cancel
Showing results for 
Search instead for 
Did you mean: 

Dispatcher Running But Dialog queue Standstill

Former Member
0 Kudos

Hi

u00A0

u00A0I m facing some problem on my SAP ECC5.0 server I m using SQL 2005

Some time my server is not responding in SAP MMC my dispatcher is get stuck then after restarting SAP system dispatcher will work but after

Some time this problem comes again in SAP MMC its show dispatcher running but dialog standstill.

u00A0

Fellow is the log of dev_w0 plz help :

-


trc file: "dev_w0", trc level: 1, release: "640"

-


*

  • ACTIVE TRACE LEVEL 1

  • ACTIVE TRACE COMPONENTS all, M

*

B

B Tue May 29 12:09:18 2007

B create_con (con_name=R/3)

B Loading DB library 'E:\usr\sap\RJC\SYS\exe\run\dbmssslib.dll' ...

B Library 'E:\usr\sap\RJC\SYS\exe\run\dbmssslib.dll' loaded

B Version of 'E:\usr\sap\RJC\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.152)

B New connection 0 created

M sysno 00

M sid RJC

M systemid 560 (PC with Windows NT)

M relno 6400

M patchlevel 0

M patchno 109

M intno 20020600

M make: multithreaded, ASCII

M pid 1880

M

M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1880) [dpxxdisp.c 1158]

I MtxInit: -2 0 0

M DpSysAdmExtCreate: ABAP is active

M

M Tue May 29 12:09:19 2007

M DpShMCreate: sizeof(wp_adm) 6624 (828)

M DpShMCreate: sizeof(tm_adm) 2379840 (11840)

M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)

M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)

M DpShMCreate: sizeof(comm_adm) 192000 (384)

M DpShMCreate: sizeof(vmc_adm) 0 (364)

M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)

M DpShMCreate: SHM_DP_ADM_KEY (addr: 06A70040, size: 2665448)

M DpShMCreate: allocated sys_adm at 06A70040

M DpShMCreate: allocated wp_adm at 06A717D0

M DpShMCreate: allocated tm_adm_list at 06A731B0

M DpShMCreate: allocated tm_adm at 06A731D8

M DpShMCreate: allocated wp_ca_adm at 06CB8218

M DpShMCreate: allocated appc_ca_adm at 06CBC868

M DpShMCreate: allocated comm_adm_list at 06CBDFD8

M DpShMCreate: allocated comm_adm at 06CBDFF0

M DpShMCreate: allocated vmc_adm_list at 06CECDF0

M DpShMCreate: system runs without vmc_adm

M DpShMCreate: allocated ca_info at 06CECE18

M DpShMCreate: allocated wall_adm at 06CECE20

X EmInit: MmSetImplementation( 2 ).

X <ES> client 0 initializing ....

X Using implementation flat

M <EsNT> Memory Reset disabled as NT default

X ES initialized.

M calling db_connect ...

C Thread ID:3448

C Thank You for using the SLOLEDB-interface

C Using dynamic link library 'E:\usr\sap\RJC\SYS\exe\run\dbmssslib.dll'

C dbmssslib.dll patch info

C patchlevel 0

C patchno 152

C patchcomment Connection check on (0,0) (988711)

C np:(local) connection used on RJCPRD

C CopyLocalParameters: dbuser is 'rjc'

C Using Provider SQLNCLI

C OpenOledbConnection: MARS property was set successfully.

C Provider Release:9.00.2047.00

C Using Provider SQLNCLI

C OpenOledbConnection: MARS property was set successfully.

C

C Tue May 29 12:09:20 2007

C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5448000 bytes), total 32168052 bytes

C Using shared procedure name cache RJCPRD_RJCRJC_RJC_MEM initialized by another process.

C Connected to db server : [RJCPRD] server_used : [np:(local)], dbname: RJC, dbuser: rjc

C pn_id:RJCPRD_RJCRJC_RJC

C Using MARS (on sql 9.0)

B Connection 0 opened (DBSL handle 0)

B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost

B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070529 120919 RJCPRD

C The IRow interface is supported by this OLEDB provider

M db_connect o.k.

