on 06-02-2015 10:24 AM
Dear all,
Could you please help me to figure out why the disp+work.exe cannot start to achieve the phase "Start instance" during the installation process ?
When i display the traces files, i can see that the it is the no more work processes that cause the dispatcher shutdown.
I've tested the database connexion through r3trans -d, returning 0 errors.
I have tried many things :
increase virtual memory
maitain the hosts file
relaunch the installation
the situation is that the disp+work start for a few minutes then stop for unknown reason.
My configuration is :
Windows 7 x64 ultimate (i'm installing the SAP IDES ECC6 EHP4 directly in the localsystem, without virtual machine)
i7, 1000GB HDD
I have 12GB of RAM
Actually i'm under 20000 GB of virtual memory paging file (i've tried to increase it, even though set it to 150000 GB do not resolve the problem)
I've tried to add a parameter in the profile file (/sap/usr/SYS/profile/default.PFL) = PHYZ_MEMSIZE = 100%, in vain. (regarding this point, could you please confirm that it is the correct way to set the PHYZ_MEMSIZE parameter )
Thanks you for help.
Dear all,
a big thanks for you all especially to Isaias Freitas
Problem solved thanks to 2 notes :
1934023
In my case, the same problem is described in the first note (1934023). The second note is just for some details about the port configuration.
What i have done ?
Add a line in my default.PFL (profile file) : icm/admin_port = 10000
the port 10000 is free that's why i choose it. The main idea is to change the port from which the ICM establish the connection. In fact, basically it is configured to use the port 65000 but this port it's busy because of another windows application, therefore, ICM cannot connect, then the dispatcher shutdown. So defining a free port resolve the problem and allows ICM to establish connexion.
Hope that will help someone because as i see in the forum, there's a lot of problem about it.
THank you.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello,
Try starting SAP instance manually.
Refer basic troubleshooting steps from Juan's blog-
Maintain server entry in host file.
Disable internet and any active antivirus on your machine.
Error messages in posted logs seems related to network, check if you need to install loopback adapter in Windows.
If still fails, try replacing kernel with new/updated one.
Hope it helps.
Regards,
Ashish
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
I've performed steps as requested by SS but the problem still here.
Could you please tell what are the mandatory network parameters for SAP IDES installation ?
I think everything is good on my laptop.
I would also inform that i'm using the MS loopback adapter. And here is the shema of my laptop regarding installation if it could help :
Laptop with 2 sessions :
Session : MYZ-PC\MYZ with the database, and where i'm processing the installation
Session : MYZ-PC\zmyadm created through the SAP Installation
in the host file, i have following entries :
127.0.0.1 localhost
10.1.10.1 MYZ-PC
10.1.10.1 saptranshost
i tried keeping only the localhost line, no success. match saptranshost with 127.0.0.1, no success. I've also tried the ipconfig/ dnsflush, no success/
Please help; i'm losting hope to achieve successfully the installation.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
10054: WSAECONNRESET
Issue relates with network here.Try to locate any network issue at your end.You could follow recommendations as given by SS.
Hope this will resolve your issue.
Good luck !!
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi all,
thanks for these warm reactions.
As requested, please find below the files.
DEV_DISP :
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "701"
---------------------------------------------------
sysno 00
sid ZMY
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 32
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 6448
Tue Jun 02 20:23:22 2015
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 6448) [dpxxdisp.c 1286]
shared lib "dw_xml.dll" version 32 successfully loaded
shared lib "dw_xtc.dll" version 32 successfully loaded
shared lib "dw_stl.dll" version 32 successfully loaded
shared lib "dw_gui.dll" version 32 successfully loaded
shared lib "dw_mdm.dll" version 32 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Jun 02 20:23:28 2015
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MYZ-PC_ZMY_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007B80050, size: 6614144)
DpShMCreate: allocated sys_adm at 0000000007B80050
DpShMCreate: allocated wp_adm at 0000000007B82270
DpShMCreate: allocated tm_adm_list at 0000000007B896D0
DpShMCreate: allocated tm_adm at 0000000007B89730
DpShMCreate: allocated wp_ca_adm at 000000000812CFB0
DpShMCreate: allocated appc_ca_adm at 0000000008132DB0
DpShMCreate: allocated comm_adm at 0000000008134CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000081BB980
DpShMCreate: allocated gw_adm at 00000000081BBA00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 00000000081BBA30
DpShMCreate: allocated wall_adm at 00000000081BBA40
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 12206MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 12208MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 3051 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1681]
***LOG Q0K=> DpMsAttach, mscon ( MYZ-PC) [dpxxdisp.c 12483]
DpStartStopMsg: send start message (myname is >MYZ-PC_ZMY_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 32
Release check o.K.
