File Path error.. Unable to post file to filepath.

[badugu_sarika]

Hi ,

I am unable to post files to the mentioned filepath.Find the error below

I checked with the channel :

There is a UDF in which I have given File path.

And the same filepath is been maintained at receiver side.

I dont understand why the messagges are failing with the above error.

can anyone help me out.

Thanks

$arika

[markangelo_dihiansan · Accepted solution]

Hi Sarika,

Use dynamic configuration to populate the FileName and FilePath.

Regards,

Mark

[engswee · Accepted solution]

I think ASMA is not set in the receiver channel as it's still trying to use the static value set in the channel.

Make sure also that the attribute namespace used in UDF is the same as the one in the SFTP channel.

[badugu_sarika · Accepted solution]

Hi ,

ASMA is set .

And same namespace is being used in UDF and Channel.

[engswee · Accepted solution]

Can you share screenshot of ASMA setting in receiver channel as well as the UDF?

Also share the Dynamic Configuration section of the SOAP header of the message from the monitor.

[badugu_sarika · Accepted solution]

Hi,

Receiver chnnel screen.

UDF Screen :

SoAP HEAder ;

[manoj_khavatkopp · Accepted solution]

In your receiver channel  as Praveen suggested  you need to mention as %Directory% and %FileName%.

[engswee · Accepted solution]

Looks like the Directory key is created but the value is blank in the SOAP header.

Can you share the bottom half of the UDF (can't see the rest of the code)?

[badugu_sarika · Accepted solution]

Hi ,

Please find the code below.

