 00000000007600B0

DpShMCreate: allocated appc_ca_adm at 000000000076FAC0

DpShMCreate: allocated comm_adm at 000000000077F4D0

DpShMCreate: system runs without slock table

DpShMCreate: system runs without file table

DpShMCreate: allocated vmc_adm_list at 00000000008D32B0

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated gw_adm at 00000000008D3360

DpShMCreate: allocated j2ee_adm at 00000000008D33A0

DpShMCreate: allocated ca_info at 00000000008D4320

DpShMCreate: allocated wall_adm at 00000000008D43B0

DpCommAttachTable: attached comm table (header=000000000077F4D0/ft=000000000077F4E0)

DpSysAdmIntInit: initialize sys_adm

rdisp/test_roll : roll strategy is DP_NORMAL_ROLL

dia token check not active (10 token)

MBUF state OFF

DpCommInitTable: init table for 500 entries

DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm

Mon Feb 15 00:28:01 2016

rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> EsILock: use Mutex for locking

<ES> InitFreeList

<ES> block size is 4096 kByte.

<ES> Info: em/initial_size_MB( 8115MB) not multiple of em/blocksize_KB( 4096KB)

<ES> Info: em/initial_size_MB rounded up to 8116MB

Using implementation view

<EsNT> Using memory model view.

<EsNT> Memory Reset disabled as NT default

<ES> 2028 blocks reserved for free list.

ES initialized.

mm.dump: set maximum dump mem to 192 MB

mm.dump: set global maximum dump mem to 192 MB

EsRegisterEmCheck: Register EmGetEsHandles at 000007F778CEB1E0

DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE

MPI: dynamic quotas disabled.

MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c   1709]

***LOG Q0K=> DpMsAttach, mscon ( PruebaSapPRB) [dpxxdisp.c   12944]

MBUF state LOADING

DpStartStopMsg: send start message (myname is >PruebaSapPRB_PRB_00                     <)

DpStartStopMsg: start msg sent to message server o.k.

CCMS: Initialized monitoring segment of size 60000000.

CCMS: Initialized CCMS Headers in the shared monitoring segment.

15.02.2016 04:58:01.137 PID=3172, TID=1752    SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime:  +199 millisec (max +0). Slept 1000 millisec, Qpc elapsed: +1000 millisec, WindowsUtc elapsed +801 millisec. SapTime-WindowsUtcTime=+1 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=+1110 millisec (*).

CCMS: Checking Downtime Configuration of Monitoring Segment.

CCMS: AlMsUpload called by wp 1024.

CCMS: AlMsUpload successful for E:\usr\sap\PRB\DVEBMGS00\log\ALMTTREE.DAT (755 MTEs).

CCMS: start to initalize 3.X shared alert area (first segment).

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]

MBUF state ACTIVE

DpWpBlksLow: max wp blocks in queue is 800 (80 %)

MBUF component UP

DpMsgProcess: 1 server in MBUF

DpAppcBlksLow: max appc blocks in queue is 500 (50 %)

15.02.2016 04:58:01.951 PID=3172, TID=1752    SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime:  +200 millisec (max +199). Slept 1015 millisec, Qpc elapsed: +1014 millisec, WindowsUtc elapsed +814 millisec. SapTime-WindowsUtcTime=+1 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=+1311 millisec (*).

Mon Feb 15 00:28:02 2016

15.02.2016 04:58:02.765 PID=3172, TID=1752    SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime:  +201 millisec (max +200). Slept 1016 millisec, Qpc elapsed: +1014 millisec, WindowsUtc elapsed +813 millisec. SapTime-WindowsUtcTime=+1 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=+1512 millisec (*).

Mon Feb 15 00:28:04 2016

15.02.2016 04:58:04.381 PID=3172, TID=1752    SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime:  +202 millisec (max +201). Slept 1016 millisec, Qpc elapsed: +1015 millisec, WindowsUtc elapsed +813 millisec. SapTime-WindowsUtcTime=+1 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=+1912 millisec (*).

