on 04-16-2015 7:22 AM
Hello,
We have SAP ECC installed on our Windows 2012 R2 virtual machine. When I go to start the ECC system from the SAP MMC the disp+work.exe process is yellow and then grey out as stopped. I have just upgraded our version of SQL Server from Evaluation to Standard as i thought this dated installation was the issue..... obviously not!
Below is the dev_disp log file - any help would be greatly appreciated.
Thanks in advance
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "741"
---------------------------------------------------
sysno 00
sid ECC
systemid 562 (PC with Windows NT)
relno 7410
patchlevel 0
patchno 11
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SAPVIAMSAZURE\sapmnt\ECC\SYS\profile\ECC_DVEBMGS00_SAPVIAMSAZURE
pid 3136
Thu Apr 16 13:43:14 2015
kernel runs with dp version 197000(ext=117000) (@(#) DPLIB-INT-VERSION-197000-UC)
length of sys_adm_ext is 500 bytes
***LOG Q00=> DpSapEnvInit, DPStart (00 3136) [dpInit.c 574]
Thu Apr 16 13:43:15 2015
shared lib "dw_xml.dll" version 11 successfully loaded
shared lib "dw_xtc.dll" version 11 successfully loaded
shared lib "dw_stl.dll" version 11 successfully loaded
shared lib "dw_gui.dll" version 11 successfully loaded
shared lib "dw_mdm.dll" version 11 successfully loaded
shared lib "dw_rndrt.dll" version 11 successfully loaded
shared lib "dw_abp.dll" version 11 successfully loaded
DpCheckMulticast: check of IP v4 multicast address o.k.
rdisp/softcancel_sequence : -> 0,5,-5
use internal message server connection to port 3901
rdisp/shutdown/disable_login : 0
rdisp/snapshot(CREATE): DP_CS_RESOURCES_EXHAUSTED
rdisp/snapshot(PERIOD):300 sec
rdisp/snapshot(LINES):10000 lines
DpCommonParamInit: rdisp/core_file_size = default --> no change
Thu Apr 16 13:43:19 2015
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 4952]
MtxInit: 30000 0 0
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SAPVIAMSAZURE_ECC_00 <
DpShMCreate: alloate/attach shared memory (mode=CREATE)
DpShMCreate: sizeof(wp_adm) 22848 (1088)
DpShMCreate: sizeof(tm_adm) 49394544 (245744)
DpShMCreate: sizeof(ca_adm) 432000 (72)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
DpShMCreate: sizeof(comm_adm) 7583152 (14912)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
DpShMCreate: sizeof(sock_adm) 520080 (1016)
DpShMCreate: sizeof(vmc_adm) 0 (3208)
DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
DpShMCreate: sizeof(websocket_adm) (ft=25664/hd=64/rec=232)
DpShMCreate: sizeof(gw_adm) 64
DpShMCreate: sizeof(j2ee_adm) 3936
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000FE60050, size: 58350720)
DpShMCreate: allocated sys_adm at 000000000FE60250
DpShMCreate: allocated wp_adm_list at 000000000FE71CE0
DpShMCreate: allocated wp_adm at 000000000FE72000
DpShMCreate: allocated tm_adm_list at 000000000FE77B40
DpShMCreate: allocated tm_adm at 000000000FE77D80
DpShMCreate: allocated ca_adm at 0000000012D932F0
DpShMCreate: allocated comm_adm at 0000000012DFCC70
