on 05-23-2007 9:50 AM
Hi All,
<b>under spro>>CA>>doc mgmt>> gen data>>define workstation appln>>define template fr oiginal files</b>
what is significance of this?
also,
<b>Can anyone send me doc on title block settings stepwise.</b>
screenshots would be gr8 help.
can some1 tell me where is user exit?
im using Inventor 11 sap integrator provided by cideon...
with points
Niranjan
Hey Rehman
u r tooo good man
points given
i was thinkin on same lines for my 1st query
still 1 query how can the template will be taken from SAP to CAD.
i mean ll this be done at the time of saving doc or checkin.
can u pl tell me the steps to follow to be successful in templatization.
tell me @ second
can u send any doc or screens on CAD Title Block.
niranjandandekar@hotmail.com is the mail id
once again thanx fr help...
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
> Hey Rehman
>
> u r tooo good man
>
> points given
>
> i was thinkin on same lines for my 1st query
> still 1 query how can the template will be taken from
> SAP to CAD.
> i mean ll this be done at the time of saving doc or
> checkin.
> can u pl tell me the steps to follow to be successful
> in templatization.
>
>
> tell me @ second
>
> can u send any doc or screens on CAD Title Block.
> niranjandandekar@hotmail.com is the mail id
>
> once again thanx fr help...
Hi Niranjan,
You are not taking a template from SAP to CAD.
In CAD Interface always you should work with CDESK i.e through CADDESK.
It is imperative to use the transaction CAD Desktop in Order to establish the link between the Cad drawing and Document Info Record(DIR ) while the drawing needs to be updated for title block entries.
The Following Procedure for working with CAD for Titleblock updation.
1. Open ACAD/Inventor , you see the SAP icon on the ACAD menu (top right)
2. Opend SAPview of CADDESKTOP i.e. AutoCAD/Inventor> SAP>CAD DESKTOP--->SAP VIEW.
3. Choose Working Directory for the Cad desktop log files.
Prefarably ( C:\Sap WorkDir\Acad or Inventor)
4. Enter DIR key (doc # + doc type ) you wish to edit
Result: SAPView tab is populated with DIR
5. Choose SAP View -> Originals-> Edi Originals
6. A Successful checkout shows ("File Copied")
7. choose "Execute" to edit the Original file. & Edit the drawing.
8. Save
This is the procedure you should follow to work with SAP-CAD when you have CAD Interface only this will update your Title block and likage will be maintained.
But you should use Function Module to mention all the Technical names of the Fields you need to maintain in the Title Block.
The in CFG File you need to map those fields.
i.e. in path
Cfg-File\LocalCfg\TbkMapping
Here you need to map all the required fields (DIR Fields in maintained in Function Module & the Template (ACAD/Inventor) Attributes)
Hope you are Clear.
Regards
Rehman
<b>REWARD POINTS IF USEFUL</b>
Hey thanks for the steps,
im following same procedure for existing doc..after step 8 i shd check in right?
but what about new files...
for new;
i have to login to SAP >>create drawing >>save it>> den chek in the doc right?
<b>what cud be the possible entries in Cfg-File\LocalCfg\TbkMapping?</b>
thanks
Niranjan
Hi Niranjan,
<b>what cud be the possible entries in Cfg-File\LocalCfg\TbkMapping?</b>
<b>KEY -
VALUE</b>
TITLE -
DOC_DESCRIPTION
HELD----
DOC_LABORATORY
DWGNO----
DOC_DOCUMENTNUMBER
SHTNO----
DOC_DOCUMENTPART
ISS----
DOC_DOCUMENTVERSION
etc
etc........ as per the mapping required and attributes in Titleblock.
Regards
Rehman
Reward If Useful.
thanx Rehman
points awarded again...
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Niranjan,
The functional module which is used to call the title block is
CAD_GET_TITLE_BLOCK_DATA
Regards
Rehman
<b>Reward Your Points</b>
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Niranjan,
<b>under spro>>CA>>doc mgmt>> gen data>>define workstation appln>>define template fr oiginal files</b>
what is significance of this?
Here if you click on "New Entries" you go to the new screen, where you have to Select the Doc type, Application, Source File OR Source Document.
You have to mention the Source File path i.e. Template of ACAD/Inventor/WRD for that particular "DOCUMENT TYPE"
or you can create one DIR with attached original template to that DIR and mention its DIR key at "Source Document"
Whenever you Create a New DIR with that "DOCUMENT TYPE" then this TEMPLATE MENTIONED EITHER AT SOURCE FILE PATH <OR> at SOURCE DOCUMENT will be called.
So the Template will be a common for this Document Type..
<u><b>Scenario</b></u>
For Example Document type say "GA" (General Assembly) will have a AutoCAD template of A0 Size with TitleBlock
and Document Type say "PD"(Part Drawing) will have a AutoCAD Template of A4 size with Fixed Title Block.
Similarly it can be for any applications (WRD, ACD, INV, etc)
Hope you are clear.
Regards
Rehman
Reward Points if Useful
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
89 | |
8 | |
7 | |
4 | |
4 | |
3 | |
3 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.