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4436]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1152
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:65000) [nixxi.cpp 4436]
*** ERROR => DpIcmMsgProcess: IcmRecMsg (rc=-8,-6) [dpxxdisp.c 19007]
Tue Jun 02 20:24:08 2015
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:18 2015
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Jun 02 18:24:18 2015
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-------------------------------------------------------------------------------------------------------------------------------
0 DIA 5712 Ended no 1 0 0
1 DIA 4352 Ended no 1 0 0
2 DIA 4504 Ended no 1 0 0
3 DIA 8024 Ended no 1 0 0
4 DIA 4884 Ended no 1 0 0
5 DIA 8056 Ended no 1 0 0
6 DIA 3872 Ended no 1 0 0
7 DIA 7844 Ended no 1 0 0
8 DIA 4472 Ended no 1 0 0
9 DIA 1732 Ended no 1 0 0
10 UPD 1056 Ended no 1 0 0
11 ENQ 2308 Ended no 1 0 0
12 BTC 5340 Ended no 1 0 0
13 BTC 5980 Ended no 1 0 0
14 BTC 5532 Ended no 1 0 0
15 SPO 6788 Ended no 1 0 0
16 UP2 6932 Ended no 1 0 0
Dispatcher Queue Statistics Tue Jun 02 18:24:18 2015
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 1 | 2 | 2000 | 14 | 13 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 1 | 1 | 2000 | 1 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 13
wake_evt_udp_now 0
wake events total 10, udp 9 ( 90%), shm 1 ( 10%)
since last update total 10, udp 9 ( 90%), shm 1 ( 10%)
Dump of tm_adm structure: Tue Jun 02 18:24:18 2015
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Jun 02 18:24:18 2015
=============================
Slots: 300, Used: 2, Max: 1
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
| 195 | DISPATCHER | -1 | *WPCAAD195* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:23 2015
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >MYZ-PC_ZMY_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (780) (SOFT_KILL)
Stop icman
killing process (5372) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:780 HANDLE:1040)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:24 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:780 HANDLE:1040)
wait for end of icman
[DpProcDied] Process lives (PID:5372 HANDLE:1048)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:25 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5372 HANDLE:1048)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:26 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5372 HANDLE:1048)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:27 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5372 HANDLE:1048)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:28 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5372 HANDLE:1048)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:29 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5372 HANDLE:1048)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:30 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5372 HANDLE:1048)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:31 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5372 HANDLE:1048)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:32 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5372 HANDLE:1048)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:33 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5372 HANDLE:1048)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:34 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5372 HANDLE:1048)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1153
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jun 02 20:24:35 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:5372 HANDLE:1048)
DpStartStopMsg: send stop message (myname is >MYZ-PC_ZMY_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=MYZ-PC_ZMY_00 , sapsysnr= 0, hostname=MYZ-PC
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Jun 02 20:24:36 2015
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12829]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1036 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1036 (pos=2)
SiSelNRemove: removed sock 1036
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1036
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 6448) [dpxxdisp.c 11045]
Good Bye .....
________________________________________________________________________
________________________________________________________________________
Here is the last dev_wX, the dev_w0 :
---------------------------------------------------
trc file: "dev_w0", trc level: 1, release: "701"
---------------------------------------------------
*
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
*
B
B Tue Jun 02 20:23:28 2015
B create_con (con_name=R/3)
B Loading DB library 'G:\usr\sap\ZMY\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'G:\usr\sap\ZMY\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'G:\usr\sap\ZMY\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.31)
B New connection 0 created
M sysno 00
M sid ZMY
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 32
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 5712
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5712) [dpxxdisp.c 1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007D00050, size: 6614144)
M DpShMCreate: allocated sys_adm at 0000000007D00050
M DpShMCreate: allocated wp_adm at 0000000007D02270
M DpShMCreate: allocated tm_adm_list at 0000000007D096D0
M DpShMCreate: allocated tm_adm at 0000000007D09730
M DpShMCreate: allocated wp_ca_adm at 00000000082ACFB0
M DpShMCreate: allocated appc_ca_adm at 00000000082B2DB0
M DpShMCreate: allocated comm_adm at 00000000082B4CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000833B980
M DpShMCreate: allocated gw_adm at 000000000833BA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000833BA30
M DpShMCreate: allocated wall_adm at 000000000833BA40
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host MYZ-PC
M calling db_connect ...
