on 08-27-2016 5:04 AM
Hello all,
I am updating a ECC EHP3 System to ECC EHP7 and encounter the following error during the phase EHP_INCLUSION.
2 ETN085X"Calculate pure CRT Queue" "for installed Add-ons" "and already applied Support Packages" " "
3 ETN112 The OCS Package Queue is empty
2 ETN085X"Adding Add-on Installation Queue" " " " " " "
2WETN260 The Installation/Upgrade Package for Add-on "WEBCUIF" rel. "700" is not available
1 ETN214X."**************************************************"
1 ETN251 End of phase: "'Add-on Queue Calculation'"
1 ETN254 End date: "27.08.2016"
1 ETN255 End time: "11:21:59"
1 ETN214 ."**************************************************"
4 EPU202XEND OF SECTION BEING ANALYZED END OF EHP_INCLUSION ================================================
I was thinking if I should install this add-on beforehand. The answer negative since our system is on 700 but not 701 as specified in SAP Note 1162090 - Overview or release strategy for ABAP add-on WEBCUIF
Any idea on how to proceed ?
Thanks.
Regards,
Chiwo
Hello all,
I managed to get the response from SAP Support. He checked the internal tables and asked me to include also the Attribute Package SAP_APPL==604. Then the error was gone and with more new errors
3 ETN245 The following import prerequisites of OCS Package "SAPK-604BGINERECRUIT" have not been met:
3 ETN264 In the (alternatively) Requirement set "01":
3WETN492 Required Add-On component "SAP_BS_FND" rel."701" is not installed
2WETN543 OCS package "SAPK-604BGINERECRUIT" does not match the current software component vector
Then I added the ACP ERECURIT===604 and retried with INIT option
2WETN543 OCS package "SAPK-604BGINLSOFE" does not match the current software component vector
Then I added the ACP LSOFE===604 and retried with INIT option
2WETN424 Package "SAPK-605DHINEAGLTRAD" : "SAPK-60401INEAGLTRAD" "P" "Necessary Support Package is not available"
Then I added the ACP EA-GLTRADE 605 and retried with INIT option
2WETN424 Package "SAPK-605DHINECCDIMP" : "SAPK-60401INECCDIMP" "P" "Necessary Support Package is not available"
Then I added the ACP ECC-DIMP 605 and retried with INIT option
2WETN543 OCS package "SAPK-605BGINERECRUIT" does not match the current software component vector
Then I added the ACP ERECURIT 605 and retried with INIT option
2WETN543 OCS package "SAPK-605IHINSEMBW" does not match the current software component vector
Then I added the ACP SEM-BW====605 and retried with INIT option
3WETN492 Required Add-On component "SAP_BS_FND" rel."702" is not installed
2WETN543 OCS package "SAPK-605BGINLSOFE" does not match the current software component vector
Then I added the ACP LSOFE=====605 and retried with INIT option
The errors were all gone, data and cofiles were extracted to SUM directory accordingly.
Note that I could never see these packages in the XML file. Apparently there is something wrong with MOPZ/MP.
Hope it helps.
Regards,
Chiwo
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Chiwo,
Check if you have package K-731BHINWEBCUIF.SAR in the download directory. If yes, remove it.
This can be deleted from OS level or moved to some other location.
Check if you have SAPK-731BHINWEBCUIF in the ../EPS/in/ directory. If yes, remove it.
How to check -> Tx. SEPS -> GoTo -> Inxox -> Seach with package name
If you find this with status 'C' then select and delete it. Status would change to 'D'.
Once above are done, repat the phase.
Thank you.
Best Regards,
Gaurav
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Is the error still same. Was these present in download or ../EPS/in/ ?
It might be that internal tables are filled with attributes. One suggestion would be to,
1. Reset the SUM tool.
2. Make sure that download directory have only packages mentioned in stack.xml file. No additional installation/upgrade packages. Additional Kernel related SAR files are okay to have.
3. Empty the ../EPS/in/ Directory. You can move the files to some other location instead of deleting incase you need them for later use.
4. Start the upgrade again from scratch.
Best Regards,
Gaurav
Hello Gaurav,
Thanks for the prompt follow-ups.
Yes, I confirm that the package 731 has the status D and I still have the same error encountered.
I will definitely try to reset the upgrade.
For your information, I put the Upgrade Export right there, it should not be necessary @ all.
root@zaml06v102:/download/EHP7_Upgrade_Export > cat LABEL.ASC
SAP:::MM::BD51048902_6
Regards,
Chiwo
One small trick for creating the ACP name in case you have further issue after adding ACP as it will bring new attributes.
Check for which this is failing then consider the following.
ACP name is 13 character long.
ACP name consistent of 3 parts (First / Middle / Last)
First part is component name: Example SAP_APPL
Last part is release: Example 604
Middle part is : a number of = to make complete name 13 character long.
SAP_APPL -> 8 char
604 -> 3 character
So I included 2 = in middle part . So ACP name became SAP_APPL==604.
Download the ACP for problematic packages and then it should continue.
Best Regards,
Gaurav
Hello Gaurav,
Thanks for the feedback. It definitely brings us some insight on ACP
Still, I am not sure about the correctness of the resultant XML. As you know, I generated them with MOPZ and MP and some of the ACPs (from my latest response) were actually missing.
Have a great day.
Regards,
Chiwo
Hi Chiwo,
Attach the stack.xml file also. Make sure that all the WEBCUIF packages mentioned in stack.xml file exist in download directory or in ../EPS/in/
Regards,
Gaurav
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Gaurav,
Thanks for the feedback.
I attached 2 XMLs which were generated from MOPZ and also MP. (Please rename it to ZIP and extract the files inside )
Still, the WEBCUIF 700 never exists in these XMLs. I have opened a customer message in SAP side and would let you know if I get something new.
Regards,
Chiwo
Hi Chiwo,
R/3 connection would be needed to check. Make sure to open it and provide user details in sap secure area.
I have seem in most cases this occurs due to wrong calculation because of addional packages being available in queue so connection to check the internal tables would be needed.
Best Regards,
Gaurav
Hi,
For your information, when I upgraded my system to EHP7, this add-on was also upgraded by SUM from WEBCUIF 700 Patch 14 to 747 Patch 10 without any problem. No error was reported. Could you check the status of this add-on in OCS package directory of your system in transaction SPAM?
Regards,
Ganesan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
94 | |
11 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.