Sap Netweaver 2004 ABAP trial version com.sap.installshield.maxdb.maxdb...

[Former Member]

Hi Experts,

Installing Sap NetWeaver 2004 ABAP trial version, always I obtain the following error:

(May 14, 2009 11:03:15 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.

(May 14, 2009 11:03:15 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME_1/jp/CONFIG1/Temp/MaxDBSAPNWPREV.log")

STACK_TRACE: 22

ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME_1/jp/CONFIG1/Temp/MaxDBSAPNWPREV.log")

at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)

at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)

at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)

at java.lang.reflect.Method.invoke(Unknown Source)

at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)

at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)

at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)

at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)

at java.lang.Thread.run(Unknown Source)

My laptop does not have 2 of the prerequisites of the installation:

1) Only has 512 MB RAM

2) I try to install it under WIN XP HOME (No Professional edition)

Can anyone help me, do you think this is due the lack of RAM, or the Operating System?

Thanks in advance for your help.

Joan Puigserver

[athavanraja]

have you seen the trouble shooting guide (for 601 error ocde)

https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37

[Former Member]

Hi Joan,

my PC have only 512 MB with XP-Home too. -> Installation errorfree.

Ulf Stolzki.

[Former Member]

Hi Ulf:

Thank you very much for your quick answer, Now already I know that it is not necessary to buy more memory.

I will review all the steps of the installation...

In any case if somebody knows where it can be the error, it would be thankful for its aid.

Thanks, Joan

[roland_mallmann]

Hi,

according to the error output you copied in the message:

"

ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME_1/jp/CONFIG1/Temp/MaxDBSAPNWPREV.log")

"

Please show us the end of the mentioned log file <b>and</b> check if you have a SDBINST logfile named 'MaxDB*.log' on your disk (in the Rundirectory/wrk of your MaxDB installation).

We need more information regarding which exact error SDBINST (the MaxDB Software Installer) faced.

Regards,

Roland

[Former Member]

Hi Roland,

In order to isolate the possible problems, I erased all the data of the computer, and now I do not have the file. I am going to install SAP Netweaver and I will review the log file that you comment.

Thanks for your help,

Joan

[Former Member]

Hi Again:

The end of file MaxDBSAPNWPREV.log is:

Tue Jun 05 20:34:22 CEST 2007 MaxDB sdbinst: -

---

Tue Jun 05 20:34:23 CEST 2007 MaxDB sdbinst:

Tue Jun 05 20:34:23 CEST 2007 MaxDB sdbinst: start real extraction of "C:/sapdb/NSP/_tempLocation/SQLDBC76.TGZ"

Tue Jun 05 20:34:23 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 pgm/

Tue Jun 05 20:34:23 CEST 2007 MaxDB sdbinst: extracting: -rwxr-xr-x 1073152 2006-11-21 00:02:25 pgm/libSQLDBC76.dll

Tue Jun 05 20:34:23 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/

Tue Jun 05 20:34:23 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/sqldbc/

Tue Jun 05 20:34:23 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/sqldbc/lib/

Tue Jun 05 20:34:23 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 80738 2006-11-21 00:02:25 sdk/sqldbc/lib/libSQLDBC76.lib

Tue Jun 05 20:34:23 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 symbols/

Tue Jun 05 20:34:23 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 3951616 2006-11-21 00:02:25 symbols/libSQLDBC76.pdb

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: checking unpacked archive... ok

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: installation of MaxDB Software finished successfully Tu, Jun 05, 2007 at 20:34:23

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: creating database NSP...

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: ERROR: Backup check for 'C:\sapdb\NSP\_tempLocation\load\load_datasave' failed:

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: installation exited abnormally at Tu, Jun 05, 2007 at 20:34:23

Tue Jun 05 20:34:24 CEST 2007 MaxDB: Error during call to sdbinst, rc= 1

Tue Jun 05 20:34:24 CEST 2007 MaxDB: Done with call_sdbinst

Tue Jun 05 20:34:24 CEST 2007 MaxDB: rc of sdbinst = 1

Tue Jun 05 20:34:25 CEST 2007 MaxDB: Start of CallSdbuninst

Tue Jun 05 20:34:25 CEST 2007 MaxDB: IndepProgPath: c:/sapdb/programs

Tue Jun 05 20:34:25 CEST 2007 MaxDB: dbmcli path: c:/sapdb/programs/pgm/dbmcli.exe

Tue Jun 05 20:34:25 CEST 2007 MaxDB: Calling check for db_enum in case of an abort

Tue Jun 05 20:34:25 CEST 2007 MaxDB: nsp doesn't exist. Nothing to do !

