KPI modeler

[Former Member]

We have a SAP HANA(1.00.094.00.1427101515) and an ERP on it. We although installed FIORI Smart Business. Our Basis did configure SAP HANA, SAP WebDispatcher, SAP Frontend Server / SAP Backend  Server (same server) and FIORI Launchpad.

But when we launch fiori via launchpad, we see that the KPI Modeler doesn't start up. We see only blank KPI Tiles (see picture belo)

Further, we did debug and figure out that that our GET is failing with 404 error...

the respective URL is as below:

http://xxxxxxx.xxxxxx.xxx.xxx.com:50003/sap/hba/r/sb/core/odata/modeler/SMART_BUSINESS.xsodata;o=HAN...

we went ahead and checked our services in backend, fixed couple of OSS notes but still the issue continues...

Can any one help here?

[former_member312987]

Setting up the SAP Smart Business Modeler Apps Framework - User Interface Add-On for SAP NetWeaver -...

• Note The following catalogs, groups, and roles are relevant:
  • Catalog  /UI2/SAP_KPIFRW5_TC_S for SAP Smart Business runtime
  • Catalog  /UI2/SAP_KPIFRW5_TC_R for SAP Smart Business runtime. All KPIs that were modeled and activated using the KPI modeler are automatically added to a predefined KPI catalog. You cannot change the catalog by using the SAP Fiori Launchpad Designer
  • Catalogs  /UI2/SAP_KPIMOD_TC_S and  /UI2/SAP_KPIMOD_TC_R for KPI modeling
  • Group  /UI2/SAP_KPIMOD_TCG_S contains the SAP Smart Business modeler apps
  • Role  /UI2/SAP_KPIFRW5_TCR_S for SAP Smart Business runtime
  • Role  /UI2/SAP_KPIMOD_TCR_S for KPI modeling

[benlim]

Hi Raquel,

I have assign the role to the respective user and done the config in catalog and group but still getting the errors.

This is my sample screen-shot on my kpi modeler group config page. The tile still cannot load.

[kammaje_cis]

Yen, You seem to have solved this. (assuming form your other post). How did you solve? Web Dispatcher config?

[benlim]

Hi Krishna,

I still have't solved the problem..These are the problem I'm facing now togather with the other post. The sample screen-shot above is to config group and catalog but it's still fail to load kpi. The other post is the kpi modeler URL for KPI configuration. There is backend issues. I'm still not get what is the backend issues.

[former_member312987]

Hi

Can you press the F12 and check the errors in the Console and Network

Saludos

Raquel

[benlim]

Hi Raquel,

Below are my screen-shot for console and network.

Rgrds,

-Ben-

[former_member312987]

Have you done :

SAP Smart Business Modeler Apps

Roles

You must be assigned the following roles to use SAP Smart Business applications:

SAP HANA Roles	SAP ABAP Roles
sap.hba.r.sb.core.roles::SAP_SMART_BUSINESS_MODELER	/UI2/SAP_KPIMOD_TCR_S
sap.hba.r.sb.core.roles::SAP_SMART_BUSINESS_RUNTIME	/UI2/SAP_KPIFRW5_TCR_S

[benlim]

Hi Raquel,

I have done the above role assignment to my user but still still getting the error as the screen-shot above.

[benlim]

Hi Raquel,

I face an error after inspect element "Remote catalog did not deliver CHIP 'SAP_SB_MODELER_ASSOCIATION'" as shown below.

Do you guys face this similar issues?

Regards,

-Ben-

[kammaje_cis]

Yen, we have this issue right now and we are exploring with SAP.

What I found is that calculation views which gives these tiles are empty. Also catalogs are faulty.

Let me know if you get to solve this before.

[kammaje_cis]

In my case, the faulty system is missing below entries.

Your system also might be missing this.

[benlim]

Hi Krishna,

My system have missing these components. Do I missing some component installation or setup?