DpShMCreate: system runs without slock table
DpShMCreate: allocated sock_adm at 0000000013538420
DpShMCreate: allocated vmc_adm_list at 00000000135B75B0
DpShMCreate: system runs without VMC
DpShMCreate: allocated gw_adm at 00000000135B7850
DpShMCreate: allocated j2ee_adm at 00000000135B7A90
DpShMCreate: allocated ca_info at 00000000135B8BF0
DpShMCreate: allocated wall_adm (ft) at 00000000135B8E30
DpShMCreate: allocated wall_adm (fi) at 00000000135C32F0
DpShMCreate: allocated wall_adm (head) at 00000000135D3C80
DpShMCreate: allocated amc_rec_adm (ft) at 00000000135D3EC0
DpShMCreate: allocated amc_rec_adm (fi) at 00000000135E9280
DpShMCreate: allocated amc_rec_adm (head) at 00000000135F9C10
DpShMCreate: allocated websocket_adm (ft) at 00000000135F9E50
DpShMCreate: allocated websocket_adm (head) at 0000000013600490
DpShMCreate: initialized 21 eyes
DpSysAdmIntInit: initialize sys_adm
Scheduler info
--------------
WP info
#dia = 10
#btc = 0
#standby = 0
#max = 21
General Scheduler info
preemptionInfo.isActive = true
preemptionInfo.timeslice = 500
preemptionInfo.checkLoad = true
Prio Class High
maxRuntime[RQ_Q_PRIO_HIGH] = 600 sec
maxRuntimeHalf[RQ_Q_PRIO_HIGH] = 300 sec
Prio Class Normal
maxRuntime[RQ_Q_PRIO_NORMAL] = 3600 sec
maxRuntimeHalf[RQ_Q_PRIO_NORMAL] = 1800 sec
maxTicketsForPrio[RQ_Q_PRIO_NORMAL] = 8
withPrioTickets[RQ_Q_PRIO_NORMAL] = true
Prio Class Low
maxRuntime[RQ_Q_PRIO_LOW] = infinite
maxRuntimeHalf[RQ_Q_PRIO_LOW] = infinite
maxTicketsForPrio[RQ_Q_PRIO_LOW] = 8
withPrioTickets[RQ_Q_PRIO_LOW] = true
DpCommAttachTable: attached comm table (header=0000000012DFCC70/ft=0000000012DFCC80/fi=000000001351B100)
DpSockAttachTable: attached sock table (header=0000000013538420/ft=0000000013538430)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpSockInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 21 initializing ....
<ES> EsILock: use Semphore 33 for locking
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 10035MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 10036MB
<ES> Info: disclaim threshold = 0 MB
<ES> Info: disclaim coasting/alloc = 300 s
<ES> Info: disclaim coasting/free = 0 s
<ES> Info: blockdisclaimsize_KB = 0 KB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2508 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
rdisp/calculateLoadAverage : 1
***LOG Q0K=> DpMsAttach, mscon ( SAPVIAMSAZURE) [dpMessageSer 1637]
DpStartStopMsg: send start message (myname is >SAPVIAMSAZURE_ECC_00 <)
DpStartStopMsg: start msg sent to message server o.k.
MBUF state LOADING
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=6395 reserved=1918 quota=10%
CCMS: Initialized monitoring segment of size 60000000.
CCMS: Initialized CCMS Headers in the shared monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
Thu Apr 16 13:43:21 2015
CCMS: AlMsUpload successful for G:\usr\sap\ECC\DVEBMGS00\log\ALMTTREE.DAT (5694 MTEs).
Thu Apr 16 13:43:22 2015
CCMS: start to initalize 3.X shared alert area (first segment).