M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif

I

I Tue May 29 12:09:22 2007

I MtxInit: 0 0 0

M SHM_PRES_BUF (addr: 0B340040, size: 4400000)

M SHM_ROLL_AREA (addr: 38870040, size: 268435456)

M SHM_PAGING_AREA (addr: 103B0040, size: 134217728)

M SHM_ROLL_ADM (addr: 089D0040, size: 2678942)

M SHM_PAGING_ADM (addr: 0B780040, size: 525344)

M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0B810040

M ThCreateNoBuffer index size: 3000 elems

M ThCreateVBAdm allocated 7424 bytes (50 server) at 08850040

X EmInit: MmSetImplementation( 2 ).

X <ES> client 0 initializing ....

X Using implementation flat

X ES initialized.

B db_con_shm_ini: WP_ID = 0, WP_CNT = 8, CON_ID = -1

B dbtbxbuf: Buffer TABL (addr: 183C00C8, size: 30000000, end: 1A05C448)

B dbtbxbuf: Buffer TABLP (addr: 1A0600C8, size: 10240000, end: 1AA240C8)

B dbexpbuf: Buffer EIBUF (addr: 0FA600D0, size: 4194304, end: 0FE600D0)

B dbexpbuf: Buffer ESM (addr: 1AA300D0, size: 4194304, end: 1AE300D0)

B dbexpbuf: Buffer CUA (addr: 1AE400D0, size: 3072000, end: 1B12E0D0)

B dbexpbuf: Buffer OTR (addr: 1B1300D0, size: 4194304, end: 1B5300D0)

M rdisp/reinitialize_code_page -> 0

M icm/accept_remote_trace_level -> 0

M rdisp/no_hooks_for_sqlbreak -> 0

M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

S *** init spool environment

S initialize debug system

T Stack direction is downwards.

T debug control: prepare exclude for printer trace

T new memory block 1B628400

S spool kernel/ddic check: Ok

S using table TSP02FX for frontend printing

S 1 spool work process(es) found

S frontend print via spool service enabled

S printer list size is 150

S printer type list size is 50

S queue size (profile) = 300

S hostspool list size = 3000

S option list size is 30

S found processing queue enabled

S found spool memory service RSPO-RCLOCKS at 23620098

S doing lock recovery

S setting server cache root

S found spool memory service RSPO-SERVERCACHE at 23620290

S using messages for server info

S size of spec char cache entry: 165020 bytes (timeout 100 sec)

S size of open spool request entry: 1152 bytes

S immediate print option for implicitely closed spool requests is disabled

A

A -PXA--


A PXA INITIALIZATION

A PXA: Fragment Size too small: 36 MB, reducing # of fragments

A System page size: 4kb, total admin_size: 4544kb, dir_size: 4520kb.

A Attached to PXA (address 488A0040, size 150000K)

A abap/pxa = shared protect gen_remote

A PXA INITIALIZATION FINISHED

A -PXA--


A

A ABAP ShmAdm attached (addr=687F5000 leng=20955136 end=69BF1000)

A >> Shm MMADM area (addr=68B5D0C0 leng=134752 end=68B7DF20)

A >> Shm MMDAT area (addr=68B7E000 leng=17248256 end=69BF1000)

A RFC Destination> destination RJCPRD_RJC_00 host RJCPRD system RJC systnr 0 (RJCPRD_RJC_00)

A RFC Options> H=RJCPRD,S=00,d=1

C The IRow interface is supported by this OLEDB provider

A RFC FRFC> fallback activ but this is not a central instance.