C Callback functions for dynamic profile parameter registered
C Thread ID:5620
C Thank You for using the SLODBC-interface
C Using dynamic link library 'G:\usr\sap\ZMY\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 31
C patchcomment Handle long parameters as LOBs (1296540)
C Local connection used on MYZ-PC to named instance: lpc:MYZ-PC\MYZ_SAP
C Local connection used on MYZ-PC to named instance: lpc:MYZ-PC\MYZ_SAP
C Driver: sqlncli10.dll Driver release: 10.00.1600
C GetDbRelease: 10.00.1600
C GetDbRelease: Got DB release numbers (10,0,1600)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20150602 202328 MYZ-PC\MYZ_SAP
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.swc,*.swf
I
I Tue Jun 02 20:23:29 2015
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 00000000161E0050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FED3840050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000016620050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001E630050, size: 2678942)
M SHM_PAGING_ADM (addr: 0000000011560050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 00000000117C0050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 00000000029D0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 000000001E8C00E0, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 000000001E8C0330, size: 320072)
B dbntab: Buffer FTAB(item array) (addr: 000000001E90E580, size: 1280000)
B dbntab: Buffer FTAB(data area) (addr: 000000001EA46D80, size: 30720000)
B dbntab: Buffer IREC(hash header) (addr: 00000000207A00E0, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 00000000207A0330, size: 320072)
B dbntab: Buffer IREC(item array) (addr: 00000000207EE580, size: 320000)
B dbntab: Buffer IREC(data area) (addr: 000000002083C780, size: 6144000)
B dbntab: Buffer STAB(hash header) (addr: 0000000020E200E0, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0000000020E20330, size: 320072)
B dbntab: Buffer STAB(item array) (addr: 0000000020E6E580, size: 320000)
B dbntab: Buffer STAB(data area) (addr: 0000000020EBC780, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 00000000211B00E0, size: 2360)
B dbntab: Buffer TTAB(anchor array) (addr: 00000000211B0A20, size: 320072)
B dbntab: Buffer TTAB(item array) (addr: 00000000211FEC70, size: 800000)
B dbntab: Buffer TTAB(data area) (addr: 00000000212C2170, size: 5840000)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 17, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 000000002186D0B0)
B dbtbxbuf: Buffer TABL (addr: 00000000247A0160, size: 30000000, end: 000000002643C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000026440160, size: 10240000, end: 0000000026E04160)
B dbexpbuf: Buffer EIBUF (addr: 0000000026E10170, size: 4194304, end: 0000000027210170)
B dbexpbuf: Buffer ESM (addr: 0000000027220170, size: 4194304, end: 0000000027620170)
B dbexpbuf: Buffer CUA (addr: 0000000027630170, size: 3072000, end: 000000002791E170)
B dbexpbuf: Buffer OTR (addr: 0000000027920170, size: 4194304, end: 0000000027D20170)
B dbcalbuf: Buffer CALE (addr: 0000000002F80050, size: 500000, end: 0000000002FFA170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates inside critical section: event_update_nocsec = 0
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000002D01E6F0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0000000011F700D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000011F70610
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 20832kb, dir_size: 20764kb.
A Attached to PXA (address 000007FEE3870050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDED2D000 leng=20955136 end=000007FFE0129000)
A >> Shm MMADM area (addr=000007FFDF1D5F00 leng=247168 end=000007FFDF212480)
A >> Shm MMDAT area (addr=000007FFDF213000 leng=15818752 end=000007FFE0129000)
A RFC Destination> destination MYZ-PC_ZMY_00 host MYZ-PC system ZMY systnr 0 (MYZ-PC_ZMY_00)
A RFC Options> H=MYZ-PC,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 35354 bytes at 0000000002A30050
N SsfSapSecin: putenv(SECUDIR=G:\usr\sap\ZMY\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is G:\usr\sap\ZMY\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
C ERROR: -1 in function StartSelect (execute) [line 9700]
C (208) [42S02] [Microsoft][SQL Server Native Client 10.0][SQL Server]Nom d'objet 'IACFL' non valide.
C ERROR: -1 in function StartSelect (execute) [line 9700]
C (8180) [42000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Impossible de préparer les instructions.