DpCheckPreemptionTicker: created thread for DpPremptionTicker
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1140]
MBUF state ACTIVE
DpMBufTypeMod: MBUF component UP (event=MBUF_DPEVT_UP)
DpMsgProcess: 1 server in MBUF
DpMsCheckServices()
DpMsCheckServices: send DpDelService(J2EE) to msgserver
DpMsgProcess: MBUF state is MBUF_ACTIVE
DpMBufReset: state = MBUF_PREPARED
Thu Apr 16 13:43:59 2015
*** ERROR => DpHdlDeadWp: W0 (pid 4116) died (severity=0, status=0) [dpxxwp.c 1278]
********** SERVER SNAPSHOT 1 (Reason: Workprocess 0 died) - begin **********
Scheduler info
--------------
WP info
DpNumberOfDiaWps: dia_wps 9, standby_wps 0
#dia = 9
#btc = 3
#standby = 0
#max = 21
General Scheduler info
preemptionInfo.isActive = true
preemptionInfo.timeslice = 500
preemptionInfo.checkLoad = true
Prio Class High
maxRuntime[RQ_Q_PRIO_HIGH] = 600 sec
maxRuntimeHalf[RQ_Q_PRIO_HIGH] = 300 sec
Prio Class Normal
maxRuntime[RQ_Q_PRIO_NORMAL] = 3600 sec
maxRuntimeHalf[RQ_Q_PRIO_NORMAL] = 1800 sec
maxTicketsForPrio[RQ_Q_PRIO_NORMAL] = 8
withPrioTickets[RQ_Q_PRIO_NORMAL] = true
Prio Class Low
maxRuntime[RQ_Q_PRIO_LOW] = infinite
maxRuntimeHalf[RQ_Q_PRIO_LOW] = infinite
maxTicketsForPrio[RQ_Q_PRIO_LOW] = 8
withPrioTickets[RQ_Q_PRIO_LOW] = true
Actual tickets in use
actTicketsInUseForPrio[RQ_Q_PRIO_NORMAL] = 0
actTicketsInUseForPrio[RQ_Q_PRIO_LOW] = 0
Queue Statistics Thu Apr 16 05:43:59 2015
------------------------------------------------------------
Number of lost wakeup datagrams: 0
Max. number of queue elements : 14000
NOWP: 0 (peak 5, writeCount 8, readCount 😎
DIA: 4 (peak 4, writeCount 4, readCount 0)
UPD: 0 (peak 0, writeCount 0, readCount 0)
ENQ: 0 (peak 0, writeCount 0, readCount 0)
BTC: 0 (peak 0, writeCount 0, readCount 0)
SPO: 0 (peak 0, writeCount 0, readCount 0)
UP2: 0 (peak 0, writeCount 0, readCount 0)
Session queue dump (high priority, 1 elements, peak 1):
-1 <- 26 < EmbryoQueue_DIA> -> -1
Session queue dump (normal priority, 0 elements, peak 0):
Session queue dump (low priority, 0 elements, peak 0):
Dump of queue <EmbryoQueue_DIA> in slot 26 (4 requests, port=0):
-1 <- 4 (rq_id 7, DIA, REQ_HANDLER_AUTOTH) -> 5
4 <- 5 (rq_id 9, DIA, REQ_HANDLER_MSADM) -> 2
5 <- 2 (rq_id 13, DIA, REQ_HANDLER_AUTOABAP) -> 3
2 <- 3 (rq_id 15, DIA, REQ_HANDLER_BGRFC_WATCHDOG) -> -1
Infos about some special queues:
Queue <DispatcherQueue> in slot 0 (port=59767) has no requests
Queue <GatewayQueue> in slot 1 (port=0) has no requests
Queue <IcmanQueue> in slot 2 (port=51399) has no requests
Queue <StartServiceQueue> in slot 3 (port=0) has no requests
Workprocess Table (long) Thu Apr 16 05:43:59 2015
------------------------------------------------------------
Current snapshot id: 1
Number of preemptions : 0
|No |Pid |Type|State |Cause|Err|Prio|Sess-Key |Sess-Type|Locked|Sem|Time |Program |Cli|User |Action |Action-Info |
|---+------+----+-------+-----+---+----+----------------+---------+------+---+-----+----------------------------------------+---+------------+--------------------+--------------------|
| 0| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 1|4416 |DIA |WP_NEW | | | | | | | | | | | | | |
| 2|744 |DIA |WP_NEW | | | | | | | | | | | | | |
| 3|1156 |DIA |WP_NEW | | | | | | | | | | | | | |
| 4|4412 |DIA |WP_NEW | | | | | | | | | | | | | |
| 5|2264 |DIA |WP_NEW | | | | | | | | | | | | | |
| 6|872 |DIA |WP_NEW | | | | | | | | | | | | | |
| 7|4672 |DIA |WP_NEW | | | | | | | | | | | | | |
| 8|4700 |DIA |WP_NEW | | | | | | | | | | | | | |
| 9|4660 |DIA |WP_NEW | | | | | | | | | | | | | |
| 10|1696 |UPD |WP_NEW | | | | | | | | | | | | | |
| 11|4484 |BTC |WP_NEW | | | | | | | | | | | | | |
| 12|4944 |BTC |WP_NEW | | | | | | | | | | | | | |
| 13|5060 |BTC |WP_NEW | | | | | | | | | | | | | |
| 14|968 |SPO |WP_NEW | | | | | | | | | | | | | |
| 15|4408 |UP2 |WP_NEW | | | | | | | | | | | | | |
Session Table Thu Apr 16 05:43:59 2015
------------------------------------------------------------
No logons/sessions found
CA Blocks
0 INVALID -1
1 ca_blk slots of 6000 in use, 1 currently unowned (in request queues)