[kammaje_cis]

Go here

host:port/sap/hana/xs/lm/

-> Transport -> Logs

Most probably you might have errors there for HCO_HBA_R_SB_CORE (sap.com).

[benlim]

Yes, I have this error for 'HCO_HBA_ECC (sap.com)' when checking the log. What does this error mean and what can this page perform any error analysis?

[kammaje_cis]

       Note 2158380 will help you. Anyway its contents ar enot easy to understand. We are analysing this not currently to solve problem in one of our systems.

[benlim]

Hi Krishna,

After following your guide on installing the missing package 'HCO_HBA_R_SB_CORE', all the entries you stated above is now showing in CHIPS_MODELER_APPS. However, now I have a different error message when i inspect element. (Error 403 forbidden)

[kammaje_cis]

So what is the detailed error on Developer tools?

[MPS4HANA]

This message was moderated.

[Former Member]

This message was moderated.

[Former Member]

This message was moderated.

[jcunhajr]

Hi

did you solve the issue ?

we are facing the same behaviour

best regards

Jaime

[Former Member]

Hi Krishna,

Did you resolve the issue?

We're also struggling with the same one.

Any hints, please?

Thanks & best regards,

Sreenu

[markus_karsch5]

Hello all,

if you get error 404 for /sap/hba/* requests, it is solved by configuring routing in WebDispatcher like below and starting launchpad with your WebDispatcher server+port:

wdisp/system_0 = SID=EJQ, MSHOST=yoursap.domain.com, MSPORT=8101, SRCURL=/sap/bc;/sap/ui2;/sap/ushell;/sap/public;/sap/opu

wdisp/system_2= SID=EXT, XSSRV=http://yourhana.domain.com:8000, SRCURL=/sap/hba;/sap/hana

if you get 403 (forbidden) you must assign roles like sap.hba.r.sb.core.roles::SAP_SMART_BUSINESS*.

Regards

Markus

[Former Member]

Hi All,

Is this problem resolved?  If so, please let me also know how it was resolved as I am facing the same problem.

I have assigned the HANA roles as well.  But no use.

sap.hba.r.sb.core.roles::SAP_SMART_BUSINESS_MODELER

sap.hba.r.sb.core.roles::SAP_SMART_BUSINESS_RUNTIME

Regards,

Ganga

[Former Member]

Hi All,

I have tried with more authorizations, but no improvement.  I have assigned the below roles.

[Former Member]

In launchpad I am getting the tiles like this.

Let me know if you people are able to resolve this already and how did you do that?

Thanks

Ganga

[Former Member]

missing the screen

[markus_karsch5]

Hi Ganga,

you need to check if you can see any http errors in developer console of your browser.

Regards

Markus

[Former Member]

Hi Ganga,

Please check your web dispatcher settings, it should point to your HANA DB with HANA instance ID.

Regards

Saket

[Former Member]

Thanks a lot Saket.  Now I am able to access.

[masa_139]

Hi Gagan,

Have you configured SAP Web Dispatcher to route requests to the HANA?

Regards,

Masa / SAP Technology RIG

[benlim]

Hi Masa,

I still encounter the same error although have configure SAP Web Dispatcher. Do you have any idea? When I inspect element from Chrome, I get error 404. 

[kammaje_cis]

Yen,

This is most probably due to missing HANA authorizations. Ensure that you have below in HANA.

sap.hba.r.sb.core.roles::SAP_SMART_BUSINESS_MODELER

sap.hba.r.sb.core.roles::SAP_SMART_BUSINESS_RUNTIME

sap.hba.tools.auth.roles::AnalyticsAuthorizationDeveloper

AnalyticsAuthorizationAdministrator

[benlim]

Hi Krishna,

I already added these role in HANA but still did't get any changes.

[Former Member]

Hi Krishna,

I can not find the below roles in HANA Studio as shown in image:

sap.hba.r.sb.core.roles::SAP_SMART_BUSINESS_MODELER

sap.hba.r.sb.core.roles::SAP_SMART_BUSINESS_RUNTIME

Regards

Saket