cancel
Showing results for 
Search instead for 
Did you mean: 

SLD Data Suppler: Forbidden

former_member205400
Active Participant
0 Kudos

I created my SLD using the SLD_Post_Install.pdf but I am getting the following message in the Vis Admin tool.

It says: Failed to collect SLD data. Failed to send HTTP data: 403: Forbidden. Please check if the target SLD system is availalbe and the SLD bridge is started there.

I set the HTTP and the CIM settings for the node SLD Data Supplier. I didnt ck https or mess with the certificate thing.

Accepted Solutions (1)

Accepted Solutions (1)

asif_hirani
Active Participant
0 Kudos

Hi Michael

I had written those steps assuming u r using Netweaver 2004 WAS 6.4 in mind

However I have also verified by having a look at SLD of 2004s ie WAS 7.0 now its almost similar

1) plz note that importing CIM model is essential for configuring u r SLD its not automatically imported u will have to click on

SLD--->Administration->content (import,export& Backup ) option->click it

The browser displays the Import Selection screen.----> Next to the Import File field, choose Browse.

To import the component information data, navigate to the following file:
<server>\usr\sap\<SAPSID>\SYS\global\sld\model\cr_content.zip (MS Windows) and then choose Open.

after u have imported CIM model u can proceed as mentioned above in my steps

and for ur query that u cannot see

RFC Gateway

server : localhostname

service : sapgw00

ya thats the difference of two version I also Could not see that option in 2004s actually it is shown just below Update local SLD ( sld / activate 😞 true in 2004

so thats fine anyways those values used to come Prepopulated in 2004 so I guess they elimnated it from the screen in 2004s as we dont change those values and hence the SET BUTTON also eliminated in 2004s

and ur other query

Namespace : sld/active SLD hostname objectserver : localhost

is shown on the same screen of SLD data supplier below ( sld / activate 😞 true (right at the Bottom )

u could also see it in Administration link of SLD at the Bottom

and yes in 2004s u cannot see DATA SUPPLIER BRIDGE : Running status for ur SLD data supplier

even i Cannot see it on my 2004s sld it was shown in 2004 sld so thats again fine u can proceed ahead

finally in Visual admin specify " localhost " only in ur host name entries , if ur using local SLD then write " localhost " only and not mycompany.com as same thing happend to me once it was not working when I entered fully qualified Domain name but when i entered localhost it worked fine

and try to use administartor user if u dont get test sucessfull with SLD_user

1)HTTP settings

Host name : localhost (not mycompany.com )

port : 50000

2)RFC settings

gateway host : localhost (not mycompany.com )

gateway service/port : 50000

save

3)CIM client generation Settings

host : localhost

port : 50000

user : administrator

dont check HTTPS

save

click CIMClient Test BUTTON

u should receive CIMOMClient object generation & connection test Sucessful message

I think u should be able to solve ur problem now

Regards

Asif

Answers (4)

Answers (4)

former_member205400
Active Participant
0 Kudos

Awesome!

I think I had 2 problems, 1) the docs say that the CIM IMport is done the first time it is loaded, but I did it manually and it imported over 75K objects I think, and 2) after I finished the configuration was that the user I put in did not have the correct security setting.

After I changed the user to j2ee_admin it worked fine.

Thanks for all your help!

former_member205400
Active Participant
0 Kudos

Asif,

Thank you. I appreciate it. I should have mentioned we have Netweaver 2004s.

I have the following questions. Please see my comments. I'm not sure we are talking about the same version.

>>just check below mentioned things, here I am assuming that u have already >>imported CIM model in SLD administration Import , export and Backup options

No I didn't import it. I thought i read that it was uploaded the first time the SLD was started, but I'll do it.

>>1) click on Administration link

>>verify that SLD status : Running if not start ur SLD server

Done!

>>2) on the same screen of Admintsration click Data Supplier Bridge

>>if u have configured SLD on the same server i.e if SLD is LOCAL

>>then set Update local SLD ( sld / activate 😞 true

>>or if SLD is on some other server then add SLD explicitly by specifying

>>that SLD servers credetinals

Done!

>>3) ensure u have following entries in the

>>RFC Gateway

>>server : localhostname

>>service : sapgw00

Under Profile -> Server Settings (pulldown) I have the fully qualified host name, e.g. mycompany.com

Were you talking about the RZ70 setting? RZ70 has the fullly qualified hostname and gateway and all boxes are checked.

>>4) click : SET BUTTON

I'm not finding this button. What screen is it on?

>>5)check if this entry is visible

>>Namespace : sld/active SLD hostname objectserver : hostname

What screen are you referring to? Profile -> Server Settings (pulldown)

>>6)Finally ensure that u have set DATA SUPPLIER BRIDGE : Running

Profile -> datasupplier (pulldown) has the fully qualified hostname and gateway.

Where does this show "running"

>>1)HTTP settings

>>Host name : localhost (assuming that u are using local SLD )

>>port : 50000 ( default http port it may be different for u depends )

>>user : Administrator ( j2ee admininstrator )

>>password : ******

>>dont check HTTPS option

>>save

Done, except the user is not j2ee_admin, its the sldds_user and the host is the fully qualified hostname, e.g. mycompany.com

>>2)RFC settings

>>gateway host : localhost

>>gateway service/port : 50000

>>save

Done, except the host is the fully qualified hostname, e.g. mycompany.com

>>3)CIM client generation Settings

>>host : localhost

>>port : 50000

>>user : administrator

>>dont check HTTPS

>>save

Done, except the user is not j2ee_admin, its the sldds_user and the host is the fully qualified hostname, e.g. mycompany.com

>>click CIMClient Test BUTTON

>>u should receive CIMOMClient object generation & connection test Sucessful >>message

I need to do this!!

What do you think?

asif_hirani
Active Participant
0 Kudos

HI Michael

Logon to ur SLD as Administrator http:<host>:<port default 50000>/sld

just check below mentioned things, here I am assuming that u have already imported CIM model in SLD administration Import , export and Backup options

1) click on Administration link

verify that SLD status : Running if not start ur SLD server

2) on the same screen of Admintsration click Data Supplier Bridge

if u have configured SLD on the same server i.e if SLD is LOCAL

then set Update local SLD ( sld / activate 😞 true

or if SLD is on some other server then add SLD explicitly by specifying that SLD servers credetinals

3) ensure u have following entries in the

RFC Gateway

server : localhostname

service : sapgw00

4) click : SET BUTTON

5)check if this entry is visible

Namespace : sld/active SLD hostname objectserver : hostname

6)Finally ensure that u have set DATA SUPPLIER BRIDGE : Running

And then Make correct entries for SLD DATA Supplier in ur Visual Admin

logon to Visual Admin for ur J2ee engine

go to

Server -- > services--> SLD Data Supplier

in Runtime tab

1)HTTP settings

Host name : localhost (assuming that u are using local SLD )

port : 50000 ( default http port it may be different for u depends )

user : Administrator ( j2ee admininstrator )

password : ******

dont check HTTPS option

save

2)RFC settings

gateway host : localhost

gateway service/port : 50000

save

3)CIM client generation Settings

host : localhost

port : 50000

user : administrator

dont check HTTPS

save

click CIMClient Test BUTTON

u should receive CIMOMClient object generation & connection test Sucessful message

I Hope u are able to solve ur problem Now

Regards

Asif

former_member205400
Active Participant
0 Kudos

So, in the Configuring Server Parameters section it says:

"Enter the name of the object server."

I assume that to be my fully qualified host.