Mon Feb 15 00:28:41 2016

*** ERROR => DpHdlDeadWp: W0 (pid 968) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W1 (pid 4020) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W2 (pid 4004) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W3 (pid 4084) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W4 (pid 3372) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W5 (pid 1568) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W6 (pid 3560) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W7 (pid 3844) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W8 (pid 996) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W9 (pid 2708) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W10 (pid 3104) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W11 (pid 3408) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W12 (pid 3740) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W13 (pid 3820) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W14 (pid 3736) died (severity=0, status=0) [dpxxwp.c     1746]

*** ERROR => DpHdlDeadWp: W15 (pid 2096) died (severity=0, status=0) [dpxxwp.c     1746]

*** DP_FATAL_ERROR => DpWPCheck: no more work processes

*** DISPATCHER EMERGENCY SHUTDOWN ***

increase tracelevel of WPs

NiWait: sleep (10000ms) ...

NiISelect: timeout 10000ms

NiISelect: maximum fd=1057

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Feb 15 00:28:50 2016

15.02.2016 04:58:50.250 PID=3172, TID=1752    SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime:  -296 millisec (max +202). Slept 1016 millisec, Qpc elapsed: +1016 millisec, WindowsUtc elapsed +1312 millisec. SapTime-WindowsUtcTime=+1 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=+1450 millisec (*).

Mon Feb 15 00:28:54 2016

NiISelect: TIMEOUT occured (10000ms)

dump system status

Workprocess Table (long)            Mon Feb 15 04:58:54 2016

========================

No Type  Pid    Status  Cause Start Rstr  Err Sem Time Program          Cl  User         Action                    Table

-------------------------------------------------------------------------------------------------------------------------------

0 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

1 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

2 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

3 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

4 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

5 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

6 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

7 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

8 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

9 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

10 UPD       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

11 BTC       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

12 BTC       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

13 BTC       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

14 SPO       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

15 UP2       -1 Ended         no    no     1   0    0                                    NO_ACTION                          

Dispatcher Queue Statistics            Mon Feb 15 04:58:54 2016

===========================

+------+--------+--------+--------+------------+------------+

|  Typ |    now |   high |    max | writes     |  reads     |

+------+--------+--------+--------+------------+------------+

| NOWP |      0 |      4 |   2000 |          5 |          5 |

+------+--------+--------+--------+------------+------------+

|  DIA |      3 |      3 |   2000 |          3 |          0 |

+------+--------+--------+--------+------------+------------+

|  UPD |      0 |      0 |   2000 |          0 |          0 |

+------+--------+--------+--------+------------+------------+

|  ENQ |      0 |      0 |   2000 |          0 |          0 |

+------+--------+--------+--------+------------+------------+

|  BTC |      0 |      0 |   2000 |          0 |          0 |

+------+--------+--------+--------+------------+------------+

|  SPO |      0 |      0 |   2000 |          0 |          0 |

+------+--------+--------+--------+------------+------------+

|  UP2 |      0 |      0 |   2000 |          0 |          0 |

+------+--------+--------+--------+------------+------------+

max_rq_id        8

wake_evt_udp_now    0

wake events          total     6,  udp     2 ( 33%),  shm     4 ( 66%)

since last update    total     6,  udp     2 ( 33%),  shm     4 ( 66%)

DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %

DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %

DpGetLoadAverage: la15[1] = 0.033333 / -1.000000 %

Dispatcher Load Statistics

+------+---------+---------+---------+

|  Typ |     LA1 |     LA5 |    LA15 |

+------+---------+---------+---------+

|  DIA |   0.000 |   0.000 |   0.033 |

+------+---------+---------+---------+

DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %

DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %

DpGetLoadAverage: la15[2] = 0.000000 / -1.000000 %

|  UPD |   0.000 |   0.000 |   0.000 |

+------+---------+---------+---------+

DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %

DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %

DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %

|  ENQ |   0.000 |   0.000 |   0.000 |

+------+---------+---------+---------+

DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %

DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %

DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %

|  BTC |   0.000 |   0.000 |   0.000 |

+------+---------+---------+---------+

DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %

DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %

DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %

|  SPO |   0.000 |   0.000 |   0.000 |

+------+---------+---------+---------+

DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %

DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %

DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %

|  UP2 |   0.000 |   0.000 |   0.000 |

+------+---------+---------+---------+

Dump of tm_adm structure:            Mon Feb 15 04:58:54 2016

=========================

Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)

Workprocess Comm. Area Blocks            Mon Feb 15 04:58:54 2016

=============================

Slots: 1000, Used: 1, Max: 2

+------+--------------+----------+-------------+

|   id | owner        |   pid    | eyecatcher  |

+------+--------------+----------+-------------+

|    0 | DISPATCHER   |       -1 | 0xdeadbeef |

NiWait: sleep (5000ms) ...