A

A RFC rfc/signon_error_log = -1

A RFC rfc/dump_connection_info = 0

A RFC rfc/dump_client_info = 0

A RFC rfc/cp_convert/ignore_error = 1

A RFC rfc/cp_convert/conversion_char = 23

A RFC rfc/wan_compress/threshold = 251

A RFC rfc/recorder_pcs not set, use defaule value: 1

A RFC rfc/delta_trc_level not set, use default value: 0

A RFC rfc/no_uuid_check not set, use default value: 0

A RFC abap/SIGCHILD_default not set, use default value: 0

A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0

A RFC Method> initialize RemObjDriver for ABAP Objects

A Hotpackage version: 19

M ThrCreateShObjects allocated 8352 bytes at 08C70040

N SsfSapSecin: putenv(SECUDIR=E:\usr\sap\RJC\DVEBMGS00\sec): ok

N

N =================================================

N === SSF INITIALIZATION:

N ===...SSF Security Toolkit name SAPSECULIB .

N ===...SSF trace level is 0 .

N ===...SSF library is E:\usr\sap\RJC\SYS\exe\run\sapsecu.dll .

N ===...SSF hash algorithm is SHA1 .

N ===...SSF symmetric encryption algorithm is DES-CBC .

N ===...sucessfully completed.

N =================================================

N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.

N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.

W =================================================

W === ipl_Init() called

B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):

B max_blocking_factor = 50, max_in_blocking_factor = 255,

B min_blocking_factor = 5, min_in_blocking_factor = 10,

B prefer_union_all = 1, prefer_union_for_select_all = 0,

B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,

B convert AVG = 1, alias table FUPD = 0,

B escape_as_literal = 0, opt GE LE to BETWEEN = 0,

B select * =0x00, character encoding =SBCS / []:X,

B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,

B rule_fae->0, concat_fae->0, concat_fae_or->0

W ITS Plugin: Path dw_gui

W ITS Plugin: Description ITS Plugin - ITS rendering DLL

W ITS Plugin: sizeof(SAP_UC) 1

W ITS Plugin: Release: 640, [6400.0.109.20020600]

W ITS Plugin: Int.version, [31]

W ITS Plugin: Feature set: [11]

W ===... Calling itsp_Init in external dll ===>

W === ipl_Init() returns 0, ITSPE_OK: OK

W =================================================

E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume RJCPRD_RJC_00

E Replication is disabled

E EnqCcInitialize: local lock table initialization o.k.

E EnqId_SuppressIpc: local EnqId initialization o.k.

E EnqCcInitialize: local enqueue client init o.k.

M MBUF info for hooks: MS component UP

M ThSetEnqName: set enqname by server list

M ThISetEnqname: enq name = >RJCPRD_RJC_00 <

E

E *************** EnqId_EN_ActionAtMsUpHook ***************

E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally

E

E *************** ObjShMem_CheckAuthoritativeEnqId ***************

E Checking authoritative EnqId from EnqSrv into ObjShMem

E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...

E EnqId.EnqTabCreaTime = -999

E EnqId.RandomNumber = -999

E ReqOrd.TimeInSecs = -999

E ReqOrd.ReqNumberThisSec = -999

E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...

E EnqId.EnqTabCreaTime = -999

E EnqId.RandomNumber = -999

E ReqOrd.TimeInSecs = -999

E ReqOrd.ReqNumberThisSec = -999

E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem

E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue

E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)

E -SHMEM--


E EnqId: EnqTabCreaTime/RandomNumber = 29.05.2007 12:09:22 1180420762 / 3468

E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 29.05.2007 12:09:22 1180420762 / 2

E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 29.05.2007 12:09:22 1180420762 / 1

E Status: STATUS_OK

E -


M ThActivateServer: state = STARTING

L BtcSysStartRaise: Begin

L Raise event SAP_SYSTEM_START with parameter <RJCPRD_RJC_00 >

L BtcSysStartRaise: End

C

C Tue May 29 12:10:32 2007

C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 15

M program canceled

M reason = soft cancel

M user = SAPSYS

M client = 000

M terminal = 192.168.50.36

M report =

C

C Tue May 29 12:10:37 2007

C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 15

M program canceled

M reason = soft cancel

M user = SAPSYS

M client = 000

M terminal = 192.168.50.36

M report =

M

M Tue May 29 12:10:40 2007

M in_ThErrHandle: 1

M ThSoftCancel: no login (step 4, th_errno 50, action 1, level 1)