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Response --> <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30"><SOAP:Header><SAP:Main versionMajor="003" versionMinor="001" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"><SAP:MessageClass>ApplicationMessage</SAP:MessageClass><SAP:ProcessingMode>asynchronous</SAP:ProcessingMode><SAP:MessageId>10FCF294-0801-4556-3308-BB27B154A757</SAP:MessageId><SAP:TimeSent>2016-02-22T13:38:57Z</SAP:TimeSent><SAP:Sender><SAP:Service>SBI</SAP:Service><SAP:Interface namespace="http://www.ericsson.com/finance/bcm/payment_order">SI_PaymentAck_OA</SAP:Interface></SAP:Sender><SAP:Receiver><SAP:Party agency="" scheme=""/><SAP:Service>F08CLNT400</SAP:Service><SAP:Interface namespace="http://www.ericsson.com/finance/bcm/payment_order">SI_Camt53_IA</SAP:Interface><SAP:Mapping notRequired="M"><SAP:ObjectId>Cf/xVB2oP7uq7WU/0fC7nA==</SAP:ObjectId><SAP:SWCV>t46YsF9rEeCqQuTHmVioeQ==</SAP:SWCV><SAP:SP>-1</SAP:SP><SAP:PropertyId>Gz2vE8WoEeXGLgAAMnJXSg==</SAP:PropertyId></SAP:Mapping></SAP:Receiver><SAP:Interface namespace="http://www.ericsson.com/finance/bcm/payment_order">SI_Camt53_IA</SAP:Interface></SAP:Main><SAP:ReliableMessaging SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService></SAP:ReliableMessaging><SAP:HopList SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><SAP:Hop timeStamp="2016-02-22T13:38:57Z" wasRead="false"><SAP:Engine type="AE">af.f15.dbcif15</SAP:Engine><SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter><SAP:MessageId>10FCF294-0801-4556-3308-BB27B154A757</SAP:MessageId><SAP:Info/></SAP:Hop><SAP:Hop timeStamp="2016-02-22T13:38:57Z" wasRead="false"><SAP:Engine type="IS">is.84.dbcif15</SAP:Engine><SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter><SAP:MessageId>10FCF294-0801-4556-3308-BB27B154A757</SAP:MessageId><SAP:Info>3.0</SAP:Info></SAP:Hop></SAP:HopList><SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><SAP:Date>20160222</SAP:Date><SAP:Time>133858</SAP:Time><SAP:Host>dbcif15</SAP:Host><SAP:SystemId>F15</SAP:SystemId><SAP:SystemNr>84</SAP:SystemNr><SAP:OS>HP-UX</SAP:OS><SAP:DB>ORACLE</SAP:DB><SAP:Language/><SAP:ProcStatus>003</SAP:ProcStatus><SAP:AdapterStatus>000</SAP:AdapterStatus><SAP:User>PIAFUSER</SAP:User><SAP:TraceLevel>3</SAP:TraceLevel><SAP:Logging>1</SAP:Logging><SAP:LogSeqNbr>010</SAP:LogSeqNbr><SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr><SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal><SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal><SAP:PipelineElementId/><SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId><SAP:PipelineService/><SAP:QIdInternal>XBTO1___0000</SAP:QIdInternal><SAP:CommitActor>X</SAP:CommitActor><SAP:SplitNumber>0</SAP:SplitNumber><SAP:NumberOfRetries>0</SAP:NumberOfRetries><SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries><SAP:TypeOfEngine client="120">CENTRAL</SAP:TypeOfEngine><SAP:PlsrvExceptionCode/><SAP:EOReferenceRuntime type="TID">99589C6E225F56CB0F7205E3</SAP:EOReferenceRuntime><SAP:EOReferenceInbound type="TID"/><SAP:EOReferenceOutbound type="TID"/><SAP:MessageSizePayload>8011</SAP:MessageSizePayload><SAP:MessageSizeTotal>51741</SAP:MessageSizeTotal><SAP:PayloadSizeRequest>10036</SAP:PayloadSizeRequest><SAP:PayloadSizeRequestMap>8011</SAP:PayloadSizeRequestMap><SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse><SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap><SAP:Reorganization>INI</SAP:Reorganization><SAP:AdapterInbound>AENGINE</SAP:AdapterInbound><SAP:AdapterOutbound>AENGINE</SAP:AdapterOutbound><SAP:InterfaceAction>DEL</SAP:InterfaceAction><SAP:RandomNumber>96</SAP:RandomNumber><SAP:AckStatus>000</SAP:AckStatus><SAP:SkipReceiverDetermination/><SAP:QueueLocation>3</SAP:QueueLocation><SAP:Sender_Agreement_GUID>8FF14BC16A233253BF5387C4251A9AB2</SAP:Sender_Agreement_GUID><SAP:Receiver_Agreement_GUID>339B8D333CCA3671B088D540DDB1E464</SAP:Receiver_Agreement_GUID><SAP:Serialize_Children>X</SAP:Serialize_Children><SAP:VersionPayloadRef>009</SAP:VersionPayloadRef></SAP:RunTime><SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30"><SAP:RunTimeItem><SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133857.17669</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133857.195968</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133857.196487</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="CORE">LMS_EXTRACTION</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133857.202705</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="CORE">LMS_EXTRACTION</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133857.203306</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133857.203395</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133857.203409</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133857.820224</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_XML_VALIDATION_RQ_INB</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133857.833534</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_XML_VALIDATION_RQ_INB</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133857.837738</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133857.857475</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133857.95044</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133857.965574</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133857.970531</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133857.98608</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133857.99883</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133857.998848</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133858.314131</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133858.342583</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133859.165317</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133859.196082</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133859.210768</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_VIRUS_SCAN_RQ_OUT</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133859.228693</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_VIRUS_SCAN_RQ_OUT</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133859.230614</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_XML_VALIDATION_RQ_OUT</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133859.247724</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_XML_VALIDATION_RQ_OUT</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133859.249455</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133859.268374</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="CORE">LMS_EXTRACTION</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133859.270671</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="CORE">LMS_EXTRACTION</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133859.27122</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">HTTP_SEND</SAP:Name><SAP:Timestamp type="begin" host="dbcif15">20160222133859.280695</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">HTTP_SEND</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133859.787856</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name><SAP:Timestamp type="end" host="dbcif15">20160222133859.789435</SAP:Timestamp></SAP:RunTimeItem></SAP:PerformanceHeader><SAP:DynamicConfiguration SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><SAP:Record namespace="http://sap.com/xi/XI/Message/30/general" name="senderAgreementGUID">8ff14bc16a233253bf5387c4251a9ab2</SAP:Record><SAP:Record namespace="http://sap.com/xi/XI/System" name="FileName">CAMT_NL36BNPA0227686632_EUR_.xml</SAP:Record><SAP:Record namespace="http://sap.com/xi/XI/System" name="Directory"/></SAP:DynamicConfiguration><SAP:Diagnostic SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><SAP:TraceLevel>Information</SAP:TraceLevel><SAP:Logging>Off</SAP:Logging></SAP:Diagnostic><SAP:OutboundBinding xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><SAP:OutboundBindingEntry version="30"><SAP:OutboundBindingObjectId>339B8D333CCA3671B088D540DDB1E464</SAP:OutboundBindingObjectId><SAP:FromPartyName/><SAP:FromServiceName>SBI</SAP:FromServiceName><SAP:ToPartyName/><SAP:ToServiceName>F08CLNT400</SAP:ToServiceName><SAP:ToInterfaceName>SI_Camt53_IA</SAP:ToInterfaceName><SAP:ToInterfaceNamespace>http://www.ericsson.com/finance/bcm/payment_order</SAP:ToInterfaceNamespace><SAP:OutboundBindingAttributes><SAP:AdapterTypeData/></SAP:OutboundBindingAttributes><SAP:HeaderMapping><SAP:FieldMapping/></SAP:HeaderMapping><SAP:ChannelEntry version="30"><SAP:PartyName/><SAP:ServiceName>F08CLNT400</SAP:ServiceName><SAP:ChannelName>CC_CAMT53_SFTP_Receiver</SAP:ChannelName><SAP:AdapterName>SFTP</SAP:AdapterName><SAP:AdapterNamespace>http://sap.com/xi/XI/SFTP</SAP:AdapterNamespace><SAP:AdapterSWCV>E9CB711219B311E180F3ED560A4290B1</SAP:AdapterSWCV><SAP:AdapterEngineType>AE</SAP:AdapterEngineType><SAP:AdapterEngineName/><SAP:MessageProtocol>Datei</SAP:MessageProtocol><SAP:MessageProtocolVersion>1.0.0</SAP:MessageProtocolVersion><SAP:TransportProtocol>SSHFtp</SAP:TransportProtocol><SAP:TransportProtocolVersion>1.0.0</SAP:TransportProtocolVersion><SAP:ChannelDirection>O</SAP:ChannelDirection><SAP:FromPartyAgency/><SAP:FromPartySchema/><SAP:ToPartySchema/><SAP:ToPartyAgency/><SAP:ChannelAttributes><SAP:AdapterTypeData/></SAP:ChannelAttributes></SAP:ChannelEntry></SAP:OutboundBindingEntry></SAP:OutboundBinding><SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30"><Trace level="1" type="T">Party normalization: sender </Trace>

<Trace level="3" type="T">Sender scheme external = </Trace>

<Trace level="3" type="T">Sender agency external = </Trace>

<Trace level="3" type="T">Sender party external = </Trace>

<Trace level="3" type="T">Sender party normalized = </Trace>

<Trace level="1" type="T">Determining the sender agreement </Trace>

<Trace level="3" type="T">##### DG: 0</Trace>

<Trace level="3" type="T">##### TO: 3</Trace>

<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>

<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>

<Trace level="2" type="T">Host = dbcif15.ss.sw.ericsson.se:8084</Trace>

<Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>

<Trace level="1" type="T">Remote address = 153.88.156.110</Trace>

<Trace level="1" type="T">User = PIAFUSER</Trace>

<Trace level="1" type="T">Process ID: 8799</Trace>

<Trace level="1" type="T">Work Process ID: 4 </Trace>

<Trace level="1" type="T">Message ID = 10FCF294080145563308BB27B154A757</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS">