NiISelect: timeout 5000ms

NiISelect: maximum fd=1057

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Feb 15 00:29:00 2016

NiISelect: TIMEOUT occured (5000ms)

DpHalt: shutdown server >PruebaSapPRB_PRB_00                     < (normal)

DpJ2eeDisableRestart

DpMBufRead: read server list from MBUF (1 entries)

DpMBufMod: name [PruebaSapPRB_PRB_00                     ], types 187 state 3 (0x0 0x0 0x0 0x0)

DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)

AdGetSelfIdentRecord: >                                                                           <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 60

AdCallRegisteredCvtToExt: opcode 60 call 000007F77834CC70

AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

DpWpBlksLow: wp_blks_in_queue/threshold/max = 1/800/1000

DpLockWpBlkEx: lock wp ca_blk 1

make DISP owner of wp_ca_blk 1

DpRqIPutIntoQ: put elem in queue DIA, elems=4

DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)

MBUF server state SHUTDOWN

DpModState: change state STARTING -> SHUTDOWN

NiBufSend starting

NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIModState: change state to SHUTDOWN

DpModState: change server state from STARTING to SHUTDOWN

DpHalt: switch off Shared memory profiling

ShmProtect( 57, 3 )

ShmProtect(SHM_PROFILE, SHM_PROT_RW

ShmProtect( 57, 1 )

ShmProtect(SHM_PROFILE, SHM_PROT_RD

DpWakeUpWps: wake up all wp's

DpHalt: stop work processes

DpHalt: stop gateway

killing process (3480) (SOFT_KILL)

DpHalt: stop icman

killing process (3656) (SOFT_KILL)

DpHalt: terminate gui connections

DpHalt: wait for end of work processes

DpHalt: wait for end of gateway

[DpProcDied] Process lives  (PID:3480  HANDLE:840)

DpHalt: waiting for termination of gateway ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1057

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Feb 15 00:29:01 2016

15.02.2016 04:59:01.983 PID=3172, TID=1752    SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime:  -305 millisec (max -296). Slept 1000 millisec, Qpc elapsed: +1000 millisec, WindowsUtc elapsed +1305 millisec. SapTime-WindowsUtcTime=-1 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-1205 millisec (*).

Mon Feb 15 00:29:02 2016

NiISelect: TIMEOUT occured (1000ms)

*** ERROR => [DpProcDied] Process died  (PID:3480  HANDLE:840  rc:0x0) [dpnttool2.c  147]

DpHalt: wait for end of icman

[DpProcDied] Process lives  (PID:3656  HANDLE:848)

DpHalt: waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1057

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Feb 15 00:29:03 2016

15.02.2016 04:59:03.403 PID=3172, TID=1752    SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime:  -420 millisec (max -305). Slept 1000 millisec, Qpc elapsed: +1000 millisec, WindowsUtc elapsed +1420 millisec. SapTime-WindowsUtcTime=-1 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-1625 millisec (*).

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:3656  HANDLE:848)

DpHalt: waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1057

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Feb 15 00:29:04 2016

15.02.2016 04:59:04.844 PID=3172, TID=1752    SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime:  -426 millisec (max -420). Slept 1016 millisec, Qpc elapsed: +1014 millisec, WindowsUtc elapsed +1440 millisec. SapTime-WindowsUtcTime=-2 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-2051 millisec (*).