Tue Jun 05 20:34:25 CEST 2007 MaxDB: rc of Method: 3

Tue Jun 05 20:34:25 CEST 2007 MaxDB: IndepProgPath = c:/sapdb/programs

MaxDB: dbmcli_path = c:/sapdb/programs/pgm/dbmcli.exe

MaxDB: Database instance to drop: :NSP:

MaxDB: Instroot of NSP is: null

MaxDB: sdbuninst_option = :3

MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing

Tue Jun 05 20:34:25 CEST 2007 MaxDB: End of CallSdbuninst

Tue Jun 05 20:34:25 CEST 2007 MaxDB: End of uninstallation

-

---

I think that followed all the steps of the installation and I do not see where it can be the error. somebody can help me please?

Thanks in advance, Joan

[roland_mallmann]

Hm,

to me, it seems that this is the current cause of the installation not going according to plan:

"

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: ERROR: Backup check for 'C:\sapdb\NSP\_tempLocation\load\load_datasave' failed:

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave

"

SDBINST breaks off after that.

Can you tell me if that directory & file exists on your machine?

Thanks & regards,

Roland

[Former Member]

Hi Roland,

The directory and file don't exists,

[roland_mallmann]

Hm,

how much room (diskspace) is left on your C:\ drive?

Regards,

Roland

[Former Member]

Hi Roland:

Next I detail the most relevant data for the installation, I hope that they serve to clarify the problem:

Hard disk space: 26 GB

Ram: Phisical memory 512 MB (480 MB Available) < = Out of system requirements

Operating System: Win XP Home Edition, 2002 version, service pack 2 <= Out of system requirements

Hosts file:

127.0.0.1 localhost <= It is this entry necessary?

10.10.0.10 ACERJP

Following entries in services file be added by installation process:

sapmsNSP 3600/tcp

sql6 7210/tcp

sapdbni72 7269/tcp

Look back adapter:

IP: 10.10.0.10

Subnet mask: 255.255.255.0

Other questions:

Do you recommend to me deactivate the firewall during the installation process, in order to isolate possible problems?

There is necessary to install Microsoft .NET Framework 2.0 ?

Best regards, Joan

[roland_mallmann]

Hi again,

I've asked a colleague of the installation team and he also said that the main point of the issue is this:

"

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: ERROR: Backup check for 'C:\sapdb\NSP\_tempLocation\load\load_datasave' failed:

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave

Tue Jun 05 20:34:24 CEST 2007 MaxDB sdbinst: installation exited abnormally at Tu, Jun 05, 2007 at 20:34:23

"

This file (the backup) <b>must</b> be created during the installation, it is being extracted, together with the MaxDB software.

If this error occurs, the software (and the backup) will be deinstalled again, this is also visible in the output you showed us.

Please retry the installation and wait and see if this file is being created. Because this backup can be rather large, it might take a while.

Regards,

Roland

[Former Member]

Hi Roland,

You were right, indeed the folder and file C:\sapdb\NSP\_tempLocation\load\load_datasave.gz, is created during the installation process, although when it finishes, they erase. In any case, <b>we have taken a step ahead</b>. The difference between this installation and the previous one are that I have deactivated my firewall and the antivirus. I do not know if this can be the cause.

Now the error happens in the following phase:

Mon Jun 11 23:55:38 CEST 2007 MaxDB sdbinst: starting installation phase of package Webtools 7.6.00.32 32 bit

Mon Jun 11 23:55:38 CEST 2007 MaxDB sdbinst: -

---

Mon Jun 11 23:55:38 CEST 2007 MaxDB sdbinst:

Mon Jun 11 23:55:38 CEST 2007 MaxDB sdbinst: start real extraction of "C:/sapdb/NSP/_tempLocation/SDBWEB.TGZ"

Mon Jun 11 23:55:38 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-07-06 21:31:37 config/

Mon Jun 11 23:55:38 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 3090 2006-07-06 19:15:45 config/mime.types

Mon Jun 11 23:55:38 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 3167 2006-07-06 17:37:15 config/wa.reg

.../... and so on until:

Mon Jun 11 23:56:07 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 1756160 2006-07-06 19:24:40 symbols/wahttp.pdb

Mon Jun 11 23:56:07 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 2116608 2006-07-06 19:15:59 symbols/wapi.pdb

Mon Jun 11 23:56:07 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 3402752 2006-07-06 19:20:18 symbols/webdbm.pdb

Mon Jun 11 23:56:07 CEST 2007 MaxDB sdbinst: checking unpacked archive... ok

Mon Jun 11 23:56:08 CEST 2007 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format

Mon Jun 11 23:56:09 CEST 2007 MaxDB sdbinst: error occured while executing wahttp -i

Mon Jun 11 23:56:09 CEST 2007 MaxDB sdbinst: wahttp -i: SAP DB WWW service installation failed - El servicio especificado ya existe. [1073]

