cancel
Showing results for 
Search instead for 
Did you mean: 

MAIN_NEWBAS/XPRAS_AIMMRG phase , Job RDDEXECL failing

Former Member
0 Kudos

Hello All,

I'm facing the below error screen while performing CRM 2007 to 7.02 upgrade.

in RDDEXECL Job logs it shows : below message.

26.11.2015 14:21:40 Saved

26.11.2015 14:21:46 Job also cancelled due to process termination. See

the system log

in the system logs it shows :

14:15:44 DIA  003 000 SAPSYS                          BB  D Reset buffer

ESM ; mode and status: InvalBeg

14:15:44 DIA  003 000 SAPSYS                          BB  D Reset buffer

ESM ; mode and status: InvalEnd

14:15:44 DIA  003 000 SAPSYS                          FC  K Calender

buffer CALE was reset (Mode: 3 )

14:17:15 BTC  023 000 DDIC                            Q0  E Signal 6

received by operating system

14:17:16 BTC  023 000 DDIC                            Q0  2 Stop Workp.

23, PID 6703

14:17:18 BTC  023                                    Q0  1 Start Workp.

23, 5 times since system startup. PID 21177

14:17:19 BTC  023 000 DDIC                            F6  F TemSe object

JOBLGX14160800X89983 was closed remotely

14:17:19 BTC  023 000 DDIC                            Q0  E Signal 11

received by operating system

14:17:19 BTC  023 000 DDIC                            R4  7 Delete

session 001 after error 023

and in abap dumps and Sick tcode it shows

Kernel is not compatible.

SAP System Check

R/3 release 731 is not supported with this kernel (721)

Severe problems were detected during initial system check.

Please, do not use that system before fixing these problems.

In the work process logs I can see work process is getting restarted.

M  6000000005e00d90 (Memory location which caused fault)

M  SigIUnblock: signal SIGSEGV was in UNBLOCKED mode

M                    C-STACK

(0)  0x40000000030be110  CTrcStack2 + 0x1d0 at dptstack.c:228

[dw.sapFCX_DVEBMGS58]

(1)  0x40000000065b9f70  SigIGenAction + 0x610 at sigux.c:1795

[dw.sapFCX_DVEBMGS58]

(2)  0xe00000012068f440      Signal 11 (SIGSEGV) delivered

(3)  0xc0000000004b1960  _memcmp + 0xa0 [/usr/lib/hpux64/libc.so.1]

(4)  0x40000000020b9bc0  ab_endImode + 0x140 at abinit.c:2926

[dw.sapFCX_DVEBMGS58]

(5)  0x4000000002fe81d0  ThrCleanupImode + 0x50 at thxxab.c:8717

[dw.sapFCX_DVEBMGS58]

(6)  0x4000000002f61780  ThCleanImodeForIdx + 0x80 at thxxmode.c:6489

[dw.sapFCX_DVEBMGS58]

(7)  0x4000000003782160  $cold_ThCleanAllImodes + 0xb0 at thxxmode.c:6464

[dw.sapFCX_DVEBMGS58]

(8)  0x4000000002957e70  ThResFree + 0x2360 at thxxmode.c:1238

[dw.sapFCX_DVEBMGS58]

Do I need to  upgrade the kernel, if yes to what level, till now the

upgrade ran with the old kernel only without any issues.

please help us in resolving the issue.

SUM Logs ;

SAPup.ECO log :

................................................................

### Phase MAIN_NEWBAS/XPRAS_AIMMRG:

SAPup> Starting subprocess with PID 29842 in phase 'XPRAS_AIMMRG' at

20151126141835

    ENV: DIR_LIBRARY=/usr/sap/FCX/DVEBMGS58/exe

    ENV:

JAVA_HOME=/usr/sap/FCX/SYS/exe/jvm/hpia64/sapjvm_4.1.049/sapjvm_4

    ENV:

LD_LIBRARY_PATH=/usr/sap/FCX/DVEBMGS58/exe:/usr/sap/FCX/SUM/jvm/jre/lib/i

a64/server:/usr/sap/FCX/SUM/jvm/jre/lib/ia64:/usr/sap/FCX/SUM/jvm/jre/../

lib/ia64

    ENV: NLS_LANG=AMERICAN_AMERICA.UTF8

    ENV: ORACLE_BASE=/oracle

    ENV: ORACLE_HOME=/oracle/FCX/112_64

    ENV: ORACLE_SID=FCX

    ENV:

PATH=/usr/sap/FCX/DVEBMGS58/exe:/oracle/FCX/112_64/bin:/usr/sap/FCX/SYS/e

xe/jvm/hpia64/sapjvm_4.1.049/sapjvm_4/bin:.:/home/fcxadm:/usr/sap/FCX/SYS

/exe/run:/usr/bin:/usr/ccs/bin:/usr/contri

b/bin:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/ipf/bin:/opt/gvsd/bin:/opt/n

ettladm/bin:/opt/fcms/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/sas/bin:/opt/

graphics/common/bin:/opt/atok/bin:/usr/bin/X11:/usr

/contrib/bin/X11:/opt/sec_mgmt/bastille/bin:/opt/resmon/bin:/opt/drd/bin:

/opt/dsau/bin:/opt/dsau/sbin:/opt/gnome/bin:/opt/perf/bin:/usr/contrib/kw

db/bin:/opt/mozilla:/opt/prm/bin:/opt/sfm/bin:/opt/

swm/bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/swa/bin:/opt/hpsmh/bin:/o

pt/langtools/bin:/opt/gwlm/bin:/opt/ignite/bin:/usr/local/bin:/opt/super/

bin:/opt/hpnpl//bin:/usr/local/lib:/opt/omni/bin:/o

pt/hpvm/bin:/opt/caliper/bin:/opt/perl_32/bin:/opt/perl_64/bin:/opt/propp

lus/bin:/opt/sentinel/bin:/etc/cmcluster/scripts/tkit/vtn

    ENV: SAPDATA_HOME=/oracle/FCX

    ENV: SAPSYSTEMNAME=FCX

    ENV: dbms_type=ORA

    ENV: dbs_ora_schema=SAPSR3

    ENV: dbs_ora_tnsname=FCX

    PWD: /usr/sap/FCX/SUM/abap/tmp

EXECUTING /usr/sap/FCX/DVEBMGS58/exe/tp

pf=/usr/sap/FCX/SUM/abap/var/XPRASUPG.TPP put FCX

This is tp version 380.20.11 (release 721, unicode enabled)

Looking for effective putsteps ... ... ready (looking for putsteps)

ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT

stopping on error 12 during EXECUTION OF REPORTS AFTER PUT

tp returncode summary:

TOOLS: Highest return code of single steps was: 12

WARNS: Highest tp internal warning was: 0118

tp finished with return code: 12

meaning:

  A tool used by tp aborted

..............................................................

SAPup.log :

..............................................................

CURRENTPHASE MAIN_NEWBAS/XPRAS_AIMMRG

...started at 20151126135725

..times self: 12.420/1.630 usr/sys, children 0.440/0.580 usr/sys.

-> Auto_repeat is active, count down is 1.

..finished at 20151126140238 with status FAILED.

# Error message set: 'Detected 6 aborted activities in 'XPRASUPG.ELG'

Calling '/usr/sap/FCX/DVEBMGS58/exe/tp' failed with return code 12, check

/usr/sap/FCX/SUM/abap/log/SAPup.ECO for details'

CURRENTPHASE MAIN_NEWBAS/XPRAS_AIMMRG

...started at 20151126140238

..times self: 6.720/1.340 usr/sys, children 0.420/0.590 usr/sys.

..finished at 20151126140708 with status FAILED.

# Error message set: 'Detected 3 aborted activities in 'XPRASUPG.ELG'

Calling '/usr/sap/FCX/DVEBMGS58/exe/tp' failed with return code 12, check

/usr/sap/FCX/SUM/abap/log/SAPup.ECO for details'

...begin dialog at 20151126140724

...end dialog at 20151126141342

..answered at 20151126141342.

-> decided to try again but with exitcode threshold = 9

CURRENTPHASE MAIN_NEWBAS/XPRAS_AIMMRG

...started at 20151126141342

..times self: 6.710/1.470 usr/sys, children 0.400/0.550 usr/sys.

-> Auto_repeat is active, count down is 1.

..finished at 20151126141835 with status FAILED.

# Error message set: 'Detected 3 aborted activities in 'XPRASUPG.ELG'

Calling '/usr/sap/FCX/DVEBMGS58/exe/tp' failed with return code 12, check

/usr/sap/FCX/SUM/abap/log/SAPup.ECO for details'

CURRENTPHASE MAIN_NEWBAS/XPRAS_AIMMRG

...started at 20151126141835

..times self: 6.720/1.310 usr/sys, children 0.410/0.540 usr/sys.

..finished at 20151126142303 with status FAILED.

# Error message set: 'Detected 3 aborted activities in 'XPRASUPG.ELG'

Calling '/usr/sap/FCX/DVEBMGS58/exe/tp' failed with return code 12, check

/usr/sap/FCX/SUM/abap/log/SAPup.ECO for details'

...begin dialog at 20151126142308

.........................................

I have attached screen shots.

Accepted Solutions (1)

Accepted Solutions (1)

AtulKumarJain
Active Contributor
0 Kudos

Hi ,

What is your current system and kernel relase.

Please check sap note 1591607.

It seems you have to update your kernel.

BR

Atul

Former Member
0 Kudos

Thanks for the solution, applying kernel 720_EXT resolved our issue.

Answers (2)

Answers (2)

Former Member
0 Kudos

Hi Rajesh,

You need to use EXT kernel . Please check in PAM to find the compatible kernel  for Netweaver 7.3 EHP1 .

I could see that following kernel versions are compatible with netweaver 731

SAP KERNEL 7.20 EXT,

SAP KERNEL 7.21 EXT

SAP KERNEL  7.22 EXT

Please refer the SAP note #1591607.

You should also use higher version of tp and see if it helps.

Former Member
0 Kudos

Hello Rajesh,

Please check following sap note:-

1664235 - Investigating errors in XPRAS phase

I hope this helps you

Regards

Anand