B ***LOG BZA=> table IACFL does not exist on database R/3 [dbtran#3 @ 7505] [dbtran 7505 ]
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 701, [7010.0.32.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [20]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume MYZ-PC_ZMY_00
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4436]
M *** ERROR => NiIRead: SiRecv failed for hdl 0 / sock 1560
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:65000) [nixxi.cpp 4436]
M *** ERROR => IcmReadAck: receive acknowledge failed (-8/-6) [icxxext.c 384]
M *** ERROR => ThPlgConnectToIcm: IcmReadAck failed (-8, ni_rc=-6) [thxxplg.c 4817]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 5712
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5712) [dpnttool.c 334]
thanks
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
1. On Windows OS just add the local host enter.
2. On windows OS have you install the any antivirus with network protection? just disable the antivirus and the retry the same installation phase
3. DB instance on same or different hardware? if it is different hardware pls check the network connection?
BR
SS
Hello,
From the dev_disp trace:
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1152
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:65000) [nixxi.cpp 4436]
*** ERROR => DpIcmMsgProcess: IcmRecMsg (rc=-8,-6) [dpxxdisp.c 19007]
The root cause would be related to the ICM process.
Please share the contents of the dev_icm trace.
Regards,
Isaías
HELLO Isaias,
I believe also that ICM is concerned by this issue but really i don't have the necessary skills to reach the root cause.
Here is the ICM trace, thank you for help :
---------------------------------------------------
trc file: "dev_icm", trc level: 1, release: "701"
---------------------------------------------------
sysno 00
sid ZMY
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 25
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 4768
[Thr 5088] started security log to file dev_icm_sec
[Thr 5088] ICM running on: MYZ-PC
[Thr 5088] MtxInit: 30001 0 2
[Thr 5088] IcmInit: listening to admin port: 65000
[Thr 5088] DpSysAdmExtCreate: ABAP is active
[Thr 5088] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
[Thr 5088] DpShMCreate: sizeof(wp_adm) 29792 (1752)
[Thr 5088] DpShMCreate: sizeof(tm_adm) 5912704 (29416)
[Thr 5088] DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
[Thr 5088] DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
[Thr 5088] DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
[Thr 5088] DpShMCreate: sizeof(comm_adm) 552080 (1088)
[Thr 5088] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
[Thr 5088] DpShMCreate: sizeof(slock_adm) 0 (104)
[Thr 5088] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
[Thr 5088] DpShMCreate: sizeof(file_adm) 0 (72)
[Thr 5088] DpShMCreate: sizeof(vmc_adm) 0 (1864)
[Thr 5088] DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
[Thr 5088] DpShMCreate: sizeof(gw_adm) 48
[Thr 5088] DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000026A0050, size: 6614144)
[Thr 5088] DpShMCreate: allocated sys_adm at 00000000026A0050
[Thr 5088] DpShMCreate: allocated wp_adm at 00000000026A2270
[Thr 5088] DpShMCreate: allocated tm_adm_list at 00000000026A96D0
[Thr 5088] DpShMCreate: allocated tm_adm at 00000000026A9730
[Thr 5088] DpShMCreate: allocated wp_ca_adm at 0000000002C4CFB0
[Thr 5088] DpShMCreate: allocated appc_ca_adm at 0000000002C52DB0
[Thr 5088] DpShMCreate: allocated comm_adm at 0000000002C54CF0
[Thr 5088] DpShMCreate: system runs without slock table
[Thr 5088] DpShMCreate: system runs without file table
[Thr 5088] DpShMCreate: allocated vmc_adm_list at 0000000002CDB980
[Thr 5088] DpShMCreate: allocated gw_adm at 0000000002CDBA00
[Thr 5088] DpShMCreate: system runs without vmc_adm
[Thr 5088] DpShMCreate: allocated ca_info at 0000000002CDBA30
[Thr 6648] IcmProxyWatchDog: proxy watchdog started
[Thr 5088] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
[Thr 5088] IcmCreateWorkerThreads: created worker thread 0
[Thr 5088] IcmCreateWorkerThreads: created worker thread 1
[Thr 5088] IcmCreateWorkerThreads: created worker thread 2
[Thr 5088] IcmCreateWorkerThreads: created worker thread 3
[Thr 5088] IcmCreateWorkerThreads: created worker thread 4
[Thr 5088] IcmCreateWorkerThreads: created worker thread 5
[Thr 5088] IcmCreateWorkerThreads: created worker thread 6
[Thr 5088] IcmCreateWorkerThreads: created worker thread 7
[Thr 5088] IcmCreateWorkerThreads: created worker thread 8
[Thr 5088] IcmCreateWorkerThreads: created worker thread 9
[Thr 7140] IcmWatchDogThread: watchdog started
[Thr 2040] *** WARNING => HttpPlugInInit: Parameter icm/HTTPS/trust_client_with_issuer or icm/HTTPS/trust_client_with_subject not set => do not trust any intermediary
X.509 cert data will be removed from header [http_plg.c 723]
[Thr 2040] ISC: created 400 MB disk cache.
[Thr 2040] ISC: created 50 MB memory cache.