<Trace level="1" type="T">CL_XMS_MAIN-&gt;DETERMINE_EXT_PID: CENTRAL</Trace>

<Trace level="3" type="T">##### DG: 0</Trace>

<Trace level="3" type="T">##### TO: 3</Trace>

<Trace level="1" type="T">Hop engine name = is.84.dbcif15</Trace>

<Trace level="1" type="T">Hop engine type = IS</Trace>

<Trace level="1" type="T">Hop adapter name = XI</Trace>

<Trace level="1" type="T">Hop adapter namespace = http://sap.com/xi/XI/System</Trace>

<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">

<Trace level="3" type="T">No triggers found. OK. </Trace>

</Trace>

<Trace level="3" type="T">system-ID = F15</Trace>

<Trace level="3" type="T">client = 120</Trace>

<Trace level="3" type="T">language = E</Trace>

<Trace level="3" type="T">user = PIAFUSER</Trace>

<Trace level="1" type="Timestamp">2016-02-22T13:38:57Z CET  </Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE"></Trace><!-- ************************************ -->

<Trace level="1" type="T">PLNAME = CENTRAL</Trace>

<Trace level="1" type="T">QOS = EO</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC">

<Trace level="3" type="T">QOS = EO</Trace>

<Trace level="3" type="T">Generate prefixed queue name </Trace>

<Trace level="1" type="T">Queue name : XBTI0005</Trace>

<Trace level="1" type="T">Going to persist message </Trace>

</Trace>

<Trace level="3" type="T">Version number = 000</Trace>

<Trace level="1" type="B" name="CL_XMS_LMS_EXTR_FILTER-GET_VALUES">

<Trace level="1" type="T">total processing time: 0.0002790 sec [0 filter(s)] </Trace>

</Trace>

<Trace level="1" type="T">Generated prefixed queue name = </Trace>

<Trace level="1" type="T">Schedule message in qRFC environment </Trace>

<Trace level="3" type="T">Setup qRFC Scheduler </Trace>

<Trace level="3" type="T">Call qRFC .... MsgGuid = 10FCF294080145563308BB27B154A757</Trace>

<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>

<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>

<Trace level="3" type="T">OK. </Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_TO_PERSIST"></Trace><!-- ************************************ -->

<Trace level="3" type="T">Persisting message Status = 001</Trace>

<Trace level="3" type="T">Message version 000</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

<Trace level="1" type="T">--start of determination of sender interface action </Trace>

<Trace level="1" type="T">select interface SI_PaymentAck_OA</Trace>

<Trace level="1" type="T">select interface namespace http://www.ericsson.com/finance/bcm/payment_order</Trace>

<Trace level="3" type="T">loading configuration for sender </Trace>

<Trace level="3" type="T">configuration records loaded:                                                                                                                                                                                                       0</Trace>

<Trace level="1" type="T">no interface action for sender found </Trace>

<Trace level="1" type="T">hence keep interface action INIT</Trace>

<Trace level="3" type="T">processing time of determination [micro sec]: 295 </Trace>

<Trace level="1" type="T">--end of determination of sender interface action </Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-READ_LAST_MSG_VERS_FROM_PERS">

<Trace level="3" type="T">Trace object available again now. OK. </Trace>

<Trace level="3" type="T">Message was read from persist layer. OK. </Trace>

<Trace level="3" type="T">Message properties in XMB object were setup. OK. </Trace>

</Trace>

<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>

<Trace level="2" type="T">Increment log sequence to 001</Trace>

<Trace level="1" type="T">Exception from packaging: No messages for constructing a package available.</Trace>

<Trace level="1" type="T">Continue single processing </Trace>

<Trace level="3" type="T">##### DG: 0</Trace>

<Trace level="3" type="T">##### TO: 3</Trace>

<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>

<Trace level="3" type="T">system-ID = F15</Trace>

<Trace level="3" type="T">client = 120</Trace>

<Trace level="3" type="T">language = E</Trace>

<Trace level="3" type="T">user = PIAFUSER</Trace>

<Trace level="1" type="Timestamp">2016-02-22T13:38:57Z CET  </Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">

<Trace level="1" type="T">&gt;&gt;&gt;PID delete old pid determination coding </Trace>

<Trace level="3" type="T">Pipeline-Elements for pipeline SAP_CENTRAL</Trace>

<Trace level="3" type="T">0001 PLSRV_XML_VALIDATION_RQ_INB</Trace>

<Trace level="3" type="T">0002 PLSRV_RECEIVER_DETERMINATION</Trace>

<Trace level="3" type="T">0003 PLSRV_INTERFACE_DETERMINATION</Trace>

<Trace level="3" type="T">0004 PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>

<Trace level="3" type="T">0005 PLSRV_MAPPING_REQUEST</Trace>

<Trace level="3" type="T">0006 PLSRV_OUTBOUND_BINDING</Trace>

<Trace level="3" type="T">0007 PLSRV_VIRUS_SCAN_RQ_OUT</Trace>

<Trace level="3" type="T">0008 PLSRV_XML_VALIDATION_RQ_OUT</Trace>

<Trace level="3" type="T">0009 PLSRV_CALL_ADAPTER</Trace>

<Trace level="3" type="T">0010 PLSRV_VIRUS_SCAN_RS_INB</Trace>

<Trace level="3" type="T">0011 PLSRV_XML_VALIDATION_RS_INB</Trace>

<Trace level="3" type="T">0012 PLSRV_MAPPING_RESPONSE</Trace>

<Trace level="3" type="T">0013 PLSRV_VIRUS_SCAN_RS_OUT</Trace>

<Trace level="3" type="T">0014 PLSRV_XML_VALIDATION_RS_OUT</Trace>

<Trace level="3" type="T">system-ID = F15</Trace>

<Trace level="3" type="T">client = 120</Trace>

<Trace level="3" type="T">language = E</Trace>

<Trace level="3" type="T">user = PIAFUSER</Trace>

<Trace level="3" type="Timestamp">2016-02-22T13:38:57Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>