********** SERVER SNAPSHOT 1 (Reason: Workprocess 0 died) - end **********
***LOG Q41=> DpDumpInternalTables, () [dpxxdisp.c 3200]
*** ERROR => DpHdlDeadWp: W1 (pid 4416) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W2 (pid 744) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W3 (pid 1156) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W4 (pid 4412) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W5 (pid 2264) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W6 (pid 872) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W7 (pid 4672) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W8 (pid 4700) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W9 (pid 4660) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W10 (pid 1696) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W11 (pid 4484) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W12 (pid 4944) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W13 (pid 5060) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W14 (pid 968) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W15 (pid 4408) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** DP_FATAL_ERROR => DpWpCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiIWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:00 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:01 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:02 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:03 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:04 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:05 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:06 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:07 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:08 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:09 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Apr 16 05:44:09 2015
------------------------------------------------------------
Current snapshot id: 1
Number of preemptions : 0
|No |Pid |Type|State |Cause|Err|Prio|Sess-Key |Sess-Type|Locked|Sem|Time |Program |Cli|User |Action |Action-Info |
|---+------+----+-------+-----+---+----+----------------+---------+------+---+-----+----------------------------------------+---+------------+--------------------+--------------------|
| 0| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 1| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 2| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 3| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 4| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 5| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 6| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 7| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 8| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 9| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 10| |UPD |WP_KILL| |1 | | | | | | | | | | | |
| 11| |BTC |WP_KILL| |1 | | | | | | | | | | | |
| 12| |BTC |WP_KILL| |1 | | | | | | | | | | | |
| 13| |BTC |WP_KILL| |1 | | | | | | | | | | | |
| 14| |SPO |WP_KILL| |1 | | | | | | | | | | | |
| 15| |UP2 |WP_KILL| |1 | | | | | | | | | | | |
Queue Statistics Thu Apr 16 05:44:09 2015
------------------------------------------------------------
Number of lost wakeup datagrams: 0
Max. number of queue elements : 14000
NOWP: 0 (peak 5, writeCount 8, readCount 😎
DIA: 4 (peak 4, writeCount 4, readCount 0)
UPD: 0 (peak 0, writeCount 0, readCount 0)
ENQ: 0 (peak 0, writeCount 0, readCount 0)
BTC: 0 (peak 0, writeCount 0, readCount 0)
SPO: 0 (peak 0, writeCount 0, readCount 0)
UP2: 0 (peak 0, writeCount 0, readCount 0)
Session queue dump (high priority, 1 elements, peak 1):
-1 <- 26 < EmbryoQueue_DIA> -> -1
Session queue dump (normal priority, 0 elements, peak 0):
Session queue dump (low priority, 0 elements, peak 0):
Dump of queue <EmbryoQueue_DIA> in slot 26 (4 requests, port=0):
-1 <- 4 (rq_id 7, DIA, REQ_HANDLER_AUTOTH) -> 5
4 <- 5 (rq_id 9, DIA, REQ_HANDLER_MSADM) -> 2
5 <- 2 (rq_id 13, DIA, REQ_HANDLER_AUTOABAP) -> 3
2 <- 3 (rq_id 15, DIA, REQ_HANDLER_BGRFC_WATCHDOG) -> -1
Infos about some special queues:
Queue <DispatcherQueue> in slot 0 (port=59767) has no requests
Queue <GatewayQueue> in slot 1 (port=0) has no requests
Queue <IcmanQueue> in slot 2 (port=51399) has no requests
Queue <StartServiceQueue> in slot 3 (port=0) has no requests
Logon Table Thu Apr 16 05:44:09 2015
------------------------------------------------------------