[Thr 2040] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0
[Thr 2040] HttpExtractArchive: files from archive G:\usr\sap\ZMY\DVEBMGS00\exe/icmadmin.SAR in directory G:/usr/sap/ZMY/DVEBMGS00/data/icmanroot are up to date
[Thr 2040] HttpSubHandlerAdd: Added handler HttpAdminHandler(slot=1, flags=4101) for /sap/admin:0
[Thr 2040] CsiInit(): Initializing the Content Scan Interface
[Thr 2040] PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
[Thr 2040] CsiInit(): CSA_LIB = "G:\usr\sap\ZMY\DVEBMGS00\exe\sapcsa.dll"
[Thr 2040] HttpSubHandlerAdd: Added handler HttpAuthHandler(slot=2, flags=12293) for /:0
[Thr 2040] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=3, flags=1052677) for /:0
[Thr 2040] Started service 8000 for protocol HTTP on host "MYZ-PC"(on all adapters) (processing timeout=60, keep_alive_timeout=30)
[Thr 2040] Wed Jun 03 21:06:59 2015
[Thr 2040] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 10 seconds [icxxman.c 4590]
[Thr 2040] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxman.c 4646]
[Thr 7140] Wed Jun 03 21:07:45 2015
[Thr 7140] IcmWatchDogThread: Shutdown request received
[Thr 7140] IcmConnCancel: Connection (id=1/2) canceled manually
[Thr 7140] *** IcmWatchDogThread: exit thread ***
[Thr 5088] IcmLoop: Shutdown request received
[Thr 5088] Deactivated service 8000 for protocol HTTP on host: "MYZ-PC"(on all adapters) (timeout=30)
[Thr 5088] Deactivated service 0 for protocol SMTP on host: "MYZ-PC"(on all adapters) (timeout=30)
[Thr 5088] IcmHandleShutdownEvent: Thread 0 still in status ICM_THR_STATUS_RUN
[Thr 5088] Wed Jun 03 21:07:46 2015
[Thr 5088] IcmHandleShutdownEvent: Thread 0 still in status ICM_THR_STATUS_RUN
[Thr 5088] Wed Jun 03 21:07:47 2015
[Thr 5088] IcmHandleShutdownEvent: Thread 0 still in status ICM_THR_STATUS_RUN
[Thr 5088] Wed Jun 03 21:07:48 2015
[Thr 5088] IcmHandleShutdownEvent: Thread 0 still in status ICM_THR_STATUS_RUN
[Thr 5088] Wed Jun 03 21:07:49 2015
[Thr 5088] IcmHandleShutdownEvent: Thread 0 still in status ICM_THR_STATUS_RUN
[Thr 6648] IcmProxyWatchDog: Shutdown request received
[Thr 6648] *** IcmProxyWatchDog: exit thread ***
[Thr 5088] Wed Jun 03 21:07:50 2015
[Thr 5088] IcmHandleShutdownEvent: Thread 0 still in status ICM_THR_STATUS_RUN
[Thr 5088] Wed Jun 03 21:07:51 2015
[Thr 5088] IcmHandleShutdownEvent: Thread 0 still in status ICM_THR_STATUS_RUN
[Thr 5088] Wed Jun 03 21:07:52 2015
[Thr 5088] IcmHandleShutdownEvent: Thread 0 still in status ICM_THR_STATUS_RUN
[Thr 5088] Wed Jun 03 21:07:53 2015
[Thr 5088] IcmHandleShutdownEvent: Thread 0 still in status ICM_THR_STATUS_RUN
[Thr 5088] Wed Jun 03 21:07:54 2015
[Thr 5088] IcmHandleShutdownEvent: Thread 0 still in status ICM_THR_STATUS_RUN
[Thr 5088] Wed Jun 03 21:07:55 2015
[Thr 5088] IcmConnCancelAll: Connection (id=1/2) canceled
[Thr 5088] IcmConnCancelAll: Connection (id=0/1) canceled
[Thr 5088] Wed Jun 03 21:07:56 2015
[Thr 5088] Removed service 8000 for protocol HTTP on host: "MYZ-PC"(on all adapters) (timeout=30)
[Thr 5088] Removed service 0 for protocol SMTP on host: "MYZ-PC"(on all adapters) (timeout=30)
[Thr 5088] *** ICM shutdown completed (pid: 4768) ***
Hi,
Please share the required as requested by other SCN members, otherwise it would be difficult to support you on the issue.
Regards,
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
Just do the full system restart and then try again in the same phase.
BR
SS
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi Yaz,
Can you please provide us with the dev_disp, dev_w0, dev_w11( any latest dev_w) log files so that we can help you in better manner.
Regards,
Ram
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
87 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.