on 05-22-2007 9:40 AM
Hi,
I need some help at the configuration settings.
I tried to configure as it is explained in PlatinGUI-TechEd2000.pdf (sheet 20)
config.ini
@MESSAGESERVER = msg.ini
@ROUTER = rout.ini
msg.ini
A05 : /H/<Server>/S/3299/H/
rout.ini
Partners : /H/<Server>/S/3299/H/
When I try to set the preferences I don't get anything to choose on the system-tab.
I also tried to use te expert-mode
conn=/H/<Server>/S/3299/H
This leds to an error: Service '3299/H' unknown
I hope anyone can guide me through this...
Thanks in advance.
MacOS 10.4.9
SAPGUI 7.00rev3
System: A05
SAPROUTER-String: /H/<Server>/S/3299/H/
Install SAPGUI for JAVA
Open SAPGUI for JAVA
Push New Button
Go to Advanced TAB
Check mark the Use expert configuration and
Enter in the following
conn=/H/192.168.1.195/S/3200&clnt=110
/H/IP ADDRESS of the application server
/S/3200 if this is the first instance
=110 for Client
The IP address will be different for your server
If you run two clients on one system:
conn=/H/192.168.1.195/S/3201&clnt=110
/H/IP ADDRESS of the application server
/S/3201 if this is the secondinstance
=110 for Client
If you want to experiement Uncheck the Use expert configuration and set parameters in the Security and Login tabs then come back to Advanced and check mark the Use expert configuration and save.
The translation is connect to
(H)ardware address = IP Address of server
System 3200 (port) no idea why port 3200 or 3201
cInt = client
This saves the same file in MAC, Linux and Windows, and you can edit that file one you have created this.
file name is connections
This has been tested on MAC, Linux and Windows using the Java SAPGUI
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Fry,
I try to make some recommendations regarding your config files and references to the relevant chapters of the manual which is part of the installation.
<b>config.ini:</b>
The location of the references to the message server and router files should be fully qualified http or file urls.
see 7.1 "GUI Configuration File"
<b>msg.ini:</b>
- Message servers are identified by /M/
- the port number looks wrong (looks like the default router port number)
- the trailing /H/ is wrong
So it should be something like
A05 : /M/<messageserverhostname>/S/<portnumber>
portnumbers for messageservers are usually >=3600
see 7.2 "Message Server List"
<b>rout.ini</b>
please remove the trailing /H/
see 7.3 "Router List"
For an overall explanation of these technical strings, please have a look at chapter 9.1 "connection strings".
Best regards
Rolf-Martin
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.