No logons/sessions found
CA Blocks
0 INVALID -1
1 ca_blk slots of 6000 in use, 1 currently unowned (in request queues)
NiIWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:10 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:11 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:12 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:13 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:14 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (5000ms)
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
DpHalt: shutdown server >SAPVIAMSAZURE_ECC_00 < (normal)
DpUpdateStatusFile: update status file G:\usr\sap\ECC\DVEBMGS00\work\disp+work.status, unique number = 2
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=110,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
NiMyHostName: hostname = 'SAPVIAMSAZURE'
NiHLGetNodeAddr: found hostname 'SAPVIAMSAZURE' in cache
NiIGetNodeAddr: hostname 'SAPVIAMSAZURE' = addr 100.79.22.46
NiHLGetHostName: found address 100.79.22.46 in cache
NiIGetHostName: addr 100.79.22.46 = hostname 'SAPVIAMSAZURE.SAPVIAMSAZURE.i4.internal.cloudapp.net' (fq)
DpMsUpdateLogon: dp_service: sapdp00
NiSrvLGetServNo: found service name 'sapdp00' in cache
NiIGetServNo: servicename 'sapdp00' = port 3200
DpMsUpdateLogon: set LB=0
MsIBuildLogonData: prot = MS_LOGON_DIAG (2)
MsIBuildLogonData: port = 3200 (4)
MsIBuildLogonData: addr (IPv4) = 100.79.22.46 (8)
MsIBuildLogonData: host = SAPVIAMSAZURE.SAPVIAMSAZURE.i4.internal.cloudapp.net (66)
MsIBuildLogonData: misc = LB=0 (72)
MsIBuildLogonData: addr (IPv6) = 100.79.22.46 (90)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=206,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 206 bytes
MsISnd2: send msg (ms hdr/msg 110/96 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_SET_LOGON ok
Send 96 bytes to MSG_SERVER
MS_SET_LOGON : asynchronous call
DpMsUpdateLogon: gw_service: sapgw00
NiSrvLGetServNo: found service name 'sapgw00' in cache
NiIGetServNo: servicename 'sapgw00' = port 3300
MsIBuildLogonData: prot = MS_LOGON_RFC (2)
MsIBuildLogonData: port = 3300 (4)
MsIBuildLogonData: addr (IPv4) = 100.79.22.46 (8)
MsIBuildLogonData: host = SAPVIAMSAZURE.SAPVIAMSAZURE.i4.internal.cloudapp.net (66)
MsIBuildLogonData: addr (IPv6) = 100.79.22.46 (86)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=202,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 202 bytes
MsISnd2: send msg (ms hdr/msg 110/92 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_SET_LOGON ok
Send 92 bytes to MSG_SERVER
MS_SET_LOGON : asynchronous call
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (4004) (SOFT_KILL)
DpHalt: stop icman
killing process (4664) (SOFT_KILL)
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives (PID:4004 HANDLE:1144)
DpHalt: waiting for termination of gateway ...
NiIWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
Thu Apr 16 13:44:15 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4004 HANDLE:1144 rc:0x0)
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:4664 HANDLE:1152)
DpHalt: waiting for termination of icman ...
NiIWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:16 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4664 HANDLE:1152)
DpHalt: waiting for termination of icman ...
NiIWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:17 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4664 HANDLE:1152 rc:0x0)
DpStartStopMsg: send stop message (myname is >SAPVIAMSAZURE_ECC_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SAPVIAMSAZURE_ECC_00, sapsysnr= 0, hostname=SAPVIAMSAZURE
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00007FF6AF2244E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 00007FF6AF222060
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpRqCreate: creating REQ_HANDLER_ADM request (rq_id 18, slot 13)
DpRqConvertToNetForm: converted from intern to net (164 bytes, reqRc 0), rq_id 18
DpRqFree: freeing REQ_HANDLER_ADM request (rq_id 18, slot 13)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=866,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 866 bytes
MsISndTypeOnce: send msg (ms hdr/msg 110/756 bytes) to MSG_SERVER, type 1
DpStartStopMsg: stop msg sent to message server o.k.