<Trace level="1" type="B" name="PLSRV_XML_VALIDATION_RQ_INB">

<Trace level="3" type="Timestamp">2016-02-22T13:38:57Z CET Start of pipeline service processing PLSRVID= PLSRV_XML_VALIDATION_RQ_INB</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_XML_VALIDATION_RQ_INB</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>

<Trace level="3" type="T">PLSRVTYPE  = </Trace>

<Trace level="3" type="T">ADRESSMOD  = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS    = CL_XMS_PLSRV_VALIDATION</Trace>

<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>

<Trace level="3" type="T"> </Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

<Trace level="1" type="B" name="CL_XMS_PLSRV_VALIDATION-ENTER_PLSRV">

<Trace level="3" type="T">Pipeline Service = PLSRV_XML_VALIDATION_RQ_INB </Trace>

<Trace level="3" type="T">Skip Inbound Validation =  </Trace>

<Trace level="3" type="T">Skip Outbound Validation =  </Trace>

<Trace level="3" type="T">Area = XML_VALIDATION_INB </Trace>

<Trace level="1" type="T">Reading sender agreement </Trace>

<Trace level="3" type="T">Validation Mode = No Validation </Trace>

<Trace level="1" type="T">Inbound validation by Integration Engine does not take place </Trace>

</Trace>

</Trace>

</Trace>

<Trace level="3" type="Timestamp">2016-02-22T13:38:57Z CET End of pipeline service processing PLSRVID= PLSRV_XML_VALIDATION_RQ_INB</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call </Trace>

<Trace level="3" type="T">Message-Version = 001</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

<Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">

<Trace level="3" type="Timestamp">2016-02-22T13:38:57Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>

<Trace level="3" type="T">PLSRVTYPE  = </Trace>

<Trace level="3" type="T">ADRESSMOD  = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS    = CL_RD_PLSRV</Trace>

<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>

<Trace level="3" type="T"> </Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

<Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">

<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>

<Trace level="1" type="T"> Cache content is up to date </Trace>

<Trace level="2" type="T">Start without given receiver </Trace>

<Trace level="2" type="T">Using Receiver Determination 0417C58AB3D73BA2990105BC97D69D01 </Trace>

<Trace level="2" type="T">Classic Receiver Determination via Rules. </Trace>

<Trace level="3" type="T">...create rule engine </Trace>

<Trace level="2" type="T">Check conditions for rule line no. 3  </Trace>

<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&amp;_MSG&amp;;NSP=&amp;_NSM&amp;;XPATH=&quot;/p3:Document/p3:BkToCstmrStmt&quot;)% CE  </Trace>

<Trace level="2" type="T">Simple cl_values_reader ENGINE: XP /p3:Document/p3:BkToCstmrStmt </Trace>

<Trace level="2" type="T">......extracting values found: 0000000001 </Trace>

<Trace level="2" type="T">Value:  </Trace>

<Trace level="2" type="T">...valid Receiver with Condition:  - F08CLNT400 </Trace>

<Trace level="2" type="T">No Receiver found behaviour: 0  </Trace>

<Trace level="2" type="T">Number of Receivers:1  </Trace>

</Trace>

</Trace>

</Trace>

<Trace level="3" type="Timestamp">2016-02-22T13:38:57Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call </Trace>

<Trace level="3" type="T">Message-Version = 002</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

<Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">

<Trace level="3" type="Timestamp">2016-02-22T13:38:57Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>

<Trace level="3" type="T">PLSRVTYPE  = </Trace>

<Trace level="3" type="T">ADRESSMOD  = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS    = CL_ID_PLSRV</Trace>

<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>

<Trace level="3" type="T"> </Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

<Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">

<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>

<Trace level="1" type="T"> Cache content is up to date </Trace>

<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If)  F08CLNT400 SI_Camt53_IA </Trace>

<Trace level="2" type="T">...valid InbIf without Condition: SI_Camt53_IA </Trace>

<Trace level="1" type="T">total= 00001 success= 00000 fail= 00000 </Trace>

<Trace level="2" type="T">Number of receiving Interfaces:1  </Trace>

</Trace>

</Trace>

</Trace>

<Trace level="3" type="Timestamp">2016-02-22T13:38:57Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call </Trace>

<Trace level="3" type="T">Message-Version = 003</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT"></Trace><!-- ************************************ -->

<Trace level="3" type="Timestamp">2016-02-22T13:38:57Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>

<Trace level="3" type="T">PLSRVTYPE  = </Trace>

<Trace level="3" type="T">ADRESSMOD  = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS    = CL_XMS_PLSRV_RECEIVER_SPLIT2</Trace>

<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>

<Trace level="3" type="T"> </Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT2->ENTER_PLSRV"></Trace><!-- ************************************ -->

<Trace level="1" type="T">number of receivers: 1 </Trace>

<Trace level="1" type="T">Single-receiver split case </Trace>

<Trace level="1" type="T">Post-split internal queue name = XBTO1___0000</Trace>

<Trace level="1" type="T">Generated prefixed queue name = </Trace>

<Trace level="1" type="T">Schedule message in qRFC environment </Trace>

<Trace level="3" type="T">Setup qRFC Scheduler </Trace>

<Trace level="3" type="T">Call qRFC .... MsgGuid = 10FCF294080145563308BB27B154A757</Trace>

<Trace level="3" type="T">Call qRFC .... Version = 004</Trace>

<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>

<Trace level="3" type="T">OK. </Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_TO_PERSIST"></Trace><!-- ************************************ -->

<Trace level="3" type="T">Persisting message Status = 012</Trace>

<Trace level="3" type="T">Message version 004</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

<Trace level="1" type="T">--start of determination of sender interface action </Trace>

<Trace level="1" type="T">select interface SI_PaymentAck_OA</Trace>

<Trace level="1" type="T">select interface namespace http://www.ericsson.com/finance/bcm/payment_order</Trace>