M Entering ThSetStatError

M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_ROLLBACK

M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_ROLLBACK

M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_ROLLBACK

M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_ROLLBACK

M ThCallHooks: call hook >rsts_after_rollback< for event AFTER_ROLLBACK

M ThCallHooks: call hook >ThNoResetMutex< for event AFTER_ROLLBACK

M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_ROLLBACK

M ThCallHooks: call hook >ab_SosShmBeforeCommit< for event BEFORE_COMMIT

M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT

M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT

M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT

M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT

M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT

M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT

M ThCallHooks: call hook >rsts_storage_free< for event AFTER_STORAGE_FREE

M ThCallHooks: call hook >db_x_short_mem_sync_point< for event AFTER_STORAGE_FREE

M ThIErrHandle: Entering ThErrHdlUser

H *** ERROR => HTTP> ab_HttpCleanUpExt: ThPlgGetOutbuf failed (10)

[file: abhttpio.c, line: 7003]

{A3296E67-0475-435F-9F0B-79E690442ABF}

[abhttpio.c 21134]

M *** ERROR => ThPlgCancel: MpiCancel failed (14) [thxxplg.c 1654]

M *** ERROR => ThPlgSendOOB: MpiWriteOutOfBand <5> failed (14) [thxxplg.c 3420]

M ThCallHooks: call hook >ITSP: EndOfSession< for event BEFORE_SESSION_END

M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_END

M ThCallHooks: call hook >DbgBeforeSessionEnd< for event BEFORE_SESSION_END

M ThCallHooks: call hook >RtmClearSession< for event BEFORE_SESSION_END

M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_END

M ThCallHooks: call hook >ab_SosShmBeforeCommit< for event BEFORE_COMMIT

M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT

M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT

M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT

M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT

M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT

M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT

M ThCallHooks: call hook >rsts_storage_free< for event AFTER_STORAGE_FREE

M ThCallHooks: call hook >db_x_short_mem_sync_point< for event AFTER_STORAGE_FREE

M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH

M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH

M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH

M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH

N

N Tue May 29 12:16:54 2007

N login/password_change_for_SSO : 1 -> 1

B

B Tue May 29 12:17:07 2007

B dbmyclu : info : my major identification is 3232248356, minor one 0.

B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.

B dbmyclu : info : my uuid is 0A824471D4B27C4898D077A46003C92C.

B dbmyclu : info : current optimistic cluster level: 3

B dbmyclu : info : pessimistic reads set to 2.

B

B Tue May 29 12:24:40 2007

B create_con (con_name=+DBO+0030)

B New connection 1 created

B Connect to +DBO+0030 as with MSSQL_SERVER=rjcprd MSSQL_DBNAME=RJC OBJECT_SOURCE=rjc

C Thread ID:3448

C dbmssslib.dll patch info

C patchlevel 0

C patchno 152

C patchcomment Connection check on (0,0) (988711)

C np:(local) connection used on RJCPRD

C Connected to db server : [RJCPRD] server_used : [np:(local)], dbname: RJC, dbuser: dbo

C pn_id:RJCPRD_RJC_RJC

B Connection 1 opened (DBSL handle 1)

B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost

B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070529 120919 RJCPRD

B 000 001 +DBO+0030 000000001 ACTIVE NO NO NO 004 255 255 20070529 122440 RJCPRD

S

S Tue May 29 12:25:38 2007

S found spool memory service RSPO-ACTIONS at 23624B18

B

B Tue May 29 12:51:38 2007

B table logging switched off for all clients

B

B Tue May 29 13:09:40 2007

B create_con (con_name=+DBO+0030)

B New connection 2 created

B Connect to +DBO+0030 as with MSSQL_SERVER=rjcprd MSSQL_DBNAME=RJC OBJECT_SOURCE=rjc

C Thread ID:3448

C dbmssslib.dll patch info

C patchlevel 0

C patchno 152

C patchcomment Connection check on (0,0) (988711)

C np:(local) connection used on RJCPRD

C Connected to db server : [RJCPRD] server_used : [np:(local)], dbname: RJC, dbuser: dbo