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:3656  HANDLE:848)

DpHalt: waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1057

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Feb 15 00:29:06 2016

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:3656  HANDLE:848)

DpHalt: waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1057

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Mon Feb 15 00:29:07 2016

NiISelect: TIMEOUT occured (1000ms)

*** ERROR => [DpProcDied] Process died  (PID:3656  HANDLE:848  rc:0x0) [dpnttool2.c  147]

DpStartStopMsg: send stop message (myname is >PruebaSapPRB_PRB_00                     <)

DpStartStopMsg: Write AD_STARTSTOP message with type=  0, name=PruebaSapPRB_PRB_00 , sapsysnr= 0, hostname=PruebaSapPRB                                                   

AdGetSelfIdentRecord: >                                                                           <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 60

AdCallRegisteredCvtToExt: opcode 60 call 000007F77834CC70

AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K

AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 4

AdCallRegisteredCvtToExt: opcode 4 call 000007F77836F6B0

AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K

DpConvertRequest: net size = 189 bytes

NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes

NiBufSend starting

NiIWrite: hdl 17 sent data (wrt=562,pac=1,MESG_IO)

MsINiWrite: sent 562 bytes

MsISndTypeOnce: send msg (ms hdr/msg 110/452 bytes) to MSG_SERVER, type 1

DpStartStopMsg: stop msg sent to message server o.k.

NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes

NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes

NiIRead: hdl 17 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 17

NiBufReceive starting

MsINiRead: received 274 bytes

MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 17 recv would block (errno=EAGAIN)

NiIRead: read for hdl 17 timed out (0ms)

DpHalt: more messages from the message server

DpHalt: send keepalive to synchronize with the message server

NiBufSend starting

NiIWrite: hdl 17 sent data (wrt=114,pac=1,MESG_IO)

MsINiWrite: sent 114 bytes

MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name           MSG_SERVER, type 0, key -

MsSndName: MS_NOOP ok

Send 4 bytes to MSG_SERVER

NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes

NiIRead: hdl 17 recv would block (errno=EAGAIN)

NiIPeek: peek successful for hdl 17 (r)

NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes

NiIRead: hdl 17 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 17

NiBufReceive starting

MsINiRead: received 114 bytes

MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER          , typ 0, key -

Received 4 bytes from MSG_SERVER                             

Received opcode MS_NOOP from msg_server, reply MSOP_OK

MsOpReceive: ok

MsISendKeepalive : keepalive sent to message server

NiIRead: hdl 17 recv would block (errno=EAGAIN)

Mon Feb 15 00:29:09 2016

15.02.2016 04:59:09.127 PID=3172, TID=1752    SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime:  -427 millisec (max -426). Slept 1015 millisec, Qpc elapsed: +1014 millisec, WindowsUtc elapsed +1441 millisec. SapTime-WindowsUtcTime=-3 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-3318 millisec (*).

NiIPeek: peek for hdl 17 timed out (r; 1000ms)

NiIRead: read for hdl 17 timed out (1000ms)

DpHalt: no more messages from the message server

DpHalt: sync with message server o.k.

DpHalt: detach from message server

***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   13344]

NiBufSend starting

NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIDetach: send logout to msg_server (PruebaSapPRB / 3901)

MsIDetach: call exit function

DpMsShutdownHook called

NiBufISelUpdate: new MODE -- (r-) for hdl 17 in set0

SiSelNSet: set events of sock 836 to: ---

NiBufISelRemove: remove hdl 17 from set0

SiSelNRemove: removed sock 836 (pos=2)

SiSelNRemove: removed sock 836

NiSelIRemove: removed hdl 17

DpDelSocketInfo: del info for nihdl 17 (pos/type=2/4)

MBUF state OFF

AdGetSelfIdentRecord: >                                                                           <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 60

AdCallRegisteredCvtToExt: opcode 60 call 000007F77834CC70

AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCallRegisteredCvtToExt: opcode 40

AdCallRegisteredCvtToExt: opcode 40 call 000007F778983CB0

AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K

DpWpBlksLow: wp_blks_in_queue/threshold/max = 2/800/1000

DpLockWpBlkEx: lock wp ca_blk 2

make DISP owner of wp_ca_blk 2

DpRqIPutIntoQ: put elem in queue DIA, elems=5

DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 12)

MBUF component DOWN

NiICloseHandle: shutdown and close hdl 17/sock 836

NiBufIClose: clear extension for hdl 17

MsIDetach: detach MS-system (PruebaSapPRB / 3901)

DpHalt: cleanup EM

EsCleanup( )

EsCleanup ....

EmCleanup() -> 0

Es2Cleanup: Cleanup ES2

***LOG Q05=> DpHalt, DPStop ( 3172) [dpxxdisp.c   11819]

DpHalt: Good Bye .....