<Trace level="3" type="T">loading configuration for sender </Trace>

<Trace level="3" type="T">configuration records loaded:                                                                                                                                                                                                       0</Trace>

<Trace level="1" type="T">no interface action for sender found </Trace>

<Trace level="1" type="T">hence keep interface action INIT</Trace>

<Trace level="3" type="T">processing time of determination [micro sec]: 345 </Trace>

<Trace level="1" type="T">--end of determination of sender interface action </Trace>

<Trace level="1" type="T">--start of determination of receiver interface action </Trace>

<Trace level="1" type="T">number of receivers:                                                                                                                                                                                                       1</Trace>

<Trace level="3" type="T">loading configuration for receivers </Trace>

<Trace level="3" type="T">configuration records loaded:                                                                                                                                                                                                       0</Trace>

<Trace level="1" type="T">receiver                                                                                                                                                                                                       1</Trace>

<Trace level="2" type="T">receiver interface SI_Camt53_IA</Trace>

<Trace level="2" type="T">receiver interface namespace http://www.ericsson.com/finance/bcm/payment_order</Trace>

<Trace level="1" type="T">no action for receiver found </Trace>

<Trace level="1" type="T">no interface action for sender or receiver found </Trace>

<Trace level="1" type="T">hence set interface action to DEL</Trace>

<Trace level="3" type="T">processing time of determination [micro sec]: 394 </Trace>

<Trace level="1" type="T">--end of determination of receiver interface action </Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-READ_LAST_MSG_VERS_FROM_PERS">

<Trace level="3" type="T">Trace object available again now. OK. </Trace>

<Trace level="3" type="T">Message was read from persist layer. OK. </Trace>

<Trace level="3" type="T">Message properties in XMB object were setup. OK. </Trace>

</Trace>

<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>

<Trace level="2" type="T">Increment log sequence to 005</Trace>

<Trace level="1" type="T">Exception from packaging: No messages for constructing a package available.</Trace>

<Trace level="1" type="T">Continue single processing </Trace>

<Trace level="3" type="T">##### DG: 0</Trace>

<Trace level="3" type="T">##### TO: 3</Trace>

<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>

<Trace level="3" type="T">system-ID = F15</Trace>

<Trace level="3" type="T">client = 120</Trace>

<Trace level="3" type="T">language = E</Trace>

<Trace level="3" type="T">user = PIAFUSER</Trace>

<Trace level="1" type="Timestamp">2016-02-22T13:38:58Z CET  </Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC"></Trace><!-- ************************************ -->

<Trace level="1" type="T">&gt;&gt;&gt;PID delete old pid determination coding </Trace>

<Trace level="3" type="T">Pipeline-Elements for pipeline SAP_CENTRAL</Trace>

<Trace level="3" type="T">0001 PLSRV_XML_VALIDATION_RQ_INB</Trace>

<Trace level="3" type="T">0002 PLSRV_RECEIVER_DETERMINATION</Trace>

<Trace level="3" type="T">0003 PLSRV_INTERFACE_DETERMINATION</Trace>

<Trace level="3" type="T">0004 PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>

<Trace level="3" type="T">0005 PLSRV_MAPPING_REQUEST</Trace>

<Trace level="3" type="T">0006 PLSRV_OUTBOUND_BINDING</Trace>

<Trace level="3" type="T">0007 PLSRV_VIRUS_SCAN_RQ_OUT</Trace>

<Trace level="3" type="T">0008 PLSRV_XML_VALIDATION_RQ_OUT</Trace>

<Trace level="3" type="T">0009 PLSRV_CALL_ADAPTER</Trace>

<Trace level="3" type="T">0010 PLSRV_VIRUS_SCAN_RS_INB</Trace>

<Trace level="3" type="T">0011 PLSRV_XML_VALIDATION_RS_INB</Trace>

<Trace level="3" type="T">0012 PLSRV_MAPPING_RESPONSE</Trace>

<Trace level="3" type="T">0013 PLSRV_VIRUS_SCAN_RS_OUT</Trace>

<Trace level="3" type="T">0014 PLSRV_XML_VALIDATION_RS_OUT</Trace>

<Trace level="3" type="T">system-ID = F15</Trace>

<Trace level="3" type="T">client = 120</Trace>

<Trace level="3" type="T">language = E</Trace>

<Trace level="3" type="T">user = PIAFUSER</Trace>

<Trace level="3" type="Timestamp">2016-02-22T13:38:58Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>

<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>

<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">

<Trace level="3" type="Timestamp">2016-02-22T13:38:58Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>

<Trace level="3" type="T">PLSRVTYPE  = </Trace>

<Trace level="3" type="T">ADRESSMOD  = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS    = CL_MAPPING_XMS_PLSRV3</Trace>

<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>

<Trace level="3" type="T"> </Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">

<Trace level="2" type="T">......attachment XI_Context not found </Trace>

<Trace level="3" type="T">Append context with name =senderAgreementGUID and value =8ff14bc16a233253bf5387c4251a9ab2 </Trace>

<Trace level="3" type="T">Mapping already defined in interface determination </Trace>

<Trace level="3" type="T">Object ID of Interface Mapping 09FFF1541DA83FBBAAED653FD1F0BB9C </Trace>

<Trace level="3" type="T">Version ID of Interface Mapping B78E98B05F6B11E0AA42E4C79958A879 </Trace>

<Trace level="1" type="T">Interface Mapping http://www.ericsson.com/finance/bcm/payment_order OM_PaymentAck_to_CAMT53 </Trace>

<Trace level="3" type="T">Mapping Steps 1  JAVA_JDK com/sap/xi/tf/_MM_PaymentAck_to_CAMT53_ </Trace>

<Trace level="3" type="T">MTOM Attachments are Transferred to the Payload </Trace>

<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/Message/30/general senderAgreementGUID 8ff14bc16a233253bf5387c4251a9ab2 ) </Trace>

