on 05-10-2005 7:59 PM
When i tired to connect THRU sapgui640 I get the following error:
connection to host 68.92.41.52 service sapdp00 timed out
Component:NI
Release:640
Version:37
Module:nixxi_r.cpp
line:1067
Method:NPConnect
Return code:-12
Counter:1
I did uninstall and reinstall the software but the same problem.Anyone has any suggestions Please do let me know.
Just FYR,
Do you use the VPN client to access the SAP system?
If yes, you may need to check if has the "Deterministic Network Enhancer" been checked in
your local area connection properties.
Wish this can help you little bit.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I am getting the same timed out error, My message server port is 3600 and sapdp00 is 3200 (both are properly available in the services file). infact it was working properly. But I had put some patches using SPAM, after that I am getting the error....
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
2. 问题分析:
由于安装了某些软件或病毒的干扰, 导致Windows系统注册表项
DataBasePath (HKEY_LOCAL_MACHINE/SYSTEM/currentcontrolset/Services/Tcpip/Parameters/)
的属性, 由 REG_EXPAND_SZ(扩展字符型)修改为 REG_SZ(字符型),
因此系统无法识别该注册表项的值 (通常为: %SystemRoot%\System32\drivers\etc)
3. 问题解决方法
将注册表项DataBasePath的属性改回 REG_EXPAND_SZ(扩展字符型), 示例如下:
a. 打开 系统开始菜单-> 运行, 在输入框中键入regedit
b. 按照路径
HKEY_LOCAL_MACHINE/SYSTEM/currentcontrolset/Services/Tcpip/Parameters
找到项DataBasePath
1) 首先将当前的该注册表项做备份, 例如将其重命名为DataBasePath_Old;
2) 复制该项的值, 通常为: %SystemRoot%\System32\drivers\etc;
3) 在相同目录下新建一名为DataBasePath的项, 类型为扩展字符型, 如右图所示:
4) 双击新建的项,将刚才的值复制到输入框中, 如下图所示
c. 关闭注册表编辑器, 重新登陆SAP即可
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
If you are behind a router/switch to connect 2 machines to the network, try turning off one of the machines that you do not have SAP GUI installed, then do a ipconfig /renew on the machine that you intend to use SAP and try to login again, this should work.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Try changing service numbers. Instead of 3600, try 3601, 3602 or 3200, 3201, 3202, etc.
In our landscape we have dp services from 3200 to 3299.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi All,
Add the following in the (XP)C:\windows\system32\drivers\etc\services file in your workstation
<b>sapdp00 3600/tcp</b>
and try, should work.
regards
Anand.M
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
> When i tired to connect THRU sapgui640 I get the
> following error:
> connection to host 68.92.41.52 service sapdp00 timed
> out
> Component:NI
> Release:640
> Version:37
> Module:nixxi_r.cpp
> line:1067
> Method:NPConnect
> Return code:-12
> Counter:1
>
> I did uninstall and reinstall the software but the
> same problem.Anyone has any suggestions Please do let
> me know.
Hi,
Can you please let me know what you have done to fix the problem. I have Centrino mobile technology PC with Windows XP professional operating system on it. And I face the same problem while trying to logon to SAP (MiniSap version 6.10).
thank you
Veera
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
When we experience this problem, its typically a network problem or an error in the saplogon.ini file.
John
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
88 | |
10 | |
10 | |
9 | |
7 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.