C pn_id:RJCPRD_RJC_RJC

B Connection 2 opened (DBSL handle 2)

B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost

B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070529 120919 RJCPRD

B 000 001 +DBO+0030 000000010 ACTIVE YES NO NO 004 255 255 20070529 122440 RJCPRD

B 000 002 +DBO+0030 000000011 ACTIVE NO NO NO 004 255 255 20070529 130940 RJCPRD

B

B Tue May 29 13:29:38 2007

B Disconnected from connection con_da={+DBO+0030,11,2}

B

B Tue May 29 14:09:40 2007

B Connect to +DBO+0030 as with MSSQL_SERVER=rjcprd MSSQL_DBNAME=RJC OBJECT_SOURCE=rjc

C Thread ID:3448

C dbmssslib.dll patch info

C patchlevel 0

C patchno 152

C patchcomment Connection check on (0,0) (988711)

C np:(local) connection used on RJCPRD

C Connected to db server : [RJCPRD] server_used : [np:(local)], dbname: RJC, dbuser: dbo

C pn_id:RJCPRD_RJC_RJC

B Connection 2 opened (DBSL handle 2)

B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost

B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070529 120919 RJCPRD

B 000 001 +DBO+0030 000000024 ACTIVE YES NO NO 004 255 255 20070529 122440 RJCPRD

B 000 002 +DBO+0030 000000025 ACTIVE NO NO NO 004 255 255 20070529 140940 RJCPRD

B

B Tue May 29 14:29:38 2007

B Disconnected from connection con_da={+DBO+0030,25,2}

B

B Tue May 29 15:09:39 2007

B Connect to +DBO+0030 as with MSSQL_SERVER=rjcprd MSSQL_DBNAME=RJC OBJECT_SOURCE=rjc

C Thread ID:3448

C dbmssslib.dll patch info

C patchlevel 0

C patchno 152

C patchcomment Connection check on (0,0) (988711)

C np:(local) connection used on RJCPRD

C Connected to db server : [RJCPRD] server_used : [np:(local)], dbname: RJC, dbuser: dbo

C pn_id:RJCPRD_RJC_RJC

B Connection 2 opened (DBSL handle 2)

B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost

B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070529 120919 RJCPRD

B 000 001 +DBO+0030 000000038 ACTIVE YES NO NO 004 255 255 20070529 122440 RJCPRD

B 000 002 +DBO+0030 000000039 ACTIVE NO NO NO 004 255 255 20070529 150939 RJCPRD

B

B Tue May 29 15:29:38 2007

B Disconnected from connection con_da={+DBO+0030,39,2}

B

B Tue May 29 16:14:38 2007

B Disconnected from connection con_da={+DBO+0030,51,1}

If it is problem with kernal patch then plz tell me the which is the latrest karnel patch and DB patch.

Regards

Abullais

u00A0

Accepted Solutions (0)

Answers (1)

Answers (1)

Former Member
0 Kudos

Hi all,

We had 46c before. Now upgraded to ECC6. We had this same problem in earlier release and expected that after the upgrade it would stop giving such error. But still we are getting the same in ECC6 application servers.

All the wps will be assigned with users which will show in the MMC and action column with "Roll in/Roll out" and the semaphore column are filled up with value 33. We frequently get this abnormal state of dispatcher "Running but dialog queue stand still". restarting SAP from MMC would solve the issue.

Please help us to resolve this issue.

regards,

jinesh

Former Member
0 Kudos

I have had the same problem with E-Recruiting system.. ECC 6.0...

M *** ERROR => ThPlgFatalErrHandler: ThPlgGetOutbuf failed (10) [thxxplg.c 5286]

M *** ERROR => ThPlgCancel: MpiCancel failed (14) [thxxplg.c 1929]

M *** ERROR => ThPlgSendOOB: MpiWriteOutOfBand <100221> failed (14) [thxxplg.c 3728]

SAP Note Number: 1027208 has some info. about it.but unclear.

Former Member
0 Kudos

If you suspect your dispatcher is acting up...wouldn't the dev_disp file have some more info?