<Trace level="2" type="T">Mode 0  </Trace>

<Trace level="3" type="T">Search com/sap/xi/tf/_MM_PaymentAck_to_CAMT53_.class (http://www.ericsson.com/finance/bcm/payment_order, -1) in swcv b78e98b0-5f6b-11e0-aa42-e4c79958a879. </Trace>

<Trace level="2" type="T">Loaded class com.sap.xi.tf._MM_PaymentAck_to_CAMT53_ </Trace>

<Trace level="3" type="T">Search com/sap/xi/tf/_MM_PaymentAck_to_CAMT53_$MT$InnerLibsList.class (http://www.ericsson.com/finance/bcm/payment_order, -1) in swcv b78e98b0-5f6b-11e0-aa42-e4c79958a879. </Trace>

<Trace level="2" type="T">Loaded class com.sap.xi.tf._MM_PaymentAck_to_CAMT53_$MT$InnerLibsList </Trace>

<Trace level="3" type="T">Search com/sap/xi/tf/_MM_PaymentAck_to_CAMT53_$MT$InnerParamsList.class (http://www.ericsson.com/finance/bcm/payment_order, -1) in swcv b78e98b0-5f6b-11e0-aa42-e4c79958a879. </Trace>

<Trace level="2" type="T">Loaded class com.sap.xi.tf._MM_PaymentAck_to_CAMT53_$MT$InnerParamsList </Trace>

<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_PaymentAck_to_CAMT53_ </Trace>

<Trace level="1" type="T"> *** START APPLICATION TRACE *** </Trace>

<Trace level="3" type="T">Document start </Trace>

<Trace level="3" type="T">Document start </Trace>

<Trace level="3" type="T">Start tag [ns0:ZBIC_BANKNM] </Trace>

<Trace level="3" type="T">Add raw attribute [ xmlns:ns0=&quot;urn:sap-com:document:sap:rfc:functions&quot;] </Trace>

<Trace level="3" type="T">Start tag [I_BIC] </Trace>

<Trace level="3" type="T">Add raw attribute [] </Trace>

<Trace level="3" type="T">Put value [BNPA] </Trace>

<Trace level="3" type="T">Close tag [I_BIC] </Trace>

<Trace level="3" type="T">Close tag [ns0:ZBIC_BANKNM] </Trace>

<Trace level="3" type="T">Document end </Trace>

<Trace level="3" type="T">The RFC lookup returned an RFC responce </Trace>

<Trace level="3" type="T">closing accessor. </Trace>

<Trace level="3" type="T">accessor closed. </Trace>

<Trace level="3" type="T">Start tag [ns0:Document] </Trace>

<Trace level="3" type="T">Add raw attribute [ xmlns:ns0=&quot;urn:iso:std:iso:20022:tech:xsd:camt.053.001.02&quot;] </Trace>

<Trace level="3" type="T">Start tag [ns0:BkToCstmrStmt] </Trace>

<Trace level="3" type="T">Start tag [ns0:GrpHdr] </Trace>

<Trace level="3" type="T">Start tag [ns0:MsgId] </Trace>

<Trace level="3" type="T">Put value [ZY072ZYJBKBYD8EFW] </Trace>

<Trace level="3" type="T">Close tag [ns0:MsgId] </Trace>

<Trace level="3" type="T">Start tag [ns0:CreDtTm] </Trace>

<Trace level="3" type="T">Put value [2016-02-11T04:52:37] </Trace>

<Trace level="3" type="T">Close tag [ns0:CreDtTm] </Trace>

<Trace level="3" type="T">Close tag [ns0:GrpHdr] </Trace>

<Trace level="3" type="T">Start tag [ns0:Stmt] </Trace>

<Trace level="3" type="T">Start tag [ns0:Id] </Trace>

<Trace level="3" type="T">Put value [ZY072ZYJBKBYD8EFW] </Trace>

<Trace level="3" type="T">Close tag [ns0:Id] </Trace>

<Trace level="3" type="T">Start tag [ns0:ElctrncSeqNb] </Trace>

<Trace level="3" type="T">Put value [5] </Trace>

<Trace level="3" type="T">Close tag [ns0:ElctrncSeqNb] </Trace>

<Trace level="3" type="T">Start tag [ns0:CreDtTm] </Trace>

<Trace level="3" type="T">Put value [2016-02-11T04:50:37] </Trace>

<Trace level="3" type="T">Close tag [ns0:CreDtTm] </Trace>

<Trace level="3" type="T">Start tag [ns0:Acct] </Trace>

<Trace level="3" type="T">Start tag [ns0:Id] </Trace>

<Trace level="3" type="T">Start tag [ns0:IBAN] </Trace>

<Trace level="3" type="T">Put value [NL36BNPA0227686632] </Trace>

<Trace level="3" type="T">Close tag [ns0:IBAN] </Trace>

<Trace level="3" type="T">Close tag [ns0:Id] </Trace>

<Trace level="3" type="T">Start tag [ns0:Ccy] </Trace>

<Trace level="3" type="T">Put value [EUR] </Trace>

<Trace level="1" type="T"> *** TRACE TRUNCATED (Adjust the Log Configuration by refining the Tracing filter and Severity Level. Regenerate the traces after the changes and check in NWA Log Viewer) *** </Trace>

<Trace level="1" type="T">#Dynamic Header entries= 0000000003 </Trace>

<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/Message/30/general senderAgreementGUID 8ff14bc16a233253bf5387c4251a9ab2 ) ( http://sap.com/xi/XI/System FileName CAMT_NL36BNPA0227686632_EUR_.xml ) ( http://sap.com/xi/XI/System Directory  ) </Trace>

<Trace level="1" type="T">attachments  #remove= 000000 #set= 000000 #copy= 000000 </Trace>

<Trace level="1" type="T">ContentType application/xml </Trace>

</Trace>

</Trace>

</Trace>

<Trace level="3" type="Timestamp">2016-02-22T13:38:59Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call </Trace>