Mon Jun 11 23:56:09 CEST 2007 MaxDB sdbinst: installation exited abnormally at Mo, Jun 11, 2007 at 23:56:08

Mon Jun 11 23:56:09 CEST 2007 MaxDB: Error during call to sdbinst, rc= 1

Mon Jun 11 23:56:09 CEST 2007 MaxDB: Done with call_sdbinst

Mon Jun 11 23:56:09 CEST 2007 MaxDB: rc of sdbinst = 1

Mon Jun 11 23:56:09 CEST 2007 MaxDB: Start of CallSdbuninst

Mon Jun 11 23:56:09 CEST 2007 MaxDB: IndepProgPath: c:/sapdb/programs

Mon Jun 11 23:56:09 CEST 2007 MaxDB: dbmcli path: c:/sapdb/programs/pgm/dbmcli.exe

Mon Jun 11 23:56:10 CEST 2007 MaxDB: Calling check for db_enum in case of an abort

Mon Jun 11 23:56:10 CEST 2007 MaxDB: nsp doesn't exist. Nothing to do !

Mon Jun 11 23:56:10 CEST 2007 MaxDB: rc of Method: 3

Mon Jun 11 23:56:10 CEST 2007 MaxDB: IndepProgPath = c:/sapdb/programs

MaxDB: dbmcli_path = c:/sapdb/programs/pgm/dbmcli.exe

MaxDB: Database instance to drop: :NSP:

MaxDB: Instroot of NSP is: null

MaxDB: sdbuninst_option = :3

MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing

Mon Jun 11 23:56:10 CEST 2007 MaxDB: End of CallSdbuninst

Mon Jun 11 23:56:10 CEST 2007 MaxDB: End of uninstallation

-

---

You would be able to interpret this error?

Best regards, Joan

Message was edited by:

Joan Puigserver Lara

[roland_mallmann]

Hi again,

this time the problem is the following:

"

Mon Jun 11 23:56:08 CEST 2007 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format

Mon Jun 11 23:56:09 CEST 2007 MaxDB sdbinst: error occured while executing wahttp -i

Mon Jun 11 23:56:09 CEST 2007 MaxDB sdbinst: wahttp -i: SAP DB WWW service installation failed - El servicio especificado ya existe. [1073]

"

I don't speak spanish, but it seems to me that the SAP DB WWW service could not be installed, because it already exists?

Regards,

Roland

Edit:

<b>

You can delete the SAP DB Web Server Service sapdbwww by entering this command:

<installation_path_web_tools>/pgm/wahttp.exe –u

</b>

[Former Member]

Hi Roland,

I restored my system from an image that not contains any reference to SAP NETWEAVER, I repeat all the same steps, and I had again the same firsrt error:

Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst: starting installation phase of package SQLDBC 76 7.6.00.36 32 bit

Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst: -

---

Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst:

Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst: start real extraction of "C:/sapdb/NSP/_tempLocation/SQLDBC76.TGZ"

Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 pgm/

Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst: extracting: -rwxr-xr-x 1073152 2006-11-21 00:02:25 pgm/libSQLDBC76.dll

Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/

Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/sqldbc/

Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/sqldbc/lib/

Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 80738 2006-11-21 00:02:25 sdk/sqldbc/lib/libSQLDBC76.lib

Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 symbols/

Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 3951616 2006-11-21 00:02:25 symbols/libSQLDBC76.pdb

Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: checking unpacked archive... ok

Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: installation of MaxDB Software finished successfully We, Jun 13, 2007 at 00:08:10

Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: creating database NSP...

Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format

Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: ERROR: Backup check for 'C:\sapdb\NSP\_tempLocation\load\load_datasave' failed:

Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave

Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: installation exited abnormally at We, Jun 13, 2007 at 00:08:10

Wed Jun 13 00:08:12 CEST 2007 MaxDB: Error during call to sdbinst, rc= 1

Wed Jun 13 00:08:12 CEST 2007 MaxDB: Done with call_sdbinst

Wed Jun 13 00:08:12 CEST 2007 MaxDB: rc of sdbinst = 1

Wed Jun 13 00:08:12 CEST 2007 MaxDB: Start of CallSdbuninst

Wed Jun 13 00:08:12 CEST 2007 MaxDB: IndepProgPath: c:/sapdb/programs

Wed Jun 13 00:08:12 CEST 2007 MaxDB: dbmcli path: c:/sapdb/programs/pgm/dbmcli.exe

Wed Jun 13 00:08:12 CEST 2007 MaxDB: Calling check for db_enum in case of an abort

Wed Jun 13 00:08:12 CEST 2007 MaxDB: nsp doesn't exist. Nothing to do !