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 353 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 353
NiBufReceive starting
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 353 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 353
NiBufReceive starting
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
DpHalt: received 4 bytes from message server
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 353 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 353
NiBufReceive starting
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 353 recv would block (errno=EAGAIN)
NiIRead: read for hdl 353 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=114,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiIRead: hdl 353 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 353 (r)
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 353 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 353
NiBufReceive starting
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 353 recv would block (errno=EAGAIN)
Thu Apr 16 13:44:18 2015
NiIPeek: peek for hdl 353 timed out (r; 1000ms)
NiIRead: read for hdl 353 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpMessageSer 2038]
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=110,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (SAPVIAMSAZURE / 3901)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 353 in set0
SiSelNSet: set events of sock 1100 to: ---
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
NiBufISelRemove: remove hdl 353 from set0
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
SiSelNRemove: removed sock 1100
NiSelIRemove: removed hdl 353
DpDelSocketInfo: del info for nihdl 353 (pos/type=44/4)
DpMBufClearGlobalHighLoadCounter: reset global load flags
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00007FF6AF2244E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF6AF2251A0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF6AF2251A0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpRqCreate: creating REQ_HANDLER_MSADM request (rq_id 19, slot 14)
DpCaLockBlk: locked ca_blk 1
DpRqSendRequest: REQ_HANDLER_MSADM (rq_id 19) from DISP to local DISP
DpCaGiveUpOwnerOfBlk: give up ownership of ca_blk 1
rq_id 19
-OUT- ca_blk 1 len 348
-OUT- reqHdlId REQ_HANDLER_MSADM
-OUT- sender address:
-OUT- type LOCAL
-OUT- agentType DISP
-OUT- receiver address:
-OUT- type LOCAL
-OUT- agentType DISP
RqQAddRequest: Add request rq_id 19 (NOWP) to queue <DispatcherQueue> in slot 0 at the end
Dump of queue <DispatcherQueue> in slot 0 (2 requests, in use, port=59767):
-1 <- 0 (rq_id 17, NOWP, REQ_HANDLER_ICMAN_OPCODE) -> 1
0 <- 1 (rq_id 19, NOWP, REQ_HANDLER_MSADM) -> -1
RqQQueueNotifySelectableHandle: Reuse NI connection for queue <DispatcherQueue> in slot 0 on port 59767 (10026)
RqQQueueNotifySelectableHandle: Signal selectable handle for queue <DispatcherQueue> in slot 0 on port 59767 (id=7)
NiDgHdlSend: hdl 361 sent 1 of 1 bytes to 127.0.0.1:59767
RqQQueueGetNumberOfRequests: Queue <DispatcherQueue> in slot 0 contains 2 requests of type NOWP
DpRqPutIntoQueue: put request into DISP queue (workerType 0, prio LOW, rq_id 19), queue has 2 requests
DpRqFree: freeing REQ_HANDLER_MSADM request (rq_id 19, slot 14)
DpMBufTypeMod: MBUF component DOWN (event=MBUF_DPEVT_DOWN)
NiICloseHandle: shutdown and close hdl 353/sock 1100
NiBufIClose: clear extension for hdl 353
MsIDetach: detach MS-system (SAPVIAMSAZURE / 3901)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3136) [dpInit.c 3393]
DpHalt: Good Bye .....
Hi Zac,
Could you share updated trans.log & dev_w0 log file from the system ?
Thanks,
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Gaurav,
Thanks for your quick reply.
My understanding of getting dev_w0 is to navigate to /usr/sap/<SID>/DVEBMGS<SYSNO>/work . Unfortunately my permission levels on the VM are not allowing me too see sap file. I will contact the administrator and get the correct permissions so I can share with you. Unfortunately this may take some time but endeavor to share with you ASAP.