<Trace level="3" type="T">Message-Version = 005</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

<Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">

<Trace level="3" type="Timestamp">2016-02-22T13:38:59Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>

<Trace level="3" type="T">PLSRVTYPE  = </Trace>

<Trace level="3" type="T">ADRESSMOD  = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS    = CL_XMS_PLSRV_OUTBINDING</Trace>

<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>

<Trace level="3" type="T"> </Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">

<Trace level="2" type="T">O U T B O U N D - B I N D I N G </Trace>

<Trace level="2" type="T"> Cache content is up to date </Trace>

<Trace level="2" type="T">determine  OUTBOUND BINDING  for: </Trace>

<Trace level="2" type="T">-SBI </Trace>

<Trace level="2" type="T">-F08CLNT400 </Trace>

<Trace level="2" type="T">http://www.ericsson.com/finance/bcm/payment_order.SI_Camt53_IA </Trace>

<Trace level="2" type="T">Channel found:  - F08CLNT400 - CC_CAMT53_SFTP_Receiver </Trace>

<Trace level="2" type="T">no header mapping defined </Trace>

</Trace>

</Trace>

</Trace>

<Trace level="3" type="Timestamp">2016-02-22T13:38:59Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call </Trace>

<Trace level="3" type="T">Message-Version = 006</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

<Trace level="1" type="B" name="PLSRV_VIRUS_SCAN_RQ_OUT">

<Trace level="3" type="Timestamp">2016-02-22T13:38:59Z CET Start of pipeline service processing PLSRVID= PLSRV_VIRUS_SCAN_RQ_OUT</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_VIRUS_SCAN_RQ_OUT</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>

<Trace level="3" type="T">PLSRVTYPE  = </Trace>

<Trace level="3" type="T">ADRESSMOD  = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS    = CL_XMS_PLSRV_VIRUS_SCAN</Trace>

<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>

<Trace level="3" type="T"> </Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

<Trace level="1" type="B" name="CL_XMS_PLSRV_VIRUS_SCAN-ENTER_PLSRV">

<Trace level="3" type="T">Pipeline Service = PLSRV_VIRUS_SCAN_RQ_OUT </Trace>

<Trace level="1" type="T">Reading receiver agreement </Trace>

<Trace level="1" type="T">Outbound virus scan does not take place </Trace>

</Trace>

</Trace>

</Trace>

<Trace level="3" type="Timestamp">2016-02-22T13:38:59Z CET End of pipeline service processing PLSRVID= PLSRV_VIRUS_SCAN_RQ_OUT</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call </Trace>

<Trace level="3" type="T">Message-Version = 007</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

<Trace level="1" type="B" name="PLSRV_XML_VALIDATION_RQ_OUT">

<Trace level="3" type="Timestamp">2016-02-22T13:38:59Z CET Start of pipeline service processing PLSRVID= PLSRV_XML_VALIDATION_RQ_OUT</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_XML_VALIDATION_RQ_OUT</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>

<Trace level="3" type="T">PLSRVTYPE  = </Trace>

<Trace level="3" type="T">ADRESSMOD  = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS    = CL_XMS_PLSRV_VALIDATION</Trace>

<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>

<Trace level="3" type="T"> </Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

<Trace level="1" type="B" name="CL_XMS_PLSRV_VALIDATION-ENTER_PLSRV">

<Trace level="3" type="T">Pipeline Service = PLSRV_XML_VALIDATION_RQ_OUT </Trace>

<Trace level="3" type="T">Skip Inbound Validation =  </Trace>

<Trace level="3" type="T">Skip Outbound Validation =  </Trace>

<Trace level="3" type="T">Area = XML_VALIDATION_OUT </Trace>

<Trace level="1" type="T">Reading receiver agreement </Trace>

<Trace level="3" type="T">Validation Mode = No Validation </Trace>

<Trace level="1" type="T">Outbound validation does not take place </Trace>

</Trace>

</Trace>

</Trace>

<Trace level="3" type="Timestamp">2016-02-22T13:38:59Z CET End of pipeline service processing PLSRVID= PLSRV_XML_VALIDATION_RQ_OUT</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call </Trace>

<Trace level="3" type="T">Message-Version = 008</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">

<Trace level="3" type="Timestamp">2016-02-22T13:38:59Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace><!-- ************************************ -->

<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>

<Trace level="3" type="T">PLSRVTYPE  = =SWITCH=</Trace>

<Trace level="3" type="T">ADRESSMOD  = SD</Trace>

<Trace level="3" type="T">P_CLASS    = </Trace>

<Trace level="3" type="T">P_IFNAME   = </Trace>

<Trace level="3" type="T">P_METHOD   = </Trace>

<Trace level="3" type="T"> </Trace>

<Trace level="1" type="B" name="CL_XMS_LMS_EXTR_FILTER-GET_VALUES">

<Trace level="1" type="T">total processing time: 0.0003050 sec [0 filter(s)] </Trace>

</Trace>

<Trace level="3" type="T">PLSRVTYPE  = AENGINE</Trace>

<Trace level="3" type="T">ADRESSMOD  = SD</Trace>

<Trace level="3" type="T">P_CLASS    = CL_XMS_PLSRV_IE_ADAPTER</Trace>

<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>

<Trace level="3" type="T"> </Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace><!-- ************************************ -->

<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">

<Trace level="3" type="T">Channel for adapter engine: SFTP</Trace>

<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-CALL_XMS_HTTP">

<Trace level="2" type="T">return fresh values from cache </Trace>

<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): </Trace>

<Trace level="1" type="T">URL = http://dbcif15.ss.sw.ericsson.se:58400/MessagingSystem/receive/AFW/XI</Trace>

