Does ISU support Multilevel Packing of HU (3 level)?

[dhaval_chauhan]

Does ISU support Multilevel Packing of HU (3 level)?

Example:

Z11
	Y11 (Material 1 = 1KG)
		Y12 (Material 1 = 1KG)
		Y13 (Material 1 = 2KG)

[dhaval_chauhan · Accepted solution]

I checked the program, problem was that system is not considering ParentHU anywhere for Packing of Hu's.

Found SAP note: 1505376 which released with corrections of include /SCWM/R_INITIALSTOCKUPLOADF03.

[dhaval_chauhan]

If any one has tried then request to share template file with 3 level HUs.

[TobiasAdler]

Hi Dhaval,

Yes, uploading HUs with several nested HUs is possible with transaction /SCWM/ISU for initial stock upload in EWM.

Attached you can find an example with three levels. HU 1 contains HU2, which contains HU 3, which contains stock.

(Please change the file extension from TXT to CSV after download)

For sure you have to adapt the file contents to your needs (e.g. product, bin, owner, entitled, ...).

Best regards, Tobias

EWM_ISU_Nested_HU.txt.zip

[dhaval_chauhan]

Hi Olet and Jobi,

Yes, I need multi nested HU's in EWM during stock upload through ISU.

I checked, with Postype 1 and 2 we can built hierarchy.

Example:

POSTYPE    HUIDENT   PARHU   TOPHU  

1                   Z11                            Z11

2                   Y11            Z11          Z11

4                  I can mention qty of Y11.

from here if I built again,

POSTYPE    HUIDENT   PARHU   TOPHU  

2                   Y12             Y11         Z11

then system is building both Y11 and Y12 inside Z11 only.

If any one has tried with 3 level packing, please share template file.

[jobi_t]

Hi Dhaval

ISU used for stock upload, Initial stock upload it means.

IPU used for upload of packaging specifications.

If you have stock in nested HU, you can use ISU

If you want packaging information then use IPU.

Regards

Jobi

[Former Member]

Hello Dhaval,

Are you talking about HU level in EWM ?

If it is in EWM ,It supports multilevel packing.

BR,

Olet