Wed Jun 13 00:08:12 CEST 2007 MaxDB: rc of Method: 3

Wed Jun 13 00:08:12 CEST 2007 MaxDB: IndepProgPath = c:/sapdb/programs

MaxDB: dbmcli_path = c:/sapdb/programs/pgm/dbmcli.exe

MaxDB: Database instance to drop: :NSP:

Really I am confused, I believe that I'm going to dedicate a few days to reflect, on this subject.

In any case, I want to you to thank for your aid.

Kindly, Joan

[Former Member]

> Hi Roland,

>

> I restored my system from an image that not contains

> any reference to SAP NETWEAVER, I repeat all the same

> steps, and I had again the same firsrt error:

>

>

> Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst: starting

> installation phase of package SQLDBC 76 7.6.00.36 32

> bit

> Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst:

> -

---

> -

---

> Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst:

> Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst: start

> real extraction of

> "C:/sapdb/NSP/_tempLocation/SQLDBC76.TGZ"

> Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst:

> extracting: drwxr-xr-x 0 2006-11-21

> 01:13:02 pgm/

> Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst:

> extracting: -rwxr-xr-x 1073152 2006-11-21

> 00:02:25 pgm/libSQLDBC76.dll

> Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst:

> extracting: drwxr-xr-x 0 2006-11-21

> 01:13:02 sdk/

> Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst:

> extracting: drwxr-xr-x 0 2006-11-21

> 01:13:02 sdk/sqldbc/

> Wed Jun 13 00:08:10 CEST 2007 MaxDB sdbinst:

> extracting: drwxr-xr-x 0 2006-11-21

> 01:13:02 sdk/sqldbc/lib/

> Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst:

> extracting: -rw-rr 80738 2006-11-21

> 00:02:25 sdk/sqldbc/lib/libSQLDBC76.lib

> Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst:

> extracting: drwxr-xr-x 0 2006-11-21

> 01:13:02 symbols/

> Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst:

> extracting: -rw-rr 3951616 2006-11-21

> 00:02:25 symbols/libSQLDBC76.pdb

> Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: checking

> unpacked archive... ok

> Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst:

> installation of MaxDB Software finished successfully

> We, Jun 13, 2007 at 00:08:10

> Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: creating

> database NSP...

> Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst:

> getInstalledReleasesWin(): wrong version format

> Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: ERROR:

> Backup check for

> 'C:\sapdb\NSP\_tempLocation\load\load_datasave'

> failed:

> ed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst: File not

> found: C:\sapdb\NSP\_tempLocation\load\load_datasave

> Wed Jun 13 00:08:11 CEST 2007 MaxDB sdbinst:

> installation exited abnormally at We, Jun 13, 2007

> at 00:08:10

> Wed Jun 13 00:08:12 CEST 2007 MaxDB: Error during

> call to sdbinst, rc= 1

> Wed Jun 13 00:08:12 CEST 2007 MaxDB: Done with

> call_sdbinst

> Wed Jun 13 00:08:12 CEST 2007 MaxDB: rc of sdbinst =

> 1

> Wed Jun 13 00:08:12 CEST 2007 MaxDB: Start of

> CallSdbuninst

> Wed Jun 13 00:08:12 CEST 2007 MaxDB: IndepProgPath:

> c:/sapdb/programs

> Wed Jun 13 00:08:12 CEST 2007 MaxDB: dbmcli path:

> c:/sapdb/programs/pgm/dbmcli.exe

> Wed Jun 13 00:08:12 CEST 2007 MaxDB: Calling check

> for db_enum in case of an abort

> Wed Jun 13 00:08:12 CEST 2007 MaxDB: nsp doesn't

> exist. Nothing to do !

> Wed Jun 13 00:08:12 CEST 2007 MaxDB: rc of Method: 3

> Wed Jun 13 00:08:12 CEST 2007 MaxDB: IndepProgPath =

> c:/sapdb/programs

> MaxDB: dbmcli_path =

> c:/sapdb/programs/pgm/dbmcli.exe

> MaxDB: Database instance to drop: :NSP:

>

> Really I am confused, I believe that I'm going to

> dedicate a few days to reflect, on this subject.

>

> In any case, I want to you to thank for your aid.

> Kindly, Joan

Hi All,

The problem was with the Windows XP Home, since I have repeated the installation on Windows XP Professional without no problem.

Although I have to extend the memory to 1 GB, because it had 512 and it ran very slow.

Thank you very much to all by your aid, specially to Roland Mallmann.

Greetings, Joan

[Former Member]

Hi,

I met the exactly the same problem with SAPNW7.0ABAPTrialSP12. My OS is windows XP with 26G free disk space and 1.5 physical memory.

Any clue?

Rice

[roland_mallmann]

Hi Rice,

I'd like to suggest to you to open your own thread and post any relevant error message output in your thread for all to see.

Don't forget to also post your used MaxDB version (incl. Build-nr.).

Regards,

Roland