<Trace level="1" type="T">User = PIISUSER</Trace>

<Trace level="1" type="T">Cached = X</Trace>

<Trace level="3" type="T">Creating HTTP-client </Trace>

<Trace level="3" type="T">HTTP-client: creation finished</Trace>

<Trace level="1" type="T">Security: Basic authentication </Trace>

<Trace level="1" type="T">Serializing message object... </Trace>

<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>

<Trace level="1" type="T">HTTP Multipart document length: 11582 </Trace>

<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>

<Trace level="1" type="T">HTTP Timeout: XI ABAP Configuration(&quot;RUNTIME&quot; &quot;HTTP_TIMEOUT&quot;) 10000 </Trace>

<Trace level="1" type="T">Timeout: 10000 </Trace>

<Trace level="1" type="T">HTTP-client: request sent</Trace>

<Trace level="3" type="T">HTTP-client: request sent</Trace>

<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>

<Trace level="1" type="T">HTTP-client: response received</Trace>

<Trace level="3" type="T">HTTP-client: checking status code...</Trace>

<Trace level="1" type="T">HTTP-client: status code = 202</Trace>

<Trace level="3" type="T">HTTP-client: closing...</Trace>

</Trace>

</Trace>

</Trace>

</Trace>

<Trace level="3" type="Timestamp">2016-02-22T13:38:59Z CET End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call </Trace>

<Trace level="3" type="T">Message-Version = 009</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

<Trace level="3" type="T">Async processing: skip mapping of response </Trace>

</Trace>

<Trace level="3" type="T">system-ID = F15</Trace>

<Trace level="3" type="T">client = 120</Trace>

<Trace level="3" type="T">language = E</Trace>

<Trace level="3" type="T">user = PIAFUSER</Trace>

<Trace level="1" type="Timestamp">2016-02-22T13:38:59Z CET  </Trace>

<Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_TO_PERSIST"></Trace><!-- ************************************ -->

<Trace level="3" type="T">Persisting message Status = 003</Trace>

<Trace level="3" type="T">Message version 010</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</SAP:Trace></SOAP:Header><SOAP:Body><SAP:Manifest wsu:Id="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"/></SOAP:Body></SOAP:Envelope>

[engswee · Accepted solution]

Share bottom half of the UDF logic, not the whole SOAP message.

The details from the SOAP message is already very clear:-

[badugu_sarika · Accepted solution]

Hi ,

Pls find rest of UDF logic

[engswee · Accepted solution]

Is it possible that during runtime, it cannot find a match in all the if-else statements, therefore value1 remains a zero-length string? You can try putting a default directory value for value1 instead of blank.

[badugu_sarika · Accepted solution]

Hi Eng Swee ,

I didt get your solution . what do you mean exactly?

[engswee · Accepted solution]

Refer screenshot below.

Variable to stores directory value is initialized to blank at step 1. At step 2, it is assigned a value.

My guess is that it does not meet any of the if statements, and there is no final else statement for other unlisted cases.

You can either:-

a) initialized the value to a default directory at step 1

b) or add an else statement at step 2 if it does not meet any of the criteria

[former_member182412 · Accepted solution]

Hi Sarika,

And don't forget to change the file name and file path as mentioned below to %FileName% and %Directory% then it will work.

Regards,

Praveen.

[engswee · Accepted solution]

Hi Praveen

And change the file name and file path as mentioned below to %FileName% and %Directory% then it will work.

AFAIK, the %var% format applies for variable substitution and not for DC/ASMA. For DC/ASMA at receiver channel, the value would normally be ignored. Isn't that the behavior?

Regards

Eng Swee

[engswee · Accepted solution]

I double checked the documentation on this. The SFTP documentation does not mention this explicitly, so I checked the File/FTP documentation which states below:-

Define Adapter-Specific Message Attributes
A configured variable substitution (see above) is performed after the attributes from the message header are applied.

To evaluate adapter attributes in the message header of the PI message, select Use Adapter-Specific Message Attributes.
If you want missing message attributes to trigger an error message, select Fail If Adapter-Specific Message Attributes Missing.If the indicator is set and the header for adapter-specific message attributes or one of the set attributes is missing from the message, this leads, in asynchronous cases, to a delivery exception in the audit log of the message. In synchronous cases, the sender of the message is notified.If you do not set the indicator, and message attributes are missing, the adapter accesses information from the adapter configuration

My guess is that since the SFTP adapter do not have a Fail option, it uses the default value in the adapter configuration (which is %) when the message attribute is missing.

[former_member182412 · Accepted solution]

Hi Eng,

Yes you are right if we have dynamic attribute in the header then the configuration will be ignored but by looking at the error even we have the attribute in the header it is taking from configuration but the attribute value is empty, This was the confusion but i have tested the behavior is same what you expected.

I tested the file name behavior with configuration as %

FileName attribute is blank.

The file name created with '%'.

I also tested with correct FileName dynamic header attribute and created same file name as sender file name with same configuration which is file name as %.

Regards,

Praveen.

[badugu_sarika · Accepted solution]

Thanks alot Eng Swee. I could able to identify the problem and fix it.

[badugu_sarika · Accepted solution]

Hi Praveen ,

Thankyou for your valuabe comments .

[engswee · Accepted solution]

Great. Please close the thread if your queries are resolved.

[former_member182412]

Hi Sarika,

You need to mention the variable names between % like for file name you need to mention %FileName% not just one '%'.

Regards,

Praveen.

[badugu_sarika]

In UDF Filepath and folder are being ceated... I cannot give as suggested by you in the channel...

[Former Member]

Hi Sarika,

Try the simple solution below

Regards,

Hailong

[Former Member]

Hi Sarika,

Can you please try with below option. May be it's work for you.

regards,
Bhavin

[Harish]

Hi Sarika,

the receiver channel is not able to identify the folder. It can be because it is unable to reach the server or folder. You can test this by creating a sender channel and agreement/ICO. If the channel able to connect the path then it is the problem with your receiver channel.

regards,

Harish

[badugu_sarika]

Hi Harish,

I dont think the problem wud be with channel . Because there are other filepaths for which files are been posted using the same channel.