As for the trans.log i read you get this from the CMD by entering "R3trans -d". Is this correct - it is not recognized? I will check with the admin
Thanks again for your help and i wish i could share with you now but hopefully it will be soon enough
>> I have just upgraded our version of SQL Server from Evaluation to Standard
Are you using Standard Edition of SQL server?
If yes, then you should check the below note.
62988 - Service packs for MS SQL Server
regards,
pavan
Hi,
I was able to get in with user eccadm and got the below logs. Obviously the issue is the SQL Server and i guess my question moves to how do a point SAP to the installation on SQL Server
Thanks
r3trans -d
C:\Users\eccadm>r3trans -d
This is r3trans version 6.24 (release 741 - 10.10.13 - 20:13:08 ).
unicode enabled version
2EETW169 no connect possible: "DBMS = MSSQL
ER = 'SAPVIAMSAZURE' DBNAME = 'ECC' --- SYSTEM = '"
r3trans finished (0012).
dev_w0
---------------------------------------------------
trc file: "dev_w0", trc level: 1, release: "741"
---------------------------------------------------
*
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
*
M sysno 00
M sid ECC
M systemid 562 (PC with Windows NT)
M relno 7410
M patchlevel 0
M patchno 11
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\SAPVIAMSAZURE\sapmnt\ECC\SYS\profile\ECC_DVEBMGS00_SAPVIAMSAZURE
M pid 4164
M
M
M Thu Apr 16 15:02:31 2015
M kernel runs with dp version 197000(ext=117000) (@(#) DPLIB-INT-VERSION-197000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 4164) [dpInit.c 692]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm) 22848 (1088)
M DpShMCreate: sizeof(tm_adm) 49394544 (245744)
M DpShMCreate: sizeof(ca_adm) 432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm) 7583152 (14912)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm) 520080 (1016)
M DpShMCreate: sizeof(vmc_adm) 0 (3208)
M DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm) (ft=25664/hd=64/rec=232)
M DpShMCreate: sizeof(gw_adm) 64
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000011B00050, size: 58350720)
M DpShMCreate: allocated sys_adm at 0000000011B00250
M DpShMCreate: allocated wp_adm_list at 0000000011B11CE0
M DpShMCreate: allocated wp_adm at 0000000011B12000
M DpShMCreate: allocated tm_adm_list at 0000000011B17B40
M DpShMCreate: allocated tm_adm at 0000000011B17D80
M DpShMCreate: allocated ca_adm at 0000000014A332F0
M DpShMCreate: allocated comm_adm at 0000000014A9CC70
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 00000000151D8420
M DpShMCreate: allocated vmc_adm_list at 00000000152575B0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000015257850
M DpShMCreate: allocated j2ee_adm at 0000000015257A90
M DpShMCreate: allocated ca_info at 0000000015258BF0
M DpShMCreate: allocated wall_adm (ft) at 0000000015258E30
M DpShMCreate: allocated wall_adm (fi) at 00000000152632F0
M DpShMCreate: allocated wall_adm (head) at 0000000015273C80
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000015273EC0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000015289280
M DpShMCreate: allocated amc_rec_adm (head) at 0000000015299C10
M DpShMCreate: allocated websocket_adm (ft) at 0000000015299E50
M DpShMCreate: allocated websocket_adm (head) at 00000000152A0490
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000014A9CC70/ft=0000000014A9CC80/fi=00000000151BB100)
M DpSockAttachTable: attached sock table (header=00000000151D8420/ft=00000000151D8430)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Thu Apr 16 15:02:32 2015
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Apr 16 15:02:35 2015
M ThInit: running on host SAPVIAMSAZURE
I MtxInit: 0 0 0
M
M Thu Apr 16 15:02:36 2015
M calling db_connect ...
B Loading DB library 'G:\usr\sap\ECC\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'G:\usr\sap\ECC\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'G:\usr\sap\ECC\DVEBMGS00\exe\dbmssslib.dll' is "741.10", patchlevel (0.10)
C Callback functions for dynamic profile parameter registered
C Thread ID:4168
C Thank You for using the SLODBC-interface
C Using dynamic link library 'G:\usr\sap\ECC\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C SAP patchlevel 0
C SAP patchno 11
C Last MSSQL DBSL patchlevel 0
C Last MSSQL DBSL patchno 10
C Last MSSQL DBSL patchcomment Impersonate Session Security Context error (1937447)
C ODBC Driver chosen: ODBC Driver 11 for SQL Server native
C lpc:(local) connection used on SAPVIAMSAZURE
C
C Thu Apr 16 15:02:37 2015
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (18456) [28000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Login failed for user 'SAPVIAMSAZURE\SAPServiceECC'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (4060) [42000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Cannot open database "ECC" requested by the login. The login failed.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (18456) [28000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Login failed for user 'SAPVIAMSAZURE\SAPServiceECC'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (4060) [42000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Cannot open database "ECC" requested by the login. The login failed.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (18456) [28000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Login failed for user 'SAPVIAMSAZURE\SAPServiceECC'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (4060) [42000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Cannot open database "ECC" requested by the login. The login failed.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (233) [08S01] [Microsoft][ODBC Driver 11 for SQL Server]Shared Memory Provider: No process is on the other end of the pipe.
C
C native_db_err 233 severity 0 errclass set to DBSL_EC_RESTART
C sl_glob.dbsl_ca.errclass set to DBSL_EC_RESTART
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (233) [08S01] [Microsoft][ODBC Driver 11 for SQL Server]Communication link failure
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (18456) [28000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Login failed for user 'SAPVIAMSAZURE\SAPServiceECC'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (4060) [42000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Cannot open database "ECC" requested by the login. The login failed.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (18456) [28000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Login failed for user 'SAPVIAMSAZURE\SAPServiceECC'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (4060) [42000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Cannot open database "ECC" requested by the login. The login failed.
C Connection 0 failed using Driver={ODBC Driver 11 for SQL Server};Server=SAPVIAMSAZURE;AutoTranslate=no;Trusted_Connection=yes;WSID=SAPVIAMSAZURE;APP=R3D00 comm rd ODBC;Database=ECC;
C
B ***LOG BY2=> sql error 18456 performing CON [dbsh 1252]
B ***LOG BY0=> Login failed for user 'SAPVIAMSAZURE\SAPServiceECC'. [dbsh 1252]
B ***LOG BY2=> sql error 18456 performing CON [dblink 550]
B ***LOG BY0=> Login failed for user 'SAPVIAMSAZURE\SAPServiceECC'. [dblink 550]
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 75]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c 2195]
M
M Info for wp 0
M
M pid = 4164
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M workerType = DP_WORKER_DIAWP
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M report = > <
M action = 0
M tab_name = > <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPVIAMSAZURE_ECC_00 on host SAPVIAMSAZURE (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 16 15:02:37 2015
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2385
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 4164) [dpnttool.c 335]
Hi Zac,
If possible try to patch the kernel with latest available & refer SAP Note 1937447 - Impersonate Session Security Context error
Try to restart complete system once & share the trans.log file as well .
Hope this will help you.
Regards,
you have bad credentials to connect to MSSQL:
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (18456) [28000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Login failed for user 'SAPVIAMSAZURE\SAPServiceECC'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2488]
C (4060) [42000] [Microsoft][ODBC Driver 11 for SQL Server][SQL Server]Cannot open database "ECC" requested by the login. The login failed.
Hi Gaurav,
Sorry for the delay - had a training course this morning and then had a lunch on.
Im having authentication issues with the link you provided - might be because im currently sorting out my SAP partner account....
Im having trouble locating the trans.log file - do you know where i can find it? does that link explain how to re-set the MSSQL credentials?
Thanks
Thanks Pavan - Again!
There it is!
Standard Edition (64-bit) on Windows NT
SAP supports only Enterprise Editions.
As per note 62988: All supported SQL Server versions are tested by SAP in the Enterprise Edition only. Therefore, only the Enterprise Edition is supported. The SAP support may not be able to solve problems that occur with other editions.
This is also mentioned in 1966681 - Release planning for Microsoft SQL Server 2014
User | Count |
---|---|
96 | |
11 | |
11 | |
10 | |